RESUMO
Residual DNA (rDNA) is comprised of deoxyribonucleic acid (DNA) fragments and longer length molecules originating from the host organism that may be present in samples from recombinant biological processes. Although similar in basic structural base pair units, rDNA may exist in different sizes and physical forms. Interest in measuring rDNA in recombinant products is based primarily on demonstration of effective purification during manufacturing, but also on some hypothetical concerns that, in rare cases, depending on the host expression system, some DNA sequences may be potentially infectious or oncogenic (e.g., HIV virus and the Ras oncogene, respectively). Recent studies suggest that a sequence known as long interspersed nucleotide element-1 (LINE-1), widely distributed in the mammalian genome, is active as a retrotransposon that can be transcribed to RNA, reverse-transcribed into DNA and inserts into a new site in genome. This integration process could potentially disrupt critical gene functions or induce tumorigenesis in mammals. Genomic DNA from microbial sources, on the other hand, could add to risk of immunogenicity to the target recombinant protein being expressed, due to the high CpG content and unmethylated DNA sequence. For these and other reasons, it is necessary for manufacturers to show clearance of DNA throughout production processes and to confirm low levels in the final drug substance using an appropriately specific and quantitative analytical method. The heterogeneity of potential rDNA sequences that might be makes the testing of all potential analytes challenging. The most common methodology for rDNA quantitation used currently is real-time polymerase chain reaction (RT-PCR), a robust and proven technology. Like most rDNA quantitation methods, the specificity of RT-PCR is limited by the sequences to which the primers are directed. To address this, primase-based whole genome amplification is introduced herein. This paper will review the recent advancement in rDNA quantitation and recent findings regarding potential risks of immunogenicity, infectivity, and oncogenicity of rDNA.
Assuntos
DNA/análise , DNA/genética , Genômica/métodos , Reação em Cadeia da Polimerase em Tempo Real/métodos , Alinhamento de Sequência/métodos , Animais , Sequência de Bases , Biotecnologia/métodos , Linhagem Celular , Humanos , Dados de Sequência MolecularRESUMO
Toll-like receptor (TLR)-expressing cells, for the first time, detected and identified a microbial contaminant in a product made in Escherichia coli using an old manufacturing process. It was suspected of having a microbial contaminant(s) because, although it tested negative by standard pyrogen assays, it was associated with adverse events in early clinical trials. The assay readout is the induction of NF-kappaB and/or cytokines in response to TLR activation. Four coded samples, labeled A to D, including a sample prepared by the older manufacturing process, were submitted. The cell lines were activated only by samples B and D. Sample D stimulated only Mono-Mac 6 and HEK-human TLR4 (hTLR4) cells and was later identified as lipopolysaccharide. Except for TLR3 cells, sample B stimulated cells bearing the different TLRs (TLRs 2, 4, 5, 7, 8, and 9) and nontransfected HEK293 cells. These data suggested that flagellin was the microbial contaminant, since TLR5, the receptor for flagellin, is known to be expressed constitutively on HEK293 cells. Moreover, purified flagellin from Salmonella enterica serovar Typhimurium behaved like sample B, stimulating HEK293 and HEK-hTLR5 cells but not HEK-hTLR3 cells, and this stimulation by flagellin and sample B was blocked by an anti-hTLR5 neutralizing antibody. Western blots showed bands positive for flagellin and sample B with the molecular sizes expected for the flagellins from S. Typhimurium and E. coli, respectively. Mass spectrometry data were consistent with the presence of flagellin in the manufacturer's sample B. Taken together, these data indicate that the microbial contaminant in sample B was flagellin and may have been associated with adverse events when the recombinant product was administered.
Assuntos
Produtos Biológicos , Contaminação de Medicamentos , Escherichia coli/isolamento & purificação , Imunoensaio/métodos , Salmonella typhimurium/isolamento & purificação , Receptores Toll-Like/imunologia , Western Blotting , Linhagem Celular , Citocinas/metabolismo , Escherichia coli/imunologia , Flagelina/imunologia , Flagelina/isolamento & purificação , Humanos , Lipopolissacarídeos/imunologia , Lipopolissacarídeos/isolamento & purificação , Espectrometria de Massas , NF-kappa B/metabolismo , Salmonella typhimurium/imunologiaRESUMO
Host cell proteins (HCPs) are those produced or encoded by the organisms and unrelated to the intended recombinant product. Some are necessary for growth, survival, and normal cellular processing whereas others may be non-essential, simply carried along as baggage. Like the recombinant product, HCPs may also be modified by the host with a number of post-translational modifications. Regardless of the utility, or lack thereof, HCPs are undesirable in the final drug substance. Though commonly present in small quantities (parts per million expressed as nanograms per milligrams of the intended recombinant protein) much effort and cost is expended by industry to remove them. The purpose of this review is to summarize what is of relevance in regards to the biology, the impact of genomics and proteomics on HCP evaluation, the regulatory expectations, analytical approaches, and various methodologies to remove HCPs with bioprocessing. Historical data, bioinformatics approaches and industrial case study examples are provided. Finally, a proposal for a risk assessment tool is provided which brings these facets together and proposes a means for manufacturers to classify and organize a control strategy leading to meaningful product specifications.
Assuntos
Produtos Biológicos/efeitos adversos , Produtos Biológicos/isolamento & purificação , Efeitos Colaterais e Reações Adversas Relacionados a Medicamentos/prevenção & controle , Medição de Risco , Animais , HumanosRESUMO
Biological activity is a critical quality attribute for biopharmaceuticals, which is accurately measured using an appropriate relative potency bioassay. Developing a bioassay is a complex, rigorous undertaking that needs to address several challenges including modelling all of the mechanisms of action associated with the biotherapeutic. Bioassay development is also an exciting and fast evolving field, not only from a scientific, medical and technological point of view, but also in terms of statistical approaches and regulatory expectations. This has led to an industry-wide discussion on the most appropriate ways to develop, validate and control the bioassays throughout the drug lifecycle.
Assuntos
Produtos Biológicos/farmacologia , Avaliação Pré-Clínica de Medicamentos/métodos , Animais , Humanos , Controle de Qualidade , Projetos de PesquisaRESUMO
Antibody-dependent cell-mediated cytotoxicity (ADCC) is an important mechanism of action (MOA) of several therapeutic antibody drugs and evaluation in ADCC bioassays is important in antibody drug development and maintenance. Three types of effector cells now routinely used in bioassay evaluation of ADCC are natural killer cells from human donors (FcγRIIIA+primary NK), FcγRIIIA engineered NK-92 cells and FcγRIIIA/NFAT-RE/luc2 engineered Jurkat T cells. Engineered effector cells were developed to address need for improved precision and accuracy of classic NK cell ADCC bioassays. The main purpose of our study was to rationalize which of these ADCC effector cells best simulate the expected response in human subjects and to identify which effector cells and assays best fit ADCC bioassay needs during antibody drug development. We characterized differences between the effector cells and compared ADCC biological activities using the well-known humanized IgG1 antibody drug, trastuzumab. The three effector cell types studied expressed either V-158 or F-158 allotype of FcγRIIIA, hence six cell preparations were compared. Our results demonstrate highest surface expression of FcγRIIIA in primary NK and engineered NK-92 (V-158) cells with nearly all expressed on the cell surface. In contrast, expression in engineered Jurkat T cells was low with only a small percentage expressed on the cell surface. Studies evaluating binding of trastuzumab to effector cells demonstrated the highest affinity of FcγRIIIA in primary NK and NK-92 (V-158) cells. ADCC cytotoxicity studies showed greatest trastuzumab potency in primary NK and engineered NK-92 (V-158) cells and negligible cell lysis obtained using engineered Jurkat T cells. In contrast, the engineered Jurkat T (V-158) cells responded as effectively as primary NK (V/V) cells to nuclear factor of activated T cells (NFAT2) activation upon binding of trastuzumab to FcγRIIIA, demonstrating similar ADCC pathway activation in these cells despite the low surface expression of FcγRIIIA and its low affinity for trastuzumab. Dose-response range of trastuzumab in activation of NFAT2 (measured as pNFAT2 dephosphorylation) was very similar to response in classic ADCC assay for primary and NK-92 cells and to response in ADCC reporter assay for Jurkat T effector cells, bridging the assays. Trastuzumab potency in ADCC reporter assay using the engineered Jurkat T cells was close to that seen using either primary NK or engineered NK-92 cells in classic ADCC assay. In summary, all three effector cell systems differentially express FcγRIIIA and provide dose-dependent ADCC pathway activity, yet only primary NK and engineered NK-92 cells are capable of inducing ADCC-mediated cell lysis. Engineered Jurkat T effector cells have value to assure antibody manufacturing consistency and in other applications where accuracy and precision are important. For functional assessment of ADCC activity, primary NK or NK-92 (V-158) cells better reflect the physiologically relevant ADCC mechanism of action. As an engineered cell line, NK-92 cells may behave more reproducibly than primary NK, but this must be balanced with the objective for biological relevance in decisions on which NK cells to use in assay.
Assuntos
Citotoxicidade Celular Dependente de Anticorpos , Bioensaio/métodos , Engenharia Celular , Células Matadoras Naturais/imunologia , Receptores de IgG/isolamento & purificação , Linhagem Celular Tumoral , Genótipo , Humanos , Células Jurkat , Células Matadoras Naturais/metabolismo , Cultura Primária de Células , Receptores de IgG/imunologiaRESUMO
We have shown how product associating E. coli host cell proteins (HCPs) OppA and DppA can be substantially separated from apolipoprotein A-I(Milano) (apo A-I(M)) using Butyl Sepharose hydrophobic interaction chromatography (HIC). This work illustrates the complex problems that frequently arise during development and scale-up of biopharmaceutical manufacturing processes. Product association of the HCPs is confirmed using co-immunoprecipitation and Western blotting techniques. Two-dimensional gel electrophoresis and mass spectrometry techniques are used to confirm the identity of OppA and DppA. In this example, clearance of these difficult to separate HCPs decreased significantly when the process was scaled to a 1.4 m diameter column. Laboratory-scale experimentation and trouble shooting identified several key parameters that could be further optimized to improve HCP clearance. The key parameters included resin loading, peak cut point on the ascending side, wash volume, and wash salt concentration. By implementing all of the process improvements that were identified, it was possible to obtain adequate HCP clearance so as to meet the final specification. Although it remains speculative, it is believed that viscosity effects may have contributed to the lower HCP clearance observed early in the manufacturing campaign.