Circularly Polarized Light-Induced Chiral Growth of Achiral Plasmonic Nanoparticles Dispersed in a Solution.

Plasmonic nanoparticles (NPs) with chiral geometries have wide applications from chiral molecular sensing to enantioselective catalysis. The synthesis of chiral plasmonic nanoparticles using circularly polarized light (CPL) has attracted a considerable amount of attention because it eliminates the need for chiral molecules. However, NPs need to be immobilized on a solid substrate during synthesis. Here, we successfully synthesized colloidal chiral plasmonic NPs by depositing silver on the surface of achiral gold nanoparticles dispersed in a solution using CPL. Circular dichroism (CD) signals corresponding to the handedness of the irradiated CPL were observed when gold nanorods or gold nanotriangles were used. In contrast, no clear CD signal was observed when gold nanospheres were used. The morphological anisotropy of the gold nanoparticles was a key factor in the synthesis of chiral plasmonic nanoparticles using CPL. Furthermore, we demonstrated the tuning of chiroptical properties according to the CPL wavelength.

Emerging Atomic Energy Levels in Zero-Dimensional Silicon Quantum Dots.

Driven by the emergence of colloidal semiconductor quantum dots (QDs) of tunable emission wavelengths, characteristic of exciton absorption peaks, outstanding photostability and solution processability in device fabrication have become a key tool in the development of nanomedicine and optoelectronics. Diamond cubic crystalline silicon (Si) QDs, with a diameter larger than 2 nm, terminated with hydrogen atoms are known to exhibit bulk-inherited spin and valley properties. Herein, we demonstrate a newly discovered size region of Si QDs, in which a fast radiative recombination on the order of hundreds of picoseconds is responsible for photoluminescence (PL). Despite retaining a crystallographic structure like the bulk, controlling their diameters in the 1.1-1.7 nm range realizes the strong PL with continuous spectral tunability in the 530-580 nm window, the narrow spectral line widths without emission tails, and the fast relaxation of photogenerated carriers. In contrast, QDs with diameters greater than 1.8 nm display the decay times on the microsecond order as well as the previous Si QDs. In addition to the five-orders-of-magnitude variation in the PL decay time, a systematic study on the temperature dependence of PL properties suggests that the energy structure of the smaller QDs does not retain an indirect band gap character. It is discussed that a 1.7 nm diameter is critical to undergo changes in energy structure from bulky to molecular configurations.

Control of the spatial distribution and crystal orientation of self-organized Au nanoparticles.

Ordered, two-dimensional, self-organized Au nanoparticles were fabricated using radiofrequency (RF) magnetron sputtering. The particles were uniformly spherical in shape and ultrafine in size (3-7 nm) and showed an ultrahigh density in the order of ∼10(12) inch(-2). A custom-developed sputtering apparatus that employs low sputtering power density and a minimized sputtering time (1 min) was used to markedly simplify the preparation conditions for Au nanoparticle fabrication. The spatial distribution of Au nanoparticles was rigorously controlled by placing a Ta interfacial layer between the Au nanoparticles and substrate as well as by post-annealing samples in an Ar atmosphere after the formation of Au nanoparticles. The interfacial layer and the post-annealing step caused approximately 40% of the Au nanoparticles on the substrate surface to orient in the (111) direction. This method was shown to produce ultrafine Au nanoparticles showing an ultrahigh surface density. The crystal orientation of the nanoparticles can be precisely controlled with respect to the substrate surface. Therefore, this technique promises to deliver tunable nanostructures for applications in the field of high-performance electronic devices.

Synthesis, crystal structure, and electronic properties of high-pressure PdF2-type oxides MO2 (M = Ru, Rh, Os, Ir, Pt).

The polycrystalline MO2's (HP-PdF2-type MO2, M = Rh, Os, Pt) with high-pressure PdF2 compounds were successfully synthesized under high-pressure conditions for the first time, to the best of our knowledge. The crystal structures and electromagnetic properties were studied. Previously unreported electronic properties of the polycrystalline HP-PdF2-type RuO2 and IrO2 were also studied. The refined structures clearly indicated that all compounds crystallized into the HP-PdF2-type structure, M(4+)O(2-)2, rather than the pyrite-type structure, M(n+)(O2)(n-) (n < 4). The MO2 compounds (M = Ru, Rh, Os, Ir) exhibited metallic conduction, while PtO2 was highly insulating, probably because of the fully occupied t2g band. Neither superconductivity nor a magnetic transition was detected down to a temperature of 2 K, unlike the case of 3d transition metal chalcogenide pyrites.

Synthesis of highly strained mesostructured SrTiO(3)/BaTiO(3) composite films with robust ferroelectricity.

A new class of highly stable ferroelectric material, that is, a mesostructured SrTiO(3)/BaTiO(3) composite film, obtained by a surfactant-templated sol-gel method is reported. Due to the concave surface geometry and abundant hetero-interface between SrTiO(3) (ST) and BaTiO(3) (BT) phases, a large number of strains can be created in the composite film, thereby leading to dramatic enhancement of ferroelectric property (see scheme).

Destabilization of Sn2+ 5s2 Lone-Pair States of SnO through Dimensional Crossover.

Materials exhibiting unique electronic properties arising from a characteristic crystal structure have physical properties that are sensitive to structural dimensionality. This study involves the destabilization of Sn 5s2 lone-pair states of SnO films by decreasing their structural dimensionality in the out-of-plane direction. The inherent dispersive band structure of the SnO films remained unchanged between 80 and 11 nm. Below 11 nm, their dispersive band structure disappeared, the O/Sn ratio increased, and the carrier type changed from the p type to the n type, whereas the Sn valency remained constant at +2. These unconventional changes arose from the electronic separation corresponding to the Debye length, which is proportional to permittivity, and were attributed to weakened interactions between Sn 5s2 lone-pair electrons. Therefore, designing low-permittivity materials is beneficial for reducing the crystallite size required for stabilizing lone-pair states. These results are essential for designing emergent p-type oxides and improving their semiconducting properties and performance in transparent or high-power electronics.

Electrochemical synthesis of mesoporous Pt-Au binary alloys with tunable compositions for enhancement of electrochemical performance.

Mesoporous Pt-Au binary alloys were electrochemically synthesized from lyotropic liquid crystals (LLCs) containing corresponding metal species. Two-dimensional exagonally ordered LLC templates were prepared on conductive substrates from diluted surfactant solutions including water, a nonionic surfactant, ethanol, and metal species by drop-coating. Electrochemical synthesis using such LLC templates enabled the preparation of ordered mesoporous Pt-Au binary alloys without phase segregation. The framework composition in the mesoporous Pt-Au alloy was controlled simply by changing the compositional ratios in the precursor solution. Mesoporous Pt-Au alloys with low Au content exhibited well-ordered 2D hexagonal mesostructures, reflecting those of the original templates. With increasing Au content, however, the mesostructural order gradually decreased, thereby reducing the electrochemically active surface area. Wide-angle X-ray diffraction profiles, X-ray photoelectron spectra, and elemental mapping showed that both Pt and Au were atomically distributed in the frameworks. The electrochemical stability of mesoporous Pt-Au alloys toward methanol oxidation was highly improved relative to that of nonporous Pt and mesoporous Pt films, suggesting that mesoporous Pt-Au alloy films are potentially applicable as electrocatalysts for direct methanol fuel cells. Also, mesoporous Pt-Au alloy electrodes showed a highly sensitive amperometric response for glucose molecules, which will be useful in next-generation enzyme-free glucose sensors.

Fullerene/cobalt porphyrin hybrid nanosheets with ambipolar charge transporting characteristics.

A novel supramolecular nanoarchitecture, comprising C(60)/Co porphyrin nanosheets, was prepared by a simple liquid-liquid interfacial precipitation method and fully characterized by means of optical microscopy, AFM, STEM, TEM, and XRD. It is established that the highly crystalline C(60)/Co porphyrin nanosheets have a simple (1:1) stoichiometry, and when incorporated in bottom-gate, bottom-contact field-effect transistors (FETs), they show ambipolar charge transport characteristics.

Electrochemical design of mesoporous Pt-Ru alloy films with various compositions toward superior electrocatalytic performance.

Mesoporous Pt-Ru alloy films with various compositions were synthesized by electrochemical plating in an aqueous surfactant solution. After the removal of surfactants, continuous mesoporous Pt-Ru alloy films possessing uniform mesopores with diameter about 7 nm were obtained. The Ru content in the films could be controlled from 0 to 13 at % by changing the precursor compositions. For all the films, the mesostructural periodicities and the mesopore sizes in the films were not changed. Due to the mesoporous structure and the doped Ru content, our mesoporous Pt-Ru films showed superior electrocatalytic activity for methanol oxidation reaction in comparison with the commercially available Pt catalyst.

Direct synthesis of spatially-controlled Pt-on-Pd bimetallic nanodendrites with superior electrocatalytic activity.

Here we report a facile synthesis of Pt-on-Pd bimetallic nanodendrites with a Pd interior and dendritic Pt exterior. The developed route rationally utilizes the spontaneous separation of the depositions of Pd and Pt, which endows direct formation of Pt-on-Pd nanodendrites. This is a truly simple and unique process that is quite different from the traditional seed-mediated growth strategy. Fine-tuning of the Pt and Pd ratios afforded Pt-on-Pd nanodendrites with superior electrocatalytic activity in comparison with commercial Pt electrocatalysts.

Synthesis of continuous mesoporous Ga-doped titania films with anatase crystallized framework.

Here we report synthesis of ordered mesoporous titania films with various amounts of Ga content. The influence of Ga contents on mesostructural ordering, surface morphology, thermal stability, and anatase crystallinity is carefully investigated, by using grazing incidence small angle X-ray scattering (GISAXS), transmission electron microscopy (TEM), field emission scanning electron microscopy (FE-SEM), and Raman spectroscopy. The presence of highly dispersed Ga contents in the titania frameworks can promote the thermal stability of mesoporous titania structures, resulting that the anatase crystallization successfully proceeds without collapse of mesostructures.

Mesoporous Co3O4 for low temperature CO oxidation: effect of calcination temperatures on their catalytic performance.

Mesoporous Co3O4 particles are prepared by using mesoporous silica KIT-6 (with double gyroid Ia-3d symmetry) as a hard-template and Co(No3)2 x 6H2O as an inorganic precursor. In the former section, we investigate the effect of the calcination temperatures at which the Co salts are converted into Co3O4 inside the mesopores on the textural parameters of the products. The results of N2 adsorption-desorption analysis indicates that the calcination temperatures do not obviously affect the textural parameters such as the surface areas and pore volumes. However, when the calcination temperature reaches 800 degrees C, the mesostructural ordering is dramatically decreased, resulting in the reduction of the surface areas and pore volumes. After 800 degrees C calcination, the formation of large Co3O4 grains is partially confirmed on the particle surface by SEM observation. The grain size is much larger than the mesopore size of the original KIT-6, meaning the crystal growth is continuously occurred by breaking the rigid silica frameworks. In the latter section, we discuss the effect of the calcination temperatures and textural parameters on the catalytic activity for CO oxidation by both steady state and kinetic measurements. All mesoporous Co3O4 particles show a high catalytic activity, for example, -72 degrees C for sample calcined at 450 degrees C. Only 10 degrees C difference in T50 (the temperature of 50% conversion of CO) is found between the samples with the highest and lowest catalytic activity. The values of activation energy (Ea) and pre-exponential factor (A) per unit area are almost the same between two samples calcined at 450 degrees C and 800 degrees C. It is demonstrated that calcination process can not alter the essential catalytic property of mesoporous Co3O4 particles.

Block-copolymer-assisted synthesis of hydroxyapatite nanoparticles with high surface area and uniform size.

We report the synthesis of hydroxyapatite nanoparticles (HANPs) by the coprecipitation method using calcium D-gluconate and potassium hydrogen phosphate as the sources of calcium and phosphate ions, respectively, and the triblock copolymer F127 as a stabilizer. The HANPs were characterized using scanning electron microscopy, x-ray diffraction, and nitrogen adsorption/desorption isotherms. Removal of F127 by solvent extraction or calcination alters the structure of HANPs. The solvent-extracted HANPs were single crystals with their 〈001〉 axis oriented along the rod axis of the HANP, whereas the calcined HANPs contained two crystal phases that resulted in a spherical morphology. The calcined HANPs had much higher surface area (127 m2 g-1) than the solvent-extracted HANPs (44 m2 g-1).

Semiconductor nanochannels in metallic carbon nanotubes by thermomechanical chirality alteration.

Carbon nanotubes have a helical structure wherein the chirality determines whether they are metallic or semiconducting. Using in situ transmission electron microscopy, we applied heating and mechanical strain to alter the local chirality and thereby control the electronic properties of individual single-wall carbon nanotubes. A transition trend toward a larger chiral angle region was observed and explained in terms of orientation-dependent dislocation formation energy. A controlled metal-to-semiconductor transition was realized to create nanotube transistors with a semiconducting nanotube channel covalently bonded between a metallic nanotube source and drain. Additionally, quantum transport at room temperature was demonstrated for the fabricated nanotube transistors with a channel length as short as 2.8 nanometers.

Microwave-assisted rapid synthesis of platinum nanoclusters with high surface area.

Synthesis of platinum nanoclusters (PNCs), with its advantages of high surface area and reduced materials costs, represents a greatly interesting class of nanomaterials. In this paper, a one-step, rapid and efficient aqueous-phase reaction to straightforwardly produce PNCs in high yield is proposed without the need for any organic solvent, template or ion replacement, which is carried out simply by microwave-assisted heat-treatment of an aqueous solution containing K2PtCl4 and 2-[4-(2-hydroxyethyl)-1-piperazinyl]ethanesulfonicacid (HEPES) within 12 s. As-prepared platinum nanoclusters are porous interconnected nanostructures and possess very high surface area (41 m2 g(-1)). The combination of high surface area with the nanoarchitectures consisting of pores of the product is advantageous for catalytic applications.

Electrical conduction and field emission of a single-crystalline GdB44Si2 nanowire.

The electronic transport and field emission properties of a single-crystalline GdB44Si2 nanowire are studied. The atomic structure and elemental composition of the GdB44Si2 nanowire are characterized by transmission electron microscopy (TEM) using atomic imaging, energy-dispersive X-ray spectroscopy (EDS), and electron energy-loss spectroscopic (EELS) mapping. The electrical conductivity of the single GdB44Si2 nanowire is in the range of 46.8-60.1 S m-1. The in situ TEM field emission measurement reveals that it has a low work function of 2.4 eV. To realize a converged electron emission, a field evaporation pretreatment was used to clean the emission surface and to make a sharpened tip. The field emission probe measurement results show that the electron emission from the sharp GdB44Si2 nanowire is converged to a single field emission spot and it has a work function of 2.6 eV which is in agreement with the in situ TEM measurement. The stability of field emission current is also very good with a fluctuation of 1.4% in 20 min. With a low work function and stable emission current, the GdB44Si2 nanowire shows great promise for field emission applications.

Preparation and optical properties of fullerene/ferrocene hybrid hexagonal nanosheets and large-scale production of fullerene hexagonal nanosheets.

The supramolecular nanoarchitectures, C(60)/ferrocene nanosheets, were prepared by a simple liquid-liquid interfacial precipitation method and fully characterized by means of SEM, STEM, HRTEM, XRD, Raman and UV-vis-NIR spectra. The highly crystallized C(60)/ferrocene hexagonal nanosheets had a size of ca. 9 microm and the formulation C(60)(ferrocene)(2). A strong charge-transfer (CT) band between ferrocene and C(60) was observed at 782 nm, indicating the presence of donor-acceptor interaction in the nanosheets. Upon heating the nanosheets to 150 degrees C, the CT band disappeared due to the sublimation of ferrocene from the C(60)/ferrocene hybrid, and C(60) nanosheets with an fcc crystal structure and the same shape and size as the C(60)/ferrocene nanosheets were obtained.

Graphene composites with dental and biomedical applicability.

Pure graphene in the form of few-layer graphene (FLG) - 1 to 6 layers - is biocompatible and non-cytotoxic. This makes FLG an ideal material to incorporate into dental polymers to increase their strength and durability. It is well known that graphene has high mechanical strength and has been shown to enhance the mechanical, physical and chemical properties of biomaterials. However, for commercial applicability, methods to produce larger than lab-scale quantities of graphene are required. Here, we present a simple method to make large quantities of FLG starting with commercially available multi-layer graphene (MLG). This FLG material was then used to fabricate graphene dental-polymer composites. The resultant graphene-modified composites show that low concentrations of graphene (ca. 0.2 wt %) lead to enhanced performance improvement in physio-mechanical properties - the mean compressive strength increased by 27% and the mean compressive modulus increased by 22%. Herein we report a new, cheap and simple method to make large quantities of few-layer graphene which was then incorporated into a common dental polymer to fabricate graphene-composites which shows very promising mechanical properties.

Chirality transitions and transport properties of individual few-walled carbon nanotubes as revealed by in situ TEM probing.

Physical properties of carbon nanotubes (CNTs) are closely related to the atomic structure, i.e. the chirality. It is highly desirable to develop a technique to modify their chirality and control the resultant transport properties. Herein, we present an in situ transmission electron microscopy (TEM) probing method to monitor the chirality transition and transport properties of individual few-walled CNTs. The changes of tube structure including the chirality are stimulated by programmed bias pulses and associated Joule heating. The chirality change of each shell is analyzed by nanobeam electron diffraction. Supported by molecular dynamics simulations, a preferred chirality transition path is identified, consistent with the Stone-Wales defect formation and dislocation sliding mechanism. The electronic transport properties are measured along with the structural changes, via fabricating transistors using the individual nanotubes as the suspended channels. Metal-to-semiconductor transitions are observed along with the chirality changes as confirmed by both the electron diffraction and electrical measurements. Apart from providing an alternative route to control the chirality of CNTs, the present work demonstrates the rare possibility of obtaining the dynamic structure-properties relationships at the atomic and molecular levels.