RESUMO
We report a miniaturized, minimally invasive high-density neural recording interface that occupies only a 1.53 mm2 footprint for hybrid integration of a flexible probe and a 256-channel integrated circuit chip. To achieve such a compact form factor, we developed a custom flip-chip bonding technique using anisotropic conductive film and analog circuit-under-pad in a tiny pitch of 75 µm. To enhance signal-to-noise ratios, we applied a reference-replica topology that can provide the matched input impedance for signal and reference paths in low-noise aimpliers (LNAs). The analog front-end (AFE) consists of LNAs, buffers, programmable gain amplifiers, 10b ADCs, a reference generator, a digital controller, and serial-peripheral interfaces (SPIs). The AFE consumes 51.92 µW from 1.2 V and 1.8 V supplies in an area of 0.0161 mm2 per channel, implemented in a 180 nm CMOS process. The AFE shows > 60 dB mid-band CMRR, 6.32 µVrms input-referred noise from 0.5 Hz to 10 kHz, and 48 MΩ input impedance at 1 kHz. The fabricated AFE chip was directly flip-chip bonded with a 256-channel flexible polyimide neural probe and assembled in a tiny head-stage PCB. Full functionalities of the fabricated 256-channel interface were validated in both in vitro and in vivo experiments, demonstrating the presented hybrid neural recording interface is suitable for various neuroscience studies in the quest of large scale, miniaturized recording systems.
Assuntos
Amplificadores Eletrônicos , Neurociências , Desenho de Equipamento , Processamento de Sinais Assistido por ComputadorRESUMO
Objective. Dorsal root ganglia (DRG) are promising sites for recording sensory activity. Current technologies for DRG recording are stiff and typically do not have sufficient site density for high-fidelity neural data techniques.Approach. In acute experiments, we demonstrate single-unit neural recordings in sacral DRG of anesthetized felines using a 4.5µm thick, high-density flexible polyimide microelectrode array with 60 sites and 30-40µm site spacing. We delivered arrays into DRG with ultrananocrystalline diamond shuttles designed for high stiffness affording a smaller footprint. We recorded neural activity during sensory activation, including cutaneous brushing and bladder filling, as well as during electrical stimulation of the pudendal nerve and anal sphincter. We used specialized neural signal analysis software to sort densely packed neural signals.Main results. We successfully delivered arrays in five of six experiments and recorded single-unit sensory activity in four experiments. The median neural signal amplitude was 55µV peak-to-peak and the maximum unique units recorded at one array position was 260, with 157 driven by sensory or electrical stimulation. In one experiment, we used the neural analysis software to track eight sorted single units as the array was retracted â¼500µm.Significance. This study is the first demonstration of ultrathin, flexible, high-density electronics delivered into DRG, with capabilities for recording and tracking sensory information that are a significant improvement over conventional DRG interfaces.
Assuntos
Gânglios Espinais , Nervo Pudendo , Animais , Gatos , Estimulação Elétrica , Microeletrodos , Bexiga UrináriaRESUMO
The mechanical properties of a small fragment (30 bp) of an individual double-stranded deoxyribonucleic acid (dsDNA) in water have been investigated by atomic force microscopy (AFM). We have stretched three systems including ssDNA, double-fixed dsDNA (one strand of the dsDNA molecules was biotinylated at the 3'-end and thiolated at the 5'-end, this was reversed for the other complementary strand) and single-fixed dsDNA (one strand of the dsDNA molecules was biotinylated at the 3'-end and thiolated at the 5'-end, whereas the other complementary strand was biotinylated at only the 5'-end). The achieved thiolation and biotinylation were to bind ds- or ssDNA to the gold surface and streptavidin-coated AFM tip, respectively. Analysis of the force versus displacement (F-D) curves from tip-DNA-substrate systems shows that the pull-off length (L(o)) and stretch length (delta) from the double-fixed system were shorter than those observed in the ssDNA and the single-fixed system. The obtained stretch force (F(st)) from the single-fixed dsDNA was much greater than that from the ssDNA even though it was about 10 pN greater than the one obtained in the double-fixed system. As a result, the Young's modulus of the double-fixed dsDNA was greater than that of the single-fixed dsDNA and the ssDNA. A more reliable stiffness of the dsDNA was observed via the double-fixed system, since there is no effect of the unpaired molecules during stretching, which always occurred in the single-fixed system. The unpaired molecules were also observed by comparing the stiffness of ssDNA and single-fixed dsDNA in which the end of one strand was left free.
Assuntos
DNA/química , Módulo de Elasticidade , Microscopia de Força Atômica/métodos , Biotina/química , DNA de Cadeia Simples/química , Ouro/química , Distribuição Normal , Estreptavidina/química , Compostos de Sulfidrila/químicaRESUMO
The ability to deliver flexible biosensors through the toughest membranes of the central and peripheral nervous system is an important challenge in neuroscience and neural engineering. Bioelectronic devices implanted through dura mater and thick epineurium would ideally create minimal compression and acute damage as they reach the neurons of interest. We demonstrate that a three-dimensional diamond shuttle can be easily made with a vertical support to deliver ultra-compliant polymer microelectrodes (4.5-µm thick) through dura mater and thick epineurium. The diamond shuttle has 54% less cross-sectional area than an equivalently stiff silicon shuttle, which we simulated will result in a 37% reduction in blood vessel damage. We also discovered that higher frequency oscillation of the shuttle (200 Hz) significantly reduced tissue compression regardless of the insertion speed, while slow speeds also independently reduced tissue compression. Insertion and recording performance are demonstrated in rat and feline models, but the large design space of these tools are suitable for research in a variety of animal models and nervous system targets.
RESUMO
Pancreatic cancer is one of the deadliest cancers, with a 5-year survival rate of <10%. The current approach to confirming a tissue diagnosis, endoscopic ultrasound-guided fine-needle aspiration (EUS-FNA), requires a time-consuming, qualitative cytology analysis and may be limited because of sampling error. We designed and engineered a miniaturized optoelectronic sensor to assist in situ, real-time, and objective evaluation of human pancreatic tissues during EUS-FNA. A proof-of-concept prototype sensor, compatible with a 19-gauge hollow-needle commercially available for EUS-FNA, was constructed using microsized optoelectronic chips and microfabrication techniques to perform multisite tissue optical sensing. In our bench-top verification and pilot validation during surgery on freshly excised human pancreatic tissues (four patients), the fabricated sensors showed a comparable performance to our previous fiber-based system. The flexibility in source-detector configuration using microsized chips potentially allows for various light-based sensing techniques inside a confined channel such as a hollow needle or endoscopy.
Assuntos
Pâncreas , Neoplasias Pancreáticas , Aspiração por Agulha Fina Guiada por Ultrassom Endoscópico/métodos , Humanos , Pâncreas/diagnóstico por imagem , Neoplasias Pancreáticas/diagnóstico , Neoplasias PancreáticasRESUMO
Three-dimensional cultures in a microfabricated environment provide in vivo-like conditions for cells, and have been used in a variety of applications in basic and clinical studies. In this study, the contractility of cardiomyocytes in a 3D environment using complex 3D hybrid biopolymer microcantilevers was quantified and compared with that observed in a 2D environment. By measuring the deflections of the microcantilevers with different surfaces and carrying out finite element modeling (FEM) of the focal pressures of the microcantilevers, it was found that the contractile force of high-density cardiomyocytes on 3D grooved surfaces was 65-85% higher than that of cardiomyocytes on flat surfaces. These results were supported by immunostaining, which showed alignment of the cytoskeleton and elongation of the nuclei, as well as by quantitative RT-PCR, which revealed that cells on the grooved surface had experienced sustained stimuli and tighter cell-to-cell interactions.
Assuntos
Estudos de Avaliação como Assunto , Contração Muscular/fisiologia , Miócitos Cardíacos/fisiologia , Animais , Imageamento Tridimensional , Ratos , Ratos Sprague-DawleyRESUMO
OBJECTIVE: The dorsal root ganglia (DRG) are promising nerve structures for sensory neural interfaces because they provide centralized access to primary afferent cell bodies and spinal reflex circuitry. In order to harness this potential, new electrode technologies are needed which take advantage of the unique properties of DRG, specifically the high density of neural cell bodies at the dorsal surface. Here we report initial in vivo results from the development of a flexible non-penetrating polyimide electrode array interfacing with the surface of ganglia. APPROACH: Multiple layouts of a 64-channel iridium electrode (420 µm2) array were tested, with pitch as small as 25 µm. The buccal ganglia of invertebrate sea slug Aplysia californica were used to develop handling and recording techniques with ganglionic surface electrode arrays (GSEAs). We also demonstrated the GSEA's capability to record single- and multi-unit activity from feline lumbosacral DRG related to a variety of sensory inputs, including cutaneous brushing, joint flexion, and bladder pressure. MAIN RESULTS: We recorded action potentials from a variety of Aplysia neurons activated by nerve stimulation, and units were observed firing simultaneously on closely spaced electrode sites. We also recorded single- and multi-unit activity associated with sensory inputs from feline DRG. We utilized spatial oversampling of action potentials on closely-spaced electrode sites to estimate the location of neural sources at between 25 µm and 107 µm below the DRG surface. We also used the high spatial sampling to demonstrate a possible spatial sensory map of one feline's DRG. We obtained activation of sensory fibers with low-amplitude stimulation through individual or groups of GSEA electrode sites. SIGNIFICANCE: Overall, the GSEA has been shown to provide a variety of information types from ganglia neurons and to have significant potential as a tool for neural mapping and interfacing.
Assuntos
Potenciais de Ação/fisiologia , Eletrodos Implantados , Gânglios Espinais/fisiologia , Maleabilidade , Animais , Aplysia , Gatos , Feminino , Gânglios Espinais/cirurgia , Masculino , MicroeletrodosRESUMO
OBJECTIVE: Subcellular-sized chronically implanted recording electrodes have demonstrated significant improvement in single unit (SU) yield over larger recording probes. Additional work expands on this initial success by combining the subcellular fiber-like lattice structures with the design space versatility of silicon microfabrication to further improve the signal-to-noise ratio, density of electrodes, and stability of recorded units over months to years. However, ultrasmall microelectrodes present very high impedance, which must be lowered for SU recordings. While poly(3,4-ethylenedioxythiophene) (PEDOT) doped with polystyrene sulfonate (PSS) coating have demonstrated great success in acute to early-chronic studies for lowering the electrode impedance, concern exists over long-term stability. Here, we demonstrate a new blend of PEDOT doped with carboxyl functionalized multiwalled carbon nanotubes (CNTs), which shows dramatic improvement over the traditional PEDOT/PSS formula. METHODS: Lattice style subcellular electrode arrays were fabricated using previously established method. PEDOT was polymerized with carboxylic acid functionalized carbon nanotubes onto high-impedance (8.0 ± 0.1 MΩ: M ± S.E.) 250-µm(2) gold recording sites. RESULTS: PEDOT/CNT-coated subcellular electrodes demonstrated significant improvement in chronic spike recording stability over four months compared to PEDOT/PSS recording sites. CONCLUSION: These results demonstrate great promise for subcellular-sized recording and stimulation electrodes and long-term stability. SIGNIFICANCE: This project uses leading-edge biomaterials to develop chronic neural probes that are small (subcellular) with excellent electrical properties for stable long-term recordings. High-density ultrasmall electrodes combined with advanced electrode surface modification are likely to make significant contributions to the development of long-term (permanent), high quality, and selective neural interfaces.
Assuntos
Compostos Bicíclicos Heterocíclicos com Pontes/química , Nanotubos de Carbono/química , Próteses Neurais , Neurofisiologia/métodos , Polímeros/química , Animais , Eletrodos Implantados , Desenho de Equipamento , Masculino , Camundongos , Camundongos Endogâmicos C57BLRESUMO
Maximizing the potential of optogenetic approaches in deep brain structures of intact animals requires optical manipulation of neurons at high spatial and temporal resolutions, while simultaneously recording electrical data from those neurons. Here, we present the first fiber-less optoelectrode with a monolithically integrated optical waveguide mixer that can deliver multicolor light at a common waveguide port to achieve multicolor modulation of the same neuronal population in vivo. We demonstrate successful device implementation by achieving efficient coupling between a side-emitting injection laser diode (ILD) and a dielectric optical waveguide mixer via a gradient-index (GRIN) lens. The use of GRIN lenses attains several design features, including high optical coupling and thermal isolation between ILDs and waveguides. We validated the packaged devices in the intact brain of anesthetized mice co-expressing Channelrhodopsin-2 and Archaerhodopsin in pyramidal cells in the hippocampal CA1 region, achieving high quality recording, activation and silencing of the exact same neurons in a given local region. This fully-integrated approach demonstrates the spatial precision and scalability needed to enable independent activation and silencing of the same or different groups of neurons in dense brain regions while simultaneously recording from them, thus considerably advancing the capabilities of currently available optogenetic toolsets.
Assuntos
Região CA1 Hipocampal/metabolismo , Cristalino/metabolismo , Optogenética , Células Piramidais/metabolismo , Animais , Região CA1 Hipocampal/patologia , Eletrodos , Cristalino/patologia , Camundongos , Camundongos Transgênicos , Células Piramidais/patologiaRESUMO
OBJECTIVE: Single carbon fiber electrodes (d = 8.4 µm) insulated with parylene-c and functionalized with PEDOT: pTS have been shown to record single unit activity but manual implantation of these devices with forceps can be difficult. Without an improvement in the insertion method any increase in the channel count by fabricating carbon fiber arrays would be impractical. In this study, we utilize a water soluble coating and structural backbones that allow us to create, implant, and record from fully functionalized arrays of carbon fibers with â¼150 µm pitch. APPROACH: Two approaches were tested for the insertion of carbon fiber arrays. The first method used a poly(ethylene glycol) (PEG) coating that temporarily stiffened the fibers while leaving a small portion at the tip exposed. The small exposed portion (500 µm-1 mm) readily penetrated the brain allowing for an insertion that did not require the handling of each fiber by forceps. The second method involved the fabrication of silicon support structures with individual shanks spaced 150 µm apart. Each shank consisted of a small groove that held an individual carbon fiber. MAIN RESULTS: Our results showed that the PEG coating allowed for the chronic implantation of carbon fiber arrays in five rats with unit activity detected at 31 days post-implant. The silicon support structures recorded single unit activity in three acute rat surgeries. In one of those surgeries a stacked device with three layers of silicon support structures and carbon fibers was built and shown to readily insert into the brain with unit activity on select sites. SIGNIFICANCE: From these studies we have found that carbon fibers spaced at â¼150 µm readily insert into the brain. This greatly increases the recording density of chronic neural probes and paves the way for even higher density devices that have a minimal scarring response.
Assuntos
Potenciais de Ação/fisiologia , Carbono/química , Eletrodos Implantados , Eletroencefalografia/instrumentação , Microeletrodos , Neurônios/fisiologia , Animais , Fibra de Carbono , Condutividade Elétrica , Desenho de Equipamento , Análise de Falha de Equipamento , Masculino , Implantação de Prótese/métodos , Ratos , Ratos Long-Evans , Reprodutibilidade dos Testes , Sensibilidade e Especificidade , Análise Serial de Tecidos/instrumentaçãoRESUMO
Astrocytes are known to serve as scaffolding cells that shape the brain. The physical properties of astrocytes, such as stiffness, are important for their scaffolding function. These properties may be altered in certain pathological conditions, such as in brain cancer. However, actual stiffness of astrocytes is not yet well understood. Here, we report that the astrocyte stiffness is positively correlated with the density of cytoskeletal proteins, such as actin filaments, microtubules, and intermediate filaments. The value of the stiffness of astrocytes as measured by atomic force microscopy (AFM) increases 38-fold in five-week-old rats compared to postnatal-day zero pups. Using multicolor confocal microscopy, we found that the complexity of cytoskeletal proteins, such as actin filaments, microtubules, and intermediate filaments, increase as the animal gets older. Our findings indicate that the change of stiffness positively correlates with the maturation of cytoskeletal proteins, and suggest that AFM can be useful as an analytical and diagnostic tool for neuroscience.