Operando Studies of Bismuth Nanoparticles Embedded in N, O-Doped Porous Carbon for High-Performance Potassium-Ion Hybrid Capacitor.

A highly viable alternative to lithium-ion batteries for stationary electrochemical energy-storage systems is the potassium dual-ion hybrid capacitor (PIHC), especially toward fast-charging capability. However, the sluggish reaction kinetics of negative electrode materials seriously impedes their practical implementation. In this paper, a new negative electrode Bi@RPC (Nano-bismuth confined in nitrogen- and oxygen-doped carbon with rationally designed pores, evidenced by advanced characterization) is developed, leading to a remarkable electrochemical performance. PIHCs building with the active carbon YP50F positive electrode result in a high operation voltage (0.1-4 V), and remarkably well-retained energy density at a high-power density (11107 W kg-1 at 98 Wh kg-1 ). After 5000 cycles the proposed PHICs still show a superior capacity retention of 92.6%. Moreover, a reversible mechanism of "absorption-alloying" of the Bi@RPC nanocomposite is revealed by operando synchrotron X-ray diffraction and Raman spectroscopy. With the synergistic potassium ions storage mechanism arising from the presence of well-structured pores and nano-sized bismuth, the Bi@RPC electrode exhibits an astonishingly rapid kinetics and high energy density. The results demonstrate that PIHCs with Bi@RPC-based negative electrode is the promising option for simultaneously high-capacity and fast-charging energy storage devices.

Carbons Derived from Regenerated Spherical Cellulose as Anodes for Li-Ion Batteries at Elevated Temperatures.

Biomass-based materials have emerged as a promising alternative to the conventional graphite anode in Li-ion batteries due to their renewability, low cost, and environmental friendliness. Therefore, a facile synthesis method for porous hard carbons based on cellulose acetate microspheres and bead cellulose is used, and their application as anode materials in Li-ion batteries is discussed. The resulting porous carbons exhibit promising electrochemical characteristics, including a reversible capacity of about 300 mAh g-1 at 0.1 C (37 mA g-1) after 50 cycles, and stable capacities up to 210 mAh g-1 over 1000 cycles at 1 C (372 mA g-1) in half-cells for cellulose acetate microspheres carbonised at 1200 °C. Moreover, at 60 °C cellulose-derived carbons show higher specific capacities than graphite (300 mAh g-1 vs 240 mAh g-1 at 1 C after 500 cycles), indicating their potential for use in high-temperature applications. The different charge storage mechanisms of the prepared hard carbon materials and graphite are observed. While capacity of graphite is mainly controlled by the Faradaic redox process, the cellulose-derived carbons combine Faradaic intercalation and capacitive charge adsorption.

Realizing Highly-Ordered Laser-Reduced Graphene for High-Performance Flexible Microsupercapacitor.

Laser reduction of graphene oxide (GO) with direct-write technology is promising to develop miniaturized energy storage devices because of highly flexible, mask-free, and chemical-free merits. However, laser reduction of GO is often accompanied with deflagration (spectacular and violent deoxygenating reaction), leading reduced graphene oxide (rGO) films into brittle and irregular internal structure which is harmful to the applications. Here, a pre-reduction strategy is demonstrated to avoid this deflagration and realize a uniform laser-reduced GO (LrGO) matrix for the application of flexible micro-supercapacitors (MSCs).The pre-reduction process with ascorbic acid decreases the content of oxygen-containing functional groups on GO in advance, and thus relieves gases emission and avoids unconstrained expansion during the laser reduction process. In addition, a self-assembled skeleton with pre-reduced GO (PGO) nanosheets could be constructed which is a more appropriate aforehand framework for laser reduction to establish controllable rGO films with the homogenous porosity. The quasi-solid-state MSCs assembled with laser-reduced PGO exhibit the maximum areal capacitance of 88.32 mF cm-2 , good cycling performance (capacitance retention of 82% after 2000 cycles), and outstanding flexibility (no capacitance degradation after bending for 5000 times). This finding provides opportunities to enhance quality of LrGO which is promising for micro-power devices and beyond.

Sodium-Vanadium Bronze Na9V14O35: An Electrode Material for Na-Ion Batteries.

Na9V14O35 (η-NaxV2O5) has been synthesized via solid-state reaction in an evacuated sealed silica ampoule and tested as electroactive material for Na-ion batteries. According to powder X-ray diffraction, electron diffraction and atomic resolution scanning transmission electron microscopy, Na9V14O35 adopts a monoclinic structure consisting of layers of corner- and edge-sharing VO5 tetragonal pyramids and VO4 tetrahedra with Na cations positioned between the layers, and can be considered as sodium vanadium(IV,V) oxovanadate Na9V104.1+O19(V5+O4)4. Behavior of Na9V14O35 as a positive and negative electrode in Na half-cells was investigated by galvanostatic cycling against metallic Na, synchrotron powder X-ray diffraction and electron energy loss spectroscopy. Being charged to 4.6 V vs. Na+/Na, almost 3 Na can be extracted per Na9V14O35 formula, resulting in electrochemical capacity of ~60 mAh g-1. Upon discharge below 1 V, Na9V14O35 uptakes sodium up to Na:V = 1:1 ratio that is accompanied by drastic elongation of the separation between the layers of the VO4 tetrahedra and VO5 tetragonal pyramids and volume increase of about 31%. Below 0.25 V, the ordered layered Na9V14O35 structure transforms into a rock-salt type disordered structure and ultimately into amorphous products of a conversion reaction at 0.1 V. The discharge capacity of 490 mAh g-1 delivered at first cycle due to the conversion reaction fades with the number of charge-discharge cycles.

Comparison of Layered Li(Li0.2Rh0.8)O2 and LiRhO2 upon Li Removal: Stabilizing Effect of Li Substitution.

Phase transformations upon delithiation in layered oxides with the NaCrS2 structure type are widely studied for numerous combinations of 3d transition metals because of the application of LiCoO2 and its derivatives as cathode materials in rechargeable Li-ion batteries. However, complete replacement of 3d by 4d transition metals still yields phenomena never seen in compounds containing 3d metals only. In the present work, the structural evolution of Li-rich O3-Li(Li0.2Rh0.8)O2, having a mixed occupancy of 20% Li and 80% Rh in the metal-O slabs, was studied during electrochemical Li removal and insertion and compared with the isostructural stoichiometric LiRhO2. The latter compound undergoes a transformation from the layered NaCrS2 to the tunnel-like rutile-ramsdellite intergrowth structure of the γ-MnO2 type. Partial replacement of Rh by Li, in contrast, completely prevents this transition, resulting in a reversible cell expansion and shrinkage within the layered structure upon (de)lithiation. Moreover, no anomalously short Rh-O and O-O distances were observed in Lix≈0(Li0.2Rh0.8)O2 with the Rh4.75+ intermediate valence state at 4.8 V, in contrast to Lix≈0RhO2 with Rh4+ at 4.2 V, as confirmed by operando synchrotron X-ray diffraction and extended X-ray absorption fine structure studies. We believe that the difference in the Li-O and Rh-O covalency is responsible for the observed structural stabilization. The longer and more ionic Li-O bonds in the (Li,Rh)O2 layers impede the shortening of O-O distances needed for transformation to the γ-MnO2 type because of a higher negative charge on O anions connected to Li cations and the stronger electrostatic repulsion between them.

Synthesis of (Li2Fe1-yMny)SO Antiperovskites with Comprehensive Investigations of (Li2Fe0.5Mn0.5)SO as Cathode in Li-ion Batteries.

A series of solid solutions (Li2Fe1-yMny)SO with a cubic antiperovskite structure was successfully synthesized. The composition (Li2Fe0.5Mn0.5)SO was intensively studied as a cathode in Li-ion batteries showing a reversible specific capacity of 120 mA h g-1 and almost a 100% Coulombic efficiency after 50 cycles at 0.1C meaning extraction/insertion of 1 Li per formula unit during 10 h. Operando X-ray absorption spectroscopy confirmed the redox activity of both Fe2+ and Mn2+ cations during battery charge and discharge, while operando synchrotron X-ray diffraction studies revealed a reversible formation of a second isostructural phase upon Li-removal and insertion at least for the first several cycles. In comparison to (Li2Fe)SO, the presence of Mn stabilizes the crystal structure of (Li2Fe0.5Mn0.5)SO during battery operation, although post mortem TEM studies confirmed a gradual amorphization after 50 cycles. A lower specific capacity of (Li2Fe0.5Mn0.5)SO in comparison to (Li2Fe)SO is probably caused by slower kinetics, especially in the two-phase region, as confirmed by Li-diffusion coefficient measurements.

Synthesis, Characterization, and Electrochemistry of Layered Chalcogenides LiCu Ch ( Ch = Se, Te).

Two novel compounds, LiCu Ch ( Ch = Se or Te), were synthesized by direct reaction between elements in closed ampules inside corundum crucibles. Both compounds are highly air-sensitive and possess an anti-PbClF crystal structure, which contains Cu Ch layer analogues to the Fe[As/Se] layers in Fe-based superconductors. In electrochemical battery cells, Li can be almost completely extracted from LiCuSe, but the reverse reaction is only partly successful and Li2Se and Cu2- xSe are formed instead. LiCuSe exhibits a temperature independent and slightly positive magnetic susceptibility. From 7Li NMR measurements, the activation energy of the Li ion diffusion process is about 0.5 eV but is slightly lower for LiCuTe as compared to LiCuSe. Also, the small and almost temperature independent NMR shifts of the 7Li nucleus indicate the absence of Pauli paramagnetism in these compounds, consistent with a 3 d10 full valence state of the Cu ions.

Layered-to-Tunnel Structure Transformation and Oxygen Redox Chemistry in LiRhO2 upon Li Extraction and Insertion.

Layered Li(M,Li)O2 (where M is a transition metal) ordered rock-salt-type structures are used in advanced metal-ion batteries as one of the best hosts for the reversible intercalation of Li ions. Besides the conventional redox reaction involving oxidation/reduction of the M cation upon Li extraction/insertion, creating oxygen-located holes because of the partial oxygen oxidation increases capacity while maintaining the oxidized oxygen species in the lattice through high covalency of the M-O bonding. Typical degradation mechanism of the Li(M,Li)O2 electrodes involves partially irreversible M cation migration toward the Li positions, resulting in gradual capacity/voltage fade. Here, using LiRhO2 as a model system (isostructural and isoelectronic to LiCoO2), for the first time, we demonstrate an intimate coupling between the oxygen redox and M cation migration. A formation of the oxidized oxygen species upon electrochemical Li extraction coincides with transformation of the layered Li1-xRhO2 structure into the γ-MnO2-type rutile-ramsdellite intergrowth LiyRh3O6 structure with rutile-like [1 × 1] channels along with bigger ramsdellite-like [2 × 1] tunnels through massive and concerted Rh migration toward the empty positions in the Li layers. The oxidized oxygen dimers with the O-O distances as short as 2.26 Å are stabilized in this structure via the local Rh-O configuration reminiscent to that in the µ-peroxo-µ-hydroxo Rh complexes. The LiyRh3O6 structure is remarkably stable upon electrochemical cycling illustrating that proper structural implementation of the oxidized oxygen species can open a pathway toward deliberate employment of the anion redox chemistry in high-capacity/high-voltage positive electrodes for metal-ion batteries.

A High-Energy Tellurium Redox-Amphoteric Conversion Cathode Chemistry for Aqueous Zinc Batteries.

Rechargeable aqueous zinc batteries are potential candidates for sustainable energy storage systems at a grid scale, owing to their high safety and low cost. However, the existing cathode chemistries exhibit restricted energy density, which hinders their extensive applications. Here, a tellurium redox-amphoteric conversion cathode chemistry is presented for aqueous zinc batteries, which delivers a specific capacity of 1223.9 mAh gTe -1 and a high energy density of 1028.0 Wh kgTe -1. A highly concentrated electrolyte (30 mol kg-1 ZnCl2) is revealed crucial for initiating the Te redox-amphoteric conversion as it suppresses the H2O reactivity and inhibits undesirable hydrolysis of the Te4+ product. By carrying out multiple operando/ex situ characterizations, the reversible six-electron Te2-/Te0/Te4+ conversion with TeCl4 is identified as the fully charged product and ZnTe as the fully discharged product. This finding not only enriches the conversion-type battery chemistries but also establishes a critical step in exploring redox-amphoteric materials for aqueous zinc batteries and beyond.

Na2Fe2Se2O: a double anti-perovskite with prevalence of anionic redox activity in Na-ion batteries.

Na2Fe2Se2O with the I4/mmm space group was studied in sodium-ion batteries, delivering a reversible specific capacity of more than 140 mA h g-1. Operando XRD and XAS studies disclosed bifunctional redox behaviour with the prevalence of anionic electrochemical activity and a likely partial decomposition of the material, which, however, does not influence the electrochemical behaviour of the system.

Antioxidant Properties and Geroprotective Potential of Wheat Bran Extracts with Increased Content of Anthocyanins.

In recent years, there has been a focus on breeding wheat with high anthocyanin levels in order to improve food quality and human health. The objective of this study was to examine the antioxidant and geroprotective properties of wheat bran extracts using both in vitro and in vivo research methods. Two wheat lines were used: one with uncolored pericarp (anthocyanin-free) and another with colored pericarp (anthocyanin-containing). These lines differed in a specific region of chromosome 2A containing the Pp3/TaMyc1 gene, which regulates anthocyanin production. High-performance liquid chromatography-mass spectrometry revealed the presence of cyanidin glucoside and cyanidin arabinoside in the anthocyanin-containing wheat bran extract (+AWBE), while no anthocyanins were found in the anthocyanin-free wheat bran extract (-AWBE). The +AWBE showed higher radical scavenging activity (DPPH and ABTS assays) and membrane protective activity (AAPH oxidative hemolysis model) compared to the -AWBE. Both extracts extended the lifespan of female Drosophila, indicating geroprotective properties. This study demonstrates that wheat bran extracts with high anthocyanin levels have antioxidant and geroprotective effects. However, other secondary metabolites in wheat bran can also contribute to its antioxidant and geroprotective potential.

Redox-Active Metaphosphate-Like Terminals Enable High-Capacity MXene Anodes for Ultrafast Na-Ion Storage.

2D transition metal carbides and/or nitrides, so-called MXenes, are noted as ideal fast-charging cation-intercalation electrode materials, which nevertheless suffer from limited specific capacities. Herein, it is reported that constructing redox-active phosphorus-oxygen terminals can be an attractive strategy for Nb4 C3 MXenes to remarkably boost their specific capacities for ultrafast Na+ storage. As revealed, redox-active terminals with a stoichiometric formula of PO2 - display a metaphosphate-like configuration with each P atom sustaining three PO bonds and one PO dangling bond. Compared with conventional O-terminals, metaphosphate-like terminals empower Nb4 C3 (denoted PO2 -Nb4 C3 ) with considerably enriched carrier density (fourfold), improved conductivity (12.3-fold at 300 K), additional redox-active sites, boosted Nb redox depth, nondeclined Na+ -diffusion capability, and buffered internal stress during Na+ intercalation/de-intercalation. Consequently, compared with O-terminated Nb4 C3 , PO2 -Nb4 C3 exhibits a doubled Na+ -storage capacity (221.0 mAh g-1 ), well-retained fast-charging capability (4.9 min at 80% capacity retention), significantly promoted cycle life (nondegraded capacity over 2000 cycles), and justified feasibility for assembling energy-power-balanced Na-ion capacitors. This study unveils that the molecular-level design of MXene terminals provides opportunities for developing simultaneously high-capacity and fast-charging electrodes, alleviating the energy-power tradeoff typical for energy-storage devices.

Local coordination of Fe3+ in Li[Co(0.98)Fe(0.02)]O2 as cathode material for lithium ion batteries-multi-frequency EPR and Monte-Carlo Newman-superposition model analysis.

The local coordination of the Fe(3+)-centers in Li[Co(0.98)Fe(0.02)]O(2) cathode materials for lithium-ion batteries has been investigated by means of XRD and multi-frequency EPR spectroscopy. EPR clearly showed the Fe(3+) being in a high-spin state with S = 5/2. The set of spin-Hamiltonian parameters obtained from multi-frequency EPR experiments with Larmor frequencies ranging between 9.8 and 406 GHz was transformed into structural information by means of an expansion to standard Newton-superposition modeling, termed as Monte-Carlo Newman superposition modeling. Based on this analysis, an isovalent incorporation of the Fe(3+)-ions on the Co(3+)-sites, i.e. Fe(x)(Co), has been shown. With that respect, the positive sign of the axial second-order fine-structure interaction parameter B(0)(2) is indicative of an elongated oxygen octahedron, whereas B(0)(2) < 0 points to a compressed octahedron coordinated about the Fe(3+)-center. Furthermore, the results obtained here suggest that the oxygen octahedron about the Fe(3+)-ion is slightly distorted as compared to the CoO(6) octahedron, which in turn may impose mechanical strain to the cathode material.

A tetragonal form of dysprosium orthomolybdate at room temperature.

In the present tetragonal modification of dysprosium orthomolybdate, Dy(2)(MoO(4))(3), the Dy, one Mo and one O atom are located on a mirror plane with Wyckoff symbol 4e, while another Mo atom is located on a fourfold inverse axis, Wyckoff symbol 2a. A single crystal was selected from a polycrystalline mixture of the Dy(2)O(3)-ZrO(2)-MoO(3) system and was stable at room temperature for at least three months. The structure refinement does not indicate the presence of Zr on the Dy sites (to within 1% accuracy). Thus, the stabilization of the tetragonal form is due to disordered positions for a second O atom and split positions for a third O atom that also maintain the DyO(7) coordination, which is not expected for short Dy-O distances [2.243 (6)-2.393 (5) Å].

A Facile Chemical Method Enabling Uniform Zn Deposition for Improved Aqueous Zn-Ion Batteries.

Rechargeable aqueous Zn-ion batteries (ZIBs) have gained great attention due to their high safety and the natural abundance of Zn. Unfortunately, the Zn metal anode suffers from dendrite growth due to nonuniform deposition during the plating/stripping process, leading to a sudden failure of the batteries. Herein, Cu coated Zn (Cu-Zn) was prepared by a facile pretreatment method using CuSO4 aqueous solution. The Cu coating transformed into an alloy interfacial layer with a high affinity for Zn, which acted as a nucleation site to guide the uniform Zn nucleation and plating. As a result, Cu-Zn demonstrated a cycling life of up to 1600 h in the symmetric cells and endowed a stable cycling performance with a capacity of 207 mAh g-1 even after 1000 cycles in the full cells coupled with a V2O5-based cathode. This work provides a simple and effective strategy to enable uniform Zn deposition for improved ZIBs.

Diethylzinc-Assisted Atomic Surface Reduction to Stabilize Li and Mn-Rich NCM.

Li and Mn-rich nickel cobalt manganese oxide (LMR-NCM) is one of the most promising cathode materials for realizing next-generation Li-ion batteries due to its high specific capacity of >250 mA h g-1 and operating potential > 4.5 V. Nevertheless, being plagued by severe capacity fading and voltage decay, the commercialization of LMR-NCM appears to be a distant goal. The anionic activity of oxygen and associated phase transformations are the reasons behind the unstable electrochemical performance. The tendency of LMR-NCM to react with CO2 and moisture further makes it prone to interfacial instability and degradation. Here, we report a neoteric method to mitigate the stability issues and improve the electrochemical performance of LMR-NCM by changing the electronic configuration of constituting O and transition metals via diethylzinc-assisted atomic surface reduction (Zn-ASR) using an extremely facile protocol. With the proposed Zn-ASR, a 2-3 nm thin layer of a reduced surface enriched with complex ZnOx or ZnOxRy was obtained on the LMR-NCM particles. X-ray photoelectron spectroscopy suggested the transfer of ethyl groups of diethylzinc to O atoms on the LMR-NCM surface, which ultimately led to the reduction of near-surface Mn and Ni atoms and impeded irreversible anionic activity. The presence of ZnOx/ZnOxRy also resulted in superior charge transfer and resistance against HF. As a result, in contrast to LMR-NCM, the Zn-ASR-treated sample exhibited substantially improved rate capabilities, facilitated charge transfer, enhanced capacity retention, reduced parasitic reactions, and long-term stability as reflected from in-depth electrochemical analysis, in operando gaseous evolution studies, and post-mortem microscopic analysis.

Uniform Zn Deposition Achieved by Ag Coating for Improved Aqueous Zinc-Ion Batteries.

Aqueous zinc-ion batteries (ZIBs) are considered as a promising energy storage system due to their low cost and high safety merits. However, they suffer from the challenge of uncontrollable dendrite growth due to a non-uniform zinc deposition, which increases internal resistance and causes battery failure. Herein, Ag coating fabricated by a facile surface chemistry route on zinc metal was developed to guide uniform zinc deposition. Ag-coated Zn shows improved electrolyte wettability, a small zinc deposition overpotential, and fast kinetics for zinc deposition/dissolution. Direct optical visualization and scanning electron microscopy images show uniform zinc deposition due to the introduction of Ag coating. As a result, the Ag-coated Zn anode can sustain up to 1450 h of repeated plating/stripping with a low overpotential in symmetric cells at a current density of 0.2 mA cm-2, while an improved performance is realized for full cells paired with a V2O5-based cathode. This work provides a facile and effective approach to improve the electrochemical performance of ZIBs.

High-Entropy Metal-Organic Frameworks for Highly Reversible Sodium Storage.

Prussian blue analogues (PBAs) are reported to be efficient sodium storage materials because of the unique advantages of their metal-organic framework structure. However, the issues of low specific capacity and poor reversibility, caused by phase transitions during charge/discharge cycling, have thus far limited the applicability of these materials. Herein, a new approach is presented to substantially improve the electrochemical properties of PBAs by introducing high entropy into the crystal structure. To achieve this, five different metal species are introduced, sharing the same nitrogen-coordinated site, thereby increasing the configurational entropy of the system beyond 1.5R. By careful selection of the elements, high-entropy PBA (HE-PBA) presents a quasi-zero-strain reaction mechanism, resulting in increased cycling stability and rate capability. The key to such improvement lies in the high entropy and associated effects as well as the presence of several active redox centers. The gassing behavior of PBAs is also reported. Evolution of dimeric cyanogen due to oxidation of the cyanide ligands is detected, which can be attributed to the structural degradation of HE-PBA during battery operation. By optimizing the electrochemical window, a Coulombic efficiency of nearly 100% is retained after cycling for more than 3000 cycles.

Operation Mechanism in Hybrid Mg-Li Batteries with TiNb2O7 Allowing Stable High-Rate Cycling.

We studied the structural evolution and cycling behavior of TiNb2O7 (TNO) as a cathode in a nonaqueous hybrid dual-salt Mg-Li battery. A very high fraction of pseudocapacitive contribution to the overall specific capacity makes the material suitable for ultrafast operation in a hybrid battery, composed of a Mg-metal anode, and a dual-salt APC-LiCl electrolyte with Li and Mg cations. Theoretical calculations show that Li intercalation is predominant over Mg intercalation into the TNO in a dual-salt electrolyte with Mg2+ and Li+, while experimentally up to 20% Mg cointercalation was observed after battery discharge. In hybrid Mg-Li batteries, TNO shows capacities which are about 40 mA h g-1 lower than in single-ion Li batteries at current densities of up to 1.2 A g-1. This is likely due to a partial Mg cointercalation or/and location of Li cations on alternative crystallographic sites in the TNO structure in comparison to the Li-intercalation process in Li batteries. Generally, hybrid Mg-Li cells show a markedly superior applicability for a very prolonged operation (above 1000 cycles) with 100% Coulombic efficiency and a capacity retention higher than 95% in comparison to conventional Li batteries with TNO after being cycled either under a low (7.75 mA g-1) or high (1.55 A g-1) current density. The better long-term behavior of the hybrid Mg-Li batteries with TNO is especially pronounced at 60 °C. The reasons for this are an appropriate cathode electrolyte interface containing MgCl2 species and a superior performance of the Mg anode in APC-LiCl electrolytes with a dendrite-free, fast Mg deposition/stripping. This stable interface stands in contrast to the anode electrolyte interface in Li batteries with a Li anode in conventional carbonate-containing electrolytes, which is prone to dendrite formation, thus leading to a battery shortcut.

In-Depth Study of Li4Ti5O12 Performing beyond Conventional Operating Conditions.

Lithium-ion batteries (LIBs) are nowadays widely used in many energy storage devices, which have certain requirements on size, weight, and performance. State-of-the-art LIBs operate very reliably and with good performance under restricted and controlled conditions but lack in efficiency and safety when these conditions are exceeded. In this work, the influence of outranging conditions in terms of charging rate and operating temperature on electrochemical characteristics was studied on the example of lithium titanate (Li4Ti5O12, LTO) electrodes. Structural processes in the electrode, cycled with ultrafast charge and discharge, were evaluated by operando synchrotron powder diffraction and ex situ X-ray absorption spectroscopy. On the basis of the Rietveld refinement, it was shown that the electrochemical storage mechanism is based on the Li-intercalation process at least up to current rates of 5C, meaning full battery charge within 12 min. For applications at temperatures between -30 and 60 °C, four carbonate-based electrolyte systems with different additives were tested for cycling performance in half-cells with LTO and metallic lithium as electrodes. It was shown that the addition of 30 wt % [PYR14][PF6] to the conventional LP30 electrolyte, usually used in LIBs, significantly decreases its melting point, which enables the successful low-temperature application at least down to -30 °C, in contrast to LP30, which freezes below -10 °C, making battery operation impossible. Moreover, at elevated temperatures up to 60 °C, batteries with the LP30/[PYR14][PF6] electrolyte exhibit stable long-term cycling behavior very close to LP30. Our findings provide a guideline for the application of LTO in LIBs beyond conventional conditions and show how to overcome limitations by designing appropriate electrolytes.