Muscle synergies for multidirectional isometric force generation during maintenance of upright standing posture.

Muscle synergies are defined as coordinated recruitment of groups of muscles with specific activation balances and time profiles aimed at generating task-specific motor commands. While muscle synergies in postural control have been investigated primarily in reactive balance conditions, the neuromechanical contribution of muscle synergies during voluntary control of upright standing is still unclear. In this study, muscle synergies were investigated during the generation of isometric force at the trunk during the maintenance of standing posture. Participants were asked to maintain the steady-state upright standing posture while pulling forces of different magnitudes were applied at the level at the waist in eight horizontal directions. Muscle synergies were extracted by nonnegative matrix factorization from sixteen lower limb and trunk muscles. An average of 5-6 muscle synergies were sufficient to account for a wide variety of EMG waveforms associated with changes in the magnitude and direction of pulling forces. A cluster analysis partitioned the muscle synergies of the participants into a large group of clusters according to their similarity, indicating the use of a subjective combination of muscles to generate a multidirectional force vector in standing. Furthermore, we found a participant-specific distribution in the values of cosine directional tuning parameters of synergy amplitude coefficients, suggesting the existence of individual neuromechanical strategies to stabilize the whole-body posture. Our findings provide a starting point for the development of novel diagnostic tools to assess muscle coordination in postural control and lay the foundation for potential applications of muscle synergies in rehabilitation.

Characterization of the in vivo transient responses of the femoral cartilage by means of quantitative ultrasound imaging techniques.

BACKGROUND: Quantitative ultrasound (QUS) techniques are new diagnostic tools able to identify changes in structural and material properties of the investigated tissue. For the first time, we evaluated the capability of QUS techniques in determining the in vivo transient changes in knee joint cartilage after a stressful task. METHODS: An ultrasound scanner collecting B-mode and radiofrequency data simultaneously was used to collect data from the femoral cartilage of the right knee in 15 participants. Cartilage thickness (CTK), ultrasound roughness index (URI), average magnitude ratio (AMR), and Nakagami parameters (NA) were evaluated before, immediately after and every 5 min up to 45 min a stressful task (30 min of running on a treadmill with a negative slope of 5%). RESULTS: CTK was affected by time (main effect: p < 0.001). Post hoc test showed significant differences with CTK at rest, which were observed up to 30 min after the run. AMR and NA were affected by time (p < 0.01 for both variables), while URI was unaffected by it. For AMR, post hoc test showed significant differences with rest values in the first 35 min of recovery, while NA was increased compared to rest values in all time points. CONCLUSION: Data suggest that a single running trial is not able to modify the integrity of the femoral cartilage, as reported by URI data. In vivo evaluation of QUS parameters of the femoral cartilage (NA, AMR, and URI) are able to characterize changes in cartilage properties over time.

The role of pennation angle and architectural gearing to rate of force development in dynamic and isometric muscle contractions.

BACKGROUND: Associations between muscle architecture and rate of force development (RFD) have been largely studied during fixed-end (isometric) contractions. Fixed-end contractions may, however, limit muscle shape changes and thus alter the relationship between muscle architecture an RFD. AIM: We compared the correlation between muscle architecture and architectural gearing and knee extensor RFD when assessed during dynamic versus fixed-end contractions. METHODS: Twenty-two recreationally active male runners performed dynamic knee extensions at constant acceleration (2000°s-2) and isometric contractions at a fixed knee joint angle (fixed-end contractions). Torque, RFD, vastus lateralis muscle thickness, and fascicle dynamics were compared during 0-75 and 75-150 ms after contraction onset. RESULTS: Resting fascicle angle was moderately and positively correlated with RFD during fixed-end contractions (r = 0.42 and 0.46 from 0-75 and 75-150 ms, respectively; p < 0.05), while more strongly (p < 0.05) correlated with RFD during dynamic contractions (r = 0.69 and 0.73 at 0-75 and 75-150 ms, respectively; p < 0.05). Resting fascicle angle was (very) strongly correlated with architectural gearing (r = 0.51 and 0.73 at 0-75 ms and 0.50 and 0.70 at 75-150 ms; p < 0.05), with gearing in turn also being moderately to strongly correlated with RFD in both contraction conditions (r = 0.38-0.68). CONCLUSION: Resting fascicle angle was positively correlated with RFD, with a stronger relationship observed in dynamic than isometric contraction conditions. The stronger relationships observed during dynamic muscle actions likely result from different restrictions on the acute changes in muscle shape and architectural gearing imposed by isometric versus dynamic muscle contractions.

Effects of minute oscillation stretching training on muscle and tendon stiffness and walking capability in people with type 2 diabetes.

AIM: we investigated the effects of a 10 week training program (i.e., minute oscillatory stretching; MOS) on the mechanical responses and walking capability in people with type 2 diabetes (T2D). METHODS: seventeen T2D patients performed maximum voluntary contractions of the plantar flexor muscles during which Achilles tendon stiffness (kT) and muscle-tendon stiffness (kM) were evaluated at different percentages of the maximum voluntary force (MVC). In addition, each participant was requested to walk at different walking speeds (i.e. 2, 3, 4, 5, and 6 kmh-1) while their net energy cost of walking (Cnet), cumulative EMG activity per distance travelled (CMAPD) and kinematic parameters (step length, step frequency, the ankle/knee range of motion) were evaluated. RESULTS: maximum tendon elongation increased after MOS training, and kT significantly decreased (between 0 and 20% of MVC). No differences were observed for muscle elongation or kM after training. Cnet decreased after training (at the slowest tested speeds) while no changes in CMAPD were observed. Step length and ankle ROM during walking increased after training at the slowest tested speeds, while step frequency decreased; no significant effects were observed for knee ROM. CONCLUSION: these results indicate the effectiveness of 10 weeks of MOS training in reducing tendon stiffness and the energy cost during walking in people with T2D. This training protocol requires no specific instrumentation, can be easily performed at home, and has a high adherence (92 ± 9%). It could, thus, be useful to mitigate mechanical tendon deterioration and improve physical behaviour in this population.

Impairments in muscle shape changes affect metabolic demands during in-vivo contractions.

The uncoupling behaviour between muscle belly and fascicle shortening velocity (i.e. belly gearing), affects mechanical output by allowing the muscle to circumvent the limits imposed by the fascicles' force-velocity relationship. However, little is known about the 'metabolic effect' of a decrease/increase in belly gearing. In this study, we manipulated the plantar flexor muscles' capacity to change in shape (and hence belly gearing) by using compressive multidirectional loads. Metabolic, kinetic, electromyography activity and ultrasound data (in soleus and gastrocnemius medialis) were recorded during cyclic fixed-end contractions of the plantar flexor muscles in three different conditions: no load, +5 kg and +10 kg of compression. No differences were observed in mechanical power and electrophysiological variables as a function of compression intensity, whereas metabolic power increased as a function of it. At each compression intensity, differences in efficiency were observed when calculated based on fascicle or muscle behaviour and significant positive correlations (R2 range: 0.7-0.8 and p > 0.001) were observed between delta efficiency (ΔEff: Effmus-Efffas) and belly gearing (Vmus/Vfas) or ΔV (Vmus-Vfas). Thus, changes in the muscles' capacity to change in shape (e.g. in muscle stiffness or owing to compressive garments) affect the metabolic demands and the efficiency of muscle contraction.

The interplay between gastrocnemius medialis force-length and force-velocity potentials, cumulative EMG activity and energy cost at speeds above and below the walk to run transition speed.

NEW FINDINGS: What is the central question of the study? Are the changes in force potentials (at the muscle level) related with metabolic changes at speeds above and below the walk-to-run transition? What is the main finding and its importance? The force-length and force-velocity potentials of gastrocnemius medialis during human walking decrease as a function of speed; this decrease is associated with an increase in cumulative EMG activity and in the energy cost of locomotion. Switching from fast walking to running is associated to an increase in the force potentials, supporting the idea that the 'metabolic trigger' that determines the transition from walking to running is ultimately driven by a reduction of the muscle's contractile capacity. ABSTRACT: The aim of this study was to investigate the interplay between the force-length (F-L) and force-velocity (F-V) potentials of gastrocnemius medialis (GM) muscle fascicles, the cumulative muscle activity per distance travelled (CMAPD) of the lower limb muscles (GM, vastus lateralis, biceps femori, tibialis anterior) and net energy cost (Cnet ) during walking and running at speeds above and below the walk-to-run transition speed (walking: 2-8 km h-1 ; running: 6-10 km h-1 ). A strong association was observed between Cnet and CMAPD: both changed significantly with walking speed but were unaffected by speed in running. The F-L and F-V potentials decreased with speed in both gaits and, at 6-8 km h-1 , were significantly larger in running. At low to moderate walking speeds (2-6 km h-1 ), the changes in GM force potentials were not associated with substantial changes in CMAPD (and Cnet ), whereas at walking speeds of 7-8 km h-1 , even small changes in force potentials were associated with steep increases in CMAPD (and Cnet ). These data suggest that: (i) the walk to run transition could be explained by an abrupt increase in Cnet driven by an upregulation of the EMG activity (e.g., in CMAPD) at sustained walking speeds (>7 km h-1 ) and (ii) the reduction in the muscle's ability to produce force (e.g., in the F-L and F-V potentials) contributes to the increase in CMAPD (and Cnet ). Switching to running allows regaining of high force potentials, thus limiting the increase in CMAPD (and Cnet ) that would otherwise occur to sustain the increase in locomotion speed.

Regional muscle features and their association with knee extensors force production at a single joint angle.

This study aimed (i) to investigate the role of regional characteristics of the knee extensors muscles (vastus lateralis: VL, vastus intermedius: VI and rectus femoris: RF) in determining maximum-voluntary force (MVF); and (ii) to understand which regional parameter of muscle structure would best predict MVF. Muscle architecture (e.g., pennation angle and fascicle length), muscle volume (Vol), anatomical (ACSA) and physiological cross-sectional-area (PCSA) were measured in the proximal (0-33% of the muscle length), middle (33-66% of the muscle length) and distal (66-100% of the muscle length) portions of each muscle in fifteen healthy males using ultrasound and Magnetic Resonance Imaging (MRI). Knee extensors force was calculated in isometric condition at a single knee joint angle of 90 degrees. Regional ACSA, Vol and PCSA were correlated with MVF production. Regional muscle geometry showed no significant correlations with MVF. Among regions, the middle portion of each muscle was largely correlated with MVF compared to all the other regions (distal and proximal). To understand which regional structural parameter best predicted MVF, a stepwise multiple linear regression was performed. This model showed a significant explanatory power (P < 0.001, R2 = 0.76, adjusted R2 = 0.71), including muscle Vol collected in the mid portions of VL and RF. Even if no significant differences were reported between Vol, PCSA and ACSA in determining MVF, our results showed that the RF and VL volume collected in the middle portion of the muscle length are strong determinants of MVF produced by the knee extensors at 90 degrees joint angle.

Energetics (and Mechanical Determinants) of Sprint and Shuttle Running.

Unsteady locomotion (e. g., sprints and shuttle runs) requires additional metabolic (and mechanical) energy compared to running at constant speed. In addition, sprints or shuttle runs with relevant speed changes (e. g., with large accelerations and/or decelerations) are typically short in duration and, thus, anaerobic energy sources must be taken into account when computing energy expenditure. In sprint running there is an additional problem due to the objective difficulty in separating the acceleration phase from a (necessary and subsequent) deceleration phase.In this review the studies that report data of energy expenditure during sprints and shuttles (estimated or actually calculated) will be summarized and compared. Furthermore, the (mechanical) determinants of metabolic energy expenditure will be discussed, with a focus on the analogies with and differences from the energetics/mechanics of constant-speed linear running.

Achilles tendon dimensions, ankle stiffness and footfall patterns in recreational runners.

The main purpose of this study was to investigate the relationship among Achilles tendon (AT) dimensions, ankle joint stiffness, and footfall patterns in recreational rearfoot and non-rearfoot runners. Based on the foot strike index, a total of 107 runners were divided into rearfoot (47 females/40 males) and non-rearfoot runners (14 females/6 males). All participants had theirs AT dimensions (AT length, AT thickness, and AT moment arm) measured using a combination of ultrasound and motion capture systems. In addition, all performed running trials measured at self-selected speed in laboratory-neutral shoes. A partial correlation coefficient was used for correlations between the selected variables. The results revealed a significant relationship between ankle joint stiffness and level of footfall pattern in rearfoot (r = 0.232, p = 0.032) and non-rearfoot runners (r = -0.811, p < 0.001). The results also suggest a relationship between AT thickness and foot strike index (r = -0.486) in non-rearfoot runners. Runners whose footfall pattern is closer to the heel have greater ankle joint stiffness. Non-rearfoot runners whose footfall pattern is closer to the toe have a thinner AT. Non-rearfoot runners with thicker AT had greater ankle joint stiffness.

Achilles tendon structure is associated with regular running volume and biomechanics.

Achilles tendinopathy was reported to have the highest incidence proportion of all running-related injuries. The purpose of this study was to analyse the association between the Achilles tendon structure and running activity status. 350 healthy participants (runners and inactive controls, 30-50 years) participated in this research. Each participant completed questionnaires: socioeconomic, psychological, physical activity habits, running status and history and VISA-A. Magnetic resonance imaging, anthropological, running biomechanics and 14 days of physical activity monitoring assessments were performed. There was a higher odd of being in the upper quartile of the Achilles tendon T2* relaxation time with higher maximal knee extension moment independent of age and sex. Compared with runners who ran 21-40 km per week, non-runners and those who ran more than 40 km per week had increased odds of having longest the Achilles tendon T2* relaxation time. Regular running of 21 to 40 km per week is related to the Achilles tendon T2* relaxation time indicating possibly better water content and collagen orientation in these runners with compare to inactive non-runners or highly active individuals. In addition, Achilles tendon T2* relaxation time as indirect indicator of the Achilles tendon structure was positively related to the maximal knee extension moment during running.

Running-Related Achilles Tendon Injury: A Prospective Biomechanical Study in Recreational Runners.

There are relatively few running studies that have attempted to prospectively identify biomechanical risk factors associated with Achilles tendon (AT) injuries. Therefore, the aim was to prospectively determine potential running biomechanical risk factors associated with the development of AT injuries in recreational, healthy runners. At study entry, 108 participants completed a set of questionnaires. They underwent an analysis of their running biomechanics at self-selected running speed. The incidence of AT running-related injuries (RRI) was assessed after 1-year using a weekly questionnaire standardized for RRI. Potential biomechanical risk factors for the development of AT RRI injury were identified using multivariable logistic regression. Of the 103 participants, 25% of the sample (15 males and 11 females) reported an AT RRI on the right lower limb during the 1-year evaluation period. A more flexed knee at initial contact (odds ratio = 1.146, P = .034) and at the midstance phase (odds ratio = 1.143, P = .037) were significant predictors for developing AT RRI. The results suggested that a 1-degree increase in knee flexion at initial contact and midstance was associated with a 15% increase in the risk of an AT RRI, thus causing a limitation of training or a stoppage of running in runners.

Influence of muscle-belly and tendon gearing on the energy cost of human walking.

This study combines metabolic and kinematic measurements at the whole-body level, with EMG and ultrasound measurements to investigate the influence of muscle-tendon mechanical behavior on the energy cost (Cnet ) of walking (from 2 to 8 km·h-1 ). Belly gearing (Gb = Δmuscle-belly length/Δfascicles length) and tendon gearing (Gt = ∆muscle-tendon unit length/∆muscle-belly length) of vastus lateralis (VL) and gastrocnemius medialis (GM) were calculated based on ultrasound data. Pendular energy recovery (%R) was calculated based on kinematic data, whereas the cumulative activity per distance travelled (CMAPD) was calculated for the VL, GM, tibialis anterior, and biceps femoris as the ratio between their EMG activity and walking speed. Finally, total CAMPD (CMAPDTOT ) was calculated as the sum of the CMAPD of all the investigate muscles. Cnet and CMAPDTOT showed a U-shaped behavior with a minimum at 4.2 and 4.1 km·h-1 , respectively; while %R, VL, and GM belly gearing showed an opposite trend, reaching a maximum (60% ± 5%, 1.1 ± 0.1 and 1.5 ± 0.1, respectively), between 4.7 and 5 km·h-1 . Gt was unaffected by speed in GM (3.5 ± 0.1) and decreased as a function of it in VL. A multiple stepwise linear regression indicated that %R has the greatest influence on Cnet, followed by CMAPDTOT and GM belly gearing. The role of Gb on Cnet could be attributed to its role in determining muscle work: when Gb increases, fascicles shortening decreases compared with that of the muscle-belly, thereby reducing the energy cost of contraction.

In vivo manipulation of muscle shape and tendinous stiffness affects the human ability to generate torque rapidly.

NEW FINDINGS: What is the central question of this study? What are the determinants of muscle belly gearing, and how does it affect the torque rise? What is the main finding and its importance? Change in muscle thickness of the gastrocnemius medialis is related to variations in belly gearing. Belly gearing has a key role in the rise of muscle torque and rate of torque development (RTD). Besides, the increase of tendinous tissue stiffness could increase the torque rise as well, and in turn, the RTD. However, changes in the tendinous tissue stiffness showed no effects on muscle fascicle behaviour, suggesting a possible uncoupling between muscle and tendon mechanical properties. ABSTRACT: During fixed-end contractions, muscles bulge in thickness and/or width to maintain a constant volume, whereas tendons lengthen over the entire contraction period. These dynamic changes play a key functional role in modulating the generated torque. However, the literature has revealed a limited understanding of in vivo dynamic muscle-tendon changes during rapid contractions. Therefore, this study aimed to investigate the determinants of belly gearing (belly velocity/fascicle velocity) and its effects on rapid torque production during in vivo fixed-end contractions. Twenty healthy males were recruited for the study. Muscle shape and tendon stiffness were manipulated by applying a transverse load (2-10 kg) and an ankle rotation manoeuvre, respectively. Ultrafast-ultrasound was employed to quantify medial gastrocnemius architecture during evoked contraction and a dynamometer was used to measure the muscle torque and quantify the rate of torque development (RTD). Torque and RTD diminished by transverse load application, whereas they increased during the ankle rotation manoeuvre. Belly gearing declined with increasing transverse load but was unaffected by tendinous stiffness variations. Alterations in belly gearing were strongly related to variations in muscle thickness throughout any load applied and affected the torque rise rapidly. In contrast, changes in tendinous tissue stiffness affected the torque rise only but did not modify the muscle shape. These data may suggest that concurrent manipulation of the tendinous tissue stiffness and muscle shape does not affect the explosive rise in torque capacity, suggesting a possible uncoupling between mechanical properties of muscle and tendon.

Mechanical work as a (key) determinant of energy cost in human locomotion: recent findings and future directions.

NEW FINDINGS: What is the topic of this review? This narrative review explores past and recent findings on the mechanical determinants of energy cost during human locomotion, obtained by using a mechanical approach based on König's theorem (Fenn's approach). What advances does it highlight? Developments in analytical methods and their applications allow a better understanding of the mechanical-bioenergetic interaction. Recent advances include the determination of 'frictional' internal work; the association between tendon work and apparent efficiency; a better understanding of the role of energy recovery and internal work in pathological gait (amputees, stroke and obesity); and a comprehensive analysis of human locomotion in (simulated) low gravity conditions. ABSTRACT: During locomotion, muscles use metabolic energy to produce mechanical work (in a more or less efficient way), and energetics and mechanics can be considered as two sides of the same coin, the latter being investigated to understand the former. A mechanical approach based on König's theorem (Fenn's approach) has proved to be a useful tool to elucidate the determinants of the energy cost of locomotion (e.g., the pendulum-like model of walking and the bouncing model of running) and has resulted in many advances in this field. During the past 60 years, this approach has been refined and applied to explore the determinants of energy cost and efficiency in a variety of conditions (e.g., low gravity, unsteady speed). This narrative review aims to summarize current knowledge of the role that mechanical work has played in our understanding of energy cost to date, and to underline how recent developments in analytical methods and their applications in specific locomotion modalities (on a gradient, at low gravity and in unsteady conditions) and in pathological gaits (asymmetric gait pathologies, obese subjects and in the elderly) could continue to push this understanding further. The recent in vivo quantification of new aspects that should be included in the assessment of mechanical work (e.g., frictional internal work and elastic contribution) deserves future research that would improve our knowledge of the mechanical-bioenergetic interaction during human locomotion, as well as in sport science and space exploration.

The influence of in vivo mechanical behaviour of the Achilles tendon on the mechanics, energetics and apparent efficiency of bouncing gaits.

In this study, we used kinematic, kinetic, metabolic and ultrasound analysis to investigate the role of elastic energy utilization on the mechanical and physiological demands of a movement task (hopping) that primarily involves the plantar-flexor muscles to determine the contribution of tendon work to total mechanical work and its relationship with apparent efficiency (AE) in bouncing gaits. Metabolic power (PMET) and (positive) mechanical power at the whole-body level (PMEC) were measured during hopping at different frequencies (2, 2.5, 3 and 3.5 Hz). The (positive) mechanical power produced during the Achilles tendon recoil phase (PTEN) was obtained by integrating ultrasound data with an inverse dynamic approach. As a function of hopping frequency, PMEC decreased steadily and PMET exhibited a U-shape behaviour, with a minimum at about 3 Hz. AE (PMEC/PMET) showed an opposite trend and was maximal (about 0.50) at the same frequency when PTEN was also highest. Positive correlations were observed: (i) between PTEN and AE (AE=0.22+0.15PTEN, R2=0.67, P<0.001) and the intercept of this relationship indicates the value of AE that should be expected when tendon work is nil; (ii) between AE and tendon gearing (Gt=Δmuscle-tendon unit length/Δmuscle belly length; R2=0.50, P<0.001), where a high Gt indicates that the muscle is contracting more isometrically, thus allowing the movement to be more economical (and efficient); (iii) between Gt and PTEN (R2=0.73, P<0.001), which indicates that Gt could play an important role in the tendon's capability to store and release mechanical power.

Gastrocnemius Medialis and Vastus Lateralis in vivo muscle-tendon behavior during running at increasing speeds.

This study combines in vivo ultrasound measurements of the Vastus Lateralis (VL) and Gastrocnemius Medialis (GM) muscles with electromyographic, kinematic, and kinetic measurements during treadmill running at different speeds (10, 13, and 16 km/h) to better understand the role of muscle and tendon behavior in two functionally different muscle-tendon units. In addition, the force-length and force-velocity relationships of VL and GM were experimentally assessed by combining dynamometry and EMG data with ultrasound measurements. With increasing running speed, the operating length of the fascicles in the stance phase shifted toward smaller lengths in the GM (P < .05; moving down the ascending limb of the F-L relationship) and longer lengths in the VL (P < .05; moving down the descending limb) at all speeds; however, both muscles contracted close to their optimal length L0 , where isometric force is maximal. Whereas the length of VL SEE did not change as a function of speed, GM SEE lengthened and shortened more at higher speeds. With increasing running speed, the contribution of elastic strain energy to the positive power generated by the MTU increased more for GM (from 0.75 to 1.56 W/kg) than for VL (from 0.62 to 1.02 W/kg). Notwithstanding these differences, these results indicate that, at increasing running speeds, both the VL and GM muscles produce high forces at low contraction velocities, and that the primary function of both muscle-tendon units is to enhance the storage and recovery of elastic strain energy.

The influence of Achilles tendon mechanical behaviour on "apparent" efficiency during running at different speeds.

PURPOSE: We investigated the role of elastic strain energy on the "apparent" efficiency of locomotion (AE), a parameter that is known to increase as a function of running speed (up to 0.5-0.7) well above the values of "pure" muscle efficiency (about 0.25-0.30). METHODS: In vivo ultrasound measurements of the gastrocnemius medialis (GM) muscle-tendon unit (MTU) were combined with kinematic, kinetic and metabolic measurements to investigate the possible influence of the Achilles tendon mechanical behaviour on the mechanics (total mechanical work, WTOT) and energetics (net energy cost, Cnet) of running at different speeds (10, 13 and 16 km h-1); AE was calculated as WTOT/Cnet. RESULTS: GM fascicles shortened during the entire stance phase, the more so the higher the speed, but the majority of the MTU displacement was accommodated by the Achilles tendon. Tendon strain and recoil increased as a function of running speed (P < 0.01 and P < 0.001, respectively). The contribution of elastic energy to the positive work generated by the MTU also increased with speed (from 0.09 to 0.16 J kg-1 m-1). Significant negative correlations (P < 0.01) were observed between tendon work and metabolic energy at each running speed (the higher the tendon work the lower the metabolic demand) and significant positive correlations were observed between tendon work and AE (P < 0.001) at each running speed (the higher the tendon work the higher the efficiency). CONCLUSION: These results support the notion that the dynamic function of tendons is integral in reducing energy expenditure and increasing the "apparent" efficiency of running.

Comprehensive mechanical power analysis in sprint running acceleration.

Sprint running is a common feature of many sport activities. The ability of an athlete to cover a distance in the shortest time relies on his/her power production. The aim of this study was to provide an exhaustive description of the mechanical determinants of power output in sprint running acceleration and to check whether a predictive equation for internal power designed for steady locomotion is applicable to sprint running acceleration. Eighteen subjects performed two 20 m sprints in a gym. A 35-camera motion capture system recorded the 3D motion of the body segments and the body center of mass (BCoM) trajectory was computed. The mechanical power to accelerate and rise BCoM (external power, Pext ) and to accelerate the segments with respect to BCoM (internal power, Pint ) was calculated. In a 20 m sprint, the power to accelerate the body forward accounts for 50% of total power; Pint accounts for 41% and the power to rise BCoM accounts for 9% of total power. All the components of total mechanical power increase linearly with mean sprint velocity. A published equation for Pint prediction in steady locomotion has been adapted (the compound factor q accounting for the limbs' inertia decreases as a function of the distance within the sprint, differently from steady locomotion) and is still able to predict experimental Pint in a 20 m sprint with a bias of 0.70 ± 0.93 W kg-1 . This equation can be used to include Pint also in other methods that estimate external horizontal power only.

Metabolic and kinematic responses while walking and running on a motorised and a curved non-motorised treadmill.

The purpose of this study was to assess metabolic and kinematic parameters (contact and flight time, step length and frequency) while walking at the preferred speed (1.44 ± 0.22 m · s-1) and while performing an incremental running test (up to exhaustion) on a motorised treadmill (MT) and on a curved non-motorised treadmill (CNMT). Twenty-five volunteers (24.1 ± 3.4 years; 64.7 ± 11.2 kg) participated in the study. Maximal running speed on MT was significantly larger (P < 0.001) than on CNMT (4.31 ± 0.50 vs. 3.75 ± 0.39 m · s-1) but no differences in heart rate or oxygen uptake (V˙O2) were observed at this speed. The energy cost of walking (Cw) and running (Cr) were significantly greater (P < 0.001) on CNMT than on MT (37 and 17%, respectively). No major differences in kinematic parameters were observed at paired, submaximal, running speeds (2.22-3.89 m · s-1) but V˙O2 was systematically larger in CNMT (of about 340 ml · min-1 · kg-1). This systematic difference can be expressed in terms of a larger "equivalent speed" on CNMT (of about 0.42 m · s-1) and should be attributed to factors other than the kinematic ones, such as the belt characteristics (e.g. friction, type of surface and curvature).

Sprint running: how changes in step frequency affect running mechanics and leg spring behaviour at maximal speed.

The purpose of this study was to investigate the changes in selected biomechanical variables in 80-m maximal sprint runs while imposing changes in step frequency (SF) and to investigate if these adaptations differ based on gender and training level. A total of 40 athletes (10 elite men and 10 women, 10 intermediate men and 10 women) participated in this study; they were requested to perform 5 trials at maximal running speed (RS): at the self-selected frequency (SFs) and at SF ±15% and ±30%SFs. Contact time (CT) and flight time (FT) as well as step length (SL) decreased with increasing SF, while kvert increased with it. At SFs, kleg was the lowest (a 20% decrease at ±30%SFs), while RS was the largest (a 12% decrease at ±30%SFs). Only small changes (1.5%) in maximal vertical force (Fmax) were observed as a function of SF, but maximum leg spring compression (ΔL) was largest at SFs and decreased by about 25% at ±30%SFs. Significant differences in Fmax, Δy, kleg and kvert were observed as a function of skill and gender (P < 0.001). Our results indicate that RS is optimised at SFs and that, while kvert follows the changes in SF, kleg is lowest at SFs.