Low-voltage organic field effect transistors with a 2-tridecyl[1]benzothieno[3,2-b][1]benzothiophene semiconductor layer.

An asymmetric n-alkyl substitution pattern was realized in 2-tridecyl[1]benzothieno[3,2-b][1]benzothiophene (C(13)-BTBT) in order to improve the charge transport properties in organic thin-film transistors. We obtained large hole mobilities up to 17.2 cm(2)/(V·s) in low-voltage operating devices. The large mobility is related to densely packed layers of the BTBT π-systems at the channel interface dedicated to the substitution motif and confirmed by X-ray reflectivity measurements. The devices exhibit promising stability in continuous operation for several hours in ambient air.

The relationship between threshold voltage and dipolar character of self-assembled monolayers in organic thin-film transistors.

We report a quantitative study that describes and correlates the threshold voltage of low-voltage organic field-effect transistors with the molecular structure of self-assembled monolayer dielectrics. We have observed that the component of the dipole moment of such self-assembled molecules perpendicular to the surface correlates linearly with the threshold voltage shift in devices. The model was validated using three different organic semiconductors (pentacene, α,α'-dihexylsexithiophene, and fullerene-C(60)) on six different self-assembled monolayers. The correlation found can help optimize future devices, by tuning the dipole moments of the molecules that constitute the self-assembled monolayer.

Low-voltage p- and n-type organic self-assembled monolayer field effect transistors.

We report on p- and n-type organic self-assembled monolayer field effect transistors. On the base of quaterthiophene and fullerene units, multifunctional molecules were synthesized, which have the ability to self-assemble and provide multifunctional monolayers. The self-assembly approach, based on phosphonic acids, is very robust and allows the fabrication of functional devices even on larger areas. The p- and n-type transistor devices with only one molecular active layer were demonstrated for transistor channel lengths up to 10 µm. The monolayer composition is proven by electrical experiments and by high-resolution transmission electron microscopy, electron energy loss spectroscopy, XPS, and AFM experiments. Because of the molecular design and the contribution of isolating alkyl chains to the hybrid dielectric, our devices operate at low supply voltages (-4 V to +4 V), which is a key requirement for practical use and simplifies the integration in standard applications. The monolayer devices operate in ambient air and show hole and electron mobilities of 10(-5) cm(2)/(V s) and 10(-4) cm(2)/(V s) respectively. In particular the n-type operation of self-assembled monolayer transistors has not been reported before. Hereby, structure-property relations of the SAMs have been studied. Furthermore an approach to protect the sensitive C(60) from immediate degradation within the molecular design is provided.

Interface engineering in high-performance low-voltage organic thin-film transistors based on 2,7-dialkyl-[1]benzothieno[3,2-b][1]benzothiophenes.

We investigated two different (2,7-dialkyl-[1]benzothieno[3,2-b][1]benzothiophenes; C(n)-BTBT-C(n), where n = 12 or 13) semiconductors in low-voltage operating thin-film transistors. By choosing functional molecules in nanoscaled hybrid dielectric layers, we were able to tune the surface energy and improve device characteristics, such as leakage current and hysteresis. The dipolar nature of the self-assembled molecules led to a shift in the threshold voltage. All devices exhibited high charge carrier mobilities of 0.6-7.0 cm(2) V(-1) s(-1). The thin-film morphology of BTBT was studied by means of atomic force microscopy (AFM), presented a dependency upon the surface energy of the self-assembled monolayer (SAM) hybrid dielectrics but not upon the device performance. The use of C(13)-BTBT-C(13) on hybrid dielectrics of AlO(x) and a F(15)C(18)-phosphonic acid monolayer led to devices with a hole mobility of 1.9 cm(2) V(-1) s(-1) at 3 V, on/off ratio of 10(5), small device-device variation of mobility, and a threshold voltage of only -0.9 V, thus providing excellent characteristics for further integration.

Low-voltage self-assembled monolayer field-effect transistors on flexible substrates.

Self-assembled monolayer field-effect transistors (SAMFETs) of BTBT functionalized phosphonic acids are fabricated. The molecular design enables device operation with charge carrier mobilities up to 10(-2) cm(2) V(-1) s(-1) and for the first time SAMFETs which operate on rough, flexible PEN substrates even under mechanical substrate bending.

Ultrabright supramolecular beacons based on the self-assembly of two-photon chromophores on metal nanoparticles.

Silver nanoparticles coated with a self-assembled layer of approximately 2500 chromophoric alkylthiol ligands, that exhibit a huge per particle two-photon absorption cross section (2.7 x 10-45 cm4 s photon-1) and a high fluorescence quantum yield (0.33), are reported. Polyfunctionalized variants of these nanoparticles have been produced that show reasonable solubility in water/ethanol mixtures. By virtue of the large number of tethered chromophores, these particles act as strongly two-photon absorbing nanobeacons and may have applications in fluorescence imaging and sensing.