A novel formula for estimating the vertical dimension of occlusion using panoramic radiography.

BACKGROUND: This study aimed to develop a new formula to easily estimate the vertical dimension of occlusion (VDO) by using the distance between the mental foramen on a panoramic radiograph. SUBJECTS AND METHODS: A total of 508 dentulous subjects were selected from outpatient dental clinics at the College of Dental Medicine, Al-Azhar University. The vertical dimension of the occlusion was measured using a single calibrated calliper. For each subject, a digital panoramic radiograph was taken with fixed exposure parameters. The intermental foramina distance (IMFD) was measured. The data were collected and then analysed using the IBM SPSS version 20.0 software package. (Armonk, NY: IBM Corp.). Linear regression was used to determine the relationship between the intermental foramina distance (IMFD) and the vertical dimension at occlusion (VDO). RESULTS: Pearson's correlation analysis revealed that there was a strong correlation between the intermental foramina distance (IMFD) and the VDO. Thus, a novel formula was developed for determining the VDO using panoramic radiography. CONCLUSION: The novel formula developed herein facilitated the determination of the VDO among prosthetic rehabilitation for subjects who lost vertical dimension due to loss of posterior teeth or severe wear of natural posterior teeth. Further studies are needed to determine the clinical applicability of the derived formulae for edentulous subjects.

Comparative evaluation of the effects of laser and chemical denture disinfectants on the surface characteristics of CAD-CAM and conventional denture resins: An in vitro experimental study.

PURPOSE: The purpose of this study was to assess the effect of Ga-Al-Ar diode, Nd:YAG lasers, and chemical disinfectants (NaOCl, vinegar, and Corega) on surface roughness (Ra) and hardness (VHN) of polymethylmethacrylate (PMMA), thermoplastic polyamide, milled and 3D-printed denture base resins. MATERIALS AND METHODS: About 432 specimens of PMMA, thermoplastic polyamide, milled, and 3D-printed resins were divided into six subgroups (n = 18): distilled water (control:C), Ga-Al-Ar diode laser (L1), Nd:YAG laser (L2), 1% sodium hypochlorite (NaOCl), vinegar (AA), and Corega (CR). Each specimen's Ra and VHN were measured. Surface topography assessment was done using scanning electron microscopy (SEM). Analysis was done using ANOVA and post hoc Tukey's test (p = 0.05). RESULTS: A significant difference was noted in Ra and VHN as affected by denture base materials, surface disinfectants, and their interaction (p < 0.001). Results showed a significant increase in Ra of PMMA with NaOCL (p < 0.001), AA (p = 0.005), and CR (p = 0.009), thermoplastic polyamide with L1 (p = 0.012), L2 (p = 0.015), NaOCL AA, and CR (p < 0.001 each), milled resin with AA NaOCL, and CR (p < 0.001 each), and 3D-printed resin with L1, NaOCl, AA (p < 0.001 each), and CR (p = 0.008). The VHN increased in PMMA with NaOCL (p < 0.001), AA (p = 0.044), and CR (p < 0.001), thermoplastic polyamide with L1 (p = 0.037), milled resin with L1, L2, and CR (p < 0.001 each), and 3D-printed resin with L1, NaOCl (p < 0.001 each), and decreased with CR (p = 0.007). CONCLUSION: The tested properties showed variations affected by denture base material and surface disinfectants. Laser treatments induced smoother surfaces than chemical disinfectants. Laser improved the surface hardness of CAD-CAM resins, while chemical immersion improved that of PMMA.

Perceived and real barriers to workplace empowerment among women at Saudi universities: A cross-sectional study.

Academic women in the Arab world, especially Saudi women, have numerous barriers inhibiting their leadership power at the workplace. The current study explores the perceived and real barriers to workplace empowerment among women at Saudi universities. A descriptive cross-sectional study was carried out at 15 Saudi governmental universities. A multistage cluster sampling technique was followed to select (5587 participants) The data collection started from the beginning of April to the beginning of September 2020. SPSS 23.0 was used to analyze data using descriptive statistics. Multiple linear regression was used to identify the real barriers to women empowerment at the workplace. The study showed that 52.1% of the study participants had moderate workplace empowerment, and only 10.2% have a low level. Regarding perceived barriers to workplace empowerment, 42.6% of the participants agree that male dominance was a barrier. Moreover, 36.2% of the participants agreed and strongly agree that the customs and traditions are a barrier to women empowerment at the workplace. Multiple linear regression showed that age, followed by years of experience (p <0.000), were the most significant demographic predictors of women empowerment at the workplace. Moreover, positive attitude, high self-esteem, and good knowledge (p <0.000) were considered other variables that positively predict women's empowerment at the workplace. The experience of gender-based violence (p <0.000) was a negative predictor of women empowerment at the workplace. The study concluded that around 62.3% of Saudi female academics and administrative staff have moderate or low workplace empowerment at Saudi Universities. Male dominance is perceived as the highest barrier.

Comparison between Reirradiation by Stereotactic Body Radiation Therapy and Moderately Hypofractionated Radiotherapy in Combination with Temozolomide for Treatment of Recurrent High Grade Glioma.

OBJECTIVE: High grade glioma (HGG) is considered a lethal disease with a high recurrence rate. There is no standard of care in recurrent HGG. Many treatment options are present, such as resurgery, systemic therapy, and re-irradiation. Re-irradiation seems to be a promising option. In this study, we aimed at comparing the efficacy and toxicity of two re-irradiation protocols. METHODS: Forty patients with recurrent HGG were randomized equally into two arms. Arm A received 30 Gy/10f/2w, and arm B received stereotactic body radiotherapy (SBRT) 30 Gy/5f/1w. Concurrent temozolamide (TMZ) was given in both arms. Median progression free survival (PFS) and overall survival (OS) were calculated, and brain MRI was done after 2 months of radiotherapy and then every 2 months, with documented toxicity using the Common Terminology of Adverse Events version 5 (CTCAE). RESULTS: The median follow-up time after the re-irradiation course was 11 months (range 8-15 months). The median PFS after recurrence was 6.4 months (95% CI 5.3-7.4), the median OS after recurrence was 8.6 months (95% CI 7.5-8.7), and the median total OS form date of diagnosis was 18.5 months (95% CI 17.3-19.8) among the included patients. There was a statistically significant difference in PFS favoring arm B, with a median PFS of 7.3 versus 6.2 months in arm A, with p values of 0.004. There was no statistically significant difference in in median OS (9.3 months in arm B versus 8.4 months in arm A) with p values of 0.088. All patients tolerated their treatment well, and acute and subacute G1-G2 toxicity, consisting of headache, malaise, and nausea, were recorded during and shortly after the end of the re-irradiation course. CONCLUSION: Re-irradiation in recurrent HGG by both protocols is safe and effective, with a significant improvement in PFS in SBRT arm but no significant improvement in OS.

Microbial Adhesion to Different Thermoplastic Denture Base Materials in Kennedy Class I Partially Edentulous Patients.

Introduction Since the polished and fitting surface of the denture base may promote the colonization of microorganisms, it is essential to know how the different types of denture bases prevent or encourage the adhesion of microorganisms. This study aimed to compare the microbial adhesion to the polished and fitting surfaces of thermoplastic nylon, thermoplastic acetal, and thermoplastic acrylic denture bases in Kennedy Class Ⅰ, partially edentulous patients. Materials and methods Thirteen patients were included in the study. The group consisted of eight males (61.54%) and five females (38.46%), with an age range of 41-50 years (mean age 46.1 years). Three types (groups) of removable partial dentures will be made for each patient using different thermoplastic denture base materials: thermoplastic nylon; thermoplastic acetal; and thermoplastic acrylic. The polished and fitting surfaces of the denture bases were swabbed after a one-month follow-up period. Microbial adhesion was evaluated by counting the microorganisms' colony-forming units (CFU) in the collected specimens. The data were collected and statistically analyzed. Results The study revealed no statistically significant difference in microbial adhesion to both polished and fitting surfaces between all types of studied thermoplastic denture base materials. However, the results showed that for the polished surface, the microbial adhesion median of thermoplastic acrylic denture base (40.5 CC x 102/ml) was higher than that of thermoplastic acetal (29.0 CC x 102/ml) and thermoplastic nylon (16.0 CC x 102/ml). Regarding the fitting surface, the microbial adhesion median of thermoplastic acrylic (51.0 CC x 102/ml) is higher than that of thermoplastic acetal (41.0 CC x 102/ml) and thermoplastic nylon (23.0 CC x 102/ml). Conclusion The thermoplastic nylon denture base materials showed less microbial adhesion among the studied thermoplastic materials, so it may be recommended to be used as a denture base material for individuals at high risk of denture stomatitis.

Comparison of perceived masticatory ability in completely edentulous patients treated with thermoplastic complete denture versus single implant-retained mandibular overdenture: a single-center prospective observational study.

Background: This study aimed to compare the perceived masticatory ability (PrMA) in completely edentulous patients (EDPs) with thermoplastic conventional complete dentures (CDs) versus single implant-retained mandibular overdentures. Methods: The current study was conducted in the outpatient Prosthodontic Clinic, Faculty of Dental Medicine, Al-Azhar University, Cairo, Egypt. PrMA was evaluated in 45 completely edentulous patients (46% males, mean age 50.4 ± 4.7 years). Each patient received a thermoplastic PMMA complete denture (Polyan IC TM Bredent GmbH & Co.KG, Germany). The PrMA was evaluated at one-month and six-month intervals of denture use. An immediate loading single implant was placed into the mid-symphyseal for each patient, and the denture was adjusted. Subsequently, the PrMA was reevaluated after one month and six months. The data were collected and statistically analyzed using the SPSS@V25 to assess the changes in PrMA. Results: The PrMA demonstrated improvement after six months of thermoplastic conventional denture use. However, this improvement was not statistically significant (p = 0.405). In addition, the PrMA showed a substantial increase following a single implant placement at one and six months (p < 0.001) of the overdenture use compared to the conventional denture. The PrMA insignificantly improved (p = 0.397) after six months of the single implant retained overdenture use. Discussion: The study's findings indicate that using immediate loading single implant-retained mandibular overdentures significantly improved PrMA in completely edentulous patients.

Integrating renewable energy devices with streetscape elements to electrify the Egyptian roads.

The high percentage of carbon emissions, which leads to various environmental problems such as air pollution and global warming, is one of the critical issues resulting from the growth of cities. International agreements are being established to prevent these negative effects. Non-renewable resources are also being depleted and may become extinct in future generations. Due to the extensive use of fossil fuels by automobiles, data show that the transportation sector is responsible for roughly a quarter of worldwide carbon emissions. On the other hand, in developing nations, energy is scarce in many neighborhoods and districts because the governments are unable to meet the community's need for power supply. This research aims to work on techniques that will reduce the carbon emissions produced by roadways while also building environmentally friendly neighborhoods by electrifying the roads using (RE). A novel component called "Energy-Road Scape" (ERS) elements will be used to demonstrate how to generate (RE) and, hence, reduce carbon emissions. This element is the result of integrating streetscape elements with (RE). This research presents a database for ERS elements and properties as a tool for architects and urban designers to design ERS elements instead of utilizing regular streetscape elements.

The effect of using data palm waste fibers in plain concrete mixture by comparing three pre-treatment techniques.

The high rates of industrial and agricultural wastes and byproduct production produced several environmental concerns in addition to increasing the risks of contaminating natural resources. The amount of organic waste has been rising over the past few decades, but it has been poorly managed, especially in smaller countries where it is either burned, improperly disposed, or thrown in landfills. Moreover, the production of concrete generates a large amount of waste that has a negative impact on our planet even though it is an extremely significant building material. The potential of developing another plain concrete mixture sample with date palm mesh addition to create more environmentally friendly concrete with better qualities. In addition to using experimental quantitative research to measure the effectiveness of various concrete mixes after adding palm tree residues that underwent biological, chemical, & mechanical treatments, a theoretical qualitative method was also employed in this study to evaluate and identify the ideal mixture design. The prototypes' strength, density, thermal conductivity, slump, and absorption rate were all measured during the experiments. Having a lower heat conductivity and greater strength, the mechanically treated fibers with a 0.6% addition provided the best prototype, according to the research findings.

Psychological Impact of COVID-19 on Dental Graduates: A Cross-Sectional Study.

Background The pandemic-induced physical closure of educational institutions led to challenges for senior dental students that might affect their psychological status. This study aimed to assess stress, anxiety, and subjective worries among dental interns post-COVID-19. Methodology A self-structured questionnaire was sent to Alexandria University and Taibah University dental interns. The questionnaire included sociodemographic data, self-reported comorbidities, behavioral risk factors, Kessler Psychological Distress Scale (K-10), Generalized Anxiety Disorder 7-Item (GAD-7) scale, and future subjective worries regarding the dental profession post-COVID-19. Results A total of 129 interns participated, with the majority (79.1%) being females. Overall, 90.7% were unmarried, 80.6% lived with a family, 93.8% were free from systemic comorbidities, 82.17% were satisfied with their current life, and 63.6% felt positive quite often. K-10 distress levels were reported as very high (38%) and high (33.3%), and perceived satisfaction with current social life was significantly associated with moderate-to-high distress levels. Feeling positive about life quite often was significantly associated with very high distress levels. Mild GAD-7 anxiety levels were reported in 40.3% and were significantly associated with females, who perceived positive satisfaction with their current social life and felt positive about life. Most agreed that their profession would be risky, their ability to perform their job to the best would be jeopardized, and they would need extra precautions in clinical training post-COVID-19; however, they disagree with postponing their training until COVID-19 cases declined entirely. Conclusions Dental interns were affected by the lockdown, especially female interns. Psychological therapy is advised for stressed dental students.

Effectiveness of Virtual Reality and Interactive Simulators on Dental Education Outcomes: Systematic Review.

In recent years, virtual reality and interactive digital simulations have been used in dental education to train dental students before interacting with real patients. Scientific evidence presented the application of virtual technology in dental education and some recent publications suggested that virtual and haptic technologies may have positive effects on dental education outcomes. The aim of this systematic review was to determine whether virtual technologies have positive effects on dental education outcomes and to explore the attitudes of dental students and educators toward these technologies. A thorough search was conducted in PubMed, Scopus, MEDLINE (via EBSCO), The Cochrane Library (via Wiley), Web of Science Core Collection (via Thomson Reuters), and Dentistry and Oral Science source (via EBSCO) using the keywords (student, dental) AND (education, dental) AND (virtual reality) OR (augmented reality) OR (haptics) OR (simulation) AND (dentistry) OR (dental medicine). The quality of the reported information was assessed following the Preferred Reporting Items for Systematic Review and Meta-Analysis (PRISMA) statement for systematic reviews. A total of 73 publications were considered for this review. Fifty-two of the selected studies showed significant improvement in educational outcomes and virtual technologies were positively perceived by all the participants. Within the limitations of this review, virtual technology appears to improve education outcomes in dental students. Further studies with larger samples and longer term clinical trials are needed to substantiate this potential positive impact of various virtual technologies on dental education outcomes.