RESUMO
Colloidal metal nanoparticles dispersions are commonly used to create functional printed electronic devices and they typically require time-, energy- and equipment-consuming post-treatments to improve their electrical and mechanical properties. Traditional methods, e.g. thermal, UV/IR, and microwave treatments, limit the substrate options and may require expensive equipment, not available in all the laboratories. Moreover, these processes also cause the collapse of the film (nano)pores and interstices, limiting or impeding its nanostructuration. Finding a simple approach to obtain complex nanostructured materials with minimal post-treatments remains a challenge. In this study, a new sintering method for gold nanoparticle inks that called as "click sintering" has been reported. The method uses a catalytic reaction to enhance and tune the nanostructuration of the film while sintering the metallic nanoparticles, without requiring any cumbersome post-treatment. This results in a conductive and electroactive nanoporous thin film, whose properties can be tuned by the conditions of the reaction, i.e., concentration of the reagent and time. Therefore, this study presents a novel and innovative one-step approach to simultaneously sinter gold nanoparticles films and create functional nanostructures, directly and easily, introducing a new concept of real-time treatment with possible applications in the fields of flexible electronics, biosensing, energy, and catalysis.
RESUMO
Lateral flow assays (LFAs) are currently the most used point-of-care sensors for both diagnostic (e.g., pregnancy test, COVID-19 monitoring) and environmental (e.g., pesticides and bacterial monitoring) applications. Although the core of LFA technology was developed several decades ago, in recent years the integration of novel nanomaterials as signal transducers or receptor immobilization platforms has brought improved analytical capabilities. In this Review, we present how nanomaterial-based LFAs can address the inherent challenges of point-of-care (PoC) diagnostics such as sensitivity enhancement, lowering of detection limits, multiplexing, and quantification of analytes in complex samples. Specifically, we highlight the strategies that can synergistically solve the limitations of current LFAs and that have proven commercial feasibility. Finally, we discuss the barriers toward commercialization and the next generation of LFAs.
Assuntos
COVID-19 , Nanopartículas Metálicas , Nanoestruturas , Praguicidas , Bioensaio , COVID-19/diagnóstico , Humanos , Sistemas Automatizados de Assistência Junto ao LeitoRESUMO
Nanoscale electrodes have been a topic of intense research for many decades. Their enhanced sensitivities, born out of an improved signal-to-noise ratio as electrode dimensions decrease, make them ideal for the development of low-concentration analyte sensors. However, to date, nanoelectrode fabrication has typically required expensive equipment and exhaustive, time-consuming fabrication methods that have rendered them unsuitable for widespread use and commercialization. Herein, a method of nanoband electrode fabrication using low cost materials and equipment commonly found in research laboratories around the world is reported. The materials' cost to produce each nanoband is less than 0.01 and fabrication of a batch takes less than 1 h. The devices can be made of flexible plastics and their designs can be quickly and easily iterated. Facile methods of combining these nanobands into powerful devices, such as complete three-electrode systems, are also displayed. As a proof of concept, the electrodes are functionalized for the detection of a DNA sequence specific to SARS-CoV-2 and found to display single molecule sensitivity.
RESUMO
Signal amplification strategies are widely used for improving the sensitivity of lateral flow immunoassays (LFiAs). Herein, the artificial miniaturized peroxidase Fe(III)-MimochromeVI*a (FeMC6*a), immobilized on gold nanoparticles (AuNPs), is used as a strategy to obtain catalytic signal amplification in sandwich immunoassays on lateral flow strips. The assay scheme uses AuNPs decorated with the mini-peroxidase FeMC6*a and anti-human-IgG as a detection antibody (dAb), for the detection of human-IgG, as a model analyte. Recognition of the analyte by the capture and detection antibodies is first evidenced by the appearance of a red color in the test line (TL), due to the accumulation of AuNPs. Subsequent addition of 3,3',5,5'-tetramethylbenzidine (TMB) induces an increase of the test line color, due to the TMB being converted into an insoluble colored product, catalyzed by FeMC6*a. This work shows that FeMC6*a acts as an efficient catalyst in paper, increasing the sensitivity of an LFiA up to four times with respect to a conventional LFiA. Furthermore, FeMC6*a achieves lower limits of detection that are found in control experiments where it is replaced with horseradish peroxidase (HRP), its natural counterpart. This study represents a significant proof-of-concept for the development of more sensitive LFiAs, for different analytes, based on properly designed artificial metalloenzymes.
Assuntos
Nanopartículas Metálicas , Peroxidase , Humanos , Ouro , Compostos Férricos , Imunoensaio/métodos , Peroxidase do Rábano Silvestre , Imunoglobulina G , Limite de DetecçãoRESUMO
The quantitative detection of different molecular targets is of utmost importance for a variety of human activities, ranging from healthcare to environmental studies. Bioanalytical methods have been developed to solve this and to achieve the quantification of multiple targets from small volume samples. Generally, they can be divided into two different classes: point of care (PoC) and laboratory-based approaches. The former is rapid, low-cost, and user-friendly; however, the majority of the tests are semiquantitative, lacking in specificity and sensitivity. On the contrary, laboratory-based approaches provide high sensitivity and specificity, but the bulkiness of experimental instruments and complicated protocols hamper their use in resource-limited settings. In response, here we propose a smartphone-based device able to support laboratory-based optical techniques directly at the point of care. Specifically, we designed and fabricated a portable microplate reader that supports colorimetric, fluorescence, luminescence, and turbidity analyses. To demonstrate the potential of the device, we characterized its analytical performance by detecting a variety of relevant molecular targets (ranging from antibodies, toxins, drugs, and classic fluorophore dyes) and we showed how the estimated results are comparable to those obtained from a commercial microplate reader. Thanks to its low cost (<$300), portability (27 cm [length] × 18 cm [width] × 7 cm [height]), commercially available components, and open-source-based system, we believe it represents a valid approach to bring high-precision laboratory-based analysis at the point of care.
Assuntos
Colorimetria , Smartphone , Colorimetria/métodos , Corantes Fluorescentes , Humanos , Sistemas Automatizados de Assistência Junto ao LeitoRESUMO
Access to clean water for drinking, sanitation, and irrigation is a major sustainable development goal of the United Nations. Thus, technologies for cleaning water and quality-monitoring must become widely accessible and of low-cost, while being effective, selective, sustainable, and eco-friendly. To meet this challenge, hetero-bifunctional nanographene fluorescent beacons with high-affinity pockets for heavy metals are developed, offering top-rated and selective adsorption for cadmium and lead, reaching 870 and 450 mg g-1 , respectively. The heterobifunctional and multidentate pockets also operate as selective gates for fluorescence signal regulation with sub-nanomolar sensitivity (0.1 and 0.2 nm for Pb2+ and Cd2+ , respectively), due to binding affinities as low as those of antigen-antibody interactions. Importantly, the acid-proof nanographenes can be fully regenerated and reused. Their broad visible-light absorption offers an additional mode for water-quality monitoring based on ultra-low cost and user-friendly reagentless paper detection with the naked-eye at a limit of detection of 1 and 10 ppb for Pb2+ and Cd2+ ions, respectively. This work shows that photoactive nanomaterials, densely-functionalized with strong, yet selective ligands for targeted contaminants, can successfully combine features such as excellent adsorption, reusability, and sensing capabilities, in a way to extend the material's applicability, its life-cycle, and value-for-money.
Assuntos
Grafite , Metais Pesados , Adsorção , Cádmio , Descontaminação , Chumbo , ÁguaRESUMO
Metabolomics refers to the large-scale detection, quantification, and analysis of small molecules (metabolites) in biological media. Although metabolomics, alone or combined with other omics data, has already demonstrated its relevance for patient stratification in the frame of research projects and clinical studies, much remains to be done to move this approach to the clinical practice. This is especially true in the perspective of being applied to personalized/precision medicine, which aims at stratifying patients according to their risk of developing diseases, and tailoring medical treatments of patients according to individual characteristics in order to improve their efficacy and limit their toxicity. In this review article, we discuss the main challenges linked to analytical chemistry that need to be addressed to foster the implementation of metabolomics in the clinics and the use of the data produced by this approach in personalized medicine. First of all, there are already well-known issues related to untargeted metabolomics workflows at the levels of data production (lack of standardization), metabolite identification (small proportion of annotated features and identified metabolites), and data processing (from automatic detection of features to multi-omic data integration) that hamper the inter-operability and reusability of metabolomics data. Furthermore, the outputs of metabolomics workflows are complex molecular signatures of few tens of metabolites, often with small abundance variations, and obtained with expensive laboratory equipment. It is thus necessary to simplify these molecular signatures so that they can be produced and used in the field. This last point, which is still poorly addressed by the metabolomics community, may be crucial in a near future with the increased availability of molecular signatures of medical relevance and the increased societal demand for participatory medicine.
Assuntos
Metabolômica/métodos , Testes Imediatos , Medicina de Precisão , Biomarcadores/metabolismo , Química Analítica , HumanosRESUMO
Detecting the ultra-low abundance of analytes in real-life samples, such as biological fluids, water, soil, and food, requires the design and development of high-performance biosensing modalities. The breakthrough efforts from the scientific community have led to the realization of sensing technologies that measure the analyte's ultra-trace level, with relevant sensitivity, selectivity, response time, and sampling efficiency, referred to as Attomolar Analyte Sensing Techniques (AttoSens) in this review. In an AttoSens platform, 1 aM detection corresponds to the quantification of 60 target analyte molecules in 100 µL of sample volume. Herein, we review the approaches listed for various sensor probe design, and their sensing strategies that paved the way for the detection of attomolar (aM: 10-18 M) concentration of analytes. A summary of the technological advances made by the diverse AttoSens trends from the past decade is presented.
Assuntos
Técnicas Biossensoriais , NanotecnologiaRESUMO
Smart monitoring has been studied and developed in recent years to create faster, cheaper, and more user-friendly on-site methods. The present study describes an innovative technology for investigative monitoring of heavy metal pollution (Cu and Pb) in surface water. It is composed of an autonomous surface vehicle capable of semiautonomous driving and equipped with a microfluidic device for detection of heavy metals. Detection is based on the method of square wave anodic stripping voltammetry using carbon-based screen-printed electrodes (SPEs). The focus of this work was to validate the ability of the integrated system to perform on-site detection of heavy metal pollution plumes in river catchments. This scenario was simulated in laboratory experiments. The main performance characteristics of the system, which was evaluated based on ISO 15839 were measurement bias (Pb 75%, Cu 65%), reproducibility (in terms of relative standard deviation: Pb 11-18%, Cu 6-10%) and the limit of detection (4 µg/L for Pb and 7 µg/L for Cu). The lowest detectable change (LDC), which is an important performance characteristic for this application, was estimated to be 4-5 µg/L for Pb and 6-7 µg/L for Cu. The life span of an SPE averaged 39 measurements per day, which is considered sufficient for intended monitoring campaigns. This work demonstrated the suitability of the integrated system for on-site detection of Pb and Cu emissions from large and medium urban areas discharging into small water bodies.
Assuntos
Metais Pesados , Procedimentos Cirúrgicos Robóticos , Monitoramento Ambiental , Metais Pesados/análise , Reprodutibilidade dos Testes , ÁguaRESUMO
Point-of-care (PoC) tests are practical and effective diagnostic solutions for major clinical problems, ranging from the monitoring of a pandemic to recurrent or simple measurements. Although, in recent years, a great improvement in the analytical performance of such sensors has been observed, there is still a major issue that has not been properly solved: the ability to perform adequate sample treatments. The main reason is that normally sample treatments require complicated or long procedures not adequate for deployment at the PoC. In response, a sensing platform, called paper-based electrophoretic bioassay (PEB), that combines the key characteristics of a lateral flow assay (LFA) with the sample treatment capabilities of electrophoresis is developed. In particular, the ability of PEB to separate different types of particles and to detect human antibodies in untreated spiked whole blood is demonstrated. Finally, to make the platform suitable for PoC, PEB is coupled with a smartphone that controls the electrophoresis and reads the optical signal generated. It is believed that the PEB platform represents a much-needed solution for the detection of low target concentrations in complex media, solving one of the major limitations of LFA and opening opportunities for point-of-care sensors.
Assuntos
Técnicas Biossensoriais , Smartphone , Bioensaio , Humanos , Sistemas Automatizados de Assistência Junto ao Leito , Testes ImediatosRESUMO
Significant levels of infectious diseases caused by pathogenic bacteria are nowadays a worldwide matter, carrying considerable public health care challenges and huge economic concerns. Because of the rapid transmission of these biothreat agents and the outbreak of diseases, a rapid detection of pathogens in early stages is crucial, particularly in low-resources settings. To this aim, we developed for the first time a new sensing approach carried out in a single step for Escherichia coli O157:H7 detection. The detection principle is based on Förster resonance energy transfer using gold nanoclusters as a signal reporter and gold nanoparticles conjugated with antibodies as a quencher. The sensing platform includes an ultraviolet-light-emitting diode to provide the proper excitation and consists of a microtube containing two pieces of fiber glass; one of them is embedded with label-free gold nanoclusters and the other one with gold nanoparticles conjugated with antibodies. Upon the addition of the sample containing bacteria, the florescence of gold nanoclusters is recovered. The assay was evaluated by the naked eye (on/off) and quantitatively with use of a smartphone camera. The biosensor proved to be highly specific and sensitive, achieving a limit of detection as low as 4.0 cfu mL-1. Additionally, recoveries of 110% and 95% were obtained when the platforms in spiked river and tap water, respectively, were evaluated.
Assuntos
Técnicas Biossensoriais , Escherichia coli O157/isolamento & purificação , Sistemas Automatizados de Assistência Junto ao Leito , Ouro/química , Humanos , Nanopartículas Metálicas/químicaRESUMO
The development of paper-based electroanalytical strips as powerful diagnostic tools has gained a lot of attention within the sensor community. In particular, the detection of nucleic acids in complex matrices represents a trending topic, especially when focused toward the development of emerging technologies, such as liquid biopsy. DNA-based biosensors have been largely applied in this direction, and currently, there are two main approaches based on target/probe hybridization reported in the literature, namely Signal ON and Signal OFF. In this technical note, the two approaches are evaluated in combination with paper-based electrodes, using a single strand DNA relative to H1047R (A3140G) missense mutation in exon 20 in breast cancer as the model target. A detailed comparison among the analytical performances, detection protocol, and cost associated with the two systems is provided, highlighting the advantages and drawbacks depending on the application. The present work is aimed to a wide audience, particularly for those in the field of point-of-care, and it is intended to provide the know-how to manage with the design and development stages, and to optimize the platform for the sensing of nucleic acids using a paper-based detection method.
Assuntos
Técnicas Biossensoriais , Neoplasias da Mama/genética , Técnicas Eletroquímicas , Papel , DNA de Cadeia Simples/análise , DNA de Cadeia Simples/genética , Feminino , Humanos , MutaçãoRESUMO
Solid-phase isothermal recombinase polymerase amplification (RPA) offers many benefits over the standard RPA in homogeneous phase in terms of sensitivity, portability, and versatility. However, RPA devices reported to date are limited by the need for heating sources to reach sensitive detection. With the aim of overcoming such limitation, we propose here a label-free highly integrated in situ RPA amplification/detection approach at room temperature that takes advantage of the high sensitivity offered by gold nanoparticle (AuNP)-modified sensing substrates and electrochemical impedance spectroscopic (EIS) detection. Plant disease ( Citrus tristeza virus (CTV)) diagnostics was selected as a relevant target for demonstration of the proof-of-concept. RPA assay for amplification of the P20 gene (387-bp) characteristic of CTV was first designed/optimized and tested by standard gel electrophoresis analysis. The optimized RPA conditions were then transferred to the AuNP-modified electrode surface, previously modified with a thiolated forward primer. The in situ-amplified CTV target was investigated by EIS in a Fe(CN6)4-/Fe(CN6)3- red-ox system, being able to quantitatively detect 1000 fg µL-1 of nucleic acid. High selectivity against nonspecific gene sequences characteristic of potential interfering species such as Citrus psorosis virus (CPsV) and Citrus caxicia viroid (CCaV) was demonstrated. Good reproducibility (RSD of 8%) and long-term stability (up to 3 weeks) of the system were also obtained. Overall, with regard to sensitivity, cost, and portability, our approach exhibits better performance than RPA in homogeneous phase, also without the need of heating sources required in other solid-phase approaches.
Assuntos
Closterovirus/genética , DNA Bacteriano/genética , Técnicas de Amplificação de Ácido Nucleico , Vírus de Plantas/genética , Reação em Cadeia da Polimerase , Viroides/genética , Ouro/química , Nanopartículas Metálicas/química , Técnicas de Síntese em Fase Sólida , TemperaturaRESUMO
Finding fast and reliable ways to detect pathogenic bacteria is crucial for addressing serious public health issues in clinical, environmental, and food settings. Here, we present a novel assay based on the conversion of an electrochemical signal into a more convenient optical readout for the visual detection of Escherichia coli. Electropolymerizing polyaniline (PANI) on an indium tin oxide screen-printed electrode (ITO SPE), we achieved not only the desired electrochromic behavior but also a convenient way to modify the electrode surface with antibodies (taking advantage of the many amine groups of PANI). Applying a constant potential to the PANI-modified ITO SPE induces a change in their oxidation state, which in turn generates a color change on the electrode surface. The presence of E. coli on the electrode surface increases the resistance in the circuit affecting the PANI oxidation states, producing a different electrochromic response. Using this electrochromic sensor, we could measure concentrations of E. coli spanning 4 orders of magnitude with a limit of detection of 102 colony forming unit per 1 mL (CFU mL-1) by the naked eye and 101 CFU mL-1 using ImageJ software. In this work we show that merging the sensitivity of electrochemistry with the user-friendliness of an optical readout can generate a new and powerful class of biosensors, with potentially unlimited applications in a variety of fields.
Assuntos
Compostos de Anilina/química , Colorimetria/métodos , Eletroquímica/métodos , Escherichia coli/isolamento & purificação , Colorimetria/normas , Eletrodos , Limite de Detecção , Oxirredução , Polimerização , Software , Compostos de EstanhoRESUMO
The authors describe a test stripe for fluorometric determination of the endocrine disruptor bisphenol A (BPA). Graphene quantum dots (GQDs) were immobilized on molecularly imprinted nanoparticles which then were placed on nitrocellulose paper. The GQDs display blue fluorescence (with excitation/emission peaks at 350/440 nm) which is reduced in the presence of BPA. The test stripe has a 43.9 ± 0.8 µg·L-1 limit of detection in case of water samples. The stripe was applied to the determination of BPA in (spiked) tap water and sea water, and the LODs were found to be 1.8 ± 0.2 µg·L-1 and 4.2 ± 0.5 µg·L-1, respectively. Structural analogs of BPA, such as aminophenol, phenol, hydroquinone and naphthol were found not to interfere. Graphical abstract Schematic presentation of graphene quantum dots immobilized on molecularly imprinted nanoparticles placed on nitrocellulose paper for the determination of Bisphenol A in tap water and seawater. The method is based on the fluorescence quenching due to binding of targets in specific recognition sites.
RESUMO
In this review, we have discussed the capabilities of nanomaterials for point-of-care (PoC) diagnostics and explained how these materials can help to strengthen, miniaturize and improve the quality of diagnostic devices. Since the optical, electrochemical and other physical properties of nanomaterials are dictated by their composition, size and shape, these factors are critical in the design and function of nanomaterial-based PoC diagnostics.
Assuntos
Nanomedicina/instrumentação , Nanoestruturas/química , Sistemas Automatizados de Assistência Junto ao Leito , HumanosRESUMO
Electrochromic effect and molecularly imprinted technology have been used to develop a sensitive and selective electrochromic sensor. The polymeric matrices obtained using the imprinting technology are robust molecular recognition elements and have the potential to mimic natural recognition entities with very high selectivity. The electrochromic behavior of iridium oxide nanoparticles (IrOx NPs) as physicochemical transducer together with a molecularly imprinted polymer (MIP) as recognition layer resulted in a fast and efficient translation of the detection event. The sensor was fabricated using screen-printing technology with indium tin oxide as a transparent working electrode; IrOx NPs where electrodeposited onto the electrode followed by thermal polymerization of polypyrrole in the presence of the analyte (chlorpyrifos). Two different approaches were used to detect and quantify the pesticide: direct visual detection and smartphone imaging. Application of different oxidation potentials for 10 s resulted in color changes directly related to the concentration of the analyte. For smartphone imaging, at fixed potential, the concentration of the analyte was dependent on the color intensity of the electrode. The electrochromic sensor detects a highly toxic compound (chlorpyrifos) with a 100 fM and 1 mM dynamic range. So far, to the best of our knowledge, this is the first work where an electrochromic MIP sensor uses the electrochromic properties of IrOx to detect a certain analyte with high selectivity and sensitivity.
RESUMO
A graphene oxide rolled-up tube production process is reported using wax-printed membranes for the fabrication of on-demand engineered micromotors at different levels of oxidation, thickness, and lateral dimensions. The resultant graphene oxide rolled-up tubes can show magnetic and catalytic movement within the addition of magnetic nanoparticles or sputtered platinum in the surface of graphene-oxide-modified wax-printed membranes prior to the scrolling process. As a proof of concept, the as-prepared catalytic graphene oxide rolled-up micromotors are successfully exploited for oil removal from water. This micromotor production technology relies on an easy, operator-friendly, fast, and cost-efficient wax-printed paper-based method and may offer a myriad of hybrid devices and applications.