RESUMO
Synthetic strategies to access high-valent iridium complexes usually require use of π donating ligands bearing electronegative atoms (e. g. amide or oxide) or σ donating electropositive atoms (e. g. boryl or hydride). Besides the η5 -(methyl)cyclopentadienyl derivatives, high-valent η1 carbon-ligated iridium complexes are challenging to synthesize. To meet this challenge, this work reports the oxidation behavior of an all-carbon-ligated anionic bis(CCC-pincer) IrIII complex. Being both σ and π donating, the diaryl dipyrido-annulated N-heterocyclic carbene (dpa-NHC) IrIII complex allowed a stepwise 4e- oxidation sequence. The first 2e- oxidation led to an oxidative coupling of two adjacent aryl groups, resulting in formation of a cationic chiral IrIII complex bearing a CCCC-tetradentate ligand. A further 2e- oxidation allowed isolation of a high-valent tricationic complex with a triplet ground state. These results close a synthetic gap for carbon-ligated iridium complexes and demonstrate the electronic tuning potential of organic π ligands for unusual electronic properties.
RESUMO
Direct, transition metal-free B(dan)-installation into organic frameworks has been developed. Heteroaryl-H bonds were transformable into the respective heteroaryl-B(dan) bonds through deprotonation. The resulting heteroaryl-B(dan) compounds, which are otherwise difficult to access, can undergo the direct Suzuki-Miyaura coupling. The method was demonstrated to apply to a silicon nucleophile, giving Lewis acidity-diminished stable silyl-B(dan) and -B(aam) in one pot.
RESUMO
Knee arthrofibrosis is a common complication of knee surgery, caused by excessive scar tissue, which results in functional disability. However, no curative treatment has been established. E8002 is an anti-adhesion material that contains L-ascorbic acid, an antioxidant. We aimed to evaluate the efficacy of E8002 for the prevention of knee arthrofibrosis in a rat model, comprising injury to the surface of the femur and quadriceps muscle 1 cm proximal to the patella. Sixteen male, 8-week-old Sprague Dawley rats were studied: in the Adhesion group, haemorrhagic injury was induced to the quadriceps and bone, and in the E8002 group, an adhesion-preventing film was implanted between the quadriceps and femur after injury. Six weeks following injury, the restriction of knee flexion owing to fibrotic scarring had not worsened in the E8002 group but had worsened in the Adhesion group. The area of fibrotic scarring was smaller in the E8002 group than in the Adhesion group (p < 0.05). In addition, the numbers of fibroblasts (p < 0.05) and myofibroblasts (p < 0.01) in the fibrotic scar were lower in the E8002 group. Thus, E8002 reduces myofibroblast proliferation and fibrotic scar formation and improves the range of motion of the joint in a model of knee injury.
Assuntos
Ácido Ascórbico/farmacologia , Cicatriz/prevenção & controle , Fibrose/tratamento farmacológico , Artropatias/tratamento farmacológico , Traumatismos do Joelho/tratamento farmacológico , Articulação do Joelho/efeitos dos fármacos , Poliésteres/farmacologia , Aderências Teciduais/prevenção & controle , Animais , Cicatriz/metabolismo , Cicatriz/patologia , Fibrose/metabolismo , Fibrose/patologia , Artropatias/metabolismo , Artropatias/patologia , Traumatismos do Joelho/metabolismo , Traumatismos do Joelho/patologia , Articulação do Joelho/metabolismo , Articulação do Joelho/patologia , Masculino , Membranas Artificiais , Amplitude de Movimento Articular , Ratos , Ratos Sprague-Dawley , Aderências Teciduais/metabolismo , Aderências Teciduais/patologiaRESUMO
Meridional tridentate N-heterocyclic carbene (NHC)-based pincer ligands contribute to a substantial growth in modern organometallic chemistry in both homogeneous catalysis and luminescence materials. Among all NHC-based pincer ligands, the dianionic LX2-type CCC-pincer ones constitute the smallest subcategory owing to their limited ligand frameworks suitable for complexation. This work reports a one-pot, high-yield synthesis of a homoleptic anionic all-carbon bis-pincer iridium(III) complex (4) directly from a bis(aryl)-substituted dipyrido-annulated (dpaAr2) imidazolium salt and [Ir(COD)Cl]2 via a cascade of deprotonation/C-H activation processes. Both experimental complexation chemistry and computational mechanistic investigation suggest that the large bite angle and π-rich character of the dpaAr2 NHC are responsible for its facile complexation as a dianionic LX2-type CCC-pincer ligand precursor. The all-carbon ligated iridium(III) complex (4) bearing a π-conjugated ligand scaffold showed remarkably low oxidation potentials, which allows future investigations in its redox chemistry and photophysical properties.
RESUMO
BACKGROUND: Midkine (MK) is a multifunctional cytokine found upregulated in the brain in the presence of different disorders characterized by neuroinflammation, including neurodegenerative disorders and ischemia. The neuroinflammatory response to traumatic brain injury (TBI) represents a key secondary injury factor that can result in further neuronal injury. In the present study, we investigated the role of endogenous MK in secondary injury, including neuroinflammation, immune response, and neuronal apoptosis activity, after TBI. METHODS: Wild type (Mdk+/+) and MK gene deficient (Mdk-/-) mice were subjected to fluid percussion injury for TBI models and compared at 3, 7, and 14 days after TBI, in terms of the following: brain tissue loss, neurological deficits, microglia response, astrocytosis, expression of proinflammatory M1 and anti-inflammatory M2 microglia/macrophage phenotype markers, and apoptotic activity. RESULTS: As opposed to Mdk+/+ mice, Mdk-/- mice reported a significantly reduced area of brain tissue loss and an improvement in their neurological deficits. The ratios of the Iba1-immunoreactive microglia/macrophages in the perilesional site were significantly decreased in Mdk-/- than in the Mdk+/+ mice at 3 days after TBI. However, the ratios of the glial fibrillary acidic protein immunoreactive area were similar between the two groups. The M1 phenotype marker (CD16/32) immunoreactive areas were significantly reduced in Mdk-/- than in the Mdk+/+ mice. Likewise, the mRNA levels of the M1 phenotype markers (TNF-α, CD11b) were significantly decreased in Mdk-/- mice than in Mdk+/+ mice. Furthermore, flow cytometry analysis identified the M2 markers, i.e., CD163+ macrophages cells and arginase-1+ microglia cells, to be significantly higher in Mdk-/- than in Mdk+/+ mice. Finally, the ratios of apoptotic neurons were significantly decreased in the area surrounding the lesion in Mdk-/- than in Mdk+/+ mice following TBI. CONCLUSION: Our findings suggest that MK-deficiency reduced tissue infiltration of microglia/macrophages and altered their polarization status thereby reducing neuroinflammation, neuronal apoptosis, and tissue loss and improving neurological outcomes after TBI. Therefore, targeting MK to modulate neuroinflammation may represent a potential therapeutic strategy for TBI management.
Assuntos
Lesões Encefálicas Traumáticas/genética , Lesões Encefálicas Traumáticas/patologia , Encefalite/genética , Encefalite/patologia , Midkina/genética , Animais , Apoptose/genética , Astrócitos/patologia , Encéfalo/patologia , Proteínas de Ligação ao Cálcio/metabolismo , Polaridade Celular/genética , Proteína Glial Fibrilar Ácida/metabolismo , Camundongos , Camundongos Endogâmicos C57BL , Camundongos Knockout , Proteínas dos Microfilamentos/metabolismo , Microglia/patologia , RNA Mensageiro/biossíntese , RNA Mensageiro/genéticaRESUMO
Perineural adhesions leading to neuropathy are one of the most undesirable consequences of peripheral nerve surgery. However, there are currently no widely used compounds with anti-adhesive effects in the field of peripheral nerve surgery. E8002 is a novel, anti-adhesive, multi-layer membrane that contains L-ascorbic acid (AA). Here, we investigated the effect and mechanism of E8002 in a rat sciatic nerve adhesion model. A total of 21 rats were used. Six weeks after surgery, macroscopic adhesion scores were significantly lower in the E8002 group (adhesion procedure followed by nerve wrapping with E8002) compared to the E8002 AA(-) group (adhesion procedure followed by nerve wrapping with the E8002 membrane excluding AA) and adhesion group (adhesion procedure but no treatment). Correspondingly, a microscopic examination revealed prominent scar tissue in the E8002 AA(-) and adhesion groups. Furthermore, an in vitro study using human blood samples showed that AA enhanced tissue-type, plasminogen activator-mediated fibrinolysis. Altogether, these results suggest that E8002 may exert an anti-adhesive action via AA and the regulation of fibrinolysis.
Assuntos
Ácido Ascórbico/química , Poliésteres/química , Nervo Isquiático/efeitos dos fármacos , Aderências Teciduais/prevenção & controle , Cicatrização/efeitos dos fármacos , Adulto , Animais , Antioxidantes/química , Materiais Biocompatíveis/química , Cicatriz , Feminino , Fibrinólise , Humanos , Masculino , Membranas Artificiais , Pessoa de Meia-Idade , Polímeros/química , Ratos , Ratos Sprague-Dawley , Terapia TrombolíticaRESUMO
Free-standing electrodes, which are free from additives (binders and conductive agents) and even current collectors, are useful in terms of both application research and fundamental study. Here, we demonstrate the preparation of binder-free monolithic carbon electrodes embracing Si nanoparticles in their well-defined porous scaffolds via the one-pot sol-gel reaction followed by carbonization. The free-standing electrodes with a thickness of 150 µm work out as a high-areal-density anode for Li-ion batteries, delivering up to ca. 7 mA h cm-2. As the Si content increases, the capacity decay on cycling becomes pronounced, which is likely to associate with the fracturing and pulverization of Si nanoparticles even with the size smaller than 100 nm after long-term cycles. The thermogravimetry-mass spectrometry profile of the cycled electrode corroborates the successive electrolyte decomposition to grow solid electrolyte interphase (SEI) mainly composed of lithium alkylcarbonates, polymeric species, and LiF, rendering the electrode mass nearly double of its original state after 200 cycles. The elemental mapping analysis reveals that LiF is generated inhomogeneously in the monolithic electrodes unlike the other SEI components, resulting in the concentration gradient depending on the distance from a Li counter electrode.
RESUMO
We present a two-step template-free approach toward monolithic materials with controlled trimodal porous structures with macro-, meso-, and micropores. Our method relies on two ordering processes in discrete length scales: 1)â Spontaneous formation of macroporous structures in monolithic materials by the sol-gel process through the short-range ordered self-assembly of metal-organic frameworks (MOFs), and 2)â reorganization of the framework structures in a mediator solution. The Zr-terephthalate-based MOF (UiO-66-NH2 ) was adopted as a proof of concept. The self-assembly-induced phase separation process offered interconnected macropores with diameters ranging from 0.9 to 1.8â µm. The subsequent reorganization process converted the microporous structure from low crystalline framework to crystalline UiO-66. The resultant mesopore size within the skeletons was controlled in the range from 9 to 21â nm. This approach provides a novel way of designing spaces from nano- to micrometer scale in network-forming materials.
RESUMO
Neuropathic pain after spinal surgery, so-called failed back surgery syndrome, is a frequently observed common complication. One cause of the pain is scar tissue formation, observed as post-surgical epidural adhesions. These adhesions may compress surrounding spinal nerves, resulting in pain, even after successful spinal surgery. E8002 is an anti-adhesive membrane. In Japan, a clinical trial of E8002 is currently ongoing in patients undergoing abdominal surgery. However, animal experiments have not been performed for E8002 in spinal surgery. We assessed the anti-adhesive effect of E8002 in a rat laminectomy model. The dura matter was covered with an E8002 membrane or left uncovered as a control. Neurological evaluations and histopathological findings were compared at six weeks postoperatively. Histopathological analyses were performed by hematoxylinâ»eosin and aldehyde fuchsin-Masson Goldner staining. Three assessment areas were selected at the middle and margins of the laminectomy sites, and the numbers of fibroblasts and inflammatory cells were counted. Blinded histopathological evaluation revealed that adhesions and scar formation were reduced in the E8002 group compared with the control group. The E8002 group had significantly lower numbers of fibroblasts and inflammatory cells than the control group. The present results indicate that E8002 can prevent epidural scar adhesions after laminectomy.
Assuntos
Laminectomia/métodos , Membranas Artificiais , Aderências Teciduais/prevenção & controle , Animais , Laminectomia/efeitos adversos , Masculino , Ratos , Ratos Sprague-DawleyRESUMO
Aerogels are porous materials but show poor mechanical properties and limited functionality, which significantly restrict their practical applications. Preparation of highly bendable and processable aerogels with multifunctionality remains a challenge. Herein we report unprecedented superflexible aerogels based on polyvinylpolydimethylsiloxane (PVPDMS) networks, PVPDMS/polyvinylpolymethylsiloxane (PVPMS) copolymer networks, and PVPDMS/PVPMS/graphene nanocomposites by a facile radical polymerization/hydrolytic polycondensation strategy and ambient pressure drying or freeze drying. The aerogels have a doubly cross-linked organic-inorganic network structure consisting of flexible polydimethylsiloxanes and hydrocarbon chains with tunable cross-linking density, tunable pore size and bulk density. They have a high hydrophobicity and superflexibility and combine selective absorption, efficient separation of oil and water, thermal superinsulation, and strain sensing.
RESUMO
Aerogels are attracting increasing attention due to their high thermal insulation ability as well as unique properties such as high porosity, surface area, and transparency. However, low mechanical strengths, originating from their unique porous structure, impede handling, formability, mass production, and extended applications. This minireview focuses on the strengthening of aerogels by several organic-inorganic hybridization strategies. In particular, successful strengthening methodologies, which employ organo-substituted alkoxysilanes as the single precursor for the sol-gel preparations, developed by the authors are highlighted. Moreover, improvements in compressive strength and elasticity lead to monolithic aerogel-like xerogels through ambient pressure drying. Correlations between structures in different length scales (e.g., molecular, network, and pore structure levels) and resultant mechanical properties are discussed for further understandings and better design toward mechanically improved aerogels/xerogels and their applications.
RESUMO
Reactions of chloromethyltrimethoxysilane (CMTMS) and its derived colloidal network polychloromethylsilsesquioxane (PCMSQ) have been investigated to extend the material design strategy toward functionalized and mechanically reinforced aerogels. In a carefully designed sol-gel system, CMTMS has afforded transparent aerogels in the presence of cationic surfactant. The surface chloromethyl groups with polarity and reactivity are shown to be useful for supporting nanostructures, with photoluminescent carbon dots (C-dots) prepared from polyethylenimine and citric acid as an example. Furthermore, since nucleophilic substitution (SN2) reactions on the surface chloromethyl groups are found to control the equilibrium of formation/dissociation of siloxane bonds, a new gelation strategy triggered by SN2 reactions in sol-gel has been developed. In the presence of nucleophilic organic species such as polyamines, a hybrid network consisting of PCMSQ cross-linked with a polyamine nucleophile can be prepared to enhance mechanical properties of aerogel.
RESUMO
Transparent, low-density ethenylene-bridged polymethylsiloxane [Ethe-BPMS, O2/2(CH3)Si-CHâCH-Si(CH3)O2/2] aerogels from 1,2-bis(methyldiethoxysilyl)ethene have successfully been synthesized via a sol-gel process. A two-step sol-gel process composed of hydrolysis under acidic conditions and polycondensation under basic conditions in a liquid surfactant produces a homogeneous pore structure based on cross-linked nanosized colloidal particles. Visible-light transmittance of the aerogels varies with the concentration of the base catalyst and reaches as high as 87% (at a wavelength of 550 nm for a 10 mm thick sample). Gelation and aging temperature strongly affect the deformation behavior of the resultant aerogels against uniaxial compression, and the obtained aerogels prepared at 80 °C show high elasticity after being unloaded. This highly resilient behavior is primarily derived from the rigidity of ethenylene groups, which is confirmed by a comparison with other aerogels with similar molecular structures, ethylene-bridged polymethylsiloxane and polymethylsilsesquioxane. Applicability of the addition reaction using a Diels-Alder reaction of benzocyclobutene has also been investigated, revealing that a successful addition takes place on the ethenylene linkings, which is verified using Raman and solid-state NMR spectroscopies. Insights into the effect of molecular structure on mechanical properties and the availability of surface functionalization provided in this study are important for realizing transparent aerogels with the desired functionality.
RESUMO
Transparent, monolithic aerogels with nanosized colloidal skeletons have been obtained from a single precursor of 1,2-bis(methyldiethoxysilyl)ethane (BMDEE) by adopting a liquid surfactant and a two-step process involving strong-acid, followed by strong-base, sol-gel reactions. This precursor BMDEE forms the ethylene-bridged polymethylsiloxane (EBPMS, O2/2(CH3)Si-CH2CH2-Si(CH3)O2/2) network, in which each silicon has one methyl, two bridging oxygens, and one bridging ethylene, exhibiting an analogous structure to that of the previously reported polymethylsilsesquioxane (PMSQ, CH3SiO3/2) aerogels having one methyl and three bridging oxygen atoms. Obtained aerogels consist of fine colloidal skeletons and show high visible-light transparency and a flexible deformation behavior against compression without collapse. Similar to the PMSQ aerogels, a careful tuning of synthetic conditions can produce low-density (0.19 g cm-3) and highly transparent (76% at 550 nm, corresponding to 10 mm thick samples) xerogels via ambient pressure drying by solvent evaporation due to their high strength and resilience against compression. Moreover, EBPMS aerogels exhibit higher bending strength and bending strain at break against the three-point bending mode compared to PMSQ aerogels. This improved bendability is presumably derived from the introduced ethylene-bridging parts, suggesting the potential for realizing transparent and bendable aerogels in such polysiloxane materials with organic linking units.
RESUMO
A preceramic polymer route from Ti-based inorganic-organic hybrid networks provides electroconductive N-doped reduced titanium oxides (TinO2n-1) and titanium oxynitrides (TiOxNy) with a monolithic shape as well as well-defined porous structures. This methodology demonstrates an advantageously lower temperature of the crystal phase transition compared to the reduction of TiO2 by carbon or hydrogen. In this study, the effect of calcination conditions on various features of the products has been explored by adopting three different atmospheric conditions and varying the calcination temperature. The detailed crystallographic and elemental analyses disclose the distinguished difference in the phase transition behavior with respect to the calcination atmosphere. The correlation between the crystallization and nitridation behaviors, porous properties, and electric conductivities in the final products is discussed.
RESUMO
The optimization of a porous structure to ensure good separation performances is always a significant issue in high-performance liquid chromatography column design. Recently we reported the homogeneous embedment of Ag nanoparticles in periodic mesoporous silica monolith and the application of such Ag nanoparticles embedded silica monolith for the high-performance liquid chromatography separation of polyaromatic hydrocarbons. However, the separation performance remains to be improved and the retention mechanism as compared with the Ag ion high-performance liquid chromatography technique still needs to be clarified. In this research, Ag nanoparticles were introduced into a macro/mesoporous silica monolith with optimized pore parameters for high-performance liquid chromatography separations. Baseline separation of benzene, naphthalene, anthracene, and pyrene was achieved with the theoretical plate number for analyte naphthalene as 36,000 m(-1). Its separation function was further extended to cis/trans isomers of aromatic compounds where cis/trans stilbenes were chosen as a benchmark. Good separation of cis/trans-stilbene with separation factor as 7 and theoretical plate number as 76,000 m(-1) for cis-stilbene was obtained. The trans isomer, however, is retained more strongly, which contradicts the long- established retention rule of Ag ion chromatography. Such behavior of Ag nanoparticles embedded in a silica column can be attributed to the differences in the molecular geometric configuration of cis/trans stilbenes.
RESUMO
Monolithic macroporous zirconia (ZrO2) derived from ionic precursors has been successfully fabricated via the epoxide-mediated sol-gel route accompanied by phase separation in the presence of propylene oxide (PO) and poly(ethylene oxide) (PEO). The addition of PO used as an acid scavenger mediates the gelation, whereas PEO enhances the polymerization-induced phase separation. The appropriate choice of the starting compositions allows the production of a macroporous zirconia monolith with a porosity of 52.9% and a Brunauer-Emmett-Teller (BET) surface area of 171.9 m2 · g-1. The resultant dried gel is amorphous, whereas tetragonal ZrO2 and monoclinic ZrO2 are precipitated at 400 and 600 °C, respectively, without spoiling the macroporous morphology. After solvothermal treatment with an ethanol solution of ammonia, tetragonal ZrO2 monoliths with smooth skeletons and well-defined mesopores can be obtained, and the BET surface area is enhanced to 583.8 m2 · g-1.
RESUMO
Inspired by homogeneous borane catalysts that promote Si-H bond activation, we herein describe an innovative method for surface modification of silica using hydrosilanes as the modification precursor and tris(pentafluorophenyl)borane (B(C6F5)3) as the catalyst. Since the surface modification reaction between surface silanol and hydrosilane is dehydrogenative, progress and termination of the reaction can easily be confirmed by the naked eye. This new metal-free process can be performed at room temperature and requires less than 5 min to complete. Hydrosilanes bearing a range of functional groups, including alcohols and carboxylic acids, have been immobilized by this method. An excellent preservation of delicate functional groups, which are otherwise decomposed in other methods, makes this methodology appealing for versatile applications.
Assuntos
Silanos/química , Dióxido de Silício/química , Boranos/química , Catálise , Estrutura Molecular , Silanos/síntese química , Propriedades de SuperfícieRESUMO
Organic crystals are a promising class of materials for various optical applications. However, it has been challenging to make macroscopic organic crystals with bicontinuous porosity that are applicable to flow chemistry. In this study, a new class of porous materials, cm-scale crystalline organic monoliths (COMs) with bicontinuous porosity, are synthesized by replicating the porous structure of silica monolith templates. The COMs composed of p-terphenyl can take up more than 30 wt% of an aqueous solution, and the photophysical properties of the p-terphenyl crystals are well maintained in the COMs. The relatively high surface area of the COMs can be exploited for efficient Dexter energy transfer from triplet sensitizers on the pore surface. The resulting triplet excitons in the COMs encounter and annihilate, generating upconverted UV emission. The COMs would open a new avenue toward applications of organic crystals in flow photoreaction systems.
RESUMO
High-performance thermal insulators represented by aerogels are regarded as one of the most promising materials for energy savings. However, significantly low mechanical strength has been a barrier for aerogels to be utilized in various social domains such as houses, buildings, and industrial plants. Here, we report a synthetic strategy to realize highly transparent aerogels with unusually high bending flexibility based on poly(methylsilsesquioxane) (PMSQ) network. We have constructed mesoscopic fine fiber-like structures of various sizes in PMSQ gels by the combination of phase separation suppression by tetramethylammonium hydroxide (TMAOH) and mesoscopic fiber-like assembly by nonionic poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) (PEO-b-PPO-b-PEO) type surfactant. The optimized mesoscale structures of PMSQ gels have realized highly transparent and resilient monolithic aerogels with much high bendability compared to those reported in previous works. This work will provide a way to highly insulating materials with glasslike transparency and high mechanical flexibility.