A general method for rapid synthesis of refractory carbides by low-pressure carbothermal shock reduction.

Refractory carbides are attractive candidates for support materials in heterogeneous catalysis because of their high thermal, chemical, and mechanical stability. However, the industrial applications of refractory carbides, especially silicon carbide (SiC), are greatly hampered by their low surface area and harsh synthetic conditions, typically have a very limited surface area (<200 m2 g-1), and are prepared in a high-temperature environment (>1,400 °C) that lasts for several or even tens of hours. Based on Le Chatelier's principle, we theoretically proposed and experimentally verified that a low-pressure carbothermal reduction (CR) strategy was capable of synthesizing high-surface area SiC (569.9 m2 g-1) at a lower temperature and a faster rate (∼1,300 °C, 50 Pa, 30 s). Such high-surface area SiC possesses excellent thermal stability and antioxidant capacity since it maintained stability under a water-saturated airflow at 650 °C for 100 h. Furthermore, we demonstrated the feasibility of our strategy for scale-up production of high-surface area SiC (460.6 m2 g-1), with a yield larger than 12 g in one experiment, by virtue of an industrial viable vacuum sintering furnace. Importantly, our strategy is  also applicable to the rapid synthesis of refractory metal carbides (NbC, Mo2C, TaC, WC) and even their emerging high-entropy carbides (VNbMoTaWC5, TiVNbTaWC5). Therefore, our low-pressure CR method provides an alternative strategy, not merely limited to temperature and time items, to regulate the synthesis and facilitate the upcoming industrial applications of carbide-based advanced functional materials.

Efficient Tin-Based Perovskite Solar Cells Enabled by Precisely Synthesized Single-Isomer Fullerene Bisadducts with Regulated Molecular Packing.

Designing and synthesizing fullerene bisadducts with a higher-lying conduction band minimum is promising to further improve the device performance of tin-based perovskite solar cells (TPSCs). However, the commonly obtained fullerene bisadduct products are isomeric mixtures and require complicated separation. Moreover, the isomeric mixtures are prone to resulting in energy alignment disorders, interfacial charge loss, and limited device performance improvement. Herein, we synthesized single-isomer C60- and C70-based diethylmalonate functionalized bisadducts (C60BB and C70BB) by utilizing the steric-hindrance-assisted strategy and determined all molecular structures involved by single crystal diffraction. Meanwhile, we found that the different solvents used for processing the fullerene bisadducts can effectively regulate the molecular packing in their films. The dense and amorphous fullerene bisadduct films prepared by using anisole exhibited the highest electron mobility. Finally, C60BB- and C70BB-based TPSCs showed impressive efficiencies up to 14.51 and 14.28%, respectively. These devices also exhibited excellent long-term stability. This work highlights the importance of developing strategies to synthesize single-isomer fullerene bisadducts and regulate their molecular packing to improve TPSCs' performance.

What Elements Really Intercalate into Pd Lattice When Heated in Dimethylformamide?

Palladium hydrides (PdHx) are pivotal in both fundamental research and practical applications across a wide spectrum. PdHx nanocrystals, synthesized by heating in dimethylformamide (DMF), exhibit remarkable stability, granting them widespread applications in the field of electrocatalysis. However, this stability appears inconsistent with their metastable nature. The substantial challenges in characterizing nanoscale structures contribute to the limited understanding of this anomalous phenomenon. Here, through a series of well-conceived experimental designs and advanced characterization techniques, including aberration-corrected scanning transmission electron microscopy (AC-STEM), in situ X-ray diffraction (XRD), and time-of-flight secondary ion mass spectrometry (TOF-SIMS), we have uncovered evidence that indicates the presence of C and N within the lattice of Pd (PdCxNy), rather than H (PdHx). By combining theoretical calculations, we have thoroughly studied the potential configurations and thermodynamic stability of PdCxNy, demonstrating a 2.5:1 ratio of C to N infiltration into the Pd lattice. Furthermore, we successfully modulated the electronic structure of Pd nanocrystals through C and N doping, enhancing their catalytic activity in methanol oxidation reactions. This breakthrough provides a new perspective on the structure and composition of Pd-based nanocrystals infused with light elements, paving the way for the development of advanced catalytic materials in the future.

'Passivated Precursor' Approach to All-Alkynyl-Protected Gold Nanoclusters and Total Structure Determination of Au130.

A 'passivated precursor' approach is developed for the efficient synthesis and isolation of all-alkynyl-protected gold nanoclusters. Direct reduction of dpa-passivated precursor Au-dpa (Hdpa=2,2'-dipyridylamine) in one-pot under ambient conditions gives a series of clusters including Au22(C≡CR)18 (R=-C6H4-2-F), Au36(C≡CR)24, Au44(C≡CR)28, Au130(C≡CR)50, and Au144(C≡CR)60. These clusters can be well separated via column chromatography. The overall isolation yield of this series of clusters is 40 % (based on gold), which is much improved in comparison with previous approaches. It is notable that the molecular structure of the giant cluster Au130(C≡CR)50 is revealed, which presents important information for understanding the structure of the mysterious Au130 nanoclusters. Theoretical calculations indicated Au130(C≡CR)50 has a smaller HOMO-LUMO gap than Au130(S-C6H4-4-CH3)50. This facile and reliable synthetic approach will greatly accelerate further studies on all-alkynyl-protected gold nanoclusters.

Soaking the Rare-Earth Carbonates for a Change: An Alternative Approach to Explore Carbonate Nonlinear Optical Crystals.

Alkali-metal rare-earth carbonates (ARECs) find great potential in nonlinear optical applications. As the most common method, the hydrothermal reaction is widely used in synthesizing ARECs. The black-box nature of the hydrothermal reaction makes it difficult for understanding the formation processes and therefore may slow down the pace of structural discovery. Here, by simply soaking the rare-earth carbonates in Na2CO3 solutions, we successfully obtain a series of noncentrosymmetric Na3RE(CO3)3·6H2O (RE = Tb 1, Sm 2, Eu 3, Gd 4, Dy 5, Ho 6, and Er 7) compounds without using the high-temperature hydrothermal method. The transformation process, investigated by powder X-ray diffraction and scanning electron microscopy, is governed by the concentration of the soaking solutions. Na3Tb(CO3)3·6H2O, as an example, is studied structurally, and its physical properties are characterized. It exhibits a second harmonic generation effect of 0.5 × KDP and a short UV cutoff edge of 222 nm (5.8 eV). Our study provides insights for exploring new AREC structures, which may further advance the development of carbonate nonlinear optical crystals.

Improving the Hydrogen Oxidation Reaction Rate of Ru by Active Hydrogen in the Ultrathin Pd Interlayer.

Enhancing the catalytic activity of Ru metal in the hydrogen oxidation reaction (HOR) potential range, improving the insufficient activity of Ru caused by its oxophilicity, is of great significance for reducing the cost of anion exchange membrane fuel cells (AEMFCs). Here, we use Ru grown on Au@Pd as a model system to understand the underlying mechanism for activity improvement by combining direct in situ surface-enhanced Raman spectroscopy (SERS) evidence of the catalytic reaction intermediate (OHad) with in situ X-ray diffraction (XRD), electrochemical characterization, as well as DFT calculations. The results showed that the Au@Pd@Ru nanocatalyst utilizes the hydrogen storage capacity of the Pd interlayer to "temporarily" store the activated hydrogen enriched at the interface, which spontaneously overflows at the "hydrogen-deficient interface" to react with OHad adsorbed on Ru. It is the essential reason for the enhanced catalytic activity of Ru at anodic potential. This work deepens our understanding of the HOR mechanism and provides new ideas for the rational design of advanced electrocatalysts.

Unconventional Electrochemical Behaviors of Cu Underpotential Deposition in a Chloride-Based Deep Eutectic Solvent: High Underpotential Shift and Low Coverage.

The (5 × 5) Moiré pattern resulting from coadsorption of Cu atoms and chloride ions on the Au(111) electrode is one of the most classical structures for underpotential deposition (UPD) in electrochemical surface science. Although two models have been proposed to describe the pattern, the details of the structure remain ambiguous and controversial, leading to a question that remains to be answered. In this work, we investigate the UPD behaviors of Cu on the Au(111) electrode in a chloride-based deep eutectic solvent ethaline by in situ scanning tunneling microscopy (STM). Benefiting from the properties of the ultraconcentrated electrolyte, we directly image not only Cu but also Cl adlayers by finely tuning tunneling conditions. The structure is unambiguously determined for both Cu and Cl adlayers, where an incommensurate Cu layer is adsorbed on the Au(111) surface with a Cu coverage of 0.64, while the Cl coverage is 0.32 (only half of the expected value); i.e., the atomic arrangement of the observed (5 × 5) Moiré pattern in ethaline matches neither of the models proposed in the literature. Meanwhile, STM results confirm the origin of the cathodic peak in the cyclic voltammogram, which indicates that the underpotential shift of Cu UPD in ethaline indeed increases by ca. 0.40 V compared to its counterpart in a sulfuric acid solution, resulting in a significant deviation from the linear relation between the underpotential shift and the difference in work functions proposed in the literature. The unconventional electrochemical behaviors of Cu UPD reveal the specialty of both the bulk and the interface in the chloride-based deep eutectic solvent.

Trapping an Ester Hydrate Intermediate in a π-Stacked Macrocycle with Multiple Hydrogen Bonds.

Ester hydrates, as the intermediates of the esterification between acid and alcohol, are very short-lived and challenging to be trapped. Therefore, the crystal structures of ester hydrates have rarely been characterized. Herein, we present that the mono-deprotonated ester hydrates [CH3OSO2(OH)2]-, serving as the template for the self-assembly of a π-stacked boat-shaped macrocycle (CH3OSO2(OH)2)0.67(CH3OSO3)1.33@{[ClLCoII]6}·Cl4·13CH3OH·9H2O (1) (L = tris(2-benzimidazolylmethyl) amine), can be trapped in the host by multiple NH···O hydrogen bonds. In the solution of CoCl2, L, and H2SO4 in MeOH, HSO4- reacts with MeOH, producing [CH3OSO3]- via the ester hydrate intermediate of [CH3OSO3(OH)2]-. Both the product and the intermediate serve as the template directing the self-assembly of the π-stacked macrocycle, in which the short-lived ester hydrate is firmly trapped and stabilized, as revealed by single-crystal analysis.

Metalation of a Hierarchical Self-Assembly Consisting of π-Stacked Cubes through Single-Crystal-to-Single-Crystal Transformation.

Single-crystal-to-single-crystal metalation of organic ligands represents a novel method to prepare metal-organic complexes, but remains challenging. Herein, a hierarchical self-assembly {(H12L8)·([N(C2H5)4]+)3·(ClO4-)15·(H2O)32} (1) (L = tris(2-benzimidazolylmethyl) amine) consisting of π-stacked cubes which are assembled from eight partially protonated L ligands is obtained. By soaking the crystals of compound 1 in the aqueous solution of Co(SCN)2, the ligands coordinate with Co2+ ions stoichiometrically and ClO4- exchange with SCN- via single-crystal-to-single-crystal transformation, leading to {([CoSCNL]+)8·([NC8H20]+)3·(SCN)11·(H2O)13} (2).

Heterometallic Coinage Metal Acetylenediide Clusters Showing Tailored Thermochromic Luminescence.

Acetelyenediide (C2 2- ) species have been encapsulated in bimetallic and trimetallic clusters: [(AuL)6 Ag7 (C≡C)3 ](BF4 )7 (2) and [(AuL)6 AgCu6 (C≡C)3 ](BF4 )7 (3), L=phenylbis(2-pyridyl)phosphine (PPhpy2 ). Single-crystal X-ray diffraction analysis revealed that they are isostructural and six silver atoms in 2 are replaced with copper in 3. Both clusters have a trefoil skeleton, which can be viewed as three trigonal bipyramidal (LAu-C≡C-AuL)M2 Ag (M=Ag/Cu) motifs sharing a common silver atom. TDDFT calculations showed Cu-doping significantly increases the energy level of (C2 -Cu)-involved occupied orbital, thus inducing interesting transition coupling of dual-emission at low temperature. This work not only provides a strategy for constructing heterometallic clusters, but also shows the prospect for pursuing novel thermochromic luminescent materials by incorporating multi-congeneric metal components.

Cluster From Cluster: A Quantitative Approach to Magic Gold Nanoclusters [Au25 (SR)18 ].

High-yield and large-scale synthesis are highly demanded for the studies of gold nanoclusters. We developed a "cluster from cluster" approach to assemble gold nanoclusters with preformed atomically precise Au13 precursors. This facile approach has proved to be very effective in the synthesis of the well-known magic cluster [Au25 (SR)18 ]- , which could prepare the target cluster in high yield (overall yield up to ≈100 %) at large scale (gram-scale based on gold). This method can be applied in the synthesis of 10 Au25 clusters with different R groups. This work presents an important approach that may be extended to high-yield and large-scale synthesis of other metal nanoclusters.

Toward Long-Term Stability: Single-Crystal Alloys of Cesium-Containing Mixed Cation and Mixed Halide Perovskite.

Perovskite solar cells are strong competitors for silicon-based ones, but suffer from poor long-term stability, for which the intrinsic stability of perovskite materials is of primary concern. Herein, we prepared a series of well-defined cesium-containing mixed cation and mixed halide perovskite single-crystal alloys, which enabled systematic investigations on their structural stabilities against light, heat, water, and oxygen. Two potential phase separation processes are evidenced for the alloys as the cesium content increases to 10% and/or bromide to 15%. Eventually, a highly stable new composition, (FAPbI3)0.9(MAPbBr3)0.05(CsPbBr3)0.05, emerges with a carrier lifetime of 16 µs. It remains stable during at least 10 000 h water-oxygen and 1000 h light stability tests, which is very promising for long-term stable devices with high efficiency. The mechanism for the enhanced stability is elucidated through detailed single-crystal structure analysis. Our work provides a single-crystal-based paradigm for stability investigation, leading to the discovery of stable new perovskite materials.

Enantioselective Synthesis of Homochiral Au13 Nanoclusters and Their Chiroptical Activities.

A pair of enantiopure Au13 nanoclusters have been enantioselectively synthesized by chiral ligands with stereogenic centers at the phosphorus atoms. Their structures are determined by X-ray crystallography, which are typical models with a high symmetric core and chiral surface ligand arrangement. Correlation between the crystallographic structure, the calculation, and the circular dichroism (CD) study indicates that helical ligand arrangement inducing the core into chiral distortion accounts for the chiroptical activities in the visible region. A rare example of cocrystallization of a mixture of diastereomers has been observed for the first time for gold nanoclusters, reflecting the lack of chiral self-sorting of the ligands.

An All-Alkynyl Protected 74-Nuclei Silver(I)-Copper(I)-Oxo Nanocluster: Oxo-Induced Hierarchical Bimetal Aggregation and Anisotropic Surface Ligand Orientation.

The hardness of oxo ions (O2- ) means that coinage-metal (Cu, Ag, Au) clusters supported by oxo ions (O2- ) are rare. Herein, a novel µ4 -oxo supported all-alkynyl-protected silver(I)-copper(I) nanocluster [Ag74-x Cux O12 (PhC≡C)50 ] (NC-1, avg. x=37.9) is characterized. NC-1 is the highest nuclearity silver-copper heterometallic cluster and contains an unprecedented twelve interstitial µ4 -oxo ions. The oxo ions originate from the reduction of nitrate ions by NaBH4 . The oxo ions induce the hierarchical aggregation of CuI and AgI ions in the cluster, forming the unique regioselective distribution of two different metal ions. The anisotropic ligand coverage on the surface is caused by the jigsaw-puzzle-like cluster packing incorporating rare intermolecular C-H⋅⋅⋅metal agostic interactions and solvent molecules. This work not only reveals a new category of high-nuclearity coinage-metal clusters but shows the special clustering effect of oxo ions in the assembly of coinage-metal clusters.

Understanding the Cubic Phase Stabilization and Crystallization Kinetics in Mixed Cations and Halides Perovskite Single Crystals.

The spontaneous α-to-δ phase transition of the formamidinium-based (FA) lead halide perovskite hinders its large scale application in solar cells. Though this phase transition can be inhibited by alloying with methylammonium-based (MA) perovskite, the underlying mechanism is largely unexplored. In this Communication, we grow high-quality mixed cations and halides perovskite single crystals (FAPbI3)1-x(MAPbBr3)x to understand the principles for maintaining pure perovskite phase, which is essential to device optimization. We demonstrate that the best composition for a perfect α-phase perovskite without segregation is x = 0.1-0.15, and such a mixed perovskite exhibits carrier lifetime as long as 11.0 µs, which is over 20 times of that of FAPbI3 single crystal. Powder XRD, single crystal XRD and FT-IR results reveal that the incorporation of MA+ is critical for tuning the effective Goldschmidt tolerance factor toward the ideal value of 1 and lowering the Gibbs free energy via unit cell contraction and cation disorder. Moreover, we find that Br incorporation can effectively control the perovskite crystallization kinetics and reduce defect density to acquire high-quality single crystals with significant inhibition of δ-phase. These findings benefit the understanding of α-phase stabilization behavior, and have led to fabrication of perovskite solar cells with highest efficiency of 19.9% via solvent management.

Chloride-Promoted Formation of a Bimetallic Nanocluster Au80Ag30 and the Total Structure Determination.

We report the total structure determination of a large bimetallic nanocluster with an overall composition of [Au80Ag30(C≡CPh)42Cl9]Cl. It is the largest structurally characterized bimetallic coinage nanocluster so far. The 110 metal atoms are distributed in a concentric four-shell Russian doll arrangement, Au6@Au35@Ag30Au18@Au21. There are 42 PhC≡C- ligands and 9 µ2-chloride ligands clamping on the cluster surface. The chloride is proven to be critical for the formation of this giant cluster, as the control experiment in the absence of halide gives only smaller species. This work demonstrates that the halide can play a key role in the formation of a large metal nanocluster, and the halide effect should be considered in the design and synthesis of metal nanoclusters.

[Mn(III)Mn(IV)2Mo14O56](17-): A Mixed-Valence Meso-Polyoxometalate Anion Encapsulated by a 64-Nuclearity Silver Cluster.

A 64-nuclearity silver cluster encapsulating a unique POM anion [Mn(III)Mn(IV)2Mo14O56](17-) has been synthesized. The formation of the templating core performs a reassembly process for increasing nuclearities from {MnMo9} to {Mn3Mo14}. It represents a rare inorganic meso anion containing mixed-valent Mn that is built up by d-{Mn(IV)Mo7} and l-{Mn(IV)Mo7} units connecting together through a {Mn(III)} fragment.

Utilization of charged microdroplets for the controlled rapid synthesis of hollow sodium chloride single crystals.

Charged microdroplets are favored in microfluidic control, biomedicine, chemistry and materials processing due to their unique physicochemical environment, including interface double layers, high electric fields, surface concentration enrichment, and more. Herein, we investigated the crystallization of charged sodium chloride microdroplets and achieved the formation of hollow single crystals in a single-step process lasting only a few seconds, without the use of templates. Additionally, we discussed the plausible crystal growth mechanism, which appears to be an unconventional outward-inward growth process.

Chiroptical Activity Amplification of Chiral Metal Nanoclusters via Surface/Interface Solidification.

It remains a grand challenge to amplify the chiroptical activity of chiral metal nanoclusters (NCs) although it is desirable for fundamental research and practical application. Herein, we report a strategy of surface/interface solidification (SIS) for enhancing the chiroptical activity of gold NCs. Structural analysis of [Au19(2R,4R/2S,4S-BDPP)6Cl2]3+ (BDPP is 2,4-bis(diphenylphosphino)pentane) clusters reveals that one of the interfacial gold atoms is flexible between two sites and large space is present on the surface, thus hampering chirality transfer from surface chiral ligands to metal core and leading to low chiroptical activity. Following SIS by filling the flexible sites and replacing chlorides with thiolate ligands affords another pair of [Au20(2R,4R/2S,4S-BDPP)6(4-F-C6H4S)2]4+, which shows a more compact and organized structure and thus an almost 40-fold enhancement of chiroptical activity. This work not only provides an efficient approach for amplifying the chiroptical activity of metal nanoclusters but also highlights the significance of achiral components in shaping chiral nanostructures.

Multidentate Fullerenes Enable Tunable and Robust Interfacial Bonding for Efficient Tin-Based Perovskite Solar Cells.

Improving the efficiency of tin-based perovskite solar cells (TPSCs) is significantly hindered by energy level mismatch and weak interactions at the interface between the tin-based perovskite and fullerene-based electron transport layers (ETLs). In this study, four well-defined multidentate fullerene molecules with 3, 4, 5, and 6 diethylmalonate groups, labeled as FM3, FM4, FM5, and FM6 are synthesized, and employed as interfacial layers in TPSCs. It is observed that increasing the number of functional groups in these fullerenes leads to shallower lowest unoccupied molecular orbital (LUMO) energy levels and enhance interfacial chemical interactions. Notably, FM5 exhibits a suitable energy level and robust interaction with the perovskite, effectively enhancing electron extraction and defect passivation. Additionally, the unique molecular structure of FM5 allows the exposed carbon cage to be tightly stacked with the upper fullerene cage after interaction with the perovskite, facilitating efficient charge transfer and protecting the perovskite from moisture and oxygen damage. As a result, the FM5-based device achieves a champion efficiency of 15.05%, significantly surpassing that of the PCBM-based (11.77%), FM3-based (13.54%), FM4-based (14.34%), and FM6-based (13.75%) devices. Moreover, the FM5-based unencapsulated device exhibits excellent stability, maintaining over 90% of its initial efficiency even after 300 h of air exposure.