RESUMO
We investigated the application of cheap but efficient sepiolite for the removal of phosphate and the use of phosphate-adsorbed sepiolite for rice cultivation. Sepiolite was calcined under different temperatures to improve its phosphate adsorption capacity; the sepiolite calcined at 950 °C (950-SPL) was found to have highest adsorption capacity. As the calcination temperature increased, the amount of Ca eluted from sepiolite also increased, resulting in the formation of Ca-P precipitates. Phosphate adsorption on 950-SPL reached equilibrium within 12 h. Both the Langmuir and Freudlich models were not well-fitted to the equilibrium adsorption model because phosphate at initial concentration was fully removed by 950-SPL. The maximum adsorption capacity of 950-SPL with respect to phosphate was 172.34 mg/g. The phosphate adsorption of 950-SPL was endothermic and spontaneous. Phosphate adsorption at pH 3 was two times higher than at pH 11. The presence of bicarbonate significantly influenced the decrease of phosphate by 950-SPL. A breakthrough of column packed with 950-SPL/sand was not observed during >200 h. The phosphate fraction in 950-SPL was mainly composed of apatite-P and residual fraction. A toxicity test using Daphnia magna showed that the toxic units of 950-SPL corresponded to no acute toxicity. Tiller number, shoot height, shoot dry weight and total dry weight were significantly higher in P-adsorbed 950-SPL application than control. It can be concluded that calcined sepiolite can be effective in the removal of phosphate and that the sepiolite after phosphate adsorption can be used as a P fertilizer in soil.