RESUMO
Designing and synthesizing fullerene bisadducts with a higher-lying conduction band minimum is promising to further improve the device performance of tin-based perovskite solar cells (TPSCs). However, the commonly obtained fullerene bisadduct products are isomeric mixtures and require complicated separation. Moreover, the isomeric mixtures are prone to resulting in energy alignment disorders, interfacial charge loss, and limited device performance improvement. Herein, we synthesized single-isomer C60- and C70-based diethylmalonate functionalized bisadducts (C60BB and C70BB) by utilizing the steric-hindrance-assisted strategy and determined all molecular structures involved by single crystal diffraction. Meanwhile, we found that the different solvents used for processing the fullerene bisadducts can effectively regulate the molecular packing in their films. The dense and amorphous fullerene bisadduct films prepared by using anisole exhibited the highest electron mobility. Finally, C60BB- and C70BB-based TPSCs showed impressive efficiencies up to 14.51 and 14.28%, respectively. These devices also exhibited excellent long-term stability. This work highlights the importance of developing strategies to synthesize single-isomer fullerene bisadducts and regulate their molecular packing to improve TPSCs' performance.
RESUMO
Recently, thermally activated delayed fluorescence (TADF) molecules with through-space charge transfer (TSCT) features have been widely applied in developing organic light-emitting diodes with high luminescence efficiencies. The performance of TSCT-TADF molecules depends highly on their molecular structures. Therefore, theoretical investigation plays a significant role in designing novel highly efficient TSCT-TADF molecules. Herein, we theoretically investigate two recently reported TSCT-TADF molecules, 1'-(2,12-di-t-butyl[1,4]benzoxaborinino[2,3,4-kl]phenoxaborinin-7-yl)-10-phenyl-10H-spiro[acridine-9,9'-fluorene] (AC-BO) and 1-(2,12-di-t-butyl[1,4]benzoxaborinino[2,3,4-kl]phenoxaborinin-7-yl)-9',9'-dimethyl-9'H-spiro [fluorene-9,5'-quinolino[3,2,1-de]acridine](QAC-BO). The calculated photophysical properties (e.g. excited state energy levels and luminescence properties) for these two compounds are in good agreement with experimental data. Based on the systematic analysis of structure-performance relationships, we design three novel TSCT-TADF molecules with high molecular rigidity and evident TSCT features, i.e., DQAC-DBO, DQAC-SBO, and DQAC-NBO. They exhibit deep-blue light emissions and fast reverse intersystem crossing rates (KRISCs). Our calculations demonstrate that the nearly coplanar orientation of the donor and acceptor is critical to achieve remarkable KRISCs and fluorescence efficiencies in TSCT-TADF molecules.
RESUMO
Thermally activated delayed fluorescence (TADF) emitters based on the triptycene skeleton demonstrate exceptional performance, superior stability, and low efficiency roll-off. Understanding the interplay between the luminescent properties of triptycene-TADF molecules and their assembly environments, along with their excited-state characteristics, necessitates a comprehensive theoretical exploration. Herein, we predict the photophysical properties of triptycene-TADF molecules in a thin film environment using the quantum mechanics/molecular mechanics method and quantify their substantial dependency on the heavy atom effects and reorganization energies using the Marcus-Levich theory. Our calculated photophysical properties for two recently reported molecules closely align with experimental values. We design three novel triptycene-TADF molecules by incorporating chalcogen elements (O, S, and Se) to modify the acceptor units. These newly designed molecules exhibit reduced reorganization energies and enhanced reverse intersystem crossing (RISC) rates. The heavy atom effect amplifies spin-orbit coupling, thereby facilitating the RISC process, particularly at a remarkably high rate of â¼109 s-1.
RESUMO
Secondary aluminum ash (SAD) disposal is challenging, particularly in developing countries, and presents severe eco-environmental risks. This paper presents the treatment techniques, mechanisms, and effects of SAD at the current technical-economic level based on aluminum ash's resource utilization and environmental properties. Five recovery techniques were summarized based on aluminum's recoverability in SAD. Four traditional utilization methods were outlined as per the utilization of alumina in SAD. Three new utilization methods of SAD were summarized based on the removability (or convertibility) of aluminum nitride in SAD. The R-U-R (recoverability, utilizability, and removability) theory of SAD was formed based on several studies that helped identify the fingerprint of SAD. Furthermore, the utilization strategies of SAD, which supported the recycling of aluminum ash, were proposed. To form a perfect fingerprint database and develop various relevant techniques, future research must focus on an extensive examination of the characteristics of aluminum ash. This research will be advantageous for addressing the resource and environmental challenges of aluminum ash.
Assuntos
Óxido de Alumínio , Alumínio , ReciclagemRESUMO
Designing an efficient modification molecule to mitigate non-radiative recombination at the NiOx/perovskite interface and improve perovskite quality represents a challenging yet crucial endeavor for achieving high-performance inverted perovskite solar cells (PSCs). Herein, we synthesized a novel fullerene-based hole transport molecule, designated as FHTM, by integrating C60 with 12 carbazole-based moieties, and applied it as a modification molecule at the NiOx/perovskite interface. The in-situ self-doping effect, triggered by electron transfer between carbazole-based moiety and C60 within the FHTM molecule, along with the extended π conjugated moiety of carbazole groups, significantly enhances FHTM's hole mobility. Coupled with optimized energy level alignment and enhanced interface interactions, the FHTM significantly enhances hole extraction and transport in corresponding devices. Additionally, the introduced FHTM efficiently promotes homogeneous nucleation of perovskite, resulting in high-quality perovskite films. These combined improvements led to the FHTM-based PSCs yielding a champion efficiency of 25.58% (Certified: 25.04%), notably surpassing that of the control device (20.91%). Furthermore, the unencapsulated device maintained 93% of its initial efficiency after 1000 hours of maximum power point tracking under continuous one-sun illumination. This study highlights the potential of functionalized fullerenes as hole transport materials, opening up new avenues for their application in the field of PSCs.
RESUMO
Developing novel lead-free perovskite materials with suitable bandgaps and superior thermal stability is crucial to boost their applications in next-generation photovoltaic technologies. High throughput screening combined with the first principles method can accurately and effectively screen out promising perovskites. Herein, we select two lead-free all-inorganic halide double perovskite materials Cs2KMI6 (M = Ga, In) from 1026 compounds with the criteria including appropriate structure factors, positive decomposition energies, and suitable direct bandgaps. We investigated the thermal and mechanical stability, geometric and electronic structures, photoelectric properties, and defect formation energies for both perovskites Cs2KMI6 (M = Ga, In). They can exhibit excellent structural formability and stability through the analysis of structure factors, elastic constants, and stable chemical potential regions. In addition, we investigate the defect effects of Cs2KMI6 (M = Ga, In) on the photovoltaic performance by evaluating the defect formation energies and transition energy levels. Based on the HSE06 functional, we calculated the energy band structures of these two compounds and demonstrate the direct bandgaps of 1.69 eV (HSE06) and 2.16 eV (HSE06) for Cs2KGaI6 and Cs2KInI6, respectively. Moreover, we predicted excellent spectroscopic limited maximum efficiencies (SLMEs) of these two perovskites with high light absorption coefficients (around 105 cm-1), for instance, the SLME of Cs2KGaI6 can reach as high as 28.39%.
RESUMO
The development of efficient deep-blue emitters with thermally activated delayed fluorescence (TADF) properties is a highly significant but challenging task in the field of organic light-emitting diode (OLED) applications. Herein, we report the design and synthesis of two new 4,10-dimethyl-6H,12H-5,11-methanodibenzo[b,f][1,5]diazocine (TB)-derived TADF emitters, TB-BP-DMAC and TB-DMAC, which feature distinct benzophenone (BP)-derived acceptors but share the same dimethylacridin (DMAC) donors. Our comparative study reveals that the amide acceptor in TB-DMAC exhibits a significantly weaker electron-withdrawing ability in comparison to that of the typical benzophenone acceptor employed in TB-BP-DMAC. This disparity not only causes a noticeable blue shift in the emission from green to deep blue but also enhances the emission efficiency and the reverse intersystem crossing (RISC) process. As a result, TB-DMAC emits efficient deep-blue delay fluorescence with a photoluminescence quantum yield (PLQY) of 50.4% and a short lifetime of 2.28 µs in doped film. The doped and non-doped OLEDs based on TB-DMAC display efficient deep-blue electroluminescence with spectral peaks at 449 and 453 nm and maximum external quantum efficiencies (EQEs) of 6.1% and 5.7%, respectively. These findings indicate that substituted amide acceptors are a viable option for the design of high-performance deep-blue TADF materials.
RESUMO
PFAS (per- and polyfluoroalkyl substances) are omnipresent in the environment and their transportation and transformation have attracted increased attention. Microplastics are another potential risk substances that can serve as a carrier for ubiquitous pollutants, thus affecting the presence of PFAS in the environment. In this study, the adsorption of perfluorooctane sulfonamide (FOSA) and perfluorooctanoic acid (PFOA) on four microplastics (PE, PVC, PS, and PTFE) and their effect on the photodegradation of FOSA were studied. The adsorption capacity of FOSA by PS was the highest, in similar, PS displayed the highest adsorption capacity in the presence of PFOA. Different effects of pH and salinity on the adsorption of FOSA and PFOA were observed among different microplastics indicating inconsistent interaction mechanisms. Furthermore, FOSA could be photodegraded, with PFOA as the main product, while the presence of microplastics had a negligible effect on the degradation of this contaminant. The results indicated that microplastics could act as PFAS concentrators. Moreover, their photochemical inertias make the pollutants enriched on microplastics more resistant to degradation.
Assuntos
Ácidos Alcanossulfônicos , Poluentes Ambientais , Fluorocarbonos , Poluentes Químicos da Água , Microplásticos , Plásticos , Fotólise , Poluentes Químicos da Água/análise , Fluorocarbonos/análiseRESUMO
The neurodevelopmental process is highly vulnerable to environmental stress from exposure to endocrine-disrupting chemicals. Perfluorinated iodine alkanes (PFIs) possess estrogenic activities, while their potential neurodevelopmental toxicity remains blurry. In the present study, the effects of two PFIs, including dodecafluoro-1,6-diiodohexane (PFHxDI) and tridecafluorohexyl iodide (PFHxI), were investigated in the neural differentiation of the mouse embryonic stem cells (mESCs). Without influencing the cytobiological process of the mESCs, PFIs interfered the triploblastic development by increasing ectodermal differentiation, thus promoting subsequent neurogenesis. The temporal regulation of PFIs in Notch-Hes signaling through the targeting of mmu-miRNA-34a-5p provided a substantial explanation for the underlying mechanism of PFI-promoted mESC commitment to the neural lineage. The findings herein provided new knowledge on the potential neurodevelopmental toxicities of PFIs, which would help advance the health risk assessment of these kinds of emerging chemicals.
Assuntos
Iodo , MicroRNAs , Alcanos , Animais , Diferenciação Celular/fisiologia , Iodetos , Camundongos , Células-Tronco Embrionárias MurinasRESUMO
The certified power conversion efficiency of perovskite solar cells is gradually approaching that of crystalline silicon solar cells. Accordingly, considering the advantages of improved thermal stability and environmental friendliness of lead-free all-inorganic halide double perovskites (LFAIHDPs), they have attracted considerable attention in optoelectronic applications. Herein, we review the recent progress on LFAIHDPs via heterovalent substitution of the lead element, including their geometrical and electronic structures, synthetic processes, and applications in optoelectronic devices. Many experimental and theoretical efforts have been devoted to investigating the thermal stability, defects, and optoelectronic properties of lead-free all-inorganic halide double perovskite materials, which have been presented. Lastly, we discuss the application of machine learning strategies to predict novel perovskite structures with excellent thermal stability and optoelectronic performance.
RESUMO
Porous supramolecular assemblies constructed by noncovalent interactions are promising for adsorptive purification of methane because of their easy regeneration. However, the poor stability arising from the weak noncovalent interactions has obstructed their practical applications. Here, we report a robust and easily regenerated polyhedron-based cationic framework assembled from a metal-organic square. This material exhibits a very low affinity for CH4 and N2 , but captures other competing gases (e.g. C2 H6 , C3 H8 , and CO2 ) with a moderate affinity. These results underpin highly selective separation of a range of gas mixtures that are relevant to natural gas and industrial off-gas. Dynamic breakthrough studies demonstrate its practical separation for C2 H6 /CH4 , C3 H8 /CH4 , CO2 /N2 , and CO2 /CH4 . Particularly, the separation time is ≈11â min g-1 for the C2 H6 /CH4 (15/85 v/v) mixture and ≈49â min g-1 for the C3 H8 /CH4 (15/85 v/v) mixture (under a flow of 2.0â mL min-1 ), respectively, enabling its capability for CH4 purification from light alkanes.
Assuntos
Dióxido de Carbono , Metano , Adsorção , Porosidade , Metais , GasesRESUMO
A family of molecular capsules, {[(Tp*)Fe(CN)3Co(bpyCâN(CH2)7NâCbpy)]2[X]2}·sol (1, X = ClO4, sol = 6DMF; 2, X = PF6, sol = 6DMF; 3, X = OTf, sol = 6DMF; 4, X = BPh4, sol = 2DMF; Tp* = hydrotris(3,5-dimethylpyrazol-1-yl)borate; bpy = 2,2'-bipyridine), were prepared via the Schiff-base condensation of the aldehyde-substituted bpy (bpyCHO) and 1,7-diaminoheptane (H2N(CH2)7NH2). All the complexes contain the same cyanide-bridged cationic square cores ([Fe2Co2]2+), which are encapsuled by the flexible alkyl chains. Variable-temperature single-crystal X-ray diffraction, FT-IR spectra, and magnetic studies reveal the abrupt and complete, thermo- and photo-induced electron-transfer-coupled spin transition for 1-3, while the pure high-spin phase for 4. Such distinct behavior is attributed to the effective long-range cooperative interactions mediated by the intercluster π-π couplings in 1-3, which, however, are significantly blocked in 4 due to the steric effect of interstitial BPh4- anions. Furthermore, the shift in the thermally induced transition temperatures of 254 K for 1, 233 K for 2, and 187 K for 3, respectively, is likely correlated to the variable H···O and H···F interactions between the solvent molecules, anions, and the bipyridine ligands of the [Fe2Co2] squares, suggesting the significant anion-dependent effect in such a system.
RESUMO
Polyoxometalates (POMs) are known for their photocatalytic hydrogen production activity, but their solubility and limited stability often restrict their practical applications. Herein, we designed and solvothermally synthesized two new Cu-H2bpz (3,3',5,5'-tetramethyl-4,4'-bipyrazole, abbreviated as H2bpz) compounds, namely, Cu0.5(H2bpz)(NO3) (1) and Cu(Hbpz)(Cl)·DMF (2), and three new polyoxometalate-based Cu(II)-pyrazolate compounds, namely, Cu(PW12O40)0.5(H2bpz)2(H2O)·(OH)0.5(H2O)5.5 (3), Cu(HPMo12O40)(H2bpz)2(H2O)2·(H2O)4 (4), and Cu2(SiW12O40)(H2bpz)3(H2O)3·(H2O)6 (5). Compound 3 (Cu(PW12O40)0.5(H2bpz)2(H2O)·(OH)0.5(H2O)5.5) exhibits the best photocatalytic activity of 44.4 µ L h-1 g-1, which may be related to the stability of compounds. Herein, the solvothermal method has been proven to be an effective method in synthesizing stable organic-inorganic hybrid compounds with soluble POMs, metal ions, and organic ligands. Thus, heterogeneous catalysts with outstanding solar-light-driven photocatalytic properties were obtained.
RESUMO
Organic molecules with thermally activated delayed fluorescence (TADF) and aggregation induced emission (AIE) properties have attracted increasing research interest due to their great potential applications in organic light emitting diodes (OLEDs), especially for those with multicolor mechanochromic luminescence (MCL) features. Theoretical research on the luminescence characteristics of organic TADF emitters based on the aggregation states is highly desired to quantify the relationship between the TADF properties and aggregation states. In this work, we study the 4,4'-(6-(9,9-dimethylacridine-10(9H)-yl)quinoline-2,3-dibenzonitrile (DMAC-CNQ) emitter with TADF and AIE properties, and calculate the photophysical properties in gas, solid and amorphous states by using the quantum mechanics and molecular mechanics (QM/MM) method. Our simulations demonstrate that the aggregation states enhance obviously the reverse intersystem crossing rates and transition dipole moments of the DMAC-CNQ emitter, and suppress the non-radiative rates from the lowest excited singlet state (S1) to ground state (S0). Specifically, the molecular stacking of DMAC-CNQ in solid phases can mainly restrict the geometric torsion of the DMAC moiety for decreasing non-radiative decay rates, and the torsion of the CNQ moiety for increasing the reverse intersystem crossing rates. As a result, the calculated fluorescence efficiencies of the DMAC-CNQ emitter in the crystal and amorphous states are 67% and 26% respectively, and in good agreement with the experimental results.
RESUMO
Perfluorooctanoic acid (PFOA), its salts, and related compounds were listed as new persistent organic pollutants by the Stockholm Convention in 2019. In this study, the occurrence of residues of PFOA and other per- and polyfluoroalkyl substances (PFASs) in raw materials and fluoropolymer products from the Chinese fluoropolymer industries are reported for the first time. The PFOA concentrations in raw materials and fluoropolymer products were in the range of 6.7 to 1.1 × 106 ng/g, and Assuntos
Fluorocarbonos
, Poluentes Químicos da Água
, China
, Monitoramento Ambiental
, Fluorocarbonos/análise
, Polietileno
, Poluentes Químicos da Água/análise
RESUMO
Single-molecule functional materials with luminescence tunable by external stimuli are of increasing interest due to their application in sensors, display devices, biomarkers, and switches. Herein, new europium and samarium complexes with ligands having triphenylamine (TPA) groups as the redox center and 2,2'-bipyridine (bpy) as the coordinating groups and diketonate (tta) as the second ligand have been constructed. The complexes show white-light emission in selected solvents for proper mixtures of the emission from Ln3+ ions and the ligands. Meanwhile, they exhibit reversible luminescence switching on/off properties by controlling the external potential owing to intramolecular energy transfer from the Ln3+ ions to the electrochemically generated radical cation of TPAâ¢+. Time-dependent density functional theory (TD-DFT) calculations have been performed to study the electronic spectra. The proposed intramolecular energy transfer processes have been verified by density functional theory (DFT) studies.
RESUMO
Metal-free ultralong organic phosphorescence (UOP) materials have attracted significant attention owing to their anomalous photophysical properties and potential applications in various fields. Here, three pyrimidine-based organic luminogens, 9-(pyrimidin-2-yl)-9H-carbazole, 9-(4,6-dimethylpyrimidin-2-yl)-9H-carbazole, and 9-(5-bromopyrimidin-2-yl)-9H-carbazole are designed and synthesized, which show efficient yellow UOP with the longest lifetimes up to 1.37 s and the highest absolute phosphorescence quantum yields up to 23.6% under ambient conditions. Theoretical calculations, crystal structures, and photophysical properties of these compounds reveal that intramolecular hydrogen bonding, intermolecular π-π interactions, and intermolecular electronic coupling are responsible for forming dimers and generating highly efficient UOP. Their efficacy as solid materials for data encryption is demonstrated.
RESUMO
Room-temperature phosphorescence (RTP) was realized for the first time in a polyoxometalate-based charge-transfer (CT) hybrid material bearing polyoxometalates (POMs) as electron-donors (D) and rigid naphthalene diimides (NDIs) as electron-acceptors (A), meanwhile, this hybrid material displayed photochromism as well. The significant D-A anion-π interaction induced an additional through-space charge-transfer pathway. The resulting suitable D-A CT states can efficiently bridge the relatively large energy gap between the NDI-localized 1 π-π* and 3 π-π* states and thus trigger the ligand-localized phosphorescence (3 π-π*).
RESUMO
Multiscale modeling has become a popular tool for research applying to different areas including materials science, microelectronics, biology, chemistry, etc. In this tutorial review, we describe a newly developed multiscale computational method, incorporating quantum mechanics into electronic device modeling with the electromagnetic environment included through classical electrodynamics. In the quantum mechanics/electromagnetics (QM/EM) method, the regions of the system where active electron scattering processes take place are treated quantum mechanically, while the surroundings are described by Maxwell's equations and a semiclassical drift-diffusion model. The QM model and the EM model are solved, respectively, in different regions of the system in a self-consistent manner. Potential distributions and current densities at the interface between QM and EM regions are employed as the boundary conditions for the quantum mechanical and electromagnetic simulations, respectively. The method is illustrated in the simulation of several realistic systems. In the case of junctionless field-effect transistors, transfer characteristics are obtained and a good agreement between experiments and simulations is achieved. Optical properties of a tandem photovoltaic cell are studied and the simulations demonstrate that multiple QM regions are coupled through the classical EM model. Finally, the study of a carbon nanotube-based molecular device shows the accuracy and efficiency of the QM/EM method.
RESUMO
Histone deacetylases (HDACs) are a group of enzymes that deacetylate ε-N-acetyl lysine residues of histone and non-histone proteins and play an important role in gene regulation. HDAC4, a class-IIa HDAC, has been reported to shuttle between nucleus and cytoplasm in response to various cellular stimuli. The nucleo-cytoplasmic shuttling of HDAC4 is critical, and an anomalous nuclear localization might affect the cellular differentiation program. While the subcellular localization of HDAC4 has been reported to be vital for myoblast differentiation and chondrocyte hypertrophy, nuclear accumulation of HDAC4 during Runx2-induced osteoblast differentiation of stem cells has not been characterized. Ratjadone C is a natural compound that inhibits the nuclear export of proteins. Here, we show that Runx2 is a more potent transcription factor than Osterix in inducing osteoblast differentiation. Under the influence of ratjadone C, HDAC4 is retained in the nucleus and co-localizes with Runx2. However, forced nuclear accumulation of HDAC4 by ratjadone C or overexpression of the nuclear resident form of HDAC4 does not inhibit osteoblast differentiation, suggesting that the Runx2- induced osteogenic program of C3H10T1/2 cells is not affected by HDAC4. Even though phosphorylation of HDAC4 affects its compartmentalization and the stemness of progenitor cells, we found that total HDAC4 and phosphorylated HDAC4 remain cytoplasmic under both osteogenic and nonosteogenic conditions. Collectively, this work demonstrates that, regardless of the nucleo-cytoplasmic presence of HDAC4, the Runx2-induced osteoblast differentiation program of C3H10T1/2 cells remains unaffected. Additionally, the ratjadone C-mediated nuclear retention assay can potentially be used as a screening tool to identify novel regulatory mechanisms of HDAC4 and its functional partners in various pathophysiological conditions.