Mechanistic understanding of the thermal-assisted photocatalytic oxidation of methanol-to-formaldehyde with water vapor over Pt/SrTiO3.

Anaerobic thermal-assisted photocatalytic methanol conversion in the gas phase in the presence of water vapor has been suggested as an interesting way to generate formaldehyde as a valuable coupled product in addition to H2 production. Here, the reaction mechanism and photocatalyst deactivation are investigated in detail using in situ diffuse reflectance infrared fourier transform (DRIFTS) and electron paramagnetic resonance (EPR) spectroscopy. EPR shows that paramagnetic oxygen vacancies are not involved in the reaction mechanism over undoped SrTiO3. Instead, on an optimized 0.1 wt% Pt/SrTiO3 photocatalyst, methoxy species are formed by dissociative adsorption of methanol leading to formaldehyde formation while the formation of CO, CO2 (via a formate intermediate) and methyl formate occurs through three concurrent reactions from formyl species. Our findings suggest that CO adsorbed on Pt is a spectator species not perturbing the reaction kinetics, and deactivation is shown to be strongly correlated with the accumulation of formate groups on SrTiO3, which is more pronounced at high reaction temperatures. The mechanistic understanding provided here forms the basis for the further optimization of photocatalysts to increase methanol conversion and improve formaldehyde selectivity.

Scalable Synthesis of Multi-Metal Electrocatalyst Powders and Electrodes and their Application for Oxygen Evolution and Water Splitting.

Multi-metal electrocatalysts provide nearly unlimited catalytic possibilities arising from synergistic element interactions. We propose a polymer/metal precursor spraying technique that can easily be adapted to produce a large variety of compositional different multi-metal catalyst materials. To demonstrate this, 11 catalysts were synthesized, characterized, and investigated for the oxygen evolution reaction (OER). Further investigation of the most active OER catalyst, namely CoNiFeMoCr, revealed a polycrystalline structure, and operando Raman measurements indicate that multiple active sites are participating in the reaction. Moreover, Ni foam-supported CoNiFeMoCr electrodes were developed and applied for water splitting in flow-through electrolysis cells with electrolyte gaps and in zero-gap membrane electrode assembly (MEA) configurations. The proposed alkaline MEA-type electrolyzers reached up to 3 A cm-2 , and 24 h measurements demonstrated no loss of current density of 1 A cm-2 .

Differentiating between Acidic and Basic Surface Hydroxyls on Metal Oxides by Fluoride Substitution: A Case Study on Blue TiO2 from Laser Defect Engineering.

Both oxygen vacancies and surface hydroxyls play a crucial role in catalysis. Yet, their relationship is not often explored. Herein, we prepare two series of TiO2 (rutile and P25) with increasing oxygen deficiency and Ti3+ concentration by pulsed laser defect engineering in liquid (PUDEL), and selectively quantify the acidic and basic surface OH by fluoride substitution. As indicated by EPR spectroscopy, the laser-generated Ti3+ exist near the surface of rutile, but appear to be deeper in the bulk for P25. Fluoride substitution shows that extra acidic bridging OH are selectively created on rutile, while the surface OH density remains constant for P25. These observations suggest near-surface Ti3+ are highly related to surface bridging OH, presumably the former increasing the electron density of the bridging oxygen to form more of the latter. We anticipate that fluoride substitution will enable better characterization of surface OH and its correlation with defects in metal oxides.

Introducing Stacking Faults into Three-Dimensional Branched Nickel Nanoparticles for Improved Catalytic Activity.

Creating high surface area nanocatalysts that contain stacking faults is a promising strategy to improve catalytic activity. Stacking faults can tune the reactivity of the active sites, leading to improved catalytic performance. The formation of branched metal nanoparticles with control of the stacking fault density is synthetically challenging. In this work, we demonstrate that varying the branch width by altering the size of the seed that the branch grows off is an effective method to precisely tune the stacking fault density in branched Ni nanoparticles. A high density of stacking faults across the Ni branches was found to lower the energy barrier for Ni2+/Ni3+ oxidation and result in enhanced activity for electrocatalytic oxidation of 5-hydroxylmethylfurfural. These results show the ability to synthetically control the stacking fault density in branched nanoparticles as a basis for enhanced catalytic activity.

Interactions of water and short-chain alcohols with CoFe2O4(001) surfaces at low coverages.

Iron and cobalt-based oxides crystallizing in the spinel structure are efficient and affordable catalysts for the oxidation of organics, yet, the detailed understanding of their surface structure and reactivity is limited. To fill this gap, we have investigated the (001) surfaces of cobalt ferrite, CoFe2O4, with the A- and B-layer terminations using density functional theory (DFT/PBE0) and an embedded cluster model. We have considered the five-fold coordinated Co2+/3+ (Oh), two-fold coordinated Fe2+ (Td), and an oxygen vacancy, as active sites for the adsorption of water and short-chain alcohols: methanol, ethanol, and 2-propanol, in the low coverage regime. The adsorbates dissociate upon adsorption on the Fe sites whereas the adsorption is mainly molecular on Co. At oxygen vacancies, the adsorbates always dissociate, fill the vacancy and form (partially) hydroxylated surfaces. The computed vibrational spectra for the most stable configurations are compared with results from diffuse reflectance infrared Fourier transform spectroscopy.

Liquid-Phase Cyclohexene Oxidation with O2 over Spray-Flame-Synthesized La1-x Srx CoO3 Perovskite Nanoparticles.

La1-x Srx CoO3 (x=0, 0.1, 0.2, 0.3, 0.4) nanoparticles were prepared by spray-flame synthesis and applied in the liquid-phase oxidation of cyclohexene with molecular O2 as oxidant under mild conditions. The catalysts were systematically characterized by state-of-the-art techniques. With increasing Sr content, the concentration of surface oxygen vacancy defects increases, which is beneficial for cyclohexene oxidation, but the surface concentration of less active Co2+ was also increased. However, Co2+ cations have a superior activity towards peroxide decomposition, which also plays an important role in cyclohexene oxidation. A Sr doping of 20 at. % was found to be the optimum in terms of activity and product selectivity. The catalyst also showed excellent reusability over three catalytic runs; this can be attributed to its highly stable particle size and morphology. Kinetic investigations revealed first-order reaction kinetics for temperatures between 60 and 100 °C and an apparent activation energy of 68 kJ mol-1 for cyclohexene oxidation. Moreover, the reaction was not affected by the applied O2 pressure in the range from 10 to 20 bar. In situ attenuated total reflection infrared spectroscopy was used to monitor the conversion of cyclohexene and the formation of reaction products including the key intermediate cyclohex-2-ene-1-hydroperoxide; spin trap electron paramagnetic resonance spectroscopy provided strong evidence for a radical reaction pathway by identifying the cyclohexenyl alkoxyl radical.

The Roles of Composition and Mesostructure of Cobalt-Based Spinel Catalysts in Oxygen Evolution Reactions.

By using the crystalline precursor decomposition approach and direct co-precipitation the composition and mesostructure of cobalt-based spinels can be controlled. A systematic substitution of cobalt with redox-active iron and redox-inactive magnesium and aluminum in a cobalt spinel with anisotropic particle morphology with a preferred 111 surface termination is presented, resulting in a substitution series including Co3 O4 , MgCo2 O4 , Co2 FeO4 , Co2 AlO4 and CoFe2 O4 . The role of redox pairs in the spinels is investigated in chemical water oxidation by using ceric ammonium nitrate (CAN test), electrochemical oxygen evolution reaction (OER) and H2 O2 decomposition. Studying the effect of dominant surface termination, isotropic Co3 O4 and CoFe2 O4 catalysts with more or less spherical particles are compared to their anisotropic analogues. For CAN-test and OER, Co3+ plays the major role for high activity. In H2 O2 decomposition, Co2+ reveals itself to be of major importance. Redox active cations in the structure enhance the catalytic activity in all reactions. A benefit of a predominant 111 surface termination depends on the cobalt oxidation state in the as-prepared catalysts and the investigated reaction.

A Perspective on Heterogeneous Catalysts for the Selective Oxidation of Alcohols.

Selective oxidation of higher alcohols using heterogeneous catalysts is an important reaction in the synthesis of fine chemicals with added value. Though the process for primary alcohol oxidation is industrially established, there is still a lack of fundamental understanding considering the complexity of the catalysts and their dynamics under reaction conditions, especially when higher alcohols and liquid-phase reaction media are involved. Additionally, new materials should be developed offering higher activity, selectivity, and stability. This can be achieved by unraveling the structure-performance correlations of these catalysts under reaction conditions. In this regard, researchers are encouraged to develop more advanced characterization techniques to address the complex interplay between the solid surface, the dissolved reactants, and the solvent. In this mini-review, we report some of the most important approaches taken in the field and give a perspective on how to tackle the complex challenges for different approaches in alcohol oxidation while providing insight into the remaining challenges.

Formic Acid-Assisted Selective Hydrogenolysis of 5-Hydroxymethylfurfural to 2,5-Dimethylfuran over Bifunctional Pd Nanoparticles Supported on N-Doped Mesoporous Carbon.

Biomass-derived 5-hydroxymethylfurfural (HMF) is regarded as one of the most promising platform chemicals to produce 2,5-dimethylfuran (DMF) as a potential liquid transportation fuel. Pd nanoparticles supported on N-containing and N-free mesoporous carbon materials were prepared, characterized, and applied in the hydrogenolysis of HMF to DMF under mild reaction conditions. Quantitative conversion of HMF to DMF was achieved in the presence of formic acid (FA) and H2 over Pd/NMC within 2 h. The reaction mechanism, especially the multiple roles of FA, was explored through a detailed comparative study by varying hydrogen source, additive, and substrate as well as by applying in situ ATR-IR spectroscopy. The major role of FA is to shift the dominant reaction pathway from the hydrogenation of the aldehyde group to the hydrogenolysis of the hydroxymethyl group via the protonation by FA at the C-OH group, lowering the activation barrier of the C-O bond cleavage and thus significantly enhancing the reaction rate. XPS results and DFT calculations revealed that Pd2+ species interacting with pyridine-like N atoms significantly enhance the selective hydrogenolysis of the C-OH bond in the presence of FA due to their high ability for the activation of FA and the stabilization of H- .

Anchoring of palladium nanoparticles on N-doped mesoporous carbon.

Pd nanoparticles deposited on nitrogen-doped mesoporous carbon are promising catalysts for highly selective and effective catalytic hydrogenation reactions. To design and utilize these novel catalysts, it is essential to understand the effect of N doping on the metal-support interactions. A combined experimental (X-ray photoelectron spectroscopy) and computational (density functional theory) approach is used to identify preferential adsorption sites and to give detailed explanations of the corresponding metal-support interactions. Pyridinic N atoms turned out to be the preferential adsorption sites for Pd nanoparticles on nitrogen-doped mesoporous carbon, interacting through their lone pairs (LPs) with the Pd atoms via N-LP - Pd dσ and N-LP - Pd s and Pd dπ - π* charge transfer, which leads to a change in the Pd oxidation state. Our results evidence the existence of bifunctional palladium nanoparticles containing Pd0 and Pd2+ centers.

A Universal Nano-capillary Based Method of Catalyst Immobilization for Liquid-Cell Transmission Electron Microscopy.

A universal nano-capillary based method for sample deposition on the silicon nitride membrane of liquid-cell transmission electron microscopy (LCTEM) chips is demonstrated. It is applicable to all substances which can be dispersed in a solvent and are suitable for drop casting, including catalysts, biological samples, and polymers. Most importantly, this method overcomes limitations concerning sample immobilization due to the fragility of the ultra-thin silicon nitride membrane required for electron transmission. Thus, a straightforward way is presented to widen the research area of LCTEM to encompass any sample which can be externally deposited beforehand. Using this method, Nix B nanoparticles are deposited on the µm-scale working electrode of the LCTEM chip and in situ observation of single catalyst particles during ethanol oxidation is for the first time successfully monitored by means of TEM movies.

Faceted Branched Nickel Nanoparticles with Tunable Branch Length for High-Activity Electrocatalytic Oxidation of Biomass.

Controlling the formation of nanosized branched nanoparticles with high uniformity is one of the major challenges in synthesizing nanocatalysts with improved activity and stability. Using a cubic-core hexagonal-branch mechanism to form highly monodisperse branched nanoparticles, we vary the length of the nickel branches. Lengthening the nickel branches, with their high coverage of active facets, is shown to improve activity for electrocatalytic oxidation of 5-hydroxymethylfurfural (HMF), as an example for biomass conversion.

Operando Thin-Layer ATR-FTIR Spectroelectrochemical Radial Flow Cell with Tilt Correction and Borehole Electrode.

A novel spectroelectrochemical ATR-FTIR thin-film cell was designed and applied to elucidate the intermediates during electrocatalytic alcohol oxidation. In the novel cell design, the working electrode is positioned coplanar above the internal reflection element (IRE) to ensure uniform electrolyte film thickness at reaction conditions. The depletion of the reactant (i.e., ethanol or ethylene glycol in the case of electrocatalytic alcohol oxidation) is decreased by a specifically designed flow-through glassy carbon borehole electrode embedded in PEEK. The electrolyte can be pumped through the disk-shaped gap between the ring working electrode and the IRE into the borehole via an external peristaltic pump. To ensure a radially uniform electrolyte flow, the working electrode and the internal reflection element need to be aligned in parallel at a well-controlled distance, which was achieved by a three-microelectrode-assisted tilt correction. Tilt correction of this four-electrode ensemble and the IRE was performed by three step-motor-driven micrometer screws that allow adjustment of the electrode orientation. The effect of electrolyte pumping through the borehole electrode was analyzed by performing anodic ethanol oxidation using nickel boride as electrocatalyst. The applicability, reliability, and functionality of the cell was further assessed by oxidizing ethylene glycol and determining the reaction products as a function of the electrolyte flow rate. It is found to be essential to induce forced electrolyte convection into the thin electrolyte layer to achieve well-defined steady-state conditions, as mass transport by diffusion is by far insufficient, resulting in reactant depletion, product accumulation, and local pH changes.

Oxygen Evolution Electrocatalysis of a Single MOF-Derived Composite Nanoparticle on the Tip of a Nanoelectrode.

Determination of the intrinsic electrocatalytic activity of nanomaterials by means of macroelectrode techniques is compromised by ensemble and film effects. Here, a unique "particle on a stick" approach is used to grow a single metal-organic framework (MOF; ZIF-67) nanoparticle on a nanoelectrode surface which is pyrolyzed to generate a cobalt/nitrogen-doped carbon (CoN/C) composite nanoparticle that exhibits very high catalytic activity towards the oxygen evolution reaction (OER) with a current density of up to 230 mA cm-2 at 1.77 V (vs. RHE), and a high turnover frequency (TOF) of 29.7 s-1 at 540 mV overpotential. Identical location transmission electron microscopy (IL-TEM) analysis substantiates the "self-sacrificial" template nature of the MOF, while post-electrocatalysis studies reveal agglomeration of Co centers within the CoN/C composite during the OER. "Single-entity" electrochemical analysis allows for deriving the intrinsic electrocatalytic activity and furnishes insight into the transient behavior of the electrocatalyst under reaction conditions.

Atomic-Scale Explanation of O2 Activation at the Au-TiO2 Interface.

By a combination of electron paramagnetic resonance spectroscopy, finite-temperature ab initio simulations, and electronic structure analyses, the activation of molecular dioxygen at the interface of gold nanoparticles and titania in Au/TiO2 catalysts is explained at the atomic scale by tracing processes down to the molecular orbital picture. Direct evidence is provided that excess electrons in TiO2, for example created by photoexcitation of the semiconductor, migrate to the gold particles and from there to oxygen molecules adsorbed at gold/titania perimeter sites. Superoxide species are formed more efficiently in this way than on the bare TiO2 surface. This catalytic effect of the gold nanoparticles is attributed to a weakening of the internal O-O bond, leading to a preferential splitting of the molecule at shorter bond lengths together with a 70% decrease of the dissociation free energy barrier compared to the non-catalyzed case on bare TiO2. The findings are an important step forward in the clarification of the role of gold in (photo)catalytic processes.

Highly Efficient Photocatalytic Degradation of Dyes by a Copper-Triazolate Metal-Organic Framework.

A copper(I) 3,5-diphenyltriazolate metal-organic framework (CuTz-1) was synthesized and extensively characterized by using a multi-technique approach. The combined results provided solid evidence that CuTz-1 features an unprecedented Cu5 tz6 cluster as the secondary building unit (SBU) with channels approximately 8.3 Šin diameter. This metal-organic framework (MOF) material, which is both thermally and chemically (basic and acidic) stable, exhibited semiconductivity and high photocatalytic activity towards the degradation of dyes in the presence of H2 O2 . Its catalytic performance was superior to that of reported MOFs and comparable to some composites, which has been attributed to its high efficiency in generating . OH, the most active species for the degradation of dyes. It is suggested that the photogenerated holes are trapped by CuI , which yields CuII , the latter of which behaves as a catalyst for a Fenton-like reaction to produce an excess amount of . OH in addition to that formed through the scavenging of photogenerated electrons by H2 O2 . Furthermore, it was shown that a dye mixture (methyl orange, methyl blue, methylene blue, and rhodamine B) could be totally decolorized by using CuTz-1 as a photocatalyst in the presence of H2 O2 under the irradiation of a Xe lamp or natural sunlight.

Catalysis of Carbon Dioxide Photoreduction on Nanosheets: Fundamentals and Challenges.

The transformation of CO2 into fuels and chemicals by photocatalysis is a promising strategy to provide a long-term solution to mitigating global warming and energy-supply problems. Achievements in photocatalysis during the last decade have sparked increased interest in using sunlight to reduce CO2 . Traditional semiconductors used in photocatalysis (e.g. TiO2 ) are not suitable for use in natural sunlight and their performance is not sufficient even under UV irradiation. Some two-dimensional (2D) materials have recently been designed for the catalytic reduction of CO2 . These materials still require significant modification, which is a challenge when designing a photocatalytic process. An overarching aim of this Review is to summarize the literature on the photocatalytic conversion of CO2 by various 2D materials in the liquid phase, with special attention given to the development of novel 2D photocatalyst materials to provide a basis for improved materials.

Electrocatalytic Oxidation of 5-(Hydroxymethyl)furfural Using High-Surface-Area Nickel Boride.

The electrochemical oxidation of the biorefinery product 5-(hydroxymethyl)furfural (HMF) to 2,5-furandicarboxylic acid (FDCA), an important platform chemical for the polymer industry, is receiving increasing interest. FDCA-based polymers such as polyethylene 2,5-furandicarboxylate (PEF) are sustainable candidates for replacing polyethylene terephthalate (PET). Herein, we report the highly efficient electrocatalytic oxidation of HMF to FDCA, using Ni foam modified with high-surface-area nickel boride (Nix B) as the electrode. Constant potential electrolysis in combination with HPLC revealed a high faradaic efficiency of close to 100 % towards the production of FDCA with a yield of 98.5 %. Operando electrochemistry coupled to ATR-IR spectroscopy indicated that HMF is oxidized preferentially via 5-hydroxymethyl-2-furancarboxylic acid rather than via 2,5-diformylfuran, which is in agreement with HPLC results. This study not only reports a low-cost active electrocatalyst material for the electrochemical oxidation of HMF to FDCA, but additionally provides insight into the reaction pathway.

Spectroelectrochemical studies on the effect of cations in the alkaline glycerol oxidation reaction over carbon nanotube-supported Pd nanoparticles.

The effects of the alkali cations Na+ and K+ were investigated in the alkaline electrochemical oxidation of glycerol over Pd nanoparticles (NPs) deposited on functionalized carbon nanotubes (CNTs). The electrocatalytic activity was assessed by cyclic voltammetry revealing a lower overpotential of glycerol oxidation for nitrogen-functionalized Pd/NCNTs compared with oxygen-functionalized Pd/OCNTs. Whereas significantly lower current densities were observed for Pd/OCNT in NaOH than in KOH in agreement with stronger non-covalent interactions on the Pd surface, Pd/NCNT achieved an approximately three-times higher current density in NaOH than in KOH. In situ electrochemistry/IR spectroscopy was applied to unravel the product distribution as a function of the applied potential in NaOH and KOH. The IR spectra exhibited strongly changing band patterns upon varying the potential between 0.77 and 1.17 V vs RHE: at low potentials oxidized C3 species such as mesoxalate and tartronate were formed predominantly, and with increasing potentials C2 and C1 species originating from C-C bond cleavage were identified. The tendency to produce carbonate was found to be less pronounced in KOH. The less favored formation of highly oxidized C3 species and of carbonate is deduced to be the origin of the lower current densities in the cyclic voltammograms (CVs) for Pd/NCNT in KOH. The enhanced current densities in NaOH are rationalized by the presence of Na+ ions bound to the basic nitrogen species in the NCNT support. Adsorbed Na+ ions can form complexes with the organic molecules, presumably enhanced by the chelate effect. In this way, the organic molecules are assumed to be bound more tightly to the NCNT support in close proximity to the Pd NPs facilitating their oxidation.

Micrometer-Precise Determination of the Thin Electrolyte Layer of a Spectroelectrochemical Cell by Microelectrode Approach Curves.

A spectroelectrochemical cell is presented that allows investigations of electrochemical reactions by means of attenuated total reflection infrared (ATR-IR) spectroscopy. The electrode holder for the working (WE), counter and reference electrode as mounted in the IR spectrometer cause the formation of a thin electrolyte layer between the internal reflection element (IRE) and the surface of the WE. The thickness of this thin electrolyte layer (dTL) was estimated by performing a scanning electrochemical microscopy-(SECM) like approach of a Pt microelectrode (ME), which was leveled with the WE toward the IRE surface. The precise lowering of the ME/WE plane toward the IRE was enabled by a micrometer screw. The approach curve was recorded in negative feedback mode of SECM and revealed the contact point of the ME and WE on the IRE, which was used as reference point to perform the electro-oxidation of ethanol over a drop-casted Pd/NCNT catalyst on the WE at different thin-layer thicknesses by cyclic voltammetry. The reaction products were detected in the liquid electrolyte by IR spectroscopy, and the effect of variations in dTL on the current densities and IR spectra were analyzed and discussed. The obtained data identify dTL as an important variable in thin-layer experiments with electrochemical reactions and FTIR readout.