RESUMO
Free radicals and oxidants may cause various damages both to the lifeworld and different products. A typical solution for the prophylaxis of oxidation-caused conditions is the usage of various antioxidants. Among them, various classes are found-polyphenols, conjugated polyalkenes, and some sulfur and nitrogen derivatives. Regarding the active site in the molecules, a widely discussed group of compounds are 1,3-dicarbonyl compounds. Among them are natural (e.g., curcumin and pulvinic acids) and synthetic (e.g., 4-hydroxy coumarins, substituted Meldrum's acids) compounds. Herein, information about various compounds containing the 1,3-dicarbonyl moiety is covered, and their antiradical and antioxidant activity, depending on the structure, is discussed.
RESUMO
In this study, previously developed acetoacetates of two tall-oil-based and two commercial polyols were used to obtain polymers by the Michael reaction. The development of polymer formulations with varying cross-link density was enabled by different bio-based monomers in combination with different acrylates-bisphenol A ethoxylate diacrylate, trimethylolpropane triacrylate, and pentaerythritol tetraacrylate. New polymer materials are based on the same polyols that are suitable for polyurethanes. The new polymers have qualities comparable to polyurethanes and are obtained without the drawbacks that come with polyurethane extractions, such as the use of hazardous isocyanates or reactions under harsh conditions in the case of non-isocyanate polyurethanes. Dynamic mechanical analysis, differential scanning calorimetry, thermal gravimetric analysis, and universal strength testing equipment were used to investigate the physical and thermal characteristics of the created polymers. Polymers with a wide range of thermal and mechanical properties were obtained (glass transition temperature from 21 to 63 °C; tensile modulus (Young's) from 8 MPa to 2710 MPa and tensile strength from 4 to 52 MPa). The synthesized polymers are thermally stable up to 300 °C. The suggested method may be used to make two-component polymer foams, coatings, resins, and composite matrices.
RESUMO
The valuable products that can be isolated from spent coffee ground (SCG) biomass consist of a high number of bioactive components, which are suitable for further application as raw materials in various production chains. This paper presents the potential value of the SCG obtained from large and local coffee beverage producers, for the production of valuable, biologically active products. Despite its high potential, SCG has not been utilized to its full potential value, but is instead discarded as waste in landfills. During its decomposition, SCG emits a large amount of CO2 and methane each year. The main novelty of our work is the implementation of sequential extraction with solvents of increased polarity that allows for the maximal removal of the available extractives. In addition, we have compared different extraction techniques, such as conventional and Soxhlet extraction, with more effective accelerated solvent extraction (ASE), which has seen relatively little use in terms of SCG extraction. By comparing these extraction methods and highlighting the key differences between them in terms of extraction yield and obtained extract composition, this work offers key insights for further SCG utilization. By using sequential and one-step accelerated solvent extraction, it is possible to obtain a significant number of extractives from SCG, with a yield above 20% of the starting biomass. The highest yield is for coffee oil, which is obtained with n-hexane ranging between 12% and 14% using accelerated solvent extraction (ASE) according to the scheme: n-hexaneâethyl acetateâ60% ethanol. Using single-stage extraction, increasing the ethanol concentration also increases the total phenolic content (TPC) and it ranges between 18.7-23.9 Gallic acid equivalent (GAE) mg/g. The iodine values in the range of 164-174 using ASE and Soxhlet extraction shows that the hexane extracts contain a significant amount of unsaturated fatty acids; coffee oils with a low acid number, in the range of 4.74-6.93, contain few free fatty acids. The characterization of separated coffee oil has shown that it mainly consists of linoleic acid, oleic acid, palmitic acid, stearic acid and a small number of phenolic-type compounds.
RESUMO
In this study, the synthesis of a Michael donor compound from cellulose production by-products-tall oil fatty acids-was developed. The developed Michael donor compounds can be further used to obtain polymeric materials after nucleophilic polymerization through the Michael reaction. It can be a promising alternative method for conventional polyurethane materials, and the Michael addition polymerization reaction takes place under milder conditions than non-isocyanate polyurethane production technology, which requires high pressure, high temperature and a long reaction time. Different polyols, the precursors for Michael donor components, were synthesized from epoxidized tall oil fatty acids by an oxirane ring-opening and esterification reaction with different alcohols (trimethylolpropane and 1,4-butanediol). The addition of functional groups necessary for the Michael reaction was carried out by a transesterification reaction of polyol hydroxyl groups with tert-butyl acetoacetate ester. The following properties of the developed polyols and their acetoacetates were analyzed: hydroxyl value, acid value, moisture content and viscosity. The chemical structure was analyzed using Fourier transform infrared spectroscopy, gel permeation chromatography, size-exclusion chromatography and nuclear magnetic resonance. Matrix-assisted laser desorption/ionization analysis was used for structure identification for this type of acetoacetate for the first time.
RESUMO
A second-generation bio-based feedstock-tall oil fatty acids-was epoxidised via two pathways. Oxirane rings were introduced into the fatty acid carbon backbone using a heterogeneous epoxidation catalyst-ion exchange resin Amberlite IR-120 H or enzyme catalyst Candida antarctica lipase B under the trade name Novozym® 435. High functionality bio-polyols were synthesised from the obtained epoxidated tall oil fatty acids by oxirane ring-opening and subsequent esterification reactions with different polyfunctional alcohols: trimethylolpropane and triethanolamine. The synthesised epoxidised tall oil fatty acids (ETOFA) were studied by proton nuclear magnetic resonance. The chemical structure of obtained polyols was studied by Fourier-transform infrared spectroscopy and size exclusion chromatography. Average molecular weight and polydispersity of polyols were determined from size exclusion chromatography data. The obtained polyols were used to develop rigid polyurethane (PU) foam thermal insulation material with an approximate density of 40 kg/m3. Thermal conductivity, apparent density and compression strength of the rigid PU foams were determined. The rigid PU foams obtained from polyols synthesised using Novozym® 435 catalyst had superior properties in comparison to rigid PU foams obtained from polyols synthesised using Amberlite IR-120 H. The developed rigid PU foams had an excellent thermal conductivity of 21.2-25.9 mW/(m·K).
RESUMO
Birch-bark triterpenoids and their semi-synthetic derivatives possess a wide range of biological activities including cytotoxic effects on various tumor cell lines. However, due to the low solubility and bioavailability, their medicinal applications are rather limited. The use of various nanotechnology-based drug delivery systems is a rapidly developing approach to the solubilization of insufficiently bioavailable pharmaceuticals. Herein, the drug delivery systems deemed to be applicable for birch-bark triterpenoid structures are reviewed. The aforementioned disadvantages of birch-bark triterpenoids and their semi-synthetic derivatives can be overcome through their incorporation into organic nanoparticles, which include various dendrimeric systems, as well as embedding the active compounds into polymer matrices or complexation with carbohydrate nanoparticles without covalent bonding. Some of the known triterpenoid delivery systems consist of nanoparticles featuring inorganic cores covered with carbohydrates or other polymers. Methods for delivering the title compounds through encapsulation and emulsification into lipophilic media are also suitable. Besides, the birch-bark triterpenoids can form self-assembling systems with increased bio-availability. Even more, the self-assembling systems are used as carriers for delivering other chemotherapeutic agents. Another advantage besides increased bioavailability and anticancer activity is the reduced overall systemic toxicity in most of the cases, when triterpenoids are delivered with any of the carriers.
Assuntos
Betula , Antineoplásicos , Linhagem Celular Tumoral , Humanos , Casca de Planta , TriterpenosRESUMO
In the title compound, C16H20O4, a new starting compound for the synthesis of various heterocycles, the partially saturated six-membered ring adopts a sofa conformation. An intra-molecular O-Hâ¯O hydrogen bond is observed in the guaiacol residue. In the crystal, mol-ecules are assembled into a sheet structure parallel to the ab plane via O-Hâ¯O hydrogen bonds. The hydrogen-bond pattern is described by an R44(28) graph-set motif. The sheets are further linked by C-Hâ¯O hydrogen bonds into a three-dimensional network.
RESUMO
An efficient protocol for the synthesis of novel lupane triterpenoid-indazolone hybrids with oxime ester linkage has been developed from naturally accessible precursor betulin. For the first time a series of betulonic acid-indazolone hybrids have been synthesized via an acylation of corresponding 6,7-dihydro-1H-indazol-4(5H)-one oximes with betulonic acid chloride. Diastereoselective reduction of the obtained betulonic acid conjugates with NaBH4 resulted in a formation of betulinic acid-indazolone hybrids in excellent yields. The configuration of the key compounds has been fully established by X-ray and 2D NMR analysis.
Assuntos
Triterpenos/química , Estrutura Molecular , Ácido Oleanólico/análogos & derivados , Ácido Oleanólico/química , Triterpenos Pentacíclicos , Relação Estrutura-Atividade , Ácido BetulínicoRESUMO
The title compound, C22H16N2O2 {systematic name: 3-(4-hy-droxy-phen-yl)-2-[(E)-2-phenyl-ethen-yl]quinazolin-4(3H)-one}, consists of a substituted 2-[(E)-2-aryl-ethen-yl]-3-aryl-quinazolin-4(3H)-one skeleton. The substituents at the ethyl-ene fragment are located in trans positions. The phenyl ring is inclined to the quinazolone ring by 26.44â (19)°, while the 4-hy-droxy-phenyl ring is inclined to the quinazolone ring by 81.25â (8)°. The phenyl ring and the 4-hy-droxy-phenyl ring are inclined to one another by 78.28â (2)°. In the crystal, mol-ecules are connected via O-Hâ¯O hydrogen bonds, forming a helix along the a-axis direction. The helices are linked by C-Hâ¯π inter-actions, forming slabs parallel to (001).
RESUMO
C-Alkyl (including C-arylmethyl) derivatives of Meldrum's acids are attractive building blocks in organic synthesis, mainly due to the unusually high acidity of the resulting compounds. Three examples, namely 5-[4-(diethylamino)benzyl]-2,2-dimethyl-1,3-dioxane-4,6-dione, C17H23NO4, (I), 2,2-dimethyl-5-(2,4,6-trimethoxybenzyl)-1,3-dioxane-4,6-dione, C16H20O7, (II), and 5-(4-hydroxy-3,5-dimethoxybenzyl)-2,2-dimethyl-1,3-dioxane-4,6-dione, C15H18O7, (III), have been synthesized, characterized by NMR and IR spectroscopy, and studied by single-crystal X-ray structure analysis. The nature of the different substituents resulted in remarkable differences in both the molecular conformations and the crystal packing arrangements. The presence of a substituent with a basic centre in compound (I) leads to the formation of an inner salt accompanied by drastic changes in the conformation of the 1,3-dioxane-4,6-dione fragment. By virtue of strong N-H···O hydrogen bonds, the residues are assembled into infinite chains with the graph-set descriptor C(10). Compound (II) contains methoxy groups in both the ortho- and para-positions of the arylmethyl fragment. Because of the absence of classical hydrogen-bond donors in this structure, the crystal packing is controlled by van der Waals forces and weak C-H···O interactions. Compound (III) contains methoxy groups in both meta-positions and a hydroxy group in the para-position. Supramolecular tetrameric synthons which comprise hydrogen-bonded dimers associated into tetramers through π-π interactions of overlapping benzene rings were observed.
RESUMO
The title compound, C17H21NO4, consists of substituted Meldrum's acid with a [4-(di-ethyl-amino)-phen-yl]methyl-idene fragment attached to the fifth position. The heterocycle assumes a distorted boat conformation. The planar part of heterocycle is almost coplanar with the benzene ring due to the presence of a long conjugated system in the mol-ecule. This leads to the formation of C-Hâ¯O-type intra-molecular contacts. As a result of the absence of hydrogen-bond donors in the structure, the crystal packing is controlled by van der Waals forces and weak C-Hâ¯O inter-actions, which associate the mol-ecules into inversion dimers.