RESUMO
A computational and spectroscopic analysis of weakly bound complexes of 1:1 γ-butyrolactone with water has been completed. In this work, multiple density-functional theories and perturbation theory were used to explore the energy-landscape of the complex. Four unique structures were identified in this analysis. One structure was characterized by the formation of a water to carbonyl hydrogen bond and the other three were formed from water to ester hydrogen bonds. The carbonyl-bound conformation was found to be the global minimum across a comprehensive panel of calculations. A wave function analysis demonstrated that the structures were additionally stabilized by weak van der Waals interactions. FTIR spectroscopy of matrix-isolated samples indicated the presence of at least two of the calculated geometries. The structures were identified to be a carbonyl-bound and at least one ester-bound structure. The transitions identified for the carbonyl-bound complex were noted to be significantly more intense than those of the ester bound, indicating greater prevalence in the matrix.
RESUMO
An analysis of the 1:1 complex of thiophene and water is presented. In this study, computation and matrix isolation Fourier transform infrared spectroscopy (FTIR) were used to determine stable complexes of thiophene and water. Computational studies found six, low-energy complexes that were differentiated by the interaction present. Three complexes were characterized by C-H···O interactions, one by O-H···S, one by O-H···π, and one with an unusual, dual interaction of O-H···S and C-H···O. The O-H···π interaction was found to have the lowest overall energy at multiple levels of theory (B3LYP, B3LYP-GD3BJ, B97-D3, M05-2X, ωB97X-D, and MP2). Analysis of matrix isolation FTIR spectra indicated that the primary experimental geometry was a complex where water interacts through C-H···O at the α carbon position of the thiophene ring. This experimental result is not in line with other related complexes (furan:water and thiophene:methanol) where the complex formed through more standard interactions (e.g., O-H···O and O-H···π). These atypical differences are explored in our findings.
RESUMO
An analysis of the 1:1 complex of furan and water is presented. In this study, computation and matrix isolation FTIR were used to determine stable complexes of furan:water. Density functional theory and Møller-Plesset second-order, perturbation theory calculations found four, unique geometries for the complex. Two complexes were characterized by C-H···O interactions, one complex was characterized by O-H···O, and the fourth complex was characterized by O-H···π. Optimizations completed using B3LYP, B3LYP-GD3BJ, M05-2X, and MP2 showed the most stable species to be bound by O-H···O interactions. Matrix isolation experiments of mixtures of furan and water held in nitrogen at 15 K showed evidence of stable complexes when probed by FTIR. These signatures grew in intensity when matrices were annealed at 30 K. These vibrational features were predominately associated with perturbation of the water monomer. Additionally, the spectra of complexes containing water isotopologues were recorded. Analysis of spectral features pointed to the presence of a single geometry formed in the matrix, which is best described as a 1:1 complex stabilized by a O-H···O interaction.
RESUMO
The jet-cooled fluorescence spectroscopy of the natural product molecule anethole ((E)-1-methoxy-4-(1-propenyl)benzene) has been studied. Single vibronic level fluorescence spectroscopy was used to verify the existence of two rotamers, syn and anti, with electronic origins at 32,889 and 32,958 cm(-1), respectively. The excitation and emission spectra show characteristics similar to those of styrene and styrene derivatives, including Cs symmetry and low amplitude motions of the propenyl (vinyl) group. As in styrene, the low amplitude modes show substantial Duschinsky mixing. Interestingly, the methoxy group shows very little activity in the spectroscopy of anethole but is found to influence the activity of the propenyl group. This activity is easily observed in the Franck-Condon activity of the propenyl-bending mode. Differences are explained using simple molecular orbital arguments. The observed torsional structure was modeled and compared to ab initio calculations, allowing us to determine a barrier to internal rotation of 623 cm(-1) for the propenyl group, in agreement with similar molecules. Calculated potential energy surfaces (using density functional theory) were used to construct a more complete representation of the torsion surface of anethole, incorporating the torsions of both substituents. Several anomalous features of the excitation spectra were assigned to van der Waals clusters of anethole with water. The assignments and analyses presented here are also consistent with density function calculations.
Assuntos
Anisóis/química , Produtos Biológicos/química , Derivados de Alilbenzenos , Teoria Quântica , Espectrometria de FluorescênciaRESUMO
Including patient advocates in basic cancer research ensures that breast cancer research is intentional, supports effective communication with broader audiences, and directly connects researchers with those who they are striving to help. Despite this utility, many cancer research scientists do not work with patient advocates. To understand barriers to engagement and build a framework for enhanced interactions in the future, we hosted a workshop with patient advocates and researchers who do engage, then discussed findings at an international metastatic breast cancer conference to solicit additional feedback and suggestions. Findings demonstrate that researchers are uncertain about how to initiate and maintain relationships with advocates. We offer actionable steps to support researchers working with patient advocates to improve cancer research and accomplish our collective goal of improving lives of those who have been diagnosed with breast cancer. We hope that this initiative will facilitate such collaborative efforts.
RESUMO
The excited-state dynamics of phenylvinylacetylene (1-phenyl-1-buten-3-yne, PVA) have been studied using laser-induced fluorescence spectroscopy, ultraviolet depletion spectroscopy, and the newly developed method of ultraviolet population transfer spectroscopy. Both isomers of PVA (E and Z) show a substantial loss in fluorescence intensity as a function of excitation energy. This loss in fluorescence was shown to be due to the turn-on of a nonradiative process by comparison of the laser-induced fluorescence spectrum to the ultraviolet depletion spectrum of each isomer, with a threshold 600 cm(-1) above the electronic origin in Z-PVA and 1000 cm(-1) above the electronic origin in E-PVA. Ab initio and density functional theory calculations have been used to show that the most likely source of the nonradiative process is from the interaction of the pi pi* state with a close lying pi sigma* state whose minimum energy structure is bent along the terminal CCH group. Ultraviolet population transfer spectroscopy has been used to probe the extent to which excited-state isomerization is facilitated by the interaction with the pi sigma* state. In ultraviolet population transfer spectroscopy, each isomer was selectively excited to vibronic levels in the S(1) state with energies above and below the threshold for fluorescence quenching. The ultraviolet-excited populations are then recooled to the zero point levels using a reaction tube designed to constrain the supersonic expansion and increase the collision cooling capacity of the expansion. The new isomeric distribution was detected in a downstream position using resonant-2-photon ionization spectroscopy. From these spectra, relative isomerization quantum yields were calculated as a function of excitation energy. While the fluorescence quantum yield drops by a factor of 50-100, the isomerization quantum yields remain essentially constant, implying that the nonradiative process does not directly involve isomerization. On this basis, we postulate that isomerization occurs on the ground-state potential energy surface after internal conversion. In these experiments, the isomerization to naphthalene was not observed, implying a competition between isomerization and cooling on the ground-state potential energy surface.
RESUMO
(E)-Phenylvinylacetylene was shown previously (C.-P. Liu, J. J. Newby, C. W. Müller, H. D. Lee, T. S. Zwier, J. Phys. Chem. A, 2008, 112, 9454.) to support extensive Duschinsky mixing among its four lowest-frequency out-of-plane normal coordinates Q(45)-Q(48) in the S(1)<-- S(0), i.e. (L(a)) A (1)A'<-- X (1)A', electronic transition. The complexity of this mixing is considerably increased relative to that of its parent styrene due to the longer conjugated side chain. Here we quantitatively analyze this change of the motional character of the four non-totally symmetric vibrations upon electronic excitation. The peak intensities of 182 overtone and combination transitions spread over seven SVLF spectra were fit simultaneously with seven parameters in an automated least-squares fitting procedure in which an unweighted least-squares sum was minimized using a pattern search algorithm. The seven parameters consisted of the six Duschinsky rotation angles and the S(1) frequency of normal mode nu(48). The required four-dimensional Franck-Condon overlap integrals were calculated using previously reported recursion relations between harmonic oscillator wavefunctions. As a consistency check, the intensities of all possible 434 electric dipole allowed overtone and combination bands of normal modes nu(45)-nu(48) up to individual vibrational quantum numbers of v = 4 were simulated. The comparison with the experimental intensities revealed with few exceptions very good agreement. The results of the Duschinsky analysis are discussed in light of the pi-pi* electronic excitation as represented by different ab initio (HF, CIS, CASSCF), density functional (B3LYP and BP86) and time-dependent density functional (TD-B3LYP and TD-BP86) methods. Our Duschinsky mixing analysis reveals a challenging complexity that is not quantitatively reproduced by widely used excited state quantum chemical methods. The sensitivity of Duschinsky mixing coefficients to both excited state equilibrium geometries and force fields thus provides a valuable benchmark for the improvement of excited state quantum chemical methods.
Assuntos
Simulação por Computador , Modelos Químicos , Teoria Quântica , Compostos de Vinila/química , Elétrons , Estrutura Molecular , VibraçãoRESUMO
The fluorescence spectroscopy of Z-phenylvinylacetylene (Z-PVA) has been studied under jet-cooled conditions. The laser-induced fluorescence (LIF) spectrum shows vibronic activity up to 600 cm(-1) above the pi pi* electronic origin at 33 838 cm(-1). In contrast, the single vibronic level fluorescence spectrum of the electronic origin shows strong intensity in transitions ending in ground state levels at least 1200 cm(-1) above the ground state zero-point level. The double-resonance technique of ultraviolet depletion (UVD) spectroscopy was used to show that there are strong absorptions in Z-PVA that are not observed in the LIF spectrum due to the turn of a nonradiative process in this electronic state. The LIF and UVD spectra were compared quantitatively to calculate the relative single vibronic level fluorescence quantum yields. Upon inspection, there are some indications of state specific effects; however, the nature of these effects is unclear. Ab initio and density functional theory calculations of the ground and excited states were used to map the first two excited states of Z-PVA along the C[triple bond]CH bending coordinate, determining them to be pi pi* and pi sigma*, respectively, in character. The crossing of these two states is postulated to be the underlying reason for the observed loss in fluorescence intensity 600 cm(-1) above the pi pi* origin. The spectroscopy of Z-PVA has been compared to the previously characterized E isomer of phenylvinylacetylene [Liu, C. P., Newby, J. J., Muller, C. W., Lee, H. D. and Zwier, T. S. J. Phys. Chem. A 2008, 112 (39), 9454.].
Assuntos
Naftalenos/química , Compostos de Vinila/química , Simulação por Computador , Modelos Químicos , Estrutura Molecular , Fotoquímica , Espectrometria de Fluorescência , EstereoisomerismoRESUMO
Near-pure samples of (E)-phenylvinylacetylene ((E)-PVA) and (Z)-phenylvinylacetylene ((Z)-PVA) were synthesized, and their ultraviolet spectroscopy was studied under jet-cooled conditions. The fluorescence excitation and UV-UV holeburning (UVHB) spectra of both isomers were recorded. The S0-S1 origin of (E)-PVA occurs at 33,578 cm(-1), whereas that for (Z)-PVA occurs at 33,838 cm(-1), 260 cm(-1) above that for (E)-PVA. The present study focuses primary attention on the vibronic spectroscopy of (E)-PVA. Single vibronic level fluorescence spectra of many prominent bands in the first 1200 cm(-1) of the S0-S1 excitation spectrum of (E)-PVA were recorded, including several hot bands involving low-frequency out-of-plane vibrations. Much of the ground-state vibronic structure observed in these spectra was assigned by comparison with styrene and trans-beta-methylstyrene, assisted by calculations at the DFT B3LYP/6-311++G(d,p) level of theory. Both S0 and S1 states of (E)-PVA are shown to be planar, with intensity appearing only in even overtones of out-of-plane vibrations. Due to its longer conjugated side chain compared with that of its parent styrene, (E)-PVA supports extensive Duschinsky mixing among the four lowest-frequency out-of-plane modes (nu45-nu48), increasing the complexity of this mixing relative to that of styrene. Identification of the v'' = 0-3 levels of nu48, the lowest frequency torsion, provided a means of determining the 1D torsional potential for hindered rotation about the C(ph)-C(vinyl) bond. Vibronic transitions due to (Z)-PVA were first identified as small vibronic bands that did not appear in the UVHB spectrum recorded with the hole-burn laser fixed on the S0-S1 origin of (E)-PVA. The LIF and UVHB spectra of a synthesized sample of (Z)-PVA confirmed this assignment.
RESUMO
Non-porous, colloidal silica particles were annealed at three different temperatures, 800, 900 and 1050 °C. The adsorption of lysozyme, a probe of surface roughness, was consistent with progressively reduced surface roughness as temperature increased. The heat treated silica particles were rehydroxylated and then used to pack UHPLC columns. The cationic protein lysozyme was used to probe silanol activity, which exhibited progressively less tailing as the annealing temperature increased. FTIR spectroscopy confirmed that the abundance of isolated silanols on the surface was reduced by annealing at 900 °C or 1050 °C. FTIR also revealed that there was markedly increased hydrogen bonding of the isolated silanols to neighbors after rehydroxylation. These results combine to support the hypothesis that (a) isolated silanols on silica cause tailing in RP-LC and (b) nonplanar topography gives rise to isolated silanols.
Assuntos
Cromatografia de Fase Reversa/instrumentação , Silanos/isolamento & purificação , Dióxido de Silício/química , Adsorção , Muramidase/análise , Muramidase/isolamento & purificação , Silanos/análiseRESUMO
The vibronic excitation spectrum of phenylcyclopenta-1,3-diene (PCP3D) has been recorded in a supersonic expansion using resonant-two-photon ionization (R2PI) and laser-induced fluorescence (LIF) techniques. The spectrum is dominated by the S(0)-S(1) origin transition (31,739 cm(-1)), with several low-frequency vibronic bands in the first 400 cm(-1), followed by a sharp cut-off in intensity due to turn-on of a non-radiative process. Single vibronic level fluorescence (SVLF) spectra were recorded for the S(1) origin and several vibronic bands of PCP3D. The excitation and emission spectra show that the molecule is planar with C(s) symmetry in both the ground and excited states. Torsional potentials were simulated from the observed torsional structure in the excitation and emission spectra. The S(0) potential (V(2) = 1237 cm(-1), V(4) = -256 cm(-1)) is associated with a flat-bottomed potential supporting large inter-ring angular changes with little cost in energy (+/-36 degrees at 200 cm(-1)), with a barrier of 1237 cm(-1) at the perpendicular geometry. The S(1) potential is much stiffer about the planar geometry, with a calculated barrier five times larger than in S(0) (V(2) = 6732 cm(-1), V(4) = -477 cm(-1)). Based on the torsional assignments, weak bands in the same frequency region assigned earlier to the structural isomer phenylcyclopenta-1,4-diene [J. J. Newby, J. A. Stearns, C. P. Liu and T. S. Zwier, J. Phys. Chem. A, 2007, 111, 10914-10927] have been re-assigned as hot bands arising from v'' = 1 in the inter-ring torsion, nu(57).
RESUMO
The ultraviolet spectroscopy of the S(1) <-- S(0) transition of 1-phenylcyclopentene (PCP) was studied by resonant-two-photon ionization (R2PI), laser-induced fluorescence (LIF) and single vibronic level fluorescence (SVLF). UV-UV hole-burning (UVHB) spectroscopy was used to determine that there is only one spectroscopically distinct conformer in the supersonic expansion. The excitation spectrum shows extensive vibronic structure extending to over 1000 cm(-1) above the electronic origin (34,646 cm(-1)). Much of the vibronic structure is similar to that of styrene and other singly substituted benzene derivatives, with Franck-Condon (FC) activity predominantly in substituent-sensitive benzene modes. Sizeable FC progressions were also found in the inter-ring torsion, reflecting a large displacement in the inter-ring angle upon electronic excitation. No evidence for FC activity in the ring-puckering coordinate is observed. The torsional potentials of the ground and excited states were determined from the experimental transition frequencies by fitting the calculated to the experimental torsional frequency spacings in an automated least-squares fitting procedure. The S(1) torsional potential is a symmetric single-well potential centered around a locally planar equilibrium geometry at a torsional angle of varphi = 0 degrees . The energy levels are reproduced by a cosine term potential function with torsional parameters V(2) = 3765 cm(-1) and V(4) = -183 cm(-1). The S(0) torsional potential possesses a twisted equilibrium geometry that is strongly asymmetric about varphi = 0 degrees due to the non-planarity of the cyclopentene ring. The best-fit potential parameters uses a sin/cos potential function (odd/even), with V = 948 cm(-1), V = -195 cm(-1), V = -162 cm(-1) and V = -268 cm(-1). The shape of the potentials are similar to those predicted by relaxed potential energy scans calculated at the DFT, CIS and TDDFT//CIS levels of theory. The change in the torsional angle varphi upon electronic excitation was determined to be approximately 15 degrees from fits of the displacement delta of the S(0) torsional potential with respect to the S(1) potential. The simulated shift of the S(0) potential with respect to the S(1) potential of approximately 15 degrees is in very good agreement with that obtained from B3LYP calculations.
RESUMO
A detailed study of the photochemical and discharge-driven pathways taken by gas-phase 1,3-butadiene has been carried out. Photolysis or discharge excitation was initiated inside a short reaction tube attached to the outlet of a pulsed valve. Bath gas temperatures near 100 K were achieved in the reaction tube by the constrained expansion of the gas mixture into the tube, simulating temperatures of relevance in Titan's atmosphere. Photolysis of 1,3-butadiene was initiated at 218 nm with a laser pulse that counter-propagated the reaction tube. Discharge excitation was carried out using discharge electrodes imbedded in the reaction tube walls, enabling the study of the photochemical and discharge products under similar conditions. Products were detected using either single-photon VUV photoionization (118 nm = 10.5 eV) or resonant two-photon ionization (R(2)PI) spectroscopy in a time-of-flight mass spectrometer. Emphasis was placed on characterization of the aromatic products formed, since these may be of particular relevance to Titan's atmosphere, where benzene has been positively identified and 1,3-butadiene is projected as the principle pathway to its formation. Consistent with previous studies of the photodissociation of 1,3-butadiene, C(3)H(3) + CH(3) is the dominant primary product formed. Under the temperature-pressure conditions present in the reaction tube (T approximately 75-100 K, P = 50 mbar), C(6)H(6) is the dominant secondary photochemical product formed. A 1:1 C(4)H(6):C(4)D(6) mixture was used to prove that the C(6)H(6) product was formed by recombination of two C(3)H(3) radicals; however, a careful search for benzene revealed none, indicating that less than 1% of the C(6)H(6) formed in the reaction tube is benzene. This is consistent with expectations for these temperatures and pressures based on previous modeling of propargyl recombination. Two aromatic products were observed from the photochemistry: ethylbenzene and 3-phenylpropyne. Plausible pathways leading to these products are proposed. In the discharge, C(3)H(3) + CH(3) are also identified as significant primary neutral products and C(6)H(6) as a dominant higher-mass product. In this case, the C(6)H(6) was identified as benzene via its R2PI spectrum, appearing with intensity about 10 times larger than any other aromatic formed in the discharge. R2PI spectra of a total of about 15 aromatic products were recorded from the 1,3-butadiene discharge, among them toluene; styrene; phenylacetylene; o-, m-, and p-xylene; ethylbenzene; indane; indene; beta-methylstyrene; and naphthalene. Previously unidentified spectra in the m/z 142 and 144 mass channels were positively identified as the 1,3- and 1,4-isomers of phenylcyclopentadiene and the analogous 1-phenylcyclopentene.
RESUMO
The rotational spectra for five isotopomers of the 1:1 weakly bound complex formed between dimethyl ether (DME) and acetylene (HCCH) have been measured by Fourier transform microwave spectroscopy. The experimental rotational constants, planar moments, and dipole moment components are consistent with a floppy complex possessing an effective C2v structure in which the hydrogen atom of acetylene is hydrogen bonded to the oxygen atom of dimethyl ether with an intermolecular H...O separation of 2.08(3) A. Experimental rotational constants for the normal isotopic species are A = 10382.5(17) MHz, B = 1535.7187(18) MHz, and C = 1328.3990(17) MHz and the dipole moment components are mua= mutotal = 1.91(10) D. Ab initio calculations at the MP2/6-311++G(2d,2p) level indicate that the energy barrier for motion of the HCCH subunit between the lone pairs of the DME, via a C2v intermediate structure, is very low (approximately 0.29 kJ mol(-1)). Inclusion of basis set superposition error and zero point energy corrections to the energies of four stationary points located on the potential energy surface shows that the relative stabilities are particularly sensitive to these corrections. The ab initio optimizations give rotational constants for the C2v structure of A = 10066 MHz, B = 1496 MHz, and C = 1324 MHz, and a dipole moment of mua= mu(total) = 2.12 D, in reasonable agreement with the experimentally determined values. The structural parameters and energetics of the DME-HCCH complex will be discussed and compared to similar complexes such as H2O-HCCH.