Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 20
Filtrar
Mais filtros

Base de dados
Tipo de documento
Intervalo de ano de publicação
1.
Nature ; 569(7757): 542-545, 2019 05.
Artigo em Inglês | MEDLINE | ID: mdl-31118522

RESUMO

Amorphous water ice comes in at least three distinct structural forms, all lacking long-range crystalline order. High-density amorphous ice (HDA) was first produced by compressing ice I to 11 kilobar at temperatures below 130 kelvin, and the process was described as thermodynamic melting1, implying that HDA is a glassy state of water. This concept, and the ability to transform HDA reversibly into low-density amorphous ice, inspired the two-liquid water model, which relates the amorphous phases to two liquid waters in the deeply supercooled regime (below 228 kelvin) to explain many of the anomalies of water2 (such as density and heat capacity anomalies). However, HDA formation has also been ascribed3 to a mechanical instability causing structural collapse and associated with kinetics too sluggish for recrystallization to occur. This interpretation is supported by simulations3, analogy with a structurally similar system4, and the observation of lattice-vibration softening as ice is compressed5,6. It also agrees with recent observations of ice compression at higher temperatures-in the 'no man's land' regime, between 145 and 200 kelvin, where kinetics are faster-resulting in crystalline phases7,8. Here we further probe the role of kinetics and show that, if carried out slowly, compression of ice I even at 100 kelvin (a region in which HDA typically forms) gives proton-ordered, but non-interpenetrating, ice IX', then proton-ordered and interpenetrating ice XV', and finally ice VIII'. By contrast, fast compression yields HDA but no ice IX, and direct transformation of ice I to ice XV' is structurally inhibited. These observations suggest that HDA formation is a consequence of a kinetically arrested transformation between low-density ice I and high-density ice XV' and challenge theories that connect amorphous ice to supercooled liquid water.

2.
J Am Chem Soc ; 146(2): 1710-1721, 2024 Jan 17.
Artigo em Inglês | MEDLINE | ID: mdl-38175928

RESUMO

The influence of the microstructure on the ionic conductivity and cell performance is a topic of broad scientific interest in solid-state batteries. The current understanding is that interfacial decomposition reactions during cycling induce local strain at the interfaces between solid electrolytes and the anode/cathode, as well as within the electrode composites. Characterizing the effects of internal strain on ion transport is particularly important, given the significant local chemomechanical effects caused by volumetric changes of the active materials during cycling. Here, we show the effects of internal strain on the bulk ionic transport of the argyrodite Li6PS5Br. Internal strain is reproducibly induced by applying pressures with values up to 10 GPa. An internal permanent strain is observed in the material, indicating long-range strain fields typical for dislocations. With increasing dislocation densities, an increase in the lithium ionic conductivity can be observed that extends into improved ionic transport in solid-state battery electrode composites. This work shows the potential of strain engineering as an additional approach for tuning ion conductors without changing the composition of the material itself.

3.
Phys Chem Chem Phys ; 25(21): 14981-14991, 2023 May 31.
Artigo em Inglês | MEDLINE | ID: mdl-37211856

RESUMO

From crystalline tetrahydrofuran clathrate hydrate, THF-CH (THF·17H2O, cubic structure II), three distinct polyamorphs can be derived. First, THF-CH undergoes pressure-induced amorphization when pressurized to 1.3 GPa in the temperature range 77-140 K to a form which, in analogy to pure ice, may be called high-density amorphous (HDA). Second, HDA can be converted to a densified form, VHDA, upon heat-cycling at 1.8 GPa to 180 K. Decompression of VHDA to atmospheric pressure below 130 K produces the third form, recovered amorphous (RA). Results from neutron scattering experiments and molecular dynamics simulations provide a generalized picture of the structure of amorphous THF hydrates with respect to crystalline THF-CH and liquid THF·17H2O solution (∼2.5 M). Although fully amorphous, HDA is heterogeneous with two length scales for water-water correlations (less dense local water structure) and guest-water correlations (denser THF hydration structure). The hydration structure of THF is influenced by guest-host hydrogen bonding. THF molecules maintain a quasiregular array, reminiscent of the crystalline state, and their hydration structure (out to 5 Å) constitutes ∼23H2O. The local water structure in HDA is reminiscent of pure HDA-ice featuring 5-coordinated H2O. In VHDA, the hydration structure of HDA is maintained but the local water structure is densified and resembles pure VHDA-ice with 6-coordinated H2O. The hydration structure of THF in RA constitutes ∼18 H2O molecules and the water structure corresponds to a strictly 4-coordinated network, as in the liquid. Both VHDA and RA can be considered as homogeneous.

4.
Inorg Chem ; 60(8): 6004-6015, 2021 Apr 19.
Artigo em Inglês | MEDLINE | ID: mdl-33788545

RESUMO

The AMnO2 delafossites (A = Na, Cu) are model frustrated antiferromagnets, with triangular layers of Mn3+ spins. At low temperatures (TN = 65 K), a C2/m → P1̅ transition is found in CuMnO2, which breaks frustration and establishes magnetic order. In contrast to this clean transition, A = Na only shows short-range distortions at TN. Here, we report a systematic crystallographic, spectroscopic, and theoretical investigation of CuMnO2. We show that, even in stoichiometric samples, nonzero anisotropic Cu displacements coexist with magnetic order. Using X-ray/neutron diffraction and Raman scattering, we show that high pressures act to decouple these degrees of freedom. This manifests as an isostuctural phase transition at ∼10 GPa, with a reversible collapse of the c-axis. This is shown to be the high-pressure analogue of the c-axis negative thermal expansion seen at ambient pressure. Density functional theory (DFT) simulations confirm that dynamical instabilities of the Cu+ cations and edge-shared MnO6 layers are intertwined at ambient pressure. However, high pressure selectively activates the former, before an eventual predicted reemergence of magnetism at the highest pressures. Our results show that the lattice dynamics and local structure of CuMnO2 are quantitatively different from nonmagnetic Cu delafossites and raise questions about the role of intrinsic inhomogeneity in frustrated antiferromagnets.

5.
J Am Chem Soc ; 142(41): 17662-17669, 2020 Oct 14.
Artigo em Inglês | MEDLINE | ID: mdl-32900188

RESUMO

Solid-state topochemical polymerization (SSTP) is a promising method to construct functional crystalline polymeric materials, but in contrast to various reactions that happen in solution, only very limited types of SSTP reactions are reported. Diels-Alder (DA) and dehydro-DA (DDA) reactions are textbook reactions for preparing six-membered rings in solution but are scarcely seen in solid-state synthesis. Here, using multiple cutting-edge techniques, we demonstrate that the solid 1,4-diphenylbutadiyne (DPB) undergoes a DDA reaction under 10-20 GPa with the phenyl as the dienophile. The crystal structure at the critical pressure shows that this reaction is "distance-selected". The distance of 3.2 Å between the phenyl and the phenylethynyl facilitates the DDA reaction, while the distances for other DDA and 1,4-addition reactions are too large to allow the bonding. The obtained products are crystalline armchair graphitic nanoribbons, and hence our studies open a new route to construct the crystalline carbon materials with atomic-scale control.

6.
Inorg Chem ; 59(19): 13979-13987, 2020 Oct 05.
Artigo em Inglês | MEDLINE | ID: mdl-32946229

RESUMO

Several II-IV double-ReO3-type (DROT) fluorides are known to exhibit strong negative thermal expansion (NTE) over a wide temperature range while retaining a cubic structure down to 120 K or lower. CaZrF6, CaNbF6, CaTiF6, and MgZrF6, embody these properties. In contrast to the behavior of these II-IV materials, the I-V DROT material, NaSbF6, has been reported to display a phase transition from rhombohedral to cubic above 300 K and positive thermal expansion both above and below the transition. In this work, NaNbF6 and NaTaF6 are shown to undergo first-order cubic-to-rhombohedral transitions on cooling to ∼130 K. Above this transition, NaNbF6 shows modest NTE between 160 and 250 K, whereas NaTaF6 exhibits near-zero thermal expansion over the range 210-270 K. These I-V systems are elastically softer than their II-IV counterparts, with a zero pressure bulk modulus, K0, of 14.6(8) GPa and first derivative of the bulk modulus with respect to pressure, K0', of -18(3) for cubic NaNbF6, and K0 = 14.47(3) GPa and K0'= -21.56(7) for cubic NaTaF6. When subject to ∼0.3 GPa at 300 K, both compounds exhibit a phase transition from Fm3̅m to R3̅. The R3̅ phases exhibit negative linear compressibility over a limited pressure range. A further transition with phase coexistence occurs at ∼2.5-3.0 GPa for NaNbF6 and ∼4.5 GPa for NaTaF6. Compression of NaNbF6 in helium at room temperature and below provides no evidence for helium penetration into the structure to form a perovskite with helium on the A-site, as was previously reported for CaZrF6.

7.
J Am Chem Soc ; 139(38): 13284-13287, 2017 09 27.
Artigo em Inglês | MEDLINE | ID: mdl-28892378

RESUMO

Defect perovskites (He2-x□x)(CaZr)F6 can be prepared by inserting helium into CaZrF6 at high pressure. They can be recovered to ambient pressure at low temperature. There are no prior examples of perovskites with noble gases on the A-sites. The insertion of helium gas into CaZrF6 both elastically stiffens the material and reduces the magnitude of its negative thermal expansion. It also suppresses the onset of structural disorder, which is seen on compression in other media. Measurements of the gas released on warming to room temperature and Rietveld analyses of neutron diffraction data at low temperature indicate that exposure to helium gas at 500 MPa leads to a stoichiometry close to (He1□1)(CaZr)F6. Helium has a much higher solubility in CaZrF6 than silica glass or crystobalite. An analogue with composition (H2)2(CaZr)F6 would have a volumetric hydrogen storage capacity greater than current US DOE targets. We anticipate that other hybrid perovskites with small neutral molecules on the A-site can also be prepared and that they will display a rich structural chemistry.

8.
J Am Chem Soc ; 139(45): 16343-16349, 2017 11 15.
Artigo em Inglês | MEDLINE | ID: mdl-29040804

RESUMO

Synthesis of well-ordered reduced dimensional carbon solids with extended bonding remains a challenge. For example, few single-crystal organic monomers react under topochemical control to produce single-crystal extended solids. We report a mechanochemical synthesis in which slow compression at room temperature under uniaxial stress can convert polycrystalline or single-crystal benzene monomer into single-crystalline packings of carbon nanothreads, a one-dimensional sp3 carbon nanomaterial. The long-range order over hundreds of microns of these crystals allows them to readily exfoliate into fibers. The mechanochemical reaction produces macroscopic single crystals despite large dimensional changes caused by the formation of multiple strong, covalent C-C bonds to each monomer and a lack of reactant single-crystal order. Therefore, it appears not to follow a topochemical pathway, but rather one guided by uniaxial stress, to which the nanothreads consistently align. Slow-compression room-temperature synthesis may allow diverse molecular monomers to form single-crystalline packings of polymers, threads, and higher dimensional carbon networks.

9.
Angew Chem Int Ed Engl ; 56(23): 6553-6557, 2017 06 01.
Artigo em Inglês | MEDLINE | ID: mdl-28464355

RESUMO

Geometric isomerism in polyacetylene is a basic concept in chemistry textbooks. Polymerization to cis-isomer is kinetically preferred at low temperature, not only in the classic catalytic reaction in solution but also, unexpectedly, in the crystalline phase when it is driven by external pressure without a catalyst. Until now, no perfect reaction route has been proposed for this pressure-induced polymerization. Using in situ neutron diffraction and meta-dynamic simulation, we discovered that under high pressure, acetylene molecules react along a specific crystallographic direction that is perpendicular to those previously proposed. Following this route produces a pure cis-isomer and more surprisingly, predicts that graphane is the final product. Experimentally, polycyclic polymers with a layered structure were identified in the recovered product by solid-state nuclear magnetic resonance and neutron pair distribution functions, which indicates the possibility of synthesizing graphane under high pressure.

10.
Proc Natl Acad Sci U S A ; 110(26): 10552-6, 2013 Jun 25.
Artigo em Inglês | MEDLINE | ID: mdl-23757495

RESUMO

The motif of distinct H2O molecules in H-bonded networks is believed to persist up to the densest molecular phase of ice. At even higher pressures, where the molecule dissociates, it is generally assumed that the proton remains localized within these same networks. We report neutron-diffraction measurements on D2O that reveal the location of the D atoms directly up to 52 GPa, a pressure regime not previously accessible to this technique. The data show the onset of a structural change at ∼13 GPa and cannot be described by the conventional network structure of ice VII above ∼26 GPa. Our measurements are consistent with substantial deuteron density in the octahedral, interstitial voids of the oxygen lattice. The observation of this "interstitial" ice VII form provides a framework for understanding the evolution of hydrogen bonding in ice that contrasts with the conventional picture. It may also be a precursor for the superionic phase reported at even higher pressure with important consequences for our understanding of dense matter and planetary interiors.

11.
Angew Chem Int Ed Engl ; 55(39): 12040-4, 2016 09 19.
Artigo em Inglês | MEDLINE | ID: mdl-27561179

RESUMO

Acetonitrile (CH3 CN) is the simplest and one of the most stable nitriles. Reactions usually occur on the C≡N triple bond, while the C-H bond is very inert and can only be activated by a very strong base or a metal catalyst. It is demonstrated that C-H bonds can be activated by the cyano group under high pressure, but at room temperature. The hydrogen atom transfers from the CH3 to CN along the CH⋅⋅⋅N hydrogen bond, which produces an amino group and initiates polymerization to form a dimer, 1D chain, and 2D nanoribbon with mixed sp(2) and sp(3) bonded carbon. Finally, it transforms into a graphitic polymer by eliminating ammonia. This study shows that applying pressure can induce a distinctive reaction which is guided by the structure of the molecular crystal. It highlights the fact that very inert C-H can be activated by high pressure, even at room temperature and without a catalyst.

12.
J Phys Chem C Nanomater Interfaces ; 128(26): 11006-11013, 2024 Jul 04.
Artigo em Inglês | MEDLINE | ID: mdl-38983596

RESUMO

The defect double perovskite [He2-x □ x ][CaNb]F6, with helium on its A-site, can be prepared by the insertion of helium into ReO3-type CaNbF6 at high pressure. Upon cooling from 300 to 100 K under 0.4 GPa helium, ∼60% of the A-sites become occupied. Helium uptake was quantified by both neutron powder diffraction and gas insertion and release measurements. After the conversion of gauge pressure to fugacity, the uptake of helium by CaNbF6 can be described by a Langmuir isotherm. The enthalpy of absorption for helium in [He2-x □ x ][CaNb]F6 is estimated to be ∼+3(1) kJ mol-1, implying that its formation is entropically favored. Helium is able to diffuse through the material on a time scale of minutes at temperatures down to ∼150 K but is trapped at 100 K and below. The insertion of helium into CaNbF6 reduces the magnitude of its negative thermal expansion, increases the bulk modulus, and modifies its phase behavior. On compressing pristine CaNbF6, at 50 and 100 K, a cubic (Fm3̅m) to rhombohedral (R3̅) phase transition was observed at <0.20 GPa. However, a helium-containing sample remained cubic at 0.4 GPa and 50 K. CaNbF6, compressed in helium at room temperature, remained cubic to >3.7 GPa, the limit of our X-ray diffraction measurements, in contrast to prior reports that upon compression in a nonpenetrating medium, a phase transition is detected at ∼0.4 GPa.

13.
Rev Sci Instrum ; 92(9): 093903, 2021 Sep 01.
Artigo em Inglês | MEDLINE | ID: mdl-34598490

RESUMO

A design for an incident-beam collimator for the Paris-Edinburgh pressure cell is described here. This design can be fabricated from reaction-bonded B4C but also through fast turnaround, inexpensive 3D-printing. 3D-printing thereby also offers the opportunity of composite collimators whereby the tip closest to the sample can exhibit even better neutronic characteristics. Here, we characterize four such collimators: one from reaction-bonded B4C, one 3D-printed and fully infiltrated with cyanoacrylate, a glue, one with a glue-free tip, and one with a tip made from enriched 10B4C. The collimators are evaluated on the Spallation Neutrons and Pressure Diffractometer of the Spallation Neutron Source and the Wide-Angle Neutron Diffractometer at the High Flux Isotope Reactor, both at Oak Ridge National Laboratory. This work clearly shows that 3D-printed collimators perform well and also that composite collimators improve performance even further. Beyond use in the Paris-Edinburgh cell, these findings also open new avenues for collimator designs as clearly more complex shapes are possible through 3D printing. An example of such is shown here with a collimator made for single-crystal samples measured inside a diamond anvil cell. These developments are expected to be highly advantageous for future experimentation in high pressure and other extreme environments and even for the design and deployment of new neutron scattering instruments.

14.
Adv Mater ; 31(23): e1807334, 2019 Jun.
Artigo em Inglês | MEDLINE | ID: mdl-30985035

RESUMO

The first experimental evidence for a giant, conventional barocaloric effect (BCE) associated with a pressure-driven spin crossover transition near room temperature is provided. Magnetometry, neutron scattering, and calorimetry are used to explore the pressure dependence of the SCO phase transition in polycrystalline samples of protonated and partially deuterated [FeL2 ][BF4 ]2 [L = 2,6-di(pyrazol-1-yl)pyridine] at applied pressures of up to 120 MPa (1200 bar). The data indicate that, for a pressure change of only 0-300 bar (0-30 MPa), an adiabatic temperature change of 3 K is observed at 262 K or 257 K in the protonated and deuterated materials, respectively. This BCE is equivalent to the magnetocaloric effect (MCE) observed in gadolinium in a magnetic field change of 0-1 Tesla. The work confirms recent predictions that giant, conventional BCEs will be found in a wide range of SCO compounds.

15.
Sci Rep ; 8(1): 15520, 2018 Oct 19.
Artigo em Inglês | MEDLINE | ID: mdl-30341340

RESUMO

At ambient pressure, the hydrogen bond in materials such as ice, hydrates, and hydrous minerals that compose the Earth and icy planets generally takes an asymmetric O-H···O configuration. Pressure significantly affects this configuration, and it is predicted to become symmetric, such that the hydrogen is centered between the two oxygen atoms at high pressure. Changes of physical properties of minerals relevant to this symmetrization have been found; however, the atomic configuration around this symmetrization has remained elusive so far. Here we observed the pressure response of the hydrogen bonds in the aluminous hydrous minerals δ-AlOOH and δ-AlOOD by means of a neutron diffraction experiment. We find that the transition from P21nm to Pnnm at 9.0 GPa, accompanied by a change in the axial ratios of δ-AlOOH, corresponds to the disorder of hydrogen bond between two equivalent sites across the center of the O···O line. Symmetrization of the hydrogen bond is observed at 18.1 GPa, which is considerably higher than the disorder pressure. Moreover, there is a significant isotope effect on hydrogen bond geometry and transition pressure. This study indicates that disorder of the hydrogen bond as a precursor of symmetrization may also play an important role in determining the physical properties of minerals such as bulk modulus and seismic wave velocities in the Earth's mantle.

16.
Rev Sci Instrum ; 89(9): 092902, 2018 Sep.
Artigo em Inglês | MEDLINE | ID: mdl-30278728

RESUMO

A diamond cell optimized for single-crystal neutron diffraction is described. It is adapted for work at several of the single-crystal diffractometers of the Spallation Neutron Source and the High Flux Isotope Reactor at the Oak Ridge National Laboratory (ORNL). A simple spring design improves portability across the facilities and affords load maintenance from offline pressurization and during temperature cycling. Compared to earlier prototypes, pressure stability of polycrystalline diamond (Versimax®) has been increased through double-conical designs and ease of use has been improved through changes to seat and piston setups. These anvils allow ∼30%-40% taller samples than possible with comparable single-crystal anvils. Hydrostaticity and the important absence of shear pressure gradients have been established with the use of glycerin as a pressure medium. Large single-crystal synthetic diamonds have also been used for the first time with such a clamp-diamond anvil cell for pressures close to 20 GPa. The cell is made from a copper beryllium alloy and sized to fit into ORNL's magnets for future ultra-low temperature and high-field studies. We show examples from the Spallation Neutron Source's SNAP and CORELLI beamlines and the High Flux Isotope Reactor's HB-3A and IMAGINE beamlines.

17.
J Phys Chem Lett ; 8(8): 1856-1864, 2017 Apr 20.
Artigo em Inglês | MEDLINE | ID: mdl-28395511

RESUMO

The enormous versatility in the properties of carbon materials depends on the content of the sp2 and sp3 covalent bonds. Under compression, if intermolecular distances cross a critical threshold, then unsaturated hydrocarbons gradually transform to saturated carbon polymers. However, the mechanism of polymerization, even for benzene, the simplest aromatic hydrocarbon, is still not understood. We used high-pressure synchrotron X-ray, neutron diffraction, and micro-Raman spectroscopy together with density functional calculations to investigate the isotope effects in benzene isotopologues C6H6 and C6D6 up to 46.0 GPa. Raman spectra of polymeric products recovered from comparable pressures show the progression of polymerization exhibiting a pronounced kinetic isotope effect. Kinetically retarded reactions in C6D6 shed light on the mechanism of polymerization of benzene. We find that C6D6-derived products recovered from P < 35 GPa actively react with moisture, forming polymers with higher sp3 hydrogen contents. Significant isotopic shift (≥7 GPa) in persistence of Bragg reflections of C6D6 is observed.

18.
Chem Sci ; 8(1): 298-304, 2017 Jan 01.
Artigo em Inglês | MEDLINE | ID: mdl-28616132

RESUMO

Transformation between different types of carbon-carbon bonding in carbides often results in a dramatic change of physical and chemical properties. Under external pressure, unsaturated carbon atoms form new covalent bonds regardless of the electrostatic repulsion. It was predicted that calcium acetylide (also known as calcium carbide, CaC2) polymerizes to form calcium polyacetylide, calcium polyacenide and calcium graphenide under high pressure. In this work, the phase transitions of CaC2 under external pressure were systematically investigated, and the amorphous phase was studied in detail for the first time. Polycarbide anions like C66- are identified with gas chromatography-mass spectrometry and several other techniques, which evidences the pressure induced polymerization of the acetylide anions and suggests the existence of the polyacenide fragment. Additionally, the process of polymerization is accompanied with a 107 fold enhancement of the electrical conductivity. The polymerization of acetylide anions demonstrates that high pressure compression is a viable route to synthesize novel metal polycarbides and materials with extended carbon networks, while shedding light on the synthesis of more complicated metal organics.

19.
Nat Commun ; 6: 8030, 2015 Aug 14.
Artigo em Inglês | MEDLINE | ID: mdl-26271453

RESUMO

Physical properties of lithium under extreme pressures continuously reveal unexpected features. These include a sequence of structural transitions to lower symmetry phases, metal-insulator-metal transition, superconductivity with one of the highest elemental transition temperatures, and a maximum followed by a minimum in its melting line. The instability of the bcc structure of lithium is well established by the presence of a temperature-driven martensitic phase transition. The boundaries of this phase, however, have not been previously explored above 3 GPa. All higher pressure phase boundaries are either extrapolations or inferred based on indirect evidence. Here we explore the pressure dependence of the martensitic transition of lithium up to 7 GPa using a combination of neutron and X-ray scattering. We find a rather unexpected deviation from the extrapolated boundaries of the hR3 phase of lithium. Furthermore, there is evidence that, above ∼3 GPa, once in fcc phase, lithium does not undergo a martensitic transition.

20.
Rev Sci Instrum ; 86(12): 125109, 2015 Dec.
Artigo em Inglês | MEDLINE | ID: mdl-26724075

RESUMO

High material penetration by neutrons allows for experiments using sophisticated sample environments providing complex conditions. Thus, neutron imaging holds potential for performing in situ nondestructive measurements on large samples or even full technological systems, which are not possible with any other technique. This paper presents a new sample environment for in situ high resolution neutron imaging experiments at temperatures from room temperature up to 1100 °C and/or using controllable flow of reactive atmospheres. The design also offers the possibility to directly combine imaging with diffraction measurements. Design, special features, and specification of the furnace are described. In addition, examples of experiments successfully performed at various neutron facilities with the furnace, as well as examples of possible applications are presented. This covers a broad field of research from fundamental to technological investigations of various types of materials and components.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA