Photochromism from wavelength-selective colloidal phase segregation.

Phase segregation is ubiquitously observed in immiscible mixtures, such as oil and water, in which the mixing entropy is overcome by the segregation enthalpy1-3. In monodispersed colloidal systems, however, the colloidal-colloidal interactions are usually non-specific and short-ranged, which leads to negligible segregation enthalpy4. The recently developed photoactive colloidal particles show long-range phoretic interactions, which can be readily tuned with incident light, suggesting an ideal model for studying phase behaviour and structure evolution kinetics5,6. In this work, we design a simple spectral selective active colloidal system, in which TiO2 colloidal species were coded with spectral distinctive dyes to form a photochromic colloidal swarm. In this system, the particle-particle interactions can be programmed by combining incident light with various wavelengths and intensities to enable controllable colloidal gelation and segregation. Furthermore, by mixing the cyan, magenta and yellow colloids, a dynamic photochromic colloidal swarm is formulated. On illumination of coloured light, the colloidal swarm adapts the appearance of incident light due to layered phase segregation, presenting a facile approach towards coloured electronic paper and self-powered optical camouflage.

Spiky Magnetic Microparticles Synthesized from Microrod-Stabilized Pickering Emulsion.

Tailoring the microstructure of magnetic microparticles is of vital importance for their applications. Spiky magnetic particles, such as those made from sunflower pollens, have shown promise in single cell treatment and biofilm removal. Synthetic methods that can replicate or extend the functionality of such spiky particles would be advantageous for their widespread utilization. In this work, a wet-chemical method is introduced for spiky magnetic particles that are templated from microrod-stabilized Pickering emulsions. The spiky morphology is generated by the upright attachment of silica microrods at the oil-water interface of oil droplets. Spiky magnetic microparticles with control over the length of the spikes are obtained by dispersing hydrophobic magnetic nanoparticles in the oil phase and photopolymerizing the monomer. The spiky morphology dramatically enhances colloidal stability of these particles in high ionic strength solutions and physiologic media such as human saliva and saline-based biofilm suspension. To demonstrate their utility, the spiky magnetic particles are applied for magnetically controlled removal of oral biofilms and retrieval of bacteria for diagnostic sampling. This method expands the toolbox for engineering microparticle morphology and could promote the fabrication of functional magnetic microrobots.

Polyhedral Micromotors of Metal-Organic Frameworks: Symmetry Breaking and Propulsion.

Colloidal micromotors can autonomously propel due to their broken symmetry that leads to unbalanced local mechanical forces. Most commonly, micromotors are synthesized to possess a Janus structure or its variants, having two components distinct in shape, composition, or surface joined together on opposite sides. Here, we report on an alternative approach for creating micromotors, where microcrystals of metal-organic frameworks (MOFs) with various polyhedral shapes are propelled under an AC electric field. In these cases, symmetry breaking is realized by orienting the polyhedral particles in a unique direction to generate uneven electrohydrodynamic flow. The particle orientations are controlled by a delicate competition between the electric and gravitational forces exerted on the particle, which we rationalize using experiments and a theoretical model. Furthermore, by leveraging the MOF types and shapes, or surface properties, we show that the propulsion of MOF motors can be tuned or reversed. Because of the flexibility in designing MOFs and their one-step scalable synthesis, our strategy is simple yet versatile for making well-defined functional micromotors.

Colloidal synthesis of metallodielectric Janus matchsticks.

We present a gram-scale synthesis of metallodielectric Janus matchsticks, which feature a gold-coated silica sphere and a silica rod. SiO2 Janus matchsticks are synthesized in one batch by growing amine-functionalized SiO2 spheres at the end of SiO2 rods. Gold deposition on the spheres produces Au-SiO2 Janus matchsticks with an aspect ratio controlled by the rod length. The metallodielectric Janus matchsticks, produced by scalable colloidal synthesis, hold great potential as functional colloidal materials.

Biomimetic thermoresponsive superstructures by colloidal soft-and-hard co-assembly.

Soft-and-hard hybrid structures are ubiquitous in biological systems and have inspired the design of man-made mechanical devices, actuators, and robots. The realization of these structures, however, has been challenging at microscale, where material integration and actuation become exceedingly less practical. Here, through simple colloidal assembly, we create microscale superstructures consisting of soft and hard materials, which, serving as microactuators, have thermoresponsive shape-transforming properties. In this case, anisotropic metal-organic framework (MOF) particles as the hard components are integrated with liquid droplets, forming spine-mimicking colloidal chains via valence-limited assembly. The chains, with alternating soft and hard segments, are referred to as MicroSpine and can reversibly change shape, switching between straight and curved states through a thermoresponsive swelling/deswelling mechanism. By solidification of the liquid parts within a chain with prescribed patterns, we design various chain morphologies, such as "colloidal arms," with controlled actuating behaviors. The chains are further used to build colloidal capsules, which encapsulate and release guests by the temperature-programmed actuation.

Binary Phases and Crystals Assembled from Active and Passive Colloids.

Classic binary materials, ranging from polymer blends to table salts, contain equilibrium phases or crystals of two interacting components. Here, we report on the construction of binary colloidal materials out of equilibrium by employing active particles and passive particles that dynamically interact and organize. Key to our scheme is the introduction of photoactive microspheres whose activity can be precisely tuned. This allows us to leverage the complex nonequilibrium interplay between the constituent components for dynamic coassembly. A wide variety of binary structures have thus been realized, including the liquid-crystal phases and crystal-crystal phases via phase separation and, counterintuitively, the binary crystalline compounds. The obtained structures are validated by computer simulations, which reveal unexpected kinetic pathways that are unique for active systems. With these findings, our strategy could facilitate the design and fabrication of multicomponent materials beyond equilibrium.

Light-Activated Colloidal Micromotors with Synthetically Tunable Shapes and Shape-Directed Propulsion.

Controlling the propulsion modes of colloidal micromotors, from translational to spinning and helical motion, expands the versatility of their potential applications in microrobotics and micromachinery. Engineering colloidal shapes with designed asymmetry can regulate their propulsion behaviors, yet current methods rely on complicated and costly fabrication processes such as lithography. Herein, we present a solution-based synthesis of light-activated colloidal motors adopting straight and various tunable bent geometries, which feature controlled asymmetry and allow shape-directed propulsions. The keys for our strategy are the synthesis of bent silica rods with a tailored bending position and degree, together with the site-specific installation of a photoactive engine. Upon light illumination, the resulting particles propel autonomously, whereby their shape information is translated to various propulsion modes including linear locomotion, steering, and spinning. This low-cost, scalable method for fabricating micromotors with a high degree of control of shapes could promote study in microscale actuation, in active assembly, and eventually for fabrication of colloidal functional materials.

Ligands with 1,10-phenanthroline scaffold for highly regioselective iron-catalyzed alkene hydrosilylation.

Transition-metal-catalyzed alkene hydrosilylation is one of the most important homogeneous catalytic reactions, and the development of methods that use base metals, especially iron, as catalysts for this transformation is a growing area of research. However, the limited number of ligand scaffolds applicable for base-metal-catalyzed alkene hydrosilylation has seriously hindered advances in this area. Herein, we report the use of 1,10-phenanthroline ligands in base-metal catalysts for alkene hydrosilylation. In particular, iron catalysts with 2,9-diaryl-1,10-phenanthroline ligands exhibit unexpected reactivity and selectivity for hydrosilylation of alkenes, including unique benzylic selectivity with internal alkenes, Markovnikov selectivity with terminal styrenes and 1,3-dienes, and excellent activity toward aliphatic terminal alkenes. According to the mechanistic studies, the unusual benzylic selectivity of this hydrosilylation initiates from π-π interaction between the phenyl of the alkene and the phenanthroline of the ligand. This ligand scaffold and its unique catalytic model will open possibilities for base-metal-catalyzed hydrosilylation reactions.