Scintillation Properties of CsPbBr3 Nanocrystals Prepared by Ligand-Assisted Reprecipitation and Dual Effect of Polyacrylate Encapsulation toward Scalable Ultrafast Radiation Detectors.

Lead halide perovskite nanocrystals (LHP-NCs) embedded in polymeric hosts are gaining attention as scalable and low-cost scintillation detectors for technologically relevant applications. Despite rapid progress, little is currently known about the scintillation properties and stability of LHP-NCs prepared by the ligand assisted reprecipitation (LARP) method, which allows mass scalability at room temperature unmatched by any other type of nanostructure, and the implications of incorporating LHP-NCs into polyacrylate hosts are still largely debated. Here, we show that LARP-synthesized CsPbBr3 NCs are comparable to particles from hot-injection routes and unravel the dual effect of polyacrylate incorporation, where the partial degradation of LHP-NCs luminescence is counterbalanced by the passivation of electron-poor defects by the host acrylic groups. Experiments on NCs with tailored surface defects show that the balance between such antithetical effects of polymer embedding is determined by the surface defect density of the NCs and provide guidelines for further material optimization.

On the Origin of the Light Yield Enhancement in Polymeric Composite Scintillators Loaded with Dense Nanoparticles.

Fast emitting polymeric scintillators are requested in advanced applications where high speed detectors with a large signal-to-noise ratio are needed. However, their low density implies a weak stopping power of high energy radiation and thus a limited light output and sensitivity. To enhance their performance, polymeric scintillators can be loaded with dense nanoparticles (NPs). We investigate the properties of a series of polymeric scintillators by means of photoluminescence and scintillation spectroscopy, comparing standard scintillators with a composite system loaded with dense hafnium dioxide (HfO2) NPs. The nanocomposite shows a scintillation yield enhancement of +100% with an unchanged time response. We provide for the first time an interpretation of this effect, pointing out the local effect of NPs in the generation of emissive states upon interaction with ionizing radiation. The obtained results indicate that coupling fast conjugated emitters with optically inert dense NPs could lead to surpassing the actual limits of pure polymeric scintillators.

Bypassing the statistical limit of singlet generation in sensitized upconversion using fluorinated conjugated systems.

The photon upconversion based on triplet-triplet annihilation (TTA) is a mechanism that converts the absorbed low-energy electromagnetic radiation into higher energy photons also at extremely low excitation intensities, but its use in actual technologies is still hindered by the limited availability of efficient annihilator moieties. We present here the results obtained by the synthesis and application of two new fluorinated chromophores based on phenazine and acridine structures, respectively. Both compounds show upconverted emission demonstrating their ability as TTA annihilator. More interesting, the acridine-based chromophore shows an excellent TTA yield that overcomes the one of some of best model systems. By correlating the experimental data and the quantum mechanical modeling of the investigated compound, we propose an alternative efficient pathway for the generation of the upconverted emissive states involving the peculiar high-energy triplet levels of the dye, thus suggesting a new development strategy for TTA annihilators based on the fine tuning of their high-energy excited states properties.

Design Principles of Hybrid Nanomaterials for Radiotherapy Enhanced by Photodynamic Therapy.

Radiation (RT) remains the most frequently used treatment against cancer. The main limitation of RT is its lack of specificity for cancer tissues and the limited maximum radiation dose that can be safely delivered without damaging the surrounding healthy tissues. A step forward in the development of better RT is achieved by coupling it with other treatments, such as photodynamic therapy (PDT). PDT is an anti-cancer therapy that relies on the light activation of non-toxic molecules-called photosensitizers-to generate ROS such as singlet oxygen. By conjugating photosensitizers to dense nanoscintillators in hybrid architectures, the PDT could be activated during RT, leading to cell death through an additional pathway with respect to the one activated by RT alone. Therefore, combining RT and PDT can lead to a synergistic enhancement of the overall efficacy of RT. However, the involvement of hybrids in combination with ionizing radiation is not trivial: the comprehension of the relationship among RT, scintillation emission of the nanoscintillator, and therapeutic effects of the locally excited photosensitizers is desirable to optimize the design of the hybrid nanoparticles for improved effects in radio-oncology. Here, we discuss the working principles of the PDT-activated RT methods, pointing out the guidelines for the development of effective coadjutants to be tested in clinics.

Photon upconversion in multicomponent systems: Role of back energy transfer.

Photon upconversion based on sensitized triplet-triplet annihilation in bi-component systems is a multistep process that involves a triplet-triplet energy transfer (ET) from a donor to an acceptor moiety. This is aimed at sensitizing the population of annihilating optically dark triplets that generates the high energy photoluminescence. A large resonance between the involved triplets is usually recommended because it increases the energy gain between absorbed and emitted upconverted photons. However, it also enables efficient back-ET from acceptor to donor triplets, with potential detrimental consequences on the system performance. Here, we analyze a model system, where the energy difference between donor and acceptor triplets is lower than kBT at room temperature by means of time resolved and steady state photoluminescence spectroscopy, and develop a kinetic model, which describes the iterative loop that transfers the triplet exciton between the donor and acceptor molecules. In such a way, we obtained the guidelines for the optimization of the system composition required to overcome the back-ET effect and maximize the upconversion quantum yield.

Triplet-triplet annihilation based photon up-conversion in hybrid molecule-semiconductor nanocrystal systems.

Photon up-conversion based on triplet-triplet annihilation (TTA) exploits the annihilation of optically dark triplets of an organic emitter to produce high-energy singlets that generate high energy emission. In recently proposed hybrid systems, the annihilating triplets are indirectly sensitized by light-harvesting semiconductor colloidal nanocrystals via energy transfer from their capping ligands (h-sTTA). Here, we discuss quantitatively the performance of the h-sTTA up-conversion mechanism in a reference nanocrystal/organic emitter pair, by introducing a kinetic model that points out the relationship between the up-conversion yield and the excitation intensity. This model highlights the fundamental properties of the employed moieties that mostly affect the conversion efficiency. We derive a new expression for the excitation threshold specific for h-sTTA up-conversion, which allows us to estimate a priori the material performances from a few key parameters and to point out the most severe bottlenecks. The obtained results demonstrate that the up-conversion yield is mainly limited by ultrafast non-radiative recombinations of the optical excitons created on nanocrystals, which are competitive to the sensitization channel for emitter triplets in solution. Our results suggest that the quenching partially arises from charge transfer interactions between nanocrystals and surface ligands. Improved ligand design and optimized surface functionalization strategies are required to avoid energy losses and enhance the up-conversion performance, thus promoting the application of h-sTTA up-conversion materials in solar technologies.

Cascade sensitization of triplet-triplet annihilation based photon upconversion at sub-solar irradiance.

In triplet-triplet annihilation based upconversion, high-energy photons are generated through the annihilation of fluorophore triplets, populated via energy transfer from a light-harvesting sensitizer. However, the absorption band of common sensitizers is narrow, limiting the fraction of recoverable photons. We overcome this issue using a third chromophore as an additional light-harvester in the transparency window between the upconverted luminescence and the sensitizer absorption. The third component transfers the extra-collected energy to sensitizers, realizing a cascade-sensitized upconversion that shows a 20% increment of the high-energy photon output and a conversion yield of 10% at solar irradiance.

Two-dimensional structural ordering in a chromophoric ionic liquid for triplet energy migration-based photon upconversion.

A novel chromophoric ionic liquid (IL) with two-dimensional (2D) nanostructural order is developed, and its structure-property relationship is investigated by harnessing photon upconversion based on triplet energy migration. An ion pair of 9,10-diphenylanthracene-2-sulphonate (DPAS) and asymmetric quaternary phosphonium ion exhibited both ionic crystal (IC) and supercooled IL phases at room temperature. Single crystal X-ray analysis of the IC phase showed an alternate alignment of polar (ionic) and non-polar (non-ionic) layers, and this layered structure was basically maintained even in the IL phase. The diffusion length of triplet excitons in the IL phase, obtained by the analysis of upconverted emission in succession to triplet-triplet annihilation (TTA), is larger than the domain size estimated from powder X-ray analysis. This suggests that triplet excitons in chromophoric ILs can diffuse over the nanostructured domains.

Bottom-up Synthesis and Self-Assembly of Copper Clusters into Permanent Excimer Supramolecular Nanostructures.

Metal clusters with appropriate molecular ligands have been shown to be suitable subnanometer building blocks for supramolecular architectures with controlled secondary interactions, providing access to physical regimes not achievable with conventional intermolecular motifs. An example is the excimer photophysics exhibited by individual cluster-based superstructures produced by top-down etching of gold nanoparticles. Now, a supramolecular architecture of copper clusters is presented with controlled optical properties and efficient non-resonant luminescence produced via a novel bottom-up synthesis using mild green reductants followed by a ligand exchange reaction and spontaneous supramolecular assembly. Spectroscopic experiments confirm the formation of the intercluster network and reveal the permanent nature of their excimer-like behavior, thus extending the potential impact and applicability of metal cluster superstructures as efficient and stable non-resonant single-particle emitters.

Donor-Acceptor Control in Grown-in-Glass Gallium Oxide Nanocrystals by Crystallization-driven Heterovalent Doping.

Incorporation of doping ions in nanocrystals is a strategy for providing nanophases with functions directly related to ion features. At the nanoscale, however, doping can also activate more complex effects mediated by perturbation of the nanophase size and structure. Here, we report a paradigmatic case in which we modify grown-in-glass γ-Ga2 O3 nanophases by nickel or titanium doping of the starting glass, so as to control the concentration of oxygen and gallium vacancies responsible for the light emission. Optical absorption and luminescence show that Ni2+ and Ti4+ ions enter into the nanophase, but differential scanning calorimetry and X-ray diffraction indicate that Ni and Ti also work as modifiers of nanocrystal growth. As a result, doping influences nanocrystal size and concentration, which in turn dictate the number of donors and acceptors per nanocrystal. Finally, the chain of effects turns out to control both the intensity and spectral distribution of the light emission.

Fast and long-range triplet exciton diffusion in metal-organic frameworks for photon upconversion at ultralow excitation power.

The conversion of low-energy light into photons of higher energy based on sensitized triplet-triplet annihilation upconversion (TTA-UC) has emerged as a promising wavelength-shifting methodology because it permits UC at excitation powers as low as the solar irradiance. However, its application has been significantly hampered by the slow diffusion of excited molecules in solid matrices. Here, we introduce metal-organic frameworks (MOFs) that promote TTA-UC by taking advantage of triplet exciton migration among fluorophores that are regularly aligned with spatially controlled chromophore orientations. We synthesized anthracene-containing MOFs with different molecular orientations, and the analysis of TTA-UC emission kinetics unveiled a high triplet diffusion rate with a micrometre-scale diffusion length. Surface modification of MOF nanocrystals with donor molecules and their encapsulation in glassy poly(methyl methacrylate) (PMMA) allowed the construction of molecular-diffusion-free solid-state upconverters, which lead to an unprecedented maximization of overall UC quantum yield at excitation powers comparable to or well below the solar irradiance.

Mineral-organic hybrid nanotubes as highly sensitive solid state optical chemical sensors.

Hybrid materials represent one of the strategies of materials science for accomplishing complex functionalities hardly encompassed by single-component systems. The critical step in this approach is the mixing and/or bonding between the two different components, which must preserve the original characteristics of the materials or give rise to new functionalities originating from a proper and controlled interaction between the two components. Here, we demonstrate the use of the ionic self-assembly approach for fabricating functional nanomaterials comprising an inorganic matrix constituted by synthetic geomimetic chrysotile nanotubes and an organic superficial layer of a free-base porphyrin. The resulting hybrid nanomaterial can be processed as colloidal solution and as thin solid film. In both phases, the hybrid shows a bright red fluorescence under UV-blue excitation at ca. 400 nm. This fluorescence exhibits decreasing intensity with decreasing pH, as a result of the porphyrin J-type aggregation strongly catalyzed by the mineral surface. Simultaneously, the aggregation induces a neat color change from red to green, serving as a fast direct visual test of pH variations. These results open the route for the utilization of bio-compatible and inert mineral nanomaterials with strong adsorbing properties as efficient and cost-effective solid state vectors for functional molecules.

Second-order photochemical upconversion in organic systems.

In order to extend the photon energy shift of sensitized upconversion processes based on triplet-triplet annihilation in multicomponent organic systems, we have demonstrated that it is possible to exploit a sequence of consecutive upconversion steps. We have therefore realized an all-optical device for double upconversion: a light blue-shift of more than 0.9 eV was obtained at an excitation irradiance of a few tens of milliwatts per square centimeter.

Sensitized Triplet-Triplet Annihilation in Nanostructured Polymeric Scintillators Allows for Pulse Shape Discrimination.

Scintillating materials emit light when exposed to ionizing radiation or particles and are used for the detection of nuclear threats, medical imaging, high-energy physics, and other usages. For some of these applications, it is vital to distinguish neutrons and charged particles from γ-rays. This is achievable by pulse shape discrimination (PSD), a time-gated technique, which exploits that the scintillation kinetics can depend on the nature of the incident radiation. However, it proves difficult to realize efficient PSD with plastic scintillators, which have several advantages over liquid or crystalline scintillating materials, including mechanical robustness and shapeability. It is shown here that sensitive and rapid PSD is possible with nanostructured polymer scintillators that consist of a solid polymer matrix and liquid nanodomains in which an organic dye capable of triplet-triplet annihilation (TTA) is dissolved. The liquid nature of the nanodomains renders TTA highly efficient so that delayed fluorescence can occur at low energy density. The nanostructured polymer scintillators allow discriminating α particles, neutrons, and γ-rays with a time response that is better than that of commercial scintillators. Exploiting that the liquid nanodomains can facilitate energy transfer processes otherwise difficult to realize in solid polymers, an auxiliary triplet sensitizer is incorporated. This approach further increases the scintillator's sensitivity toward α particles and neutrons and other high-energy processes where localized interactions are involved.

Energy Partitioning in Multicomponent Nanoscintillators for Enhanced Localized Radiotherapy.

Multicomponent nanomaterials consisting of dense scintillating particles functionalized by or embedding optically active conjugated photosensitizers (PSs) for cytotoxic reactive oxygen species (ROS) have been proposed in the last decade as coadjuvant agents for radiotherapy of cancer. They have been designed to make scintillation-activated sensitizers for ROS production in an aqueous environment under exposure to ionizing radiations. However, a detailed understanding of the global energy partitioning process occurring during the scintillation is still missing, in particular regarding the role of the non-radiative energy transfer between the nanoscintillator and the conjugated moieties which is usually considered crucial for the activation of PSs and therefore pivotal to enhance the therapeutic effect. We investigate this mechanism in a series of PS-functionalized scintillating nanotubes where the non-radiative energy transfer yield has been tuned by control of the intermolecular distance between the nanotube and the conjugated system. The obtained results indicate that non-radiative energy transfer has a negligible effect on the ROS sensitization efficiency, thus opening the way to the development of different architectures for breakthrough radiotherapy coadjutants to be tested in clinics.

Light-accelerated depolymerization catalyzed by Eosin Y.

Retrieving the starting monomers from polymers synthesized by reversible deactivation radical polymerization has recently emerged as an efficient way to increase the recyclability of such materials and potentially enable their industrial implementation. To date, most methods have primarily focused on utilizing high temperatures (typically from 120 °C to 180 °C) to trigger an efficient depolymerization reaction. In this work, we show that, in the presence of Eosin Y under light irradiation, a much faster depolymerization of polymers made by reversible addition-fragmentation chain-transfer (RAFT) polymerization can be triggered even at a lower temperature (i.e. 100 °C). For instance, green light, in conjunction with ppm amounts of Eosin Y, resulted in the accelerated depolymerization of poly(methyl methacrylate) from 16% (thermal depolymerization at 100 °C) to 37% within 1 hour, and finally 80% depolymerization after 8 hours, as confirmed by both 1H-NMR and SEC analyses. The enhanced depolymerization rate was attributed to the activation of a macroCTA by Eosin Y, thus resulting in a faster macroradical generation. Notably, this method was found to be compatible with different wavelengths (e.g. blue, red and white light irradiation), solvents, and RAFT agents, thus highlighting the potential of light to significantly improve current depolymerization approaches.

Noninvasive Treatment of Alzheimer's Disease with Scintillating Nanotubes.

Effective and accessible treatments for Alzheimer's disease (AD) are urgently needed. Soluble Aß oligomers are identified as neurotoxic species in AD and targeted in antibody-based drug development to mitigate cognitive decline. However, controversy exists concerning their efficacy and safety. In this study, an alternative strategy is proposed to inhibit the formation of Aß oligomers by selectively oxidizing specific amino acids in the Aß sequence, thereby preventing its aggregation. Targeted oxidation is achieved using biocompatible and blood-brain barrier-permeable multicomponent nanoscintillators that generate singlet oxygen upon X-ray interaction. Surface-modified scintillators interact selectively with Aß and, upon X-ray irradiation, inhibit the formation of neurotoxic aggregates both in vitro and in vivo. Feeding transgenic Caenorhabditis elegans expressing human Aß with the nanoscintillators and subsequent irradiation with soft X-ray reduces Aß oligomer levels, extends lifespan, and restores memory and behavioral deficits. These findings support the potential of X-ray-based therapy for AD and warrant further development.

Low power, non-coherent sensitized photon up-conversion: modelling and perspectives.

In the last few years, non-coherent sensitized photon up-conversion (SUC) in multi-component systems has been developed to achieve significantly high quantum yields for various chromophore combinations at low excitation powers, spanning from the ultraviolet (UV) to near infrared (NIR) spectrum. This promising photon energy management technique became indeed suitable for wide applications in lighting technology and especially in photovoltaics, being able to recover the sub-bandgap photons lost by current devices. A full and general description of the SUC photophysics will be presented, with the analysis of the parameter affecting the photon conversion quantum yield and the quantities which define the optimal working range of any SUC system, namely the threshold and saturation excitation intensity. It will be shown how these quantities depend on intrinsic photophysical properties of the moieties involved and on the SUC solid host matrix. The model proposed represents a powerful tool for evaluation of a newly proposed system, and its reliability will be discussed in respect to an optimized system with SUC yield of 0.26 ± 0.02. The results obtained will outline the research guidelines which must be pursued to optimize the SUC efficiency for its perspective technological applications.

NIR emitting ytterbium chelates for colourless luminescent solar concentrators.

A new oxyiminopyrazole-based ytterbium chelate enables NIR emission upon UV excitation in colorless single layer luminescent solar concentrators for building integrated photovoltaics.