RESUMO
Bioabsorbable materials have a wide range of applications, such as scaffolds for regenerative medicine and cell transplantation therapy and carriers for drug delivery systems. Therefore, although many researchers are conducting their research and development, few of them have been used in clinical practice. In addition, existing bioabsorbable materials cannot bind to the body's tissues. If bioabsorbable materials with an adhesive ability to biological tissues can be made, they can ensure the mixture remains fixed to the affected area when mixed with artificial bone or other materials. In addition, if the filling material in the bone defect is soft and uncured, resorption is rapid, which is advantageous for bone regeneration. In this paper, the development and process of a new bioabsorbable material "Phosphorylated pullulan" and its capability as a bone replacement material were demonstrated. Phosphorylated pullulan, which was developed based on the tooth adhesion theory, is the only bioabsorbable material able to adhere to bone and teeth. The phosphorylated pullulan and ß-TCP mixture is a non-hardening putty. It is useful as a new resorbable bone replacement material with an adhesive ability for bone defects around implants.
RESUMO
OBJECTIVES: To evaluate the phase composition, microstructure, optical properties and mechanical properties of eight commercially available multilayer and monolayer monolithic dental zirconias. METHODS: Five commercial 3Y-TZP (GC ST, GC HT [GC, Tokyo Japan]; Katana ML, Katana HT [Kuraray Noritake] and Lava Plus [3M Oral Care]) and three Y-PSZ (Katana STML, Katana UTML [Kuraray Noritake]; GC UHT [GC, Tokyo Japan]) zirconia ceramic grades were cut in plate-shaped specimens, sintered according to the manufacturer's instructions and mirror polished. The zirconia chemical composition was determined using X-ray fluorescence (XRF), phase composition was characterized using X-ray diffraction (XRD), while the grain size was measured using scanning electron microscopy (SEM). The translucency Parameter (TP) and Contrast Ratio (CR) were measured with a spectrophotometer (n = 10/group). The indentation fracture toughness (n = 10), Vickers hardness (n = 10) and biaxial strength (n = 20) of the sintered ceramics were assessed. The stress distribution during biaxial testing was assessed by Finite element analysis (FEA). Statistical analysis involved one-way ANOVA and post-hoc Tukey's HSD test and Pearson correlation test (α = 0.05). RESULTS: FEA showed that the stress distribution in plate shape specimens was the same as for disks, rationalizing the use of plates for biaxial strength testing. As expected, higher quantities of Y2O3 were related to a higher cubic ZrO2 phase content and lower tetragonality t-ZrO2, which improved translucency but diminished flexural strength and toughness. While there was no significant correlation between grain size and other material properties, addition of pigments to the zirconia grade statistically negatively affected hardness. CONCLUSION: Even though an improvement in strength and translucency could be recorded for the last Y-TZP generation, future research still needs to strive for combined improvement of optical properties and mechanical reliability of zirconia ceramics.
Assuntos
Materiais Dentários , Ítrio , Cerâmica , Materiais Dentários/química , Teste de Materiais , Reprodutibilidade dos Testes , Propriedades de Superfície , Zircônio/químicaRESUMO
A two-bottle self-curing universal adhesive (Tokuyama Universal Bond; Tokuyama Dental) that does not require a long waiting time or light curing after application of the bonding material has been developed. This study aimed to evaluate the influence of tooth and adhesive temperature during the bonding procedure on the effectiveness of dentin bonding. The results showed that the tooth temperature affected the effectiveness of the dentin bonding; therefore, to determine the precise bonding ability in the laboratory, the temperature of the tooth must be raised until it is the same as that of the oral cavity. In addition, the temperature of the material did not affect bonding effectiveness; this result confirms that it does not matter whether the refrigerated product is used soon after its removal from the refrigerator or after it reaches room temperature in the clinic.
Assuntos
Colagem Dentária , Adesivos Dentinários , Adesivos/química , Colagem Dentária/métodos , Cimentos Dentários , Dentina , Adesivos Dentinários/química , Teste de Materiais/métodos , Cimentos de Resina/química , Temperatura , Resistência à TraçãoRESUMO
PURPOSE: This study examined four cleaning methods and three chemical treatments for artificial saliva-contaminated fiber posts in terms of bonding durability to resin composite core materials. METHODS: Non-contaminated fiber posts (Tokuyama FR Post, Tokuyama Dental) and those contaminated (GC Fiber Post, GC) with artificial saliva (Saliveht Aerosol, Teijin Pharma) were used. Washing and drying (WD), alcohol cleaning (AlC), H3PO4 etching (P/WD), alumina blasting (B/D) for decontamination and silanization (Clearfil Ceramic Primer Plus, Kuraray Noritake Dental, Si), resin priming (HC Primer, Shofu, MMA), and bonding resin application (Clearfil Universal Bond Quick, Kuraray Noritake Dental, BR) for chemical treatment were performed. The treated fiber post was planted inside a cylindrical tube and filled with resin composite (DC Core Automix ONE, Kuraray Noritake Dental). The specimen was sectioned, and a push-out test was performed after 24 h, 1 month, and 3 months. The fracture surface was observed using a scanning electron microscope (SEM). RESULTS: Adhesion between the non-contaminated fiber post and resin composite did not improve by silanization and decreased by alumina blasting. SEM observations revealed a fractured glass fiber by alumina blasting. Saliva contamination decreased the bond strength between the fiber post and resin composite; however, recovery was achieved by WD, Alc, P/WD, and B/D. Compared to Si, BR (P = 0.009) was effective in restraining the long-term durability of bonding, whereas MMA (P = 0.99) was not. CONCLUSION: The application of bonding resin after alcohol cleaning is the most convenient and effective clinical procedure for fiber post surface treatment.
Assuntos
Colagem Dentária , Técnica para Retentor Intrarradicular , Óxido de Alumínio/química , Resinas Compostas/química , Colagem Dentária/métodos , Análise do Estresse Dentário , Teste de Materiais , Microscopia Eletrônica de Varredura , Cimentos de Resina/química , Saliva , Saliva Artificial , Propriedades de SuperfícieRESUMO
PURPOSE: To analyze the causes of debonding of computer-aided design/computer-aided manufacturing (CAD/CAM) indirect resin composite premolar crowns with a focus on the morphological factors of the crown and abutment teeth. METHODS: The clinical courses of 109 CAD/CAM indirect resin composite crowns were observed, and the patients' background characteristics, crown locations, luting methods, types of abutments, distal-most/non-distal-most molars, and types of resin blocks were confirmed. To investigate the influence of the morphology of the crown and abutment teeth, the 1) vertical dimension of the abutment teeth, 2) taper, and 3) thickness of the crown occlusal surface during events were measured from the three-dimensional digital data. The Kaplan-Meier method and multivariable Cox proportional hazard model were used for the statistical analyses. The nonlinearity of the effect of each comparison factor was included in the model. RESULTS: Complications included 21 debonding cases, two crown fractures, five root fractures, and two core debondings. The cumulative no-debonding and no-crown-fracture rate over 1423 days (3 years and 11 months) was 77.4%. The multivariable Cox regression analysis revealed that the abutment teeth type of tooth (first or second premolar) (P = 0.02) and luting materials (P < 0.01) significantly influenced the debonding frequency. All morphological factors (1-3) significantly influenced the debonding. The hazard ratios and nonlinear graph indicated that the crown thickness was less effective than the vertical dimension and taper. CONCLUSION: The combination analysis of clinical outcomes and 3D digital data revealed that preparation of the abutment is important for avoiding crown debonding.
Assuntos
Desenho Assistido por Computador , Planejamento de Prótese Dentária , Dente Pré-Molar , Resinas Compostas , Coroas , Porcelana Dentária , Planejamento de Prótese Dentária/métodos , Humanos , Teste de MateriaisRESUMO
PURPOSE: This study aims to confirm the usefulness of active acoustic emission (Active AE) for reproducible and non-invasive generation of physical external force which is required for conventional AE. METHODS: Experiment 1: A root dentin-resin adhesive interface was observed. The post space was filled with a dual-cure resin composite core material with and without adhesive. The vibration characteristics of the data obtained from the time-frequency analysis were evaluated. Experiment 2: A crown-abutment tooth adhesive interface was observed. Adhesive resin cement was used for luting the crown and adhesion states in the same specimen over time were analyzed with three measurements: at trial-fitting, immediately after luting, and 2 weeks after luting. Data were subjected to time-frequency analysis and relationships between amplitude (indicating loudness) and frequency (indicating the sound component) were analyzed. RESULTS: Experiment 1: Time-frequency analysis confirmed multiple peak frequencies for each specimen without adhesive and monomodal peak frequency in all specimens using adhesive. Experiment 2: Two weeks after luting, all specimens showed a single major peak except one which showed multiple weak peaks. The three-dimensional visualization of time-frequency analysis revealed one specimen with multiple weak peaks while all others displayed a single, low-amplitude band at 2 weeks after luting. CONCLUSION: The state of the adhesive interface can be evaluated using active AE. This basic technique may prove useful to evaluate changes in the adhesive interface of prostheses over time.
Assuntos
Colagem Dentária , Adesivos Dentinários , Acústica , Resinas Compostas , Cimentos Dentários , Dentina , Teste de Materiais , Cimentos de Resina , Estresse Mecânico , Propriedades de SuperfícieRESUMO
PURPOSE: To evaluate the hydrolytic stability of three one-step self-etching adhesives (1-SEAs) bonded to dentin through bond strength testing and ultra-morphological interfacial analysis before and after long-term thermocycling. MATERIALS AND METHODS: Eighteen flattened mid-coronal dentin surfaces of extracted human molars were subjected to bonding treatment using three 1-SEAs (Clearfil S3 Bond, Kuraray (S3), G-Bond, GC (GB), Absolute, Dentsply-Sankin (AB)), after which the bonded surfaces were built up with composite. After storage overnight at 37°C, the specimens were sectioned into slabs and further trimmed into an hourglass shape with an interface area of approximately 1 mm2. The specimens were left untouched (control) or were thermocycled for 100,000 cycles. The microtensile bond strength (µTBS) was measured and the ultrastructure of the adhesive/dentin interface characterized using transmission electron microscopy (TEM). RESULTS: Long-term thermocycling significantly decreased the µTBS of all one-step adhesives tested (p < 0.05, one way ANOVA and Games-Howell test). TEM revealed a similar interfacial ultrastructure before and after thermocycling for S3. For GB, many voids were observed at the interface after 100,000 thermocycles. Regarding AB, collagen fibrils could no longer be clearly observed upon staining, while the adjacent unaffected dentin was rich in voids. CONCLUSION: The bond strength and ultramorphological data demonstrated that the bond of 1-SEAs to dentin degrades with time, although the degree of degradation is obviously material dependent.
Assuntos
Colagem Dentária , Adesivos Dentinários , Dentina , Cimentos de Resina , Condicionamento Ácido do Dente/métodos , Análise de Variância , Análise do Estresse Dentário , Dentina/ultraestrutura , Humanos , Hidrólise , Teste de Materiais , Metacrilatos , Microscopia Eletrônica de Transmissão , Dente Molar , Resistência à TraçãoRESUMO
The effects of silanization and resin primer application on CAD/CAM indirect resin composite block bonding were investigated. KATANA AVENCIA P blocks (Kuraray Noritake Dental) were treated with a silane coupling agent and/or a resin primer. The contact angles (CAs) of resin primer were observed before and after silanization. Panavia V5 (Kuraray Noritake Dental) was built after each treatment. Bond strengths were measured, and the interface was analyzed by energy dispersive X-ray spectroscopy (EDS). The CA showed that silane treatment improved the wettability of the resin primer to the resin block. The combination treatment of the silane and resin primer showed significantly higher bond strength than no treatment, only in the silanization or resin primer group (p<0.001 each). EDS analysis showed that the resin primer penetrated both cement and block sides. The combination of the silane and resin primer improved bonding effectiveness between the resin block and resin cement.
Assuntos
Colagem Dentária , Silanos , Resinas Compostas , Teste de Materiais , Cimentos de ResinaRESUMO
This study evaluated the bonding effectiveness of a newly developed two-step hydrophobic bonding material. Three groups using different bonding systems were compared: BZF group, using the new bonding system (BZF-29; GC, Tokyo, Japan); GPB group, using a one-step bonding system (G-Premio Bond; GC); and SE2 group, using a two-step bonding system (CLEARFIL SE Bond 2; Kuraray Noritake Dental, Tokyo, Japan). Microtensile bond strength (µTBS) was measured after storage in water for 24 h, 3 months and 6 months (n=25/group). Fracture surfaces were observed under scanning electron microscopy. The BZF group showed significantly higher µTBS than the other groups (p<0.001). Dominant failure patterns were cohesive failure for the BZF group (48-84%), mixed failure for the SE2 group (48-60%) and interface failure between adhesive and resin composite for the GPB group (48-52%). The hydrophobicity of the BZF-29 bonding system improves the long-term bonding effectiveness between adhesive and resin composite.
Assuntos
Colagem Dentária , Adesivos Dentinários , Resinas Compostas , Cimentos Dentários , Dentina , Teste de Materiais , Microscopia Eletrônica de Varredura , Cimentos de Resina , Resistência à TraçãoRESUMO
Newly discovered Erwinia amylovora phages PEar1, PEar2, PEar4 and PEar6 were isolated from three different orchards in North Tunisia to study their potential as biocontrol agents. Illumina sequencing revealed that the PEar viruses carry a single-strand DNA genome between 6608 and 6801 nucleotides and belong to the Inoviridae, making them the first described filamentous phages of E. amylovora. Interestingly, phage-infected cells show a decreased swimming and swarming motility and a cocktail of the four phages can significantly reduce infection of E. amylovora in a pear bioassay, potentially making them suitable candidates for phage biocontrol.
RESUMO
The effect of cleaner containing 10-methacryloyloxydecyl dihydrogen phosphate (MDP) for removing temporary cement remnants on dentin surface was evaluated. Flat dentin surfaces were wet-polished (Co) and HY-BOND temporary cement hard (Shofu) was applied to the surface. This temporary cement was removed using an air-scaler (Sc), brush (Br), or phosphoric acid and NaOCl (NC). A prototype cleaner containing MDP (Kuraray Noritake Dental, Tokyo, Japan) was used with agitation mode (MC+AG). KATANA Avencia block (Kuraray Noritake Dental) was luted with SA Cement Plus Automix (Kuraray Noritake Dental). Co showed significantly higher bond strength than Sc or Br (p<0.001 each). Bond strengths with NC (p=0.99) and MC+AG (p=0.38) did not differ significantly from that with Co. Transmission electron microscopy revealed sufficient interaction of MC+AG. Cleaner containing MDP can effectively remove temporary cement by agitation, and can be expected to improve the chemical bonding ability by binding more MDP to dentin.
Assuntos
Colagem Dentária , Cimentos de Resina , Dentina , Adesivos Dentinários , Teste de Materiais , Metacrilatos , Cimento de Policarboxilato , Propriedades de Superfície , Resistência à TraçãoRESUMO
Tribochemical silica coating (TSC) is commonly used to pretreat zirconia surfaces prior to luting. Although many studies demonstrate an adhesion-promoting effect of TSC on zirconia, its actual interaction mechanism has not been fully elucidated. We therefore characterized the ultrastructure of TSC-treated zirconia and tested shear-bond strength. STEM/EDS disclosed a micro-roughened zirconia surface partially covered with fused Al and Si, while residual unfused silica particles could also still be detected. TSC-treated zirconia having received the solely silane primer exhibited a significantly lower shear-bond strength than zirconia on which the combined 10-MDP/silane primer was applied. SEM fracture analysis revealed residual silica particles on both the zirconia and cement sides. Correlative ultrastructural and chemical surface characterization revealed that TSC deposited an inhomogeneous silica layer on the zirconia surface, which explains why the solely silane coupling agent was less effective than the combined 10-MDP/silane ceramic primer for bonding to zirconia pretreated by TSC.
Assuntos
Colagem Dentária/métodos , Materiais Dentários/química , Adesivos Dentinários/química , Cimentos de Resina/química , Dióxido de Silício/química , Zircônio/química , Óxido de Alumínio/química , Materiais Revestidos Biocompatíveis/farmacologia , Cimentos Dentários , Teste de Materiais , Metacrilatos , Microscopia Eletrônica , Resistência ao Cisalhamento , Propriedades de SuperfícieRESUMO
OBJECTIVE: To bridge the gap between the current alarming literature on resin-based dental materials and the limited clinical observations, more precise knowledge on the actual quantity of released compounds should be acquired. The objective of this study was to quantify the long-term elution of various compounds from resin-based dental composites during one year. METHODS: Eight materials were investigated: G-aenial Anterior, G-aenial Posterior, Venus, Venus Pearl, Venus Diamond, Ceram X mono, Dyract and Filtek Supreme XTE. Cylindrical specimens (6 mm diameter, 2 mm thickness) were immersed in 1mL of three different extraction solutions (water, artificial saliva or ethanol) and stored in the dark at 37°C. Every week, the extraction solution was refreshed. The samples were analyzed using ultra-performance liquid chromatography-tandem mass spectrometry. RESULTS: BisEMA3, BisEMA6, BisEMA10, BisGMA, CQ, HEMA, TCD-DI-HEA, TEGDMA, and UDMA were quantified in the samples. Depending on the composite and the extraction solution, certain monomers (BisGMA, HEMA and UDMA) were able to continuously elute from the materials, up until 52 weeks after initial immersion. Monomer elution was clearly higher when ethanol was used as extraction solution. It could be demonstrated that the tested composites continued to release small quantities of monomers over longer periods when a continuous refreshing protocol is followed. SIGNIFICANCE: Even if monomer elution may not lead to a risk at short term, the potential long-term toxicity should be further investigated. Long-term elution and subsequent chronic exposure to monomers from resin-based dental materials should not be neglected when assessing the overall human health risks.
Assuntos
Resinas Compostas , Materiais Dentários , Humanos , Teste de Materiais , Metacrilatos , Saliva ArtificialRESUMO
OBJECTIVE: In order to understand the mechanism of dentin sensitivity to tactile stimuli, the purpose of this study was to evaluate possible permanent deformation of dentin produced by scratching dentin surfaces with clinically-relevant forces. METHODS: Midcoronal dentin was prepared from twenty human teeth and polished to 4000-grit and ultrasonicated. The dentin surface of each specimen was scratched under forces ranging from 30 to 100 centi-Newtons (cN). The depth of the grooves were measured with a profilometer and the overall hardness of dentin in the vicinity of the grooves was measured. Additional dentin specimens were prepared for SEM evaluation. RESULTS: Dentin hardness was constant and no statistical difference was found among the specimens. Statistically significant differences in groove width and depth were found when increasing force was applied to the dental explorer tip. The depth of the groove ranged from 0.21+/-0.09 microm for the 30 cN group to 1.27+/-0.39 microm for the 100 cN group. The width of the groove ranged from 19.3+/-4.0 microm for the 30 cN group to 43.0 microm for the 10 0 cN group. CONCLUSIONS: (1). The threshold force necessary to create scratches in dentin with a dental explorer was 30 cN or a compressive stress of 1003 MPa. As this exceeds the crushing strength of dentin, this force produces plastic deformation of dentin; (2). Theoretical calculations indicated that even the highest scratching forces (100 cN) could not induce sufficient fluid flow to activate pulpal mechanoreceptors, although it could induce sufficient elastic deformation to theoretically shift dentinal fluid at a rate sufficient to activate mechanoreceptors; (3). The results of this work may lend support the hydrodynamic theory in that scratching of dentin surfaces causes both elastic and plastic deformation of dentin that may displace dentinal fluid toward the pulp where it could activate mechanoreceptors.
Assuntos
Sensibilidade da Dentina/fisiopatologia , Dentina/fisiopatologia , Dentina/ultraestrutura , Líquido Dentinal/fisiologia , Elasticidade , Humanos , Mecanorreceptores/fisiologia , Microscopia Eletrônica de Varredura , Estresse MecânicoRESUMO
Due to the high corrosion resistance and strength to density ratio titanium is widely used in industry, and also in a gamut of medical applications. Here we report for the first time on our development of a titanium passivation layer sensor that makes use of surface plasmon resonance (SPR). The deposited titanium metal layer on the sensor was passivated in air, similarly to titanium medical devices. Our "Ti-SPR sensor" enables analysis of biomolecule interactions with the passivated surface of titanium in real time. As a proof of concept, corrosion of a titanium passivation layer exposed to acid was monitored in real time. The Ti-SPR sensor can also accurately measure the time-dependence of protein adsorption onto the titanium passivation layer at sub-nanogram per square millimeter accuracy. Besides such SPR analyses, SPR imaging (SPRI) enables real time assessment of chemical surface processes that occur simultaneously at "multiple independent spots" on the Ti-SPR sensor, such as acid corrosion or adhesion of cells. Our Ti-SPR sensor will therefore be very useful to study titanium corrosion phenomena and biomolecular titanium-surface interactions with application in a broad range of industrial and biomedical fields.