RESUMO
Rapid, direct identification and quantitation of protein charge variants, and assessment of critical quality attributes with high sensitivity are important drivers required to accelerate the development of biotherapeutics. We describe the use of an enhanced microfluidic chip-based integrated imaged capillary isoelectric focusing-mass spectrometry (icIEF-MS) technology to assess multiple quality attributes of intact antibodies in a single run. Results demonstrate comprehensive detection of multiple charge variants of an aglycosylated knob-into-hole bispecific antibody. Upfront, on-chip separation by icIEF coupled to MS provides the orthogonal separation required to resolve and identify acidic posttranslational modifications including difficult-to-detect deamidation and glycation events at the intact protein level. In addition, on-chip UV detection enables pI determination and relative quantitation of charge isoforms. Six charge variant peaks were resolved by icIEF, mobilized toward the on-chip electrospray tip and directly identified by in-line icIEF-MS using a connected quadrupole time-of-flight mass spectrometer. In addition to acidic charge variants, basic variants were identified as C-terminal lysine, N-terminal cyclization, proline amidation, and the combination of modifications (not typically identified by other intact methods), including lysine and one or two hexose additions. Nonspecific chain cleavages were also resolved, along with their acidic charge variants, demonstrating highly sensitive and comprehensive intact antibody multi-attribute characterization within a 15-min run time.
Assuntos
Anticorpos Biespecíficos , Anticorpos Monoclonais , Anticorpos Monoclonais/análise , Microfluídica , Focalização Isoelétrica Capilar , Lisina , Eletroforese Capilar/métodos , Espectrometria de Massas/métodos , Focalização Isoelétrica/métodos , TecnologiaRESUMO
An international team spanning 19 sites across 18 biopharmaceutical and in vitro diagnostics companies in the United States, Europe, and China, along with one regulatory agency, was formed to compare the precision and robustness of imaged CIEF (ICIEF) for the charge heterogeneity analysis of the National Institute of Standards and Technology (NIST) mAb and a rhPD-L1-Fc fusion protein on the iCE3 and the Maurice instruments. This information has been requested to help companies better understand how these instruments compare and how to transition ICIEF methods from iCE3 to the Maurice instrument. The different laboratories performed ICIEF on the NIST mAb and rhPD-L1-Fc with both the iCE3 and Maurice using analytical methods specifically developed for each of the molecules. After processing the electropherograms, statistical evaluation of the data was performed to determine consistencies within and between laboratory and outlying information. The apparent isoelectric point (pI) data generated, based on two-point calibration, for the main isoform of the NIST mAb showed high precision between laboratories, with RSD values of less than 0.3% on both instruments. The SDs for the NIST mAb and the rhPD-L1-Fc charged variants percent peak area values for both instruments are less than 1.02% across different laboratories. These results validate the appropriate use of both the iCE3 and Maurice for ICIEF in the biopharmaceutical industry in support of process development and regulatory submissions of biotherapeutic molecules. Further, the data comparability between the iCE3 and Maurice illustrates that the Maurice platform is a next-generation replacement for the iCE3 that provides comparable data.
Assuntos
Produtos Biológicos , Eletroforese Capilar , Eletroforese Capilar/métodos , Focalização Isoelétrica/métodos , Laboratórios , Isoformas de ProteínasRESUMO
Residual host cell proteins (HCPs) present in biotherapeutics can pose potential safety risks for patients or affect product stability, thus prompting a critical need to monitor HCPs in drug substance or product to ensure product safety and quality. Current approaches for robust HCP identification at or above 10 ppm levels require either concatenated peptide fractionation or enrichment via antibody depletion, which challenges the direct quantitation of HCPs. This paper describes a simple, fast sample preparation method without the need for sample fractionation or enrichment; instead, we utilize trypsin-friendly sodium deoxycholate (SDC) as an advantageous denaturant that can be effectively removed following acidification at the end of sample digestion. This new approach enables the end-to-end one-dimensional liquid chromatography-tandem mass spectrometry (1D LC-MS/MS) workflow (i.e., from sample preparation to HCP identification) to be completed in 7-8 h while demonstrating the ability to consistently identify HCPs across a broad molecular weight range at 10 ppm or above.
Assuntos
Anticorpos Monoclonais/metabolismo , Cromatografia Líquida/métodos , Ácido Desoxicólico/metabolismo , Peptídeos/metabolismo , Proteínas Recombinantes/metabolismo , Espectrometria de Massas em Tandem/métodos , HumanosRESUMO
Methodologies employing LC-MS/MS have been increasingly used for characterization and identification of residual host cell proteins (HCPs) in biopharmaceutical products to ensure their consistent product quality and safety for patients. To improve the sensitivity and reliability for HCP detection, we developed a high pH-low pH two-dimensional reversed phase LC-MS/MS approach in conjunction with offline fraction concatenation. Proof-of -concept was established using a model in which seven proteins spanning a size range of 29-78 kDa are spiked into a purified antibody product to simulate the presence of low-level HCPs. By incorporating a tandem column configuration and a shallow gradient through the second-dimension, all seven proteins were consistently identified at 10 ppm with 100% success rate following LC-MS/MS analysis of six concatenated fractions across multiple analysts, column lots and injection loads. Using the more complex Universal Proteomic Standard 1 (UPS-1) as an HCP model, positive identification was consistently achieved for 19 of the 22 proteins in 8-12 ppm range (10 ppm ±20%). For the first time, we demonstrate an effective LC-MS/MS strategy that not only has high sensitivity but also high reliability for HCP detection. The method performance has high impact on pharmaceutical company practices in using advanced LC-MS/MS technology to ensure product quality and patient safety.
Assuntos
Anticorpos Monoclonais/análise , Cromatografia de Fase Reversa/métodos , Contaminação de Medicamentos , Espectrometria de Massas em Tandem/métodos , Animais , Bovinos , Cricetulus , Escherichia coli/química , Humanos , Sensibilidade e EspecificidadeRESUMO
Accurate and precise quantitative measurement of product-related variants of a therapeutic antibody is essential for product development and testing. Bispecific antibodies (bsAbs) are Abs composed of two different half antibody arms, each of which recognizes a distinct target, and recently they have attracted substantial therapeutic interest. Because of the increased complexity of its structure and its production process, as compared to a conventional monoclonal antibody, additional product-related variants, including covalent and noncovalent homodimers of half antibodies (hAbs), may be present in the bsAb product. Sufficient separation and reliable quantitation of these bsAb homodimers using liquid chromatography (LC) or capillary electrophoresis-based methods is challenging because these homodimer species and the bsAb often have similar physicochemical properties. Formation of noncovalent homodimers and heterodimers can also occur. In addition, since homodimers share common sequences with their corresponding halves and bsAb, it is not suitable to use peptides as surrogates for their quantitation. To tackle these analytical challenges, we developed a mass spectrometry-based quantitation method. Chip-based nanoflow LC-time-of-flight mass spectrometry coupled with a standard addition approach provided unbiased absolute quantitation of these drug-product-related variants. Two methods for the addition of known levels of standard (multi- or single-addition) were evaluated. Both methods demonstrated accurate and reproducible quantitation of homodimers at the 0.2% (w/w) level, with the single-addition method having the promise of higher analytical throughput.
Assuntos
Anticorpos/análise , Anticorpos/química , Proteínas Recombinantes/análise , Proteínas Recombinantes/química , Animais , Células CHO , Cricetulus , Espectrometria de Massas/instrumentaçãoRESUMO
Amino acid sequence variants are defined as unintended amino acid sequence changes that contribute to product variation with potential impact to product safety, immunogenicity, and efficacy. Therefore, it is important to understand the propensity for sequence variant (SV) formation during the production of recombinant proteins for therapeutic use. During the development of clinical therapeutic products, several monoclonal antibodies (mAbs) produced from Chinese Hamster Ovary (CHO) cells exhibited SVs at low levels (≤3%) in multiple locations throughout the mAbs. In these examples, the cell culture process depleted tyrosine, and the tyrosine residues in the recombinant mAbs were replaced with phenylalanine or histidine. In this work, it is demonstrated that tyrosine supplementation eliminated the tyrosine SVs, while early tyrosine starvation significantly increased the SV level in all mAbs tested. Additionally, it was determined that phenylalanine is the amino acid preferentially misincorporated in the absence of tyrosine over histidine, with no other amino acid misincorporated in the absence of tyrosine, phenylalanine, and histidine. The data support that the tyrosine SVs are due to mistranslation and not DNA mutation, most likely due to tRNA(Tyr) mischarging due to the structural similarities between tyrosine and phenylalanine.
Assuntos
Anticorpos Monoclonais/biossíntese , Tirosina/química , Animais , Anticorpos Monoclonais/química , Células CHO , Cricetinae , Cricetulus , Histidina/química , Fenilalanina/química , Proteínas Recombinantes/biossíntese , Proteínas Recombinantes/químicaRESUMO
Characterization of charge heterogeneity of recombinant monoclonal antibodies (mAbs) requires high throughput analytical methods to support clone selection and formulation screens. We applied the NanoPro technology to rapidly measure relative charge distribution of mAbs in early stage process development. The NanoPro is a multiplexed capillary-based isoelectric immunoassay with whole-column imaging detection. This assay offers specificity, speed and sensitivity advantages over conventional capillary isoelectric focusing (CIEF) platforms. After CIEF, charge variants are photochemically immobilized to the wall of a short coated capillary. Once immobilized, mAbs are probed using a secondary anti-IgG conjugated with horseradish peroxidase. After flushing away excess reagents, secondary antibodies bound to their targets are then detected by chemiluminescence upon incubation with peroxidase reactive substrates. Charge heterogeneity as determined by chemiluminescence was similar to that measured by conventional CIEF technology with absorbance detection for purified mAbs and contaminated mAbs derived directly from host cellular extract. Upon method optimization, the automated CIEF immunoassay was applied to several mAbs of varying isoelectric points, demonstrating the suitability of NanoPro as a rugged high-throughput product characterization tool. Furthermore, qualification of detection sensitivity, precision, and dynamic range are reported with discussion of its advantages as an alternative approach to rapidly characterize charge variants during process development of mAbs.
Assuntos
Anticorpos Monoclonais/isolamento & purificação , Imunoensaio/métodos , Focalização Isoelétrica/métodos , Medições Luminescentes/métodos , Animais , Anticorpos Monoclonais/química , Anticorpos Monoclonais/imunologia , Anticorpos Monoclonais/metabolismo , Células CHO , Cricetinae , Cricetulus , Elétrons , Peroxidase do Rábano Silvestre/metabolismo , Concentração de Íons de Hidrogênio , Limite de Detecção , Modelos Lineares , Reprodutibilidade dos TestesRESUMO
This paper describes the framework of quality by design applied to the development, optimization and validation of a sensitive capillary electrophoresis-sodium dodecyl sulfate (CE-SDS) assay for monitoring impurities that potentially impact drug efficacy or patient safety produced in the manufacture of therapeutic MAb products. Drug substance or drug product samples are derivatized with fluorogenic 3-(2-furoyl)quinoline-2-carboxaldehyde and nucleophilic cyanide before separation by CE-SDS coupled to LIF detection. Three design-of-experiments enabled critical labeling parameters to meet method requirements for detecting minor impurities while building precision and robustness into the assay during development. The screening design predicted optimal conditions to control labeling artifacts while two full factorial designs demonstrated method robustness through control of temperature and cyanide parameters within the normal operating range. Subsequent validation according to the guidelines of the International Committee of Harmonization showed the CE-SDS/LIF assay was specific, accurate, and precise (RSD ≤ 0.8%) for relative peak distribution and linear (R > 0.997) between the range of 0.5-1.5 mg/mL with LOD and LOQ of 10 ng/mL and 35 ng/mL, respectively. Validation confirmed the system suitability criteria used as a level of control to ensure reliable method performance.
Assuntos
Anticorpos Monoclonais/análise , Anticorpos Monoclonais/química , Eletroforese Capilar/métodos , Análise de Variância , Animais , Células CHO , Cricetinae , Cricetulus , Imunoglobulina G/análise , Imunoglobulina G/química , Modelos Lineares , Proteínas Recombinantes/análise , Proteínas Recombinantes/química , Reprodutibilidade dos Testes , Projetos de Pesquisa , Sensibilidade e Especificidade , Dodecilsulfato de SódioRESUMO
An amino acid sequence variant is defined as an unintended amino acid sequence change and contributes to product heterogeneity. Recombinant monoclonal antibodies (MAbs) are primarily expressed from Chinese Hamster Ovary (CHO) cells using stably transfected production cell lines. Selections and amplifications with reagents such as methotrexate (MTX) are often required to achieve high producing stable cell lines. Since MTX is often used to generate high producing cell lines, we investigated the genomic mutation rates of the hypoxanthine-guanine phosphoribosyltransferase (HGPRT or HPRT) gene using a 6-thioguanine (6-TG) assay under various concentrations of MTX selection in CHO cells. Our results show that the 6-TG resistance increased as the MTX concentration increased during stable cell line development. We also investigated low levels of sequence variants observed in two stable cell lines expressing different MAbs. Our data show that the replacement of serine at position 167 by arginine (S167R) in the light chain of antibody A (MAb-A) was due to a genomic nucleotide sequence change whereas the replacement of serine at position 63 by asparagine (S63N) in the heavy chain of antibody B (MAb-B) was likely due to translational misincorporation. This mistranslation is codon specific since S63N mistranslation is not detectable when the S63 AGC codon is changed to a TCC or TCT codon. Our results demonstrate that both a genomic nucleotide change and translational misincorporation can lead to low levels of sequence variants and mistranslation of serine to asparagine can be eliminated by substituting the TCC or TCT codon for the S63 AGC codon without impacting antibody productivity.
Assuntos
Substituição de Aminoácidos/fisiologia , Anticorpos Monoclonais/química , Anticorpos Monoclonais/metabolismo , Asparagina/química , Asparagina/metabolismo , Engenharia de Proteínas/métodos , Serina/química , Serina/metabolismo , Animais , Células CHO , Cricetinae , CricetulusRESUMO
Translation errors in protein biosynthesis may result in low level amino acid misincorporation and contribute to product heterogeneity of recombinant protein therapeutics. We report the use of peptide map analysis by reversed-phase high-performance liquid chromatography and high-resolution mass spectrometry to detect and identify mistranslation events in recombinant monoclonal antibodies expressed in mammalian cell lines including Chinese hamster ovary (CHO) cells. Misincorporation of an asparagine residue at multiple serine positions was detected as earlier-eluting peptides with masses 27.01 Da higher than expected. The exact positions at which misincorporation occurred were identified by tandem mass spectrometry of the asparagine-containing variant peptides. The identified asparagine misincorporation sites correlated with the use of codon AGC but with none of the other five serine codons. The relative levels of misincorporation ranged from 0.01%-0.2% among multiple serine positions detected across three different antibodies by targeted analysis of expected and variant peptides. The low levels of misincorporation are consistent with published predictions for in vivo translation error rates. Our results demonstrate that state-of-the-art mass spectrometry with a combination of high sensitivity, accuracy, and dynamic range provides a new ability to discover and characterize low level protein variants that arise from mistranslation events.
Assuntos
Anticorpos Monoclonais/biossíntese , Cromatografia Líquida de Alta Pressão/métodos , Cromatografia de Fase Reversa/métodos , Biossíntese de Proteínas/genética , Proteínas Recombinantes/biossíntese , Espectrometria de Massas por Ionização por Electrospray/métodos , Espectrometria de Massas em Tandem/métodos , Animais , Anticorpos Monoclonais/genética , Células CHO , Códon/genética , Cricetinae , Cricetulus , Proteínas Recombinantes/genéticaRESUMO
The sheath-flow cuvette is a key component in a high-sensitivity post-column laser-induced fluorescence detector for capillary electrophoresis. Most designs are based on commercial cuvettes originally manufactured for use in a flow cytometer. In these devices, a quartz flow chamber is held in a stainless-steel fixture that is difficult to machine and subjects the cuvette to a torque when sealed, which frequently leads to damage of the flow chamber. In this report we present a design for a cuvette that may easily be constructed. This design uses compression to hold and seal the quartz flow chamber without applying torque. The system produces detection limits (3sigma) of 115 yoctomoles (70 copies) for FQ-labeled carbonic anhydrase.
Assuntos
Anidrases Carbônicas/análise , Eletroforese Capilar/instrumentação , Lasers , Quartzo , Força Compressiva , Desenho de Equipamento , Fluorescência , Sensibilidade e Especificidade , TorqueRESUMO
A modular and adaptive mass spectrometry (MS)-based platform was developed to provide fast, robust and sensitive host cell protein (HCP) analytics to support process development. This platform relies on one-dimensional ultra-high performance liquid chromatography (1D UHPLC) combined with several different MS data acquisition strategies to meet the needs of purification process development. The workflow was designed to allow HCP composition and quantitation for up to 20 samples per day, a throughput considered essential for real time bioprocess development support. With data-dependent acquisition (DDA), the 1D UHPLC-MS/MS method had excellent speed and demonstrated robustness in detecting unknown HCPs at ≥ 50 ng/mg (ppm) level. Combining 1D UHPLC with sequential window acquisition of all theoretical spectra (SWATH) MS enabled simultaneous detection and quantitation of all HCPs in single-digit ng/mg range within 1 hour, demonstrating for the first time the benefit of SWATH MS as a technique for HCP analysis. As another alternative, a targeted MS approach can be used to track the clearance of specific known HCP under various process conditions. This study highlights the importance of designing a robust LC-MS/MS workflow that not only allows HCP discovery, but also affords greatly improved process knowledge and capability in HCP removal. As an orthogonal and complementary detection approach to traditional HCP analysis by enzyme-linked immunosorbent assay, the reported LC-MS/MS workflow supports the development of bioprocesses with optimal HCP clearance and the production of safe and high quality therapeutic biopharmaceuticals.
Assuntos
Espectrometria de Massas/métodos , Animais , Bovinos , Cricetinae , Cricetulus , Humanos , Espectrometria de Massas/instrumentaçãoRESUMO
A fast and improved sample preparation scheme was developed for protein analysis using capillary electrophoresis-sodium dodecyl sulfate (CE-SDS) with laser-induced fluorescence detection. This CE-SDS method was developed as a purity assay for recombinant monoclonal antibodies (rMAbs). In this assay, rMAbs are derivatized with the fluorogenic reagent 3-(2-furoyl)-quinoline-2-carboxaldehyde (FQ) in the presence of a nucleophile (CN-), which fluoresces only upon covalent binding to the protein. Purification after labeling is therefore not necessary to remove unreacted reagents. Proteins are incubated at 75 degrees C for 5 min to facilitate denaturation and labeling. For nonreduced preparation, rMAbs are labeled at pH 6.5 with a dye-to-protein (D/P) molar ratio of 50:1, which forms conjugates having 6 +/- 4 FQ labels. For reduced preparation, rMAbs are labeled at pH 9.3 with a D/P molar ratio of 10:1, which generates light chain conjugates incorporated with 3 +/- 2 FQ labels. Labeling artifacts such as fragmentation or aggregation are absent with use of alkylation reagents. This efficient labeling scheme generates detection limits for FQ-labeled rMAbs as low as 10 ng/mL. In comparison to other labeling strategies, labeling proteins with FQ has the advantage of speed, ease of use, and robust quantification.
Assuntos
Eletroforese Capilar/métodos , Corantes Fluorescentes/química , Proteínas/análise , Dodecilsulfato de Sódio/química , Espectrometria de Fluorescência/métodos , Alquilação , Anticorpos Monoclonais/análise , Furanos/química , Concentração de Íons de Hidrogênio , Lasers , Quinolinas/química , Proteínas Recombinantes/análise , Reprodutibilidade dos Testes , Sensibilidade e Especificidade , Temperatura , Fatores de TempoRESUMO
We report a system for automated protein analysis. In the system, proteins are labeled with the fluorogenic reagent 3-(2-furoyl)quinoline-2-carboxaldehyde, which reacts with lysine residues and creates a highly fluorescent product. These labeled proteins are analyzed by submicellar capillary electrophoresis at pH 7.5 to perform a first dimension separation. Once the first components migrate from the capillary, a fraction is transferred to a second dimension capillary, where electrophoresis is performed at pH 11.1 to further separate the proteins. Laser-induced fluorescence is used as an ultrasensitive detector of the separated proteins. Successive fractions are transferred from the first dimension capillary to the second dimension capillary for further separation to generate, in serial fashion, a two-dimensional electropherogram. The transfer of fractions is computer-controlled; there is no operator intervention once the sample has been injected. Zeptomoles of labeled proteins are detected, providing exquisite sensitivity.
Assuntos
Eletroforese Capilar/métodos , Proteínas de Neoplasias/análise , Adenocarcinoma/química , Automação , Eletroforese em Gel Bidimensional , Corantes Fluorescentes , Células HT29 , Humanos , Lasers , Proteínas de Neoplasias/isolamento & purificação , Sensibilidade e Especificidade , Espectrometria de FluorescênciaRESUMO
We have developed a two-dimensional capillary electrophoresis method for the study of protein expression in single mammalian cells. The first-dimension capillary contains an SDS-pullulan buffer system to perform capillary sieving electrophoresis, which separates proteins based on molecular weight. The second-dimension capillary contains an SDS buffer for micellar electrokinetic capillary chromatography. After a 6-min-long preliminary separation, fractions from the first capillary are successively transferred to a second capillary, where they undergo further separation by MECC. Over 100 transfers and second-dimension separations are performed over an approximately 3.5-h-long period. We demonstrate this technology by generating protein fingerprints from single native MC3T3-E1 osteoprogenitor cells and MC3T3-E1 cells transfected with the human transcription regulator TWIST. We also present single-cell protein fingerprints from MCF-7 breast cancer cells before and following treatment to induce apoptosis.
Assuntos
Cromatografia Capilar Eletrocinética Micelar/métodos , Eletroforese Capilar/métodos , Proteínas/isolamento & purificação , Animais , Neoplasias da Mama/patologia , Linhagem Celular Tumoral , Células Cultivadas , Feminino , Humanos , Camundongos , Peso Molecular , Osteoblastos/citologia , Osteoblastos/metabolismo , Proteínas/metabolismo , Fatores de Transcrição/fisiologia , Células Tumorais CultivadasRESUMO
We report the one- and two-dimensional (1-D and 2-D) capillary electrophoresis separation of Deinococcus radiodurans protein homogenate. Proteins are labeled with the fluorogenic reagent 3-(2-furoyl)quinoline-2-carboxaldehyde (FQ), which reacts with lysine residues and creates a highly fluorescent product. Detection is by laser-induced fluorescence. 1-D capillary sieving electrophoresis (CSE) produces over 150,000 plates and micellar electrokinetic capillary chromatography (MEKC) produces over 900,000 plates for components in a D. radiodurans protein homogenate. In a 2-D separation, proteins are first separated by CSE. Fractions are repetitively transferred to a second capillary for further separation based on MEKC. The 2-D separation has a approximately 550 spot capacity. Over 150 components are partially resolved from the homogenate. Resolution is limited in the first dimension by diffusion of proteins during the long separation period and in the second dimension by the combination of a long fraction-transfer time and short separation period.