Metal chalcogenides for neuromorphic computing: emerging materials and mechanisms.

The approaching end of Moore's law scaling has significantly accelerated multiple fields of research including neuromorphic-, quantum-, and photonic computing, each of which possesses unique benefits unobtained through conventional binary computers. One of the most compelling arguments for neuromorphic computing systems is power consumption, noting that computations made in the human brain are approximately 106times more efficient than conventional CMOS logic. This review article focuses on the materials science and physical mechanisms found in metal chalcogenides that are currently being explored for use in neuromorphic applications. We begin by reviewing the key biological signal generation and transduction mechanisms within neuronal components of mammalian brains and subsequently compare with observed experimental measurements in chalcogenides. With robustness and energy efficiency in mind, we will focus on short-range mechanisms such as structural phase changes and correlated electron systems that can be driven by low-energy stimuli, such as temperature or electric field. We aim to highlight fundamental materials research and existing gaps that need to be overcome to enable further integration or advancement of metal chalcogenides for neuromorphic systems.

Balancing the Hydrogen Evolution Reaction, Surface Energetics, and Stability of Metallic MoS2 Nanosheets via Covalent Functionalization.

We modify the fundamental electronic properties of metallic (1T phase) nanosheets of molybdenum disulfide (MoS2) through covalent chemical functionalization, and thereby directly influence the kinetics of the hydrogen evolution reaction (HER), surface energetics, and stability. Chemically exfoliated, metallic MoS2 nanosheets are functionalized with organic phenyl rings containing electron donating or withdrawing groups. We find that MoS2 functionalized with the most electron donating functional group (p-(CH3CH2)2NPh-MoS2) is the most efficient catalyst for HER in this series, with initial activity that is slightly worse compared to the pristine metallic phase of MoS2. The p-(CH3CH2)2NPh-MoS2 is more stable than unfunctionalized metallic MoS2 and outperforms unfunctionalized metallic MoS2 for continuous H2 evolution within 10 min under the same conditions. With regards to the entire studied series, the overpotential and Tafel slope for catalytic HER are both directly correlated with the electron donating strength of the functional group. The results are consistent with a mechanism involving ground-state electron donation or withdrawal to/from the MoS2 nanosheets, which modifies the electron transfer kinetics and catalytic activity of the MoS2 nanosheet. The functional groups preserve the metallic nature of the MoS2 nanosheets, inhibiting conversion to the thermodynamically stable semiconducting state (2H) when mildly annealed in a nitrogen atmosphere. We propose that the electron density and, therefore, reactivity of the MoS2 nanosheets are controlled by the attached functional groups. Functionalizing nanosheets of MoS2 and other transition metal dichalcogenides provides a synthetic chemical route for controlling the electronic properties and stability within the traditionally thermally unstable metallic state.

Tandem Solar Cells from Solution-Processed CdTe and PbS Quantum Dots Using a ZnTe-ZnO Tunnel Junction.

We developed a monolithic CdTe-PbS tandem solar cell architecture in which both the CdTe and PbS absorber layers are solution-processed from nanocrystal inks. Due to their tunable nature, PbS quantum dots (QDs), with a controllable band gap between 0.4 and ∼1.6 eV, are a promising candidate for a bottom absorber layer in tandem photovoltaics. In the detailed balance limit, the ideal configuration of a CdTe (Eg = 1.5 eV)-PbS tandem structure assumes infinite thickness of the absorber layers and requires the PbS band gap to be 0.75 eV to theoretically achieve a power conversion efficiency (PCE) of 45%. However, modeling shows that by allowing the thickness of the CdTe layer to vary, a tandem with efficiency over 40% is achievable using bottom cell band gaps ranging from 0.68 and 1.16 eV. In a first step toward developing this technology, we explore CdTe-PbS tandem devices by developing a ZnTe-ZnO tunnel junction, which appropriately combines the two subcells in series. We examine the basic characteristics of the solar cells as a function of layer thickness and bottom-cell band gap and demonstrate open-circuit voltages in excess of 1.1 V with matched short circuit current density of 10 mA/cm2 in prototype devices.

Fast current blinking in individual PbS and CdSe quantum dots.

Fast current intermittency of the tunneling current through single semiconductor quantum dots was observed through time-resolved intermittent contact conductive atomic force microscopy in the dark and under illumination at room temperature. The current through a single dot switches on and off at time scales ranging from microseconds to seconds with power-law distributions for both the on and off times. On states are attributed to the resonant tunneling of charges from the electrically conductive AFM tip to the quantum dot, followed by transfer to the substrate, whereas off states are attributed to a Coulomb blockade effect in the quantum dots that shifts the energy levels out of resonance conditions due to the presence of the trapped charge, while at the same bias. The observation of current intermittency due to Coulomb blockade effects has important implications for the understanding of carrier transport through arrays of quantum dots.

Built-in potential and charge distribution within single heterostructured nanorods measured by scanning Kelvin probe microscopy.

The electrostatic potential distribution across single, isolated, colloidal heterostructured nanorods (NRs) with component materials expected to form a p-n junction within each NR has been measured using scanning Kelvin probe microscopy (SKPM). We compare CdS to bicomponent CdS-CdSe, CdS-PbSe, and CdS-PbS NRs prepared via different synthetic approaches to corroborate the SKPM assignments. The CdS-PbS NRs show a sharp contrast in measured potential across the material interface. We find the measured built-in potential within an individual NR to be attenuated by long-range electrostatic forces between the sample substrate, cantilever, and the measuring tip. Surface potential images were deconvoluted to yield built-in potentials ranging from 375 to 510 meV in the heterostructured NRs. We deduce the overall built-in potential as well as the charge distribution across each segment of the heterostructured NRs by combining SKPM data with simulations of the system.

Nanoscale Photoexcited Carrier Dynamics in Perovskites.

The optoelectronic properties of lead halide perovskite thin films can be tuned through compositional variations and strain, but the associated nanocrystalline structure makes it difficult to untangle the link between composition, processing conditions, and ultimately material properties and degradation. Here, we study the effect of processing conditions and degradation on the local photoconductivity dynamics in [(CsPbI3)0.05(FAPbI3)0.85(MAPbBr3)0.15] and (FA0.7Cs0.3PbI3) perovskite thin films using temporally and spectrally resolved microwave near-field microscopy with a temporal resolution as high as 5 ns and a spatial resolution better than 50 nm. For the latter FACs formulation, we find a clear effect of the process annealing temperature on film morphology, stability, and spatial photoconductivity distribution. After exposure of samples to ambient conditions and illumination, we find spectral evidence of halide segregation-induced degradation below the instrument resolution limit for the mixed halide formulation, while we find a clear spatially inhomogeneous increase in the carrier lifetime for the FACs formulation annealed at 180 °C.

Spatially Resolved Persistent Photoconductivity in MoS2-WS2 Lateral Heterostructures.

The optical and electronic properties of 2D semiconductors are intrinsically linked via the strong interactions between optically excited bound species and free carriers. Here we use near-field scanning microwave microscopy (SMM) to image spatial variations in photoconductivity in MoS2-WS2 lateral multijunction heterostructures using photon energy-resolved narrowband illumination. We find that the onset of photoconductivity in individual domains corresponds to the optical absorption onset, confirming that the tightly bound excitons in transition metal dichalcogenides can nonetheless dissociate into free carriers. These photogenerated carriers are most likely n-type and are seen to persist for up to days. Informed by finite element modeling we reveal that they can increase the carrier density by up to 200 times. This persistent photoconductivity appears to be dominated by contributions from the multilayer MoS2 domains, and we attribute the flake-wide response in part to charge transfer across the heterointerface. Spatial correlation of our SMM imaging with photoluminescence (PL) mapping confirms the strong link between PL peak emission photon energy, PL intensity, and the local accumulated charge. This work reveals the spatially and temporally complex optoelectronic response of these systems and cautions that properties measured during or after illumination may not reflect the true dark state of these materials but rather a metastable charged state.

Disentangling oxygen and water vapor effects on optoelectronic properties of monolayer tungsten disulfide.

By understanding how the environmental composition impacts the optoelectronic properties of transition metal dichalcogenide monolayers, we demonstrate that simple photoluminescence (PL) measurements of tungsten disulfide (WS2) monolayers can differentiate relative humidity environments. In this paper, we examine the PL and photoconductivity of chemical vapor deposition grown WS2 monolayers under three carefully controlled environments: inert gas (N2), dry air (O2 in N2), and humid nitrogen (H2O vapor in N2). The WS2 PL is measured as a function of 532 nm laser power and exposure time and can be decomposed into the exciton, trion, and lower energy state(s) contributions. Under continuous illumination in either O2 or H2O vapor environment, we find dramatic (and reversible) increases in PL intensity relative to the PL in an inert environment. The PL bathochromically shifts in an O2 environment and is dominated by increased trion emission and diminished exciton emission. In contrast, the WS2 PL increase in a H2O environment results from an overall increase in emission from all spectral components where the exciton contribution dominates. The drastic increases in PL are anticorrelated with corresponding decreases in photoconductivity, as measured by time-resolved microwave conductivity. The results suggest that both O2 and H2O react photochemically with the WS2 monolayer surface, modifying the optoelectronic properties, but do so via distinct pathways. Thus, we use these optoelectronic differences to differentiate the amount of humidity in the air, which we show with 0%, 40%, and 80% relative humidity environments. This deeper understanding of how ambient conditions impact WS2 monolayers enables novel humidity sensors as well as a better understanding of the correlation between TMDC surface chemistry, light emission, and photoconductivity. Moreover, these WS2 measurements highlight the importance of considering the impact of the local environment on reported results.

Slow charge transfer from pentacene triplet states at the Marcus optimum.

Singlet fission promises to surpass the Shockley-Queisser limit for single-junction solar cell efficiency through the production of two electron-hole pairs per incident photon. However, this promise has not been fulfilled because singlet fission produces two low-energy triplet excitons that have been unexpectedly difficult to dissociate into free charges. To understand this phenomenon, we study charge separation from triplet excitons in polycrystalline pentacene using an electrochemical series of 12 different guest electron-acceptor molecules with varied reduction potentials. We observe separate optima in the charge yield as a function of driving force for singlet and triplet excitons, including inverted regimes for the dissociation of both states. Molecular acceptors can thus provide a strategic advantage to singlet fission solar cells by suppressing singlet dissociation at optimal driving forces for triplet dissociation. However, even at the optimal driving force, the rate constant for charge transfer from the triplet state is surprisingly small, ~107 s-1, presenting a previously unidentified obstacle to the design of efficient singlet fission solar cells.

Identifying reactive intermediates in the Ullmann coupling reaction by scanning tunneling microscopy and spectroscopy.

We present an atomic-scale study of substituent effects in the Ullmann coupling reaction on Cu{111} using low-temperature scanning tunneling microscopy and spectroscopy. We have observed fluorophenyl intermediates and phenyl intermediates as well as biphenyl products on Cu{111} after exposure to 4-fluoro-1-bromobenzene (p-FC(6)H(4)Br) and bromobenzene (C(6)H(5)Br), respectively. When p-FC(6)H(4)Br dissociatively chemisorbs at 298 K on Cu{111}, the relatively weakly bound Br dissociates, and fluorophenyl intermediates are formed. These intermediates couple to form 4,4'-difluorobiphenyl and desorb at temperatures below 370 K. However, by cooling the substrate to low temperature (4 K), we have observed unreacted fluorophenyl intermediates distributed randomly on terraces and at step edges of the Cu{111} surface. Alternatively, at similar coverages of C(6)H(5)Br, we have observed biphenyl distributed on terraces and step edges. In each case, Br adatoms were randomly distributed on the surface. Chemical identification of fluorophenyl and phenyl intermediates and biphenyl products was achieved by vibrational spectroscopy via inelastic tunneling spectroscopy. The strongest vibrational mode in the phenyl species disappears when the tilted intermediates couple to form biphenyl products. We infer that the surface normal component of the dipole moment is important in determining the transition strength in inelastic electron tunneling spectroscopy.

Effect of Crystallographic Orientation and Nanoscale Surface Morphology on Poly-Si/SiOx Contacts for Silicon Solar Cells.

High-efficiency crystalline silicon (Si) solar cells require textured surfaces for efficient light trapping. However, passivation of a textured surface to reduce carrier recombination is difficult. Here, we relate the electrical properties of cells fabricated on a KOH-etched, random pyramidal-textured Si surface to the nanostructure of the passivated contact and the textured surface morphology. The effects of both microscopic pyramidal morphology and nanoscale surface roughness on passivated contacts consisting of polycrystalline Si (poly-Si) deposited on top of an ultrathin, 1.5-2.2 nm, SiOx layer are investigated. Using atomic force microscopy, we show a pyramid face, which is predominantly a Si(111) plane to be significantly rougher than a polished Si(111) surface. This roughness results in a nonuniform SiOx layer as determined by transmission electron microscopy of a poly-Si/SiOx contact. Our device measurements also show an overall more resistive and hence a thicker SiOx layer over the pyramidal surface as compared to a polished Si(111) surface, which we relate to increased surface roughness. Using electron-beam-induced current measurements of poly-Si/SiOx contacts, we further show that the SiOx layer near the pyramid valleys is preferentially more conducting and hence likely thinner than over pyramid tips, edges, and faces. Hence, both the microscopic pyramidal morphology and nanoscale roughness lead to a nonuniform SiOx layer, thus leading to poor poly-Si/SiOx contact passivation. Finally, we report >21% efficient and ≥80% fill-factor front/back poly-Si/SiOx solar cells on both single-side and double-side textured wafers without the use of transparent conductive oxide layers, and show that the poorer contact passivation on a textured surface is limited to boron-doped poly-Si/SiOx contacts.

The existence and impact of persistent ferroelectric domains in MAPbI3.

Methylammonium lead iodide (MAPbI3) exhibits exceptional photovoltaic performance, but there remains substantial controversy over the existence and impact of ferroelectricity on the photovoltaic response. We confirm ferroelectricity in MAPbI3 single crystals and demonstrate mediation of the electronic response by ferroelectric domain engineering. The ferroelectric response sharply declines above 57°C, consistent with the tetragonal-to-cubic phase transition. Concurrent band excitation piezoresponse force microscopy-contact Kelvin probe force microscopy shows that the measured response is not dominated by spurious electrostatic interactions. Large signal poling (>16 V/cm) orients the permanent polarization into large domains, which show stabilization over weeks. X-ray photoemission spectroscopy results indicate a shift of 400 meV in the binding energy of the iodine core level peaks upon poling, which is reflected in the carrier concentration results from scanning microwave impedance microscopy. The ability to control the ferroelectric response provides routes to increase device stability and photovoltaic performance through domain engineering.

Efficiency of Charge-Transfer Doping in Organic Semiconductors Probed with Quantitative Microwave and Direct-Current Conductance.

Although molecular charge-transfer doping is widely used to manipulate carrier density in organic semiconductors, only a small fraction of charge carriers typically escape the Coulomb potential of dopant counterions to contribute to electrical conductivity. Here, we utilize microwave and direct-current (DC) measurements of electrical conductivity to demonstrate that a high percentage of charge carriers in redox-doped semiconducting single-walled carbon nanotube (s-SWCNT) networks is delocalized as a free carrier density in the π-electron system (estimated as >46% at high doping densities). The microwave and four-point probe conductivities of hole-doped s-SWCNT films quantitatively match over almost 4 orders of magnitude in conductance, indicating that both measurements are dominated by the same population of delocalized carriers. We address the relevance of this surprising one-to-one correspondence by discussing the degree to which local environmental parameters (e.g., tube-tube junctions, Coulombic stabilization, and local bonding environment) may impact the relative magnitudes of each transport measurement.

Dynamics and spectroscopy of hydrogen atoms on Pd{111}.

Chemisorption of hydrogen on Pd{111} is a relatively simple, yet important surface chemical process. By using low-temperature scanning tunneling microscopy, tip-induced motion of adsorbed atomic hydrogen at 4 K has been observed at low coverage. The motion has been ascribed to excitation of vibrational modes that decay into translational modes; vibrational spectroscopy via inelastic electron tunneling corroborates this assignment, and the barrier to hydrogen atom motion has been determined. At higher coverages, tip-induced motion of vacancies in the hydrogen overlayer is observed, and the associated barrier has also been determined.

Covalently Bound Nitroxyl Radicals in an Organic Framework.

A series of covalent organic framework (COF) structures is synthesized that possesses a tunable density of covalently bound nitroxyl radicals within the COF pores. The highest density of organic radicals produces an electron paramagnetic resonance (EPR) signal that suggests the majority of radicals strongly interact with other radicals, whereas for smaller loadings the EPR signals indicate the radicals are primarily isolated but with restricted motion. The dielectric loss as determined from microwave absorption of the framework structures compared with an amorphous control suggests that free motion of the radicals is inhibited when more than 25% of available sites are occupied. The ability to tune the mode of radical interactions and the subsequent effect on redox, electrical, and optical characteristics in a porous framework may lead to a class of structures with properties ideal for photoelectrochemistry or energy storage.

Carrier separation and transport in perovskite solar cells studied by nanometre-scale profiling of electrical potential.

Organometal-halide perovskite solar cells have greatly improved in just a few years to a power conversion efficiency exceeding 20%. This technology shows unprecedented promise for terawatt-scale deployment of solar energy because of its low-cost, solution-based processing and earth-abundant materials. We have studied charge separation and transport in perovskite solar cells-which are the fundamental mechanisms of device operation and critical factors for power output-by determining the junction structure across the device using the nanoelectrical characterization technique of Kelvin probe force microscopy. The distribution of electrical potential across both planar and porous devices demonstrates p-n junction structure at the TiO2/perovskite interfaces and minority-carrier diffusion/drift operation of the devices, rather than the operation mechanism of either an excitonic cell or a p-i-n structure. Combining the potential profiling results with solar cell performance parameters measured on optimized and thickened devices, we find that carrier mobility is a main factor that needs to be improved for further gains in efficiency of the perovskite solar cells.

Heads and tails: simultaneous exposed and buried interface imaging of monolayers.

We have simultaneously imaged the chemically bound head groups and exposed tail groups in bicomponent alkanethiolate self-assembled monolayers on Au{111} with molecular resolution. This has enabled us to resolve the controversy of scanning tunneling microscopy image interpretation and to measure the molecular polar tilt and azimuthal angles. Our local measurements demonstrate that ordered domains with different superstructures also have varied buried sulfur head group structures.

Long-range electronic interactions at a high temperature: bromine adatom islands on Cu(111).

Long-range electronic interactions between Br adatom islands, which are formed at approximately 600 K, on Cu(111) are mediated by substrate surface-state electrons at that elevated temperature. Using scanning tunneling microscopy at 4 K, we have quantified nearest neighbor island separations and found favored spacings to be half-multiples of the Fermi wavelength of Cu(111). The strong interaction potential and decay length of the interisland interactions are discussed in terms of the interaction of Br with the substrate surface state.

Spectral diffusion in the tunneling spectra of ligand-stabilized undecagold clusters.

We report diffusion in the tunneling spectra of isolated, ligand-stabilized undecagold (Au11) clusters immobilized by attachment to alpha,omega-alkanedithiolate tethers inserted into alkanethiolate self-assembled monolayers. We use scanning tunneling microscopy and spectroscopy at cryogenic (UHV, 4 K) conditions to measure these clusters' conductance with complete control of their chemical and physical environment; additionally, thermal broadening of their electronic states as well as their mobility is minimized. At low temperature, the Au11 clusters demonstrate Coulomb blockade behavior, with zero-conductance gaps resulting from quantum size effects. Surprisingly, chemically identical and even single particles produced different families of tunneling spectra, comparable to previous results for heterogeneous distributions of particles. We hypothesize that, while these particles are chemically attached to the surface of the SAM for measurement, these assemblies may still be sufficiently dynamic to affect their transport properties significantly.