Functionalisation of Inorganic Material Surfaces with Staphylococcus Protein A: A Molecular Dynamics Study.

Staphylococcus protein A (SpA) is found in the cell wall of Staphylococcus aureus bacteria. Its ability to bind to the constant Fc regions of antibodies means it is useful for antibody extraction, and further integration with inorganic materials can lead to the development of diagnostics and therapeutics. We have investigated the adsorption of SpA on inorganic surface models such as experimentally relevant negatively charged silica, as well as positively charged and neutral surfaces, by use of fully atomistic molecular dynamics simulations. We have found that SpA, which is itself negatively charged at pH7, is able to adsorb on all our surface models. However, adsorption on charged surfaces is more specific in terms of protein orientation compared to a neutral Au (111) surface, while the protein structure is generally well maintained in all cases. The results indicate that SpA adsorption is optimal on the siloxide-rich silica surface, which is negative at pH7 since this keeps the Fc binding regions free to interact with other species in solution. Due to the dominant role of electrostatics, the results are transferable to other inorganic materials and pave the way for new diagnostic and therapeutic designs where SpA might be used to conjugate antibodies to nanoparticles.

The Role of Antibodies in the Treatment of SARS-CoV-2 Virus Infection, and Evaluating Their Contribution to Antibody-Dependent Enhancement of Infection.

Antibodies play a crucial role in the immune response, in fighting off pathogens as well as helping create strong immunological memory. Antibody-dependent enhancement (ADE) occurs when non-neutralising antibodies recognise and bind to a pathogen, but are unable to prevent infection, and is widely known and is reported as occurring in infection caused by several viruses. This narrative review explores the ADE phenomenon, its occurrence in viral infections and evaluates its role in infection by SARS-CoV-2 virus, which causes coronavirus disease 2019 (COVID-19). As of yet, there is no clear evidence of ADE in SARS-CoV-2, though this area is still subject to further study.

Biomolecular interactions with nanoparticles: applications for coronavirus disease 2019.

Nanoparticles are small particles sized 1-100 nm, which have a large surface-to-volume ratio, allowing efficient adsorption of drugs, proteins, and other chemical compounds. Consequently, functionalized nanoparticles have potential diagnostic and therapeutic applications. A variety of nanoparticles have been studied, including those constructed from inorganic materials, biopolymers, and lipids. In this review, we focus on recent work targeting the severe acute respiratory syndrome coronavirus 2 virus that causes coronavirus disease (COVID-19). Understanding the interactions between coronavirus-specific proteins (such as the spike protein and its host cell receptor angiotensin-converting enzyme 2) with different nanoparticles paves the way to the development of new therapeutics and diagnostics that are urgently needed for the fight against COVID-19, and indeed for related future viral threats that may emerge.

Critical role of tyrosine-20 in formation of gold nanoclusters within lysozyme: a molecular dynamics study.

Lysozyme is one of the most commonly used proteins for encapsulating gold nanoclusters, yielding Ly-AuNC complexes. While possible applications of Ly-AuNCs in environmental, biological and trace metal sensing in solution have been demonstrated, there is currently a poor understanding of the physical characteristics of the Ly-AuNC complex. In this study we have employed fully atomistic molecular dynamics simulations to gain an understanding of the formation of Au clusters within the protein. It was found that in order to form AuNCs in the simulations, an approach of targeted insertion of Au atoms at a critical surface residue was needed. Tyrosine is known to be crucial for the reduction of Au salts experimentally, and our simulations showed that Tyr20 is the key residue for the formation of an AuNC beneath the protein surface in the α-helical domain. It is hoped these observations will aid future improvements and modification of Ly-AuNCs via alterations of the alpha-helix domain or Tyr20.

Probing beta amyloid aggregation using fluorescence anisotropy: experiments and simulation.

The aggregation of beta amyloid (Ab) protein is associated with the development of Alzheimer's disease. In this work we monitor Ab aggregation using fluorescence anisotropy, a technique that provides information on the rotational diffusion of the fluorescing tyrosine (Tyr) side chains. We also perform Monte Carlo (MC) and fully atomistic Molecular Dynamics (MD) simulations to interpret the experiments. The experimental results show that there are two different rotational timescales contributing to the anisotropy. Our MC simulation captures this behaviour in a coarse-scale manner, and, more importantly, shows that the Tyr side chains must have their movements restricted in order to reproduce the anisotropy. The MD simulations provide a molecular scale view, and indeed show that aggregation restricts the Try side chains to yield anisotropy in line with the experimental results. This combination of experiment and simulation therefore provides a unique insight into the aggregation process, and we suggest how this approach might be used to gain further information on aggregating protein systems.

Adsorption of Fibronectin Fragment on Surfaces Using Fully Atomistic Molecular Dynamics Simulations.

The effect of surface chemistry on the adsorption characteristics of a fibronectin fragment (FNIII8⁻10) was investigated using fully atomistic molecular dynamics simulations. Model surfaces were constructed to replicate self-assembled monolayers terminated with methyl, hydroxyl, amine, and carboxyl moieties. It was found that adsorption of FNIII8⁻10 on charged surfaces is rapid, specific, and driven by electrostatic interactions, and that the anchoring residues are either polar uncharged or of opposing charge to that of the targeted surfaces. On charged surfaces the presence of a strongly bound layer of water molecules and ions hinders FNIII8⁻10 adsorption. In contrast, adsorption kinetics on uncharged surfaces are slow and non-specific, as they are driven by van der Waals interactions, and the anchoring residues are polar uncharged. Due to existence of a positively charged area around its cell-binding region, FNIII8⁻10 is available for subsequent cell binding when adsorbed on a positively charged surface, but not when adsorbed on a negatively charged surface. On uncharged surfaces, the availability of the fibronectin fragment's cell-binding region is not clearly distinguished because adsorption is much less specific.

Lysozyme adsorption at a silica surface using simulation and experiment: effects of pH on protein layer structure.

Hen Egg White Lysozyme (HEWL) is a widely used exemplar to study protein adsorption on surfaces and interfaces. Here we use fully atomistic Molecular Dynamics (MD) simulations, Multi-Parametric Surface Plasmon Resonance (MP-SPR), contact angle and zeta potential measurements to study HEWL adsorption at a silica surface. The simulations provide a detailed description of the adsorption mechanism and indicate that at pH7 the main adsorption driving force is electrostatics, supplemented by weaker hydrophobic forces. Moreover, they reveal the preferred orientation of the adsorbed protein and show that its structure is only slightly altered at the interface with the surface. This provides the basis for interpreting the experimental results, which indicate the surface adsorbs a close-packed monolayer at about pH10 where the surface has a large negative zeta potential and the HEWL is positively charged. At higher pH, the adsorption amount of the protein layer is greatly reduced due to the loss of charge on the protein. At lower pH, the smaller zeta potential of the surface leads to lower HEWL adsorption. These interpretations are complemented by the contact angle measurements that show how the hydrophobicity of the surface is greatest when the surface coverage is highest. The simulations provide details of the hydrophobic residues exposed to solution by the adsorbed HEWL, completing the picture of the protein layer structure.

Exploiting the Fc base of IgG antibodies to create functional nanoparticle conjugates.

The structures of the Fc base of various IgG antibodies have been examined with a view to understanding how this region can be used to conjugate IgG to nanoparticles. The base structure is found to be largely consistent across a range of species and subtypes, comprising a hydrophobic region surrounded by hydrophilic residues, some of which are charged at physiological conditions. In addition, atomistic Molecular Dynamics simulations were performed to explore how model nanoparticles interact with the base using neutral and negatively charged gold nanoparticles. Both types of nanoparticle interacted readily with the base, leading to an adaptation of the antibody base surface to enhance the interactions. Furthermore, these interactions left the rest of the domain at the base of the Fc region structurally intact. This implies that coupling nanoparticles to the base of an IgG molecule is both feasible and desirable, since it leaves the antibody free to interact with its surroundings so that antigen-binding functionality can be retained. These results will therefore help guide future attempts to develop new nanotechnologies that exploit the unique properties of both antibodies and nanoparticles.

Properties of Packed Bed Structures Formed during Filtration: A Two and Three-Dimensional Model.

Agglomeration is an issue that causes many problems during secondary processing for pharmaceutical companies, causing material to need further processing and costing additional time and resources to ensure a satisfactory outcome. A potential source of agglomeration arises from the particle contacts established during filtration that lead to robust agglomerates forming during drying, so that a necessary first step toward understanding agglomeration is to study the packing properties of filtration beds. Here, we present two and three-dimensional models simulating the formation of packed bed structures during filtration. The models use circular and spherical particles of different sizes, mimicking the bimodal particle size distributions sometimes encountered in industrial practice. The statistics of packing and void formation, along with the distribution of interparticle contacts and percolation structures, are presented and discussed in the context of filtration, drying, and agglomeration. The model paves the way for predictive capabilities that can lead to the rational design of processes to minimize the impact of agglomeration.

Chitin and Chitosan Binding to the α-Chitin Crystal: A Molecular Dynamics Study.

Understanding the binding of chitosan oligomers to the surface of a chitin nanocrystal is important for improving the enzymatic deacetylation of chitin and for the design of chitin/chitosan composite films. Here, we study the binding of several chito-oligomers to the (100) surface of an α-chitin crystal using molecular dynamics (MD), steered MD, and umbrella sampling. The convergence of the free energy was carefully considered and yielded a binding energies of -12.5 and -2 kcal mol-1 for 6-monomer-long chitin and uncharged chitosan oligomers, respectively. We also found that the results for the umbrella sampling were consistent with the force profile from the steered MD and with classical MD simulations of the adsorption process. Our results give insight into the molecular-scale interactions, which can be helpful for the design of new chitin composite films. Furthermore, the free energy curves we present can be used to validate coarse-grained models for chitin and chitosan, which are necessary to study the self-assembly of chitin crystals due to the long time scale of the process.

Recent Advances in Photothermal Therapies Against Cancer and the Role of Membrane Transporter Modulators on the Efficacy of This Approach.

Recently, much research is focused on the use of photothermal therapy (PTT) as an advanced method to treat various types of cancer. The PTT approach primarily utilizes nanoparticles (NPs) made from metals, carbon, or semiconductors that can convert near-infrared laser irradiation, which penetrates tissues, into local heat that induces cancer cell death. An alternative approach is to utilize NPs (such as liposomes) to carry suitable dye molecules to the same end. Numerous studies concerning PTT have shown that local heat released in cancer cells may suppress the expression of membrane transporter proteins such as P-glycoprotein (P-gp) and multidrug resistance-associated protein 1 (MRP1), thus enhancing cytotoxicity and reverse multidrug resistance. In addition, because NPs may be loaded with different substances, researchers have designed multifunctional NPs for PTT by including several agents such as membrane transporter modulators, anticancer drugs, and photothermal agents. This review will focus on the recent advances in PTT utilizing various types of NPs, and their components and characteristics. In addition, the role of membrane transporters in PTT will be highlighted and different methods of transporter modulation will be summarized from several PTT studies in which multifunctional NPs were used to treat cancers in vitro and in vivo.

Psychiatric disorder as a risk factor for cancer: different analytic strategies produce different findings.

BACKGROUND: Reported associations between psychiatric disorders and cancer incidence are inconsistent, with cancer rates in psychiatric patients that are variously higher than, similar to, or lower than the general population. Understanding these associations is complicated by difficulties in establishing the timing of onset of psychiatric disorders and cancer, and by the possibility of reverse causality. Some studies have dealt with this problem by excluding patients with cancers predating their psychiatric illness; others have not considered the issue. METHODS: We examined associations between psychiatric hospitalization and cancer incidence in a cohort of 1,165,039 Swedish men, and we explored the impact of different analytic strategies on these associations using real and simulated data. RESULTS: Relative to men without psychiatric hospitalization, we observed consistent increases in smoking-related cancers in those with psychiatric hospitalizations, regardless of analytic approach (eg, hazard ratio = 1.73 [95% confidence interval = 1.52-1.96]). However, associations with cancers unrelated to smoking were highly dependent on analytic strategy. In analyses based on the full cohort, we observed no association or a modest increase in cancer incidence in those with psychiatric hospitalizations (1.14 [1.07-1.22]). In contrast, when men whose cancer predated their psychiatric hospitalizations were excluded, future cancer incidence was lower in psychiatric patients (0.72 [0.67-0.78]). Results from simulated data suggest that even modest exclusions of this type can lead to strong artifactual associations. CONCLUSIONS: Psychiatric disorder-cancer incidence associations are complex and influenced by analytic strategy. A better understanding of the temporal relationship between psychiatric disorder and cancer incidence is required.

Protein diffusion and long-term adsorption states at charged solid surfaces.

The diffusion pathways of lysozyme adsorbed to a model charged ionic surface are studied using fully atomistic steered molecular dynamics simulation. The simulations start from existing protein adsorption trajectories, where it has been found that one particular residue, Arg128 at the N,C-terminal face, plays a crucial role in anchoring the lysozyme to the surface [Langmuir 2010 , 26 , 15954 - 15965]. We first investigate the desorption pathway for the protein by pulling the Arg128 side chain away from the surface in the normal direction, and its subsequent readsorption, before studying diffusion pathways by pulling the Arg128 side chain parallel to the surface. We find that the orientation of this side chain plays a decisive role in the diffusion process. Initially, it is oriented normal to the surface, aligning in the electrostatic field of the surface during the adsorption process, but after resorption it lies parallel to the surface, being unable to return to its original orientation due to geometric constraints arising from structured water layers at the surface. Diffusion from this alternative adsorption state has a lower energy barrier of ∼0.9 eV, associated with breaking hydrogen bonds along the pathway, in reasonable agreement with the barrier inferred from previous experimental observation of lysozyme surface clustering. These results show the importance of studying protein diffusion alongside adsorption to gain full insight into the formation of protein clusters and films, essential steps in the future development of functionalized surfaces.

Tuning Interfacial Concentration Enhancement through Dispersion Interactions to Facilitate Heterogeneous Nucleation.

Classical molecular dynamics simulations were used to investigate how dispersion (van der Waals) interactions between non-polar, hydrophobic surfaces and aqueous glycine solutions affect the solution composition, molecular orientation, and dynamics at the interface. Simulations revealed that dispersion interactions lead to a major increase in the concentration of glycine at the interface in comparison with the bulk solution, resulting from a competition between solute and solvent molecules to be or not to be near the interface. This can then lead to kinetic and/or structural effects facilitating heterogeneous nucleation of glycine at non-polar surfaces, in agreement with recent observations for tridecane, graphene, and polytetrafluoroethylene. A novel parameterization process was developed to map a model surface with tunable dispersion interactions to heptane, tridecane, and graphite materials. The model surface was capable of reproducing the solution structure observed in fully atomistic simulations with excellent agreement and also provided good agreement for dynamic properties, at a significantly reduced computational cost. This approach can be used as an effective tool for screening materials for heterogeneous nucleation enhancement or suppression, based on non-specific dispersion interactions based on bulk material molecular properties, rather than interfacial functional groups, templating or confinement effects.

Structural Analysis of Anti-Hapten Antibodies to Identify Long-Range Structural Movements Induced by Hapten Binding.

Antibodies are well known for their high specificity that has enabled them to be of significant use in both therapeutic and diagnostic applications. Antibodies can recognize different antigens, including proteins, carbohydrates, peptides, nucleic acids, lipids, and small molecular weight haptens that are abundantly available as hormones, pharmaceuticals, and pesticides. Here we focus on a structural analysis of hapten-antibody couples and identify potential structural movements originating from the hapten binding by comparison with unbound antibody, utilizing 40 crystal structures from the Protein Data Bank. Our analysis reveals three binding surface trends; S1 where a pocket forms to accommodate the hapten, S2 where a pocket is removed when the hapten binds, and S3 where no pockets changes are found. S1 and S2 are expected for induced-fit binding, whereas S3 indicates that a pre-existing population of optimal binding antibody conformation exists. The structural analysis reveals four classifications of structural reorganization, some of which correlate to S2 but not to the other binding surface changes. These observations demonstrate the complexity of the antibody-antigen interaction, where structural changes can be restricted to the binding sites, or extend through the constant domains to propagate structural changes. This highlights the importance of structural analysis to ensure successful and compatible transformation of small antibody fragments at the early discovery stage into full antibodies during the subsequent development stages, where long-range structural changes are required for an Fc effector response.

Multiple myeloma: therapeutic delivery of antibodies and aptamers.

Multiple myeloma is the second most common hematological malignancy in adults, accounting for 2% of all cancer-related deaths in the UK. Current chemotherapy-based regimes are insufficient, as most patients relapse and develop therapy resistance. This review focuses on current novel antibody- and aptamer-based therapies aiming to overcome current therapy limitations, as well as their respective limitations and areas of improvement. The use of computer modeling methods, as a tool to study and improve ligand-receptor alignments for the use of novel therapy development will also be discussed, as it has become a rapid, reliable and comparatively inexpensive method of investigation.

Mechanism of hen egg white lysozyme adsorption on a charged solid surface.

The mechanism of hen egg white lysozyme (HEWL) adsorption on a negatively charged, hydrophilic surface has been studied using atomistic molecular dynamics (MD) simulation. Sixteen 90 ns trajectories provide adequate data to allow a detailed description of the adsorption process to be formulated. Two distinct adsorption sites have been identified. The main one is located on the N,C-terminal protein face and comprises Arg128 (the crucial one), supplemented by Arg125, Arg5, and Lys1; the minor one is used accidentally and contains only Arg68. Adsorption of this protein is driven by electrostatics, where the orientation of the protein dipole moment defines the direction of protein movement. The diffusion range on the surface depends on protein side-chain penetration through the surface water layers. This is facilitated by the long-range electric field of the charged surface, which can align polar side chains to be perpendicular to the surface. A simulation of adsorption onto a neutral ionic surface shows no such surface water layer penetration. Therefore, protein flexibility is seen to be an important factor, and to adsorb the HEWL has to adjust its structure. Nevertheless, at a flat surface only a slight loss of α-helical content is required. The adsorbed HEWL molecule is oriented between side-on and end-on ways, where the angle between the protein long axis (which mostly approximates the dipole moment) and the surface varies between 45° and 90°. Simulations with targeted mutations confirm the picture that emerges from these studies. The active site is located on the opposite face to the main adsorption site; hence, the activity of the immobilized HEWL should not be affected by the surface interactions. Our results provide a detailed insight into the adsorption mechanism and protein mobility at the surface. This knowledge will aid the proper interpretation of experimental results and the design of new experiments and functional systems.

What governs protein adsorption and immobilization at a charged solid surface?

The adsorption of hen egg white lysozyme at a model charged surface is studied using fully atomistic molecular dynamics simulations. The simulations are performed over a 90 ns time scale which is sufficient to observe rotational and translational steps in the adsorption process. Electrostatics is found to play a key role in guiding the protein to the favorable binding orientation with the N,C-terminal face against the substrate. However, full immobilization appears to only occur through the strong interaction of Arg128 with the surface, facilitated by the protein's flexibility at the terminal face. Simulated mutation at this residue confirms its crucial role. This work demonstrates that electrostatics alone might not be sufficient to guide the development of material systems that exploit protein adsorption and immobilization.

Antibody-protein binding and conformational changes: identifying allosteric signalling pathways to engineer a better effector response.

Numerous monoclonal antibodies have been developed successfully for the treatment of various diseases. Nevertheless, the development of biotherapeutic antibodies is complex, expensive, and time-consuming, and to facilitate this process, careful structural analysis beyond the antibody binding site is required to develop a more efficacious antibody. In this work, we focused on protein antigens, since they induce the largest antibody changes, and provide interesting cases to compare and contrast. The structures of 15 anti-protein antibodies were analysed to compare the antigen-bound/unbound forms. Surprisingly, three different classes of binding-induced changes were identified. In class (B1), the antigen binding fragment distorted significantly, and we found changes in the loop region of the heavy chain's constant domain; this corresponds well with expected allosteric movements. In class (B2), we found changes in the same loop region without the overall distortion. In class (B3), these changes did not present, and only local changes at the complementarity determining regions were found. Consequently, structural analysis of antibodies is crucial for therapeutic development. Careful evaluation of allosteric movements must be undertaken to develop better effector responses, especially during the transformation of these antibodies from small fragments at the discovery stage to full antibodies at the subsequent development stages.

Interfacial Concentration Effect Facilitates Heterogeneous Nucleation from Solution.

Crystal nucleation from solution plays an important role in environmental, biological, and industrial processes and mainly occurs at interfaces, although the mechanisms are not well understood. We performed nucleation experiments on glycine aqueous solutions and found that an oil-solution interface dramatically accelerates glycine nucleation compared to an air-solution interface. This is surprising given that nonpolar, hydrophobic oil (tridecane) would not be expected to favor heterogeneous nucleation of highly polar, hydrophilic glycine. Molecular dynamics simulations found significantly enhanced vs depleted glycine concentrations at the oil-solution vs air-solution interfaces, respectively. We propose that this interfacial concentration effect facilitates heterogeneous nucleation, and that it is due to dispersion interactions. This interface effect is distinct from previously described mechanisms, including surface functionalization, templating, and confinement and is expected to be present in a wide range of solution systems. This work provides new insight that is essential for understanding and controlling heterogeneous nucleation.