Investigation on lysosomal accumulation by a quantitative analysis of 2D phase-maps in digital holography microscopy.

Lysosomes are the terminal end of catabolic pathways in the cell, as well as signaling centers performing important functions such as the recycling of macromolecules, organelles, and nutrient adaptation. The importance of lysosomes in human health is supported by the fact that the deficiency of most lysosomal genes causes monogenic diseases called as a group Lysosomal Storage Diseases (LSDs). A common phenotypic hallmark of LSDs is the expansion of the lysosomal compartment that can be detected by using conventional imaging methods based on immunofluorescence protocols or overexpression of tagged lysosomal proteins. These methods require the alteration of the cellular architecture (i.e., due to fixation methods), can alter the behavior of cells (i.e., by the overexpression of proteins), and require sample preparation and the accurate selection of compatible fluorescent markers in relation to the type of analysis, therefore limiting the possibility of characterizing cellular status with simplicity. Therefore, a quantitative and label-free methodology, such as Quantitative Phase Imaging through Digital Holographic (QPI-DH), for the microscopic imaging of lysosomes in health and disease conditions may represent an important advance to study and effectively diagnose the presence of lysosomal storage in human disease. Here we proof the effectiveness of the QPI-DH method in accomplishing the detection of the lysosomal compartment using mouse embryonic fibroblasts (MEFs) derived from a Mucopolysaccharidosis type III-A (MSP-IIIA) mouse model, and comparing them with wild-type (WT) MEFs. We found that it is possible to identify label-free biomarkers able to supply a first pre-screening of the two populations, thus showing that QPI-DH can be a suitable candidate to surpass fluorescent drawbacks in the detection of lysosomes dysfunction. An appropriate numerical procedure was developed for detecting and evaluate such cellular substructures from in vitro cells cultures. Results reported in this study are encouraging about the further development of the proposed QPI-DH approach for such type of investigations about LSDs.

On monocytes and lymphocytes biolens clustering by in flow holographic microscopy.

Live cells act as biological lenses and can be employed as real-world optical components in bio-hybrid systems. Imaging at nanoscale, optical tweezers, lithography and also photonic waveguiding are some of the already proven functionalities, boosted by the advantage that cells are fully biocompatible for intra-body applications. So far, various cell types have been studied for this purpose, such as red blood cells, bacterial cells, stem cells and yeast cells. White Blood Cells (WBCs) play a very important role in the regulation of the human body activities and are usually monitored for assessing its health. WBCs can be considered bio-lenses but, to the best of our knowledge, characterization of their optical properties have not been investigated yet. Here, we report for the first time an accurate study of two model classes of WBCs (i.e., monocytes and lymphocytes) by means of a digital holographic microscope coupled with a microfluidic system, assuming WBCs bio-lens characteristics. Thus, quantitative phase maps for many WBCs have been retrieved in flow-cytometry (FC) by achieving a significant statistical analysis to prove the enhancement in differentiation among sphere-like bio-lenses according to their sizes (i.e., diameter d) exploiting intensity parameters of the modulated light in proximity of the cell optical axis. We show that the measure of the low intensity area (S: I z < I th z ) in a fixed plane, is a feasible parameter for cell clustering, while achieving robustness against experimental misalignments and allowing to adjust the measurement sensitivity in post-processing. 2D scatterplots of the identified parameters (d-S) show better differentiation respect to the 1D case. The results show that the optical focusing properties of WBCs allow the clustering of the two populations by means of a mere morphological analysis, thus leading to the new concept of cell-optical-fingerprint avoiding fluorescent dyes. This perspective can open new routes in biomedical sciences, such as the chance to find optical-biomarkers at single cell level for label-free diagnosis.

Digital holographic approaches to the detection and characterization of microplastics in water environments.

Microplastic (MP) pollution is seriously threatening the environmental health of the world, which has accelerated the development of new identification and characterization methods. Digital holography (DH) is one of the emerging tools to detect MPs in a high-throughput flow. Here, we review advances in MP screening by DH. We examine the problem from both the hardware and software viewpoints. Automatic analysis based on smart DH processing is reported by highlighting the role played by artificial intelligence for classification and regression tasks. In this framework, the continuous development and availability in recent years of field-portable holographic flow cytometers for water monitoring also is discussed.

Kinematic analysis and visualization of Tetraselmis microalgae 3D motility by digital holography.

A study on locomotion in a 3D environment of Tetraselmis microalgae by digital holographic microscopy is reported. In particular, a fast and semiautomatic criterion is revealed for tracking and analyzing the swimming path of a microalga (i.e., Tetraselmis species) in a 3D volume. Digital holography (DH) in a microscope off-axis configuration is exploited as a useful method to enable fast autofocusing and recognition of objects in the field of view, thus coupling DH with appropriate numerical algorithms. Through the proposed method we measure, simultaneously, the tri-dimensional paths followed by the flagellate microorganism and the full set of the kinematic parameters that describe the swimming behavior of the analyzed microorganisms by means of a polynomial fitting and segmentation. Furthermore, the method is capable to furnish the accurate morphology of the microorganisms at any instant of time along its 3D trajectory. This work launches a promising trend having as the main objective the combined use of DH and motility microorganism analysis as a label-free and non-invasive environmental monitoring tool, employable also for in situ measurements. Finally, we show that the locomotion can be visualized intriguingly by different modalities to furnish marine biologists with a clear 3D representation of all the parameters of the kinematic set in order to better understand the behavior of the microorganism under investigation.

Three-Dimensional Quantitative Intracellular Visualization of Graphene Oxide Nanoparticles by Tomographic Flow Cytometry.

Interaction of nanoparticles (NPs) with cells is of fundamental importance in biology and biomedical sciences. NPs can be taken up by cells, thus interacting with their intracellular elements, modifying the life cycle pathways, and possibly inducing death. Therefore, there is a great interest in understanding and visualizing the process of cellular uptake itself or even secondary effects, for example, toxicity. Nowadays, no method is reported yet in which 3D imaging of NPs distribution can be achieved for suspended cells in flow-cytometry. Here we show that, by means of label-free tomographic flow-cytometry, it is possible to obtain full 3D quantitative spatial distribution of nanographene oxide (nGO) inside each single flowing cell. This can allow the setting of a class of biomarkers that characterize the 3D spatial intracellular deployment of nGO or other NPs clusters, thus opening the route for quantitative descriptions to discover new insights in the realm of NP-cell interactions.

Rolling angle recovery of flowing cells in holographic tomography exploiting the phase similarity.

Holographic tomography allows the 3D mapping of the refractive index of biological samples thanks to reconstruction methods based on the knowledge of illumination directions or rotation angles of the imaged sample. Recently, phase contrast tomographic flow cytometry by digital holography has been demonstrated to reconstruct the three-dimensional refractive index distribution of single cells while they are flowing along microfluidic channels. In this system, the illumination direction is fixed while the sample's rotation is not deterministically known a priori but induced by hydrodynamic forces. We propose here a technique to retrieve the rolling angles, based on a new phase images similarity metric that is capable of identifying a cell's orientations from its 3D positioning while it is flowing along the microfluidic channel. The method is experimentally tested and also validated through appropriate numerical simulations. We provide demonstration of concept by achieving reconstruction of breast cancer cells tomography.

Label-Free Optical Marker for Red-Blood-Cell Phenotyping of Inherited Anemias.

The gold-standard methods for anemia diagnosis are complete blood counts and peripheral-smear observations. However, these do not allow for a complete differential diagnosis as that requires biochemical assays, which are label-dependent techniques. On the other hand, recent studies focus on label-free quantitative phase imaging (QPI) of blood samples to investigate blood diseases by using video-based morphological methods. However, when sick cells are very similar to healthy ones in terms of morphometric features, identification of a blood disease becomes challenging even with QPI. Here, we introduce a label-free optical marker (LOM) to detect red-blood-cell (RBC) phenotypes, demonstrating that a single set of all-optical parameters can clearly identify a signature directly related to an erythrocyte disease through modeling each RBC as a biological lens. We tested this novel biophotonic analysis by proving that several inherited anemias, such as iron-deficiency anemia, thalassemia, hereditary spherocytosis, and congenital dyserythropoietic anemia, can be identified and sorted, thus opening a novel route for blood diagnosis on a completely different concept based on LOMs.

Biolens behavior of RBCs under optically-induced mechanical stress.

In this work, the optical behavior of Red Blood Cells (RBCs) under an optically-induced mechanical stress was studied. Exploiting the new findings concerning the optical lens-like behavior of RBCs, the variations of the wavefront refracted by optically-deformed RBCs were further investigated. Experimental analysis have been performed through the combination of digital holography and numerical analysis based on Zernike polynomials, while the biological lens is deformed under the action of multiple dynamic optical tweezers. Detailed wavefront analysis provides comprehensive information about the aberrations induced by the applied mechanical stress. By this approach it was shown that the optical properties of RBCs in their discocyte form can be affected in a different way depending on the geometry of the deformation. In analogy to classical optical testing procedures, optical parameters can be correlated to a particular mechanical deformation. This could open new routes for analyzing cell elasticity by examining optical parameters instead of direct but with low resolution strain analysis, thanks to the high sensitivity of the interferometric tool. Future application of this approach could lead to early detection and diagnosis of blood diseases through a single-step wavefront analysis for evaluating different cells elasticity. © 2017 International Society for Advancement of Cytometry.

Improving holographic reconstruction by automatic Butterworth filtering for microelectromechanical systems characterization.

Digital holographic microscopy is an important interferometric tool in optical metrology allowing the investigation of engineered surfaces with microscale lateral resolution and nanoscale axial precision. In particular, microelectromechanical systems (MEMS) surface analysis, conducted by holographic characterization, requires high accuracy for functional testing. The main issues related to MEMS inspection are the superficial roughness and the complex geometry resulting from the several fabrication steps. Here, an automatic procedure, particularly suited in the case of high-roughness surfaces, is presented to selectively filter the spectrum, providing very low-noise reconstructed images. The numerical procedure is based on Butterworth filtering, and the obtained results demonstrate a significant increase in the images' quality and in the accuracy of the measurements, making our technique highly applicable for quantitative phase imaging in MEMS analysis. Furthermore, our method is fully tunable to the spectrum under investigation and automatic. This makes it highly suitable for real-time applications. Several experimental tests show the suitability of the proposed approach.

3D morphometry of red blood cells by digital holography.

Three dimensional (3D) morphometric analysis of flowing and not-adherent cells is an important aspect for diagnostic purposes. However, diagnostics tools need to be quantitative, label-free and, as much as possible, accurate. Recently, a simple holographic approach, based on shape from silhouette algorithm, has been demonstrated for accurate calculation of cells biovolume and displaying their 3D shapes. Such approach has been adopted in combination with holographic optical tweezers and successfully applied to cells with convex shape. Nevertheless, unfortunately, the method fails in case of specimen with concave surfaces. Here, we propose an effective approach to achieve correct 3D shape measurement that can be extended in case of cells having concave surfaces, thus overcoming the limit of the previous technique. We prove the new procedure for healthy red blood cells (RBCs) (i.e., discocytes) having a concave surface in their central region. Comparative analysis of experimental results with a theoretical 3D geometrical model of RBC is discussed in order to evaluate accuracy of the proposed approach. Finally, we show that the method can be also useful to classify, in terms of morphology, different varieties of RBCs.

Holographic tracking of living cells by three-dimensional reconstructed complex wavefronts alignment.

We propose here a new three-dimensional (3D) holographic tracking method capable to track, simultaneously and in a single step, all the spatial coordinates of micro-objects. The approach is based on the enhanced correlation coefficient (ECC) maximization method but applied, for the first time to the best of our knowledge, directly on the holographic reconstructed complex wave fields. The key novelty of the proposed strategy is its ability to calculate simultaneously the 3D coordinates of cells, without decoupling the contribution of amplitude and phase. The proposed strategy is tested on living cells (i.e., NIH 3T3 mouse fibroblast) flowing into a microfluidic channel and compared with classical holographic tracking approach. Theoretical description and experimental validation of the proposed strategy are reported.

Beyond fluorescence: advances in computational label-free full specificity in 3D quantitative phase microscopy.

Despite remarkable progresses in quantitative phase imaging (QPI) microscopes, their wide acceptance is limited due to the lack of specificity compared with the well-established fluorescence microscopy. In fact, the absence of fluorescent tag prevents to identify subcellular structures in single cells, making challenging the interpretation of label-free 2D and 3D phase-contrast data. Great effort has been made by many groups worldwide to address and overcome such limitation. Different computational methods have been proposed and many more are currently under investigation to achieve label-free microscopic imaging at single-cell level to recognize and quantify different subcellular compartments. This route promises to bridge the gap between QPI and FM for real-world applications.

Multi-scale fractal Fourier Ptychographic microscopy to assess the dose-dependent impact of copper pollution on living diatoms.

Accumulation of bioavailable heavy metals in aquatic environment poses a serious threat to marine communities and human health due to possible trophic transfers through the food chain of toxic, non-degradable, exogenous pollutants. Copper (Cu) is one of the most spread heavy metals in water, and can severely affect primary producers at high doses. Here we show a novel imaging test to assay the dose-dependent effects of Cu on live microalgae identifying stress conditions when they are still capable of sustaining a positive growth. The method relies on Fourier Ptychographic Microscopy (FPM), capable to image large field of view in label-free phase-contrast mode attaining submicron lateral resolution. We uniquely combine FPM with a new multi-scale analysis method based on fractal geometry. The system is able to provide ensemble measurements of thousands of diatoms in the liquid sample simultaneously, while ensuring at same time single-cell imaging and analysis for each diatom. Through new image descriptors, we demonstrate that fractal analysis is suitable for handling the complexity and informative power of such multiscale FPM modality. We successfully tested this new approach by measuring how different concentrations of Cu impact on Skeletonema pseudocostatum diatom populations isolated from the Sarno River mouth.

Drop-on-Demand Pyro-Electrohydrodynamic Printing of Nematic Liquid Crystal Microlenses.

Inkjet printing of liquid crystal (LC) microlens arrays is particularly appealing for the development of switchable 2D/3D organic light-emitting diode (OLED) displays, as the printing process ensures that the lenses can be deposited directly and on-demand onto the pixelated OLED layer without the need for additional steps, thus simplifying fabrication complexity. Even if different fabrication technologies have been employed and good results in LC direct printing have already been achieved, all the systems used require costly equipment and heated nozzles to reduce the LC solution's viscosity. Here, we present the direct printing of a nematic LC (NLC) lens by a Drop-on-Demand (DoD) inkjet printing by a pyro-electrohydrodynamic effect for the first time. The method works at ambient temperature and avoids dispensing nozzles, thus offering a noncontact manipulation approach of liquid with high resolution and good repeatability on different kinds of substrates. NLC microlenses are printed on different substrates and fully characterized. Polarization properties are evaluated for various samples, i.e., NLC lenses on unaligned and indium-tin oxide (ITO) aligned. Moreover, an in-depth characterization of the NLC lenses is reported by polarized optical microscopy and by analyzing the birefringence in digital holographic microscopy.

Enhanced tissue slide imaging in the complex domain via cross-explainable GAN for Fourier ptychographic microscopy.

Achieving microscopy with large space-bandwidth products plays a key role in diagnostic imaging and is widely significant in the overall field of clinical practice. Among quantitative microscopy techniques, Fourier Ptychography (FP) provides a wide field of view and high-resolution images, suitable to the histopathological field, but onerous in computational terms. Artificial intelligence can be a solution in this sense. In particular, this research delves into the application of Generative Adversarial Networks (GAN) for the dual-channel complex FP image enhancement of human kidney samples. The study underscores the GANs' efficacy in promoting biological architectures in FP domain, thereby still guaranteeing high resolution and visibility of detailed microscopic structures. We demonstrate successful GAN-based enhanced reconstruction through two strategies: cross-explainability and expert survey. The cross-explainability is evaluated through the comparison of explanation maps for both real and imaginary components underlining its robustness. This comparison further shows that their interplay is pivotal for accurate reconstruction without hallucinations. Secondly, the enhanced reconstruction accuracy and effectiveness in a clinical workflow are confirmed through a two-step survey conducted with nephrologists.

All-optical dual module platform for motility-based functional scrutiny of microencapsulated probiotic bacteria.

Probiotic bacteria are widely used in pharmaceutics to offer health benefits. Microencapsulation is used to deliver probiotics into the human body. Capsules in the stomach have to keep bacteria constrained until release occurs in the intestine. Once outside, bacteria must maintain enough motility to reach the intestine walls. Here, we develop a platform based on two label-free optical modules for rapidly screening and ranking probiotic candidates in the laboratory. Bio-speckle dynamics assay tests the microencapsulation effectiveness by simulating the gastrointestinal transit. Then, a digital holographic microscope 3D-tracks their motility profiles at a single element level to rank the strains.

Classifying breast cancer and fibroadenoma tissue biopsies from paraffined stain-free slides by fractal biomarkers in Fourier Ptychographic Microscopy.

Breast cancer is one of the most spread and monitored pathologies in high-income countries. After breast biopsy, histological tissue is stored in paraffin, sectioned and mounted. Conventional inspection of tissue slides under benchtop light microscopes involves paraffin removal and staining, typically with H&E. Then, expert pathologists are called to judge the stained slides. However, paraffin removal and staining are operator-dependent, time and resources consuming processes that can generate ambiguities due to non-uniform staining. Here we propose a novel method that can work directly on paraffined stain-free slides. We use Fourier Ptychography as a quantitative phase-contrast microscopy method, which allows accessing a very wide field of view (i.e., mm2) in one single image while guaranteeing high lateral resolution (i.e., 0.5 µm). This imaging method is multi-scale, since it enables looking at the big picture, i.e. the complex tissue structure and connections, with the possibility to zoom-in up to the single-cell level. To handle this informative image content, we introduce elements of fractal geometry as multi-scale analysis method. We show the effectiveness of fractal features in describing and classifying fibroadenoma and breast cancer tissue slides from ten patients with very high accuracy. We reach 94.0 ± 4.2% test accuracy in classifying single images. Above all, we show that combining the decisions of the single images, each patient's slide can be classified with no error. Besides, fractal geometry returns a guide map to help pathologist to judge the different tissue portions based on the likelihood these can be associated to a breast cancer or fibroadenoma biomarker. The proposed automatic method could significantly simplify the steps of tissue analysis and make it independent from the sample preparation, the skills of the lab operator and the pathologist.

Label-free cell classification in holographic flow cytometry through an unbiased learning strategy.

Nowadays, label-free imaging flow cytometry at the single-cell level is considered the stepforward lab-on-a-chip technology to address challenges in clinical diagnostics, biology, life sciences and healthcare. In this framework, digital holography in microscopy promises to be a powerful imaging modality thanks to its multi-refocusing and label-free quantitative phase imaging capabilities, along with the encoding of the highest information content within the imaged samples. Moreover, the recent achievements of new data analysis tools for cell classification based on deep/machine learning, combined with holographic imaging, are urging these systems toward the effective implementation of point of care devices. However, the generalization capabilities of learning-based models may be limited from biases caused by data obtained from other holographic imaging settings and/or different processing approaches. In this paper, we propose a combination of a Mask R-CNN to detect the cells, a convolutional auto-encoder, used to the image feature extraction and operating on unlabelled data, thus overcoming the bias due to data coming from different experimental settings, and a feedforward neural network for single cell classification, that operates on the above extracted features. We demonstrate the proposed approach in the challenging classification task related to the identification of drug-resistant endometrial cancer cells.

Beyond conventional microscopy: Observing kidney tissues by means of fourier ptychography.

Kidney microscopy is a mainstay in studying the morphological structure, physiology and pathology of kidney tissues, as histology provides important results for a reliable diagnosis. A microscopy modality providing at same time high-resolution images and a wide field of view could be very useful for analyzing the whole architecture and the functioning of the renal tissue. Recently, Fourier Ptychography (FP) has been proofed to yield images of biology samples such as tissues and in vitro cells while providing high resolution and large field of view, thus making it a unique and attractive opportunity for histopathology. Moreover, FP offers tissue imaging with high contrast assuring visualization of small desirable features, although with a stain-free mode that avoids any chemical process in histopathology. Here we report an experimental measuring campaign for creating the first comprehensive and extensive collection of images of kidney tissues captured by this FP microscope. We show that FP microscopy unlocks a new opportunity for the physicians to observe and judge renal tissue slides through the novel FP quantitative phase-contrast microscopy. Phase-contrast images of kidney tissue are analyzed by comparing them with the corresponding renal images taken under a conventional bright-field microscope both for stained and unstained tissue samples of different thicknesses. In depth discussion on the advantages and limitations of this new stain-free microscopy modality is reported, showing its usefulness over the classical light microscopy and opening a potential route for using FP in clinical practice for histopathology of kidney.

Label-Free Intracellular Multi-Specificity in Yeast Cells by Phase-Contrast Tomographic Flow Cytometry.

In-flow phase-contrast tomography provides a 3D refractive index of label-free cells in cytometry systems. Its major limitation, as with any quantitative phase imaging approach, is the lack of specificity compared to fluorescence microscopy, thus restraining its huge potentialities in single-cell analysis and diagnostics. Remarkable results in introducing specificity are obtained through artificial intelligence (AI), but only for adherent cells. However, accessing the 3D fluorescence ground truth and obtaining accurate voxel-level co-registration of image pairs for AI training is not viable for high-throughput cytometry. The recent statistical inference approach is a significant step forward for label-free specificity but remains limited to cells' nuclei. Here, a generalized computational strategy based on a self-consistent statistical inference to achieve intracellular multi-specificity is shown. Various subcellular compartments (i.e., nuclei, cytoplasmic vacuoles, the peri-vacuolar membrane area, cytoplasm, vacuole-nucleus contact site) can be identified and characterized quantitatively at different phases of the cells life cycle by using yeast cells as a biological model. Moreover, for the first time, virtual reality is introduced for handling the information content of multi-specificity in single cells. Full fruition is proofed for exploring and interacting with 3D quantitative biophysical parameters of the identified compartments on demand, thus opening the route to a metaverse for 3D microscopy.