The role of charge recombination to triplet excitons in organic solar cells.

The use of non-fullerene acceptors (NFAs) in organic solar cells has led to power conversion efficiencies as high as 18%1. However, organic solar cells are still less efficient than inorganic solar cells, which typically have power conversion efficiencies of more than 20%2. A key reason for this difference is that organic solar cells have low open-circuit voltages relative to their optical bandgaps3, owing to non-radiative recombination4. For organic solar cells to compete with inorganic solar cells in terms of efficiency, non-radiative loss pathways must be identified and suppressed. Here we show that in most organic solar cells that use NFAs, the majority of charge recombination under open-circuit conditions proceeds via the formation of non-emissive NFA triplet excitons; in the benchmark PM6:Y6 blend5, this fraction reaches 90%, reducing the open-circuit voltage by 60 mV. We prevent recombination via this non-radiative channel by engineering substantial hybridization between the NFA triplet excitons and the spin-triplet charge-transfer excitons. Modelling suggests that the rate of back charge transfer from spin-triplet charge-transfer excitons to molecular triplet excitons may be reduced by an order of magnitude, enabling re-dissociation of the spin-triplet charge-transfer exciton. We demonstrate NFA systems in which the formation of triplet excitons is suppressed. This work thus provides a design pathway for organic solar cells with power conversion efficiencies of 20% or more.

Current Progress of Interfacing Organic Semiconducting Materials with Bacteria.

Microbial bioelectronics require interfacing microorganisms with electrodes. The resulting abiotic/biotic platforms provide the basis of a range of technologies, including energy conversion and diagnostic assays. Organic semiconductors (OSCs) provide a unique strategy to modulate the interfaces between microbial systems and external electrodes, thereby improving the performance of these incipient technologies. In this review, we explore recent progress in the field on how OSCs, and related materials capable of charge transport, are being used within the context of microbial systems, and more specifically bacteria. We begin by examining the electrochemical communication modes in bacteria and the biological basis for charge transport. Different types of synthetic organic materials that have been designed and synthesized for interfacing and interrogating bacteria are discussed next, followed by the most commonly used characterization techniques for evaluating transport in microbial, synthetic, and hybrid systems. A range of applications is subsequently examined, including biological sensors and energy conversion systems. The review concludes by summarizing what has been accomplished so far and suggests future design approaches for OSC bioelectronics materials and technologies that hybridize characteristic properties of microbial and OSC systems.

Highly efficient organic photovoltaics with enhanced stability through the formation of doping-induced stable interfaces.

Flexible organic photovoltaics (OPVs) are promising power sources for wearable electronics. However, it is challenging to simultaneously achieve high efficiency as well as good stability under various stresses. Herein, we demonstrate the fabrication of highly efficient (efficiency, 13.2%) and stable OPVs based on nonfullerene blends by a single-step postannealing treatment. The device performance decreases dramatically after annealing at 90 °C and is fully recovered after annealing at 150 °C. Glass-encapsulated annealed OPVs show good environmental stability with 4.8% loss in efficiency after 4,736 h and an estimated T 80 lifetime (80% of the initial power conversion efficiency) of over 20,750 h in the dark under ambient condition and T 80 lifetime of 1,050 h at 85 °C and 30% relative humidity. This environmental stability is enabled by the synergetic effect of the stable morphology of donor/acceptor blends and thermally stabilized interfaces due to doping. Furthermore, the high efficiency and good stability are almost 100% retained in ultraflexible OPVs and minimodules which are mechanically robust and have long-term operation capability and thus are promising for future self-powered and wearable electronics.

Thermally stable, highly efficient, ultraflexible organic photovoltaics.

Flexible photovoltaics with extreme mechanical compliance present appealing possibilities to power Internet of Things (IoT) sensors and wearable electronic devices. Although improvement in thermal stability is essential, simultaneous achievement of high power conversion efficiency (PCE) and thermal stability in flexible organic photovoltaics (OPVs) remains challenging due to the difficulties in maintaining an optimal microstructure of the active layer under thermal stress. The insufficient thermal capability of a plastic substrate and the environmental influences cannot be fully expelled by ultrathin barrier coatings. Here, we have successfully fabricated ultraflexible OPVs with initial efficiencies of up to 10% that can endure temperatures of over 100 °C, maintaining 80% of the initial efficiency under accelerated testing conditions for over 500 hours in air. Particularly, we introduce a low-bandgap poly(benzodithiophene-cothieno[3,4-b]thiophene) (PBDTTT) donor polymer that forms a sturdy microstructure when blended with a fullerene acceptor. We demonstrate a feasible way to adhere ultraflexible OPVs onto textiles through a hot-melt process without causing severe performance degradation.

Towards understanding the doping mechanism of organic semiconductors by Lewis acids.

Precise doping of organic semiconductors allows control over the conductivity of these materials, an essential parameter in electronic applications. Although Lewis acids have recently shown promise as dopants for solution-processed polymers, their doping mechanism is not yet fully understood. In this study, we found that B(C6F5)3 is a superior dopant to the other Lewis acids investigated (BF3, BBr3 and AlCl3). Experiments indicate that Lewis acid-base adduct formation with polymers inhibits the doping process. Electron-nuclear double-resonance and nuclear magnetic resonance experiments, together with density functional theory, show that p-type doping occurs by generation of a water-Lewis acid complex with substantial Brønsted acidity, followed by protonation of the polymer backbone and electron transfer from a neutral chain segment to a positively charged, protonated one. This study provides insight into a potential path for protonic acid doping and shows how trace levels of water can transform Lewis acids into powerful Brønsted acids.

Orbital-Energy Modulation of Tetrabenzoporphyrin-Derived Non-Fullerene Acceptors for Improved Open-Circuit Voltage in Organic Solar Cells.

Tetrabenzoporphyrin (BP) holds attractive characteristics for optoelectronic applications, such as the large π-conjugated framework and high photoabsorption capability. However, its use in organic solar cells (OSCs) has been limited because of the extremely low solubility that hampers direct solution processing and also the high frontier-orbital energies that lead to low open-circuit voltage (VOC). Herein, we examine BP derivatives equipped with multiple strongly electron-withdrawing groups for photovoltaic applications. The derivatives are generated in thin films through a thermal precursor approach, wherein the corresponding bicyclo[2.2.2]octadiene-fused porphyrin derivatives are solution-cast, and then annealed to carry out the in situ retro-Diels-Alder reaction. The frontier-orbital energies of the resulting derivatives are effectively stabilized as compared to pristine BP to such a degree that they afford high VOC of up to 0.94 V when used as a donor or can even work as a new class of nonfullerene acceptor in OSCs. Single-crystal X-ray diffraction analyses demonstrate that the conformation of the BP framework largely varies from being near planar to highly curved depending on its substituents. The morphology of polymer:BP-derivative bulk-heterojunction films prepared by the thermal precursor approach also varies between the BP derivatives. These results can greatly extend the scope of both molecular design and morphology control for utilization of the BP chromophore toward achieving viable organic optoelectronic devices.

Donor-Acceptor-Collector Ternary Crystalline Films for Efficient Solid-State Photon Upconversion.

It is pivotal to achieve efficient triplet-triplet annihilation based photon upconversion (TTA-UC) in the solid-state for enhancing potentials of renewable energy production devices. However, the UC efficiency of solid materials is largely limited by low fluorescence quantum yields that originate from the aggregation of TTA-UC chromophores and also by severe back energy transfer from the acceptor singlet state to the singlet state of the triplet donor in the condensed state. In this work, to overcome these issues, we introduce a highly fluorescent singlet energy collector as the third component of donor-doped acceptor crystalline films, in which dual energy migration, i.e., triplet energy migration for TTA-UC and succeeding singlet energy migration for transferring energy to a collector, takes place. To demonstrate this scheme, a highly fluorescent singlet energy collector was added as the third component of donor-doped acceptor crystalline films. An anthracene-based acceptor containing alkyl chains and a carboxylic moiety is mixed with the triplet donor Pt(II) octaethylporphyrin (PtOEP) and the energy collector 2,5,8,11-tetra- tert-butylperylene (TTBP) in solution, and simple spin-coating of the mixed solution gives acceptor films of nanofibrous crystals homogeneously doped with PtOEP and TTBP. Interestingly, delocalized singlet excitons in acceptor crystals are found to diffuse effectively over the distance of ∼37 nm. Thanks to this high diffusivity, only 0.5 mol % of doped TTBP can harvest most of the singlet excitons, which successfully doubles the solid-state fluorescent quantum yield of acceptor/TTBP blend films to 76%. Furthermore, since the donor PtOEP and the collector TTBP are separately isolated in the nanofibrous acceptor crystals, the singlet back energy transfer from the collector to the donor is effectively avoided. Such efficient singlet energy collection and inhibited back energy transfer processes result in a large increase of UC efficiency up to 9.0%, offering rational design principles toward ultimately efficient solid-state upconverters.

Solution-based electrical doping of semiconducting polymer films over a limited depth.

Solution-based electrical doping protocols may allow more versatility in the design of organic electronic devices; yet, controlling the diffusion of dopants in organic semiconductors and their stability has proven challenging. Here we present a solution-based approach for electrical p-doping of films of donor conjugated organic semiconductors and their blends with acceptors over a limited depth with a decay constant of 10-20 nm by post-process immersion into a polyoxometalate solution (phosphomolybdic acid, PMA) in nitromethane. PMA-doped films show increased electrical conductivity and work function, reduced solubility in the processing solvent, and improved photo-oxidative stability in air. This approach is applicable to a variety of organic semiconductors used in photovoltaics and field-effect transistors. PMA doping over a limited depth of bulk heterojunction polymeric films, in which amine-containing polymers were mixed in the solution used for film formation, enables single-layer organic photovoltaic devices, processed at room temperature, with power conversion efficiencies up to 5.9 ± 0.2% and stable performance on shelf-lifetime studies at 60 °C for at least 280 h.

Enhancing Organic Semiconductor-Surface Plasmon Polariton Coupling with Molecular Orientation.

Due to strong electric field enhancements, surface plasmon polaritons (SPPs) are capable of drastically increasing light-molecule coupling in organic optoelectronic devices. The electric field enhancement, however, is anisotropic, offering maximal functional benefits if molecules are oriented perpendicular to the interface. To provide a clear demonstration of this orientation dependence, we study SPP dispersion and SPP-mediated photoluminescence at a model Au/small-molecule interface where identical molecules can be deposited with two very different molecular backbone orientations depending on processing conditions. First, we demonstrate that thin films of p-SIDT(FBTTh2)2 can be deposited with either all "in-plane" (parallel to substrate) or a 50/50 mix of in-plane/"out-of-plane" (perpendicular to substrate) optical transition dipoles by the absence or presence, respectively, of diiodooctane during spin-coating. In contrast to typical orientation control observed in organic thin films, for this particular molecule, this corresponds to films with conjugated backbones purely in-plane, or with a 50/50 mix of in-plane/out-of-plane backbones. Then, using momentum-resolved reflectometry and momentum-resolved photoluminescence, we study and quantify changes in SPP dispersion and photoluminescence intensity arising solely from changes in molecular orientation. We demonstrate increased SPP momentum and a 2-fold enhancement in photoluminescence for systems with out-of-plane oriented transition dipoles. These results agree well with theory and have direct implications for the design and analysis of organic optoelectronic devices.

Linear Conjugated Polymer Backbones Improve Alignment in Nanogroove-Assisted Organic Field-Effect Transistors.

Three cyclopentadithiophene-difluorophenylene copolymers (named PhF2,3, PhF2,5, and PhF2,6), which differ by the arrangement of fluorines on the phenylene structural unit, were designed and synthesized for the fabrication of organic field-effect transistors (OFETs). Single crystal structures of model compounds representative of the backbone and density functional theory (DFT) were used to estimate the backbone shape for each copolymer. The different substitution arrangements impact the backbone secondary structure through different nonbonding F···H interactions. PhF2,5 and PhF2,6 assumed more linear backbones relative to PhF2,3, which in turn impacts self-assembly and polymer chain alignment on nanogrooved (NG) substrates. A larger improvement of charge carrier mobility for the more linear backbones was achieved when using NG substrates. Among the three polymers, PhF2,6 achieved the highest average field-effect hole mobility (5.1 cm2 V-1 s-1). As evidenced by grazing incidence wide-angle X-ray scattering (GIWAXS), thin films of PF2,5 and PF2,6 exhibited a higher degree of anisotropic alignment, relative to the more curved PF2,3 counterpart, consistent with the higher hole mobilities. This work gives insight into how nonbonding interactions can influence charge carrier mobility through changes in secondary structure and suggests that polymers with more linear shapes might be preferred for achieving greater levels of alignment within the confines of a NG environment.

Biofilm as a redox conductor: a systematic study of the moisture and temperature dependence of its electrical properties.

Some microbial biofilms are electrically conductive. However, the mechanism of electron transport remains unclear. Here, we show that µm-scale long-distance electron transport through electrode-grown Geobacter sulfurreducens biofilms occurs via redox conduction, as determined by electrical measurements performed under varied hydration states and temperatures.

The effect of intermolecular interaction on excited states in p-DTS(FBTTH2)2.

Using optical spectroscopy in solution and thin film, and supported by quantum chemical calculations, we investigated the aggregation process of the donor-acceptor type molecule p-DTS(FBTTH2)2. We demonstrate that cooling a solution induces a disorder-order phase transition that proceeds in three stages analogous to the steps observed in semi-rigid conjugated polymers. By analyzing the spectra, we are able to identify the spectral signature of monomer and aggregate in absorption and emission. From this we find that in films, the fraction of aggregates is near 100% which is in contrast to films made from semi-rigid conjugated polymers.

Effects of solvent additive on "s-shaped" curves in solution-processed small molecule solar cells.

A novel molecular chromophore, p-SIDT(FBTThCA8)2, is introduced as an electron-donor material for bulk heterojunction (BHJ) solar cells with broad absorption and near ideal energy levels for the use in combination with common acceptor materials. It is found that films cast from chlorobenzene yield devices with strongly s-shaped current-voltage curves, drastically limiting performance. We find that addition of the common solvent additive diiodooctane, in addition to facilitating crystallization, leads to improved vertical phase separation. This yields much better performing devices, with improved curve shape, demonstrating the importance of morphology control in BHJ devices and improving the understanding of the role of solvent additives.

Striking effect of intra- versus intermolecular hydrogen bonding on zwitterions: physical and electronic properties.

We report the synthesis, characterization, and application of novel zwitterions. The zwitterionic structures consist of a positively charged cyanine and negatively charged dienolate moieties, confirmed by experimental observations and theoretical calculations. Single crystal X-ray studies revealed that BIT-(NPh)2 is a coplanar molecule that forms 1-D chains via π-π interactions. In contrast, BIT-(NHexyl)2 is a twisted molecule with a dihedral angle of 78° between the charged planes. In charge transport studies, thin films of the flat zwitterion show semiconducting properties, with a hole mobility of 2.1 × 10(-4) cm(2) V(-1) s(-1) while the twisted zwitterion is a high resistivity insulator.

Topological considerations for the design of molecular donors with multiple absorbing units.

The molecule AT1, with two weakly conjugated chromophores, was designed, synthesized, and examined within the context of its film forming tendencies. While the addition of the second chromophore to the central core enables broadening of the absorption spectrum, this change is mostly apparent in films that are grown slowly. Grazing incidence X-ray scattering (GIWAXS) analysis indicates that these spectral characteristics correspond to an increase in solid state ordering. This information, in combination with differential scanning calorimetry, suggests that the overall molecular shape provides a kinetic barrier to crystallization. As a result, one finds the absence of molecular order when AT1 is combined with PC71BM in solution-cast blends. These findings highlight the importance of molecular topology when designing molecular components for solar cell devices.

High open circuit voltage in regioregular narrow band gap polymer solar cells.

The regioregular narrow band gap (E(g) ~1.5 eV) conjugated polymer PIPCP was designed and synthesized. PIPCP contains a backbone comprised of CPDT-PT-IDT-PT repeat units (CPDT = cyclopentadithiophene, PT = pyridyl[2,1,3]thiadiazole, IDT = indacenodithiophene) and strictly organized PT orientations, such that the pyridyl N-atoms point toward the CPDT fragment. Comparison of PIPCP with the regiorandom counterpart PIPC-RA illustrates that the higher level of molecular order translates to higher power conversion efficiencies (PCEs) when incorporated into bulk heterojunction (BHJ) organic solar cells. Examination of thin films via absorption spectroscopy and grazing incidence wide-angle X-ray diffraction (GIWAXS) experiments provides evidence of higher order within thin films obtained by spin coating. Most significantly, we find that PIPCP:PC61BM blends yield devices with an open circuit voltage (V(oc)) of 0.86 V, while maintaining a PCE of ~6%. Comparison against a wide range of analogous narrow band gap conjugated polymers reveals that this V(oc) value is particularly high for a BHJ system with band gaps in the 1.4-1.5 eV range thereby indicating a very low E(g) - eV(oc) loss.

Operational mechanism of conjugated polyelectrolytes.

Conjugated polyelectrolytes (CPEs) are versatile materials used in a range of organic optoelectronic applications. Because of their ionic/electronic nature, characterizing these materials is nontrivial, and their operational mechanism is not fully understood. In this work we use a methodology that combines constant-voltage-driven current-density transient measurements with fast current vs voltage scans to allow decoupling of ionic and electronic phenomena. This technique is applied to diodes prepared with cationic CPEs having different charge-compensating anions. Our results indicate that the operational mechanism of these devices is governed by electrochemical doping of the CPE. On the basis of the notion that the saturated depletion layer for the anions consists of the same π-conjugated backbone material, we discern how the extent and speed of formation of the doped region depend on the anion structure. Apart from addressing fundamental transport questions, this work provides a tool for future characterization of different CPEs and other similar systems.

Silaindacenodithiophene-based molecular donor: morphological features and use in the fabrication of compositionally tolerant, high-efficiency bulk heterojunction solar cells.

A novel solution-processable small molecule, namely, benzo[1,2-b:4,5-b]bis(4,4'-dihexyl-4H-silolo[3,2-b]thiophene-2,2'-diyl)bis(6-fluoro-4-(5'-hexyl-[2,2'-bithiophene]-5-yl)benzo[c][1,2,5]thiadiazole (p-SIDT(FBTTh2)2), was designed and synthesized by utilizing the silaindacenodithiophene (SIDT) framework as the central D(2) donor unit within the D(1)AD(2)AD(1) chromophore configuration. Relative to the widely studied 7,7'-[4,4-bis(2-ethylhexyl)-4H-silolo[3,2-b:4,5-b']dithiophene-2,6-diyl]bis[6-fluoro-4-(5'-hexyl-[2,2'-bithiophene]-5-yl)benzo[c][1,2,5]thiadiazole] (p-DTS(FBTTh2)2), which contains the stronger donor fragment dithienosilole (DTS) as D(2), one finds that p-SIDT(FBTTh2)2 exhibits a wider band gap and can be used to fabricate bulk heterojunction solar cells with higher open circuit voltage (0.91 V). Most remarkably, thin films comprising p-SIDT(FBTTh2)2 can achieve exceptional levels of self-organization directly via solution deposition. For example, high-resolution transmission electron microscopy analysis shows that p-SIDT(FBTTh2)2 spin-cast from chlorobenzene organizes into crystalline domains with lattice planes that extend over length scales on the order of hundreds of nanometers. Such features suggest liquid crystalline properties during the evolution of the film. Moreover, grazing incidence wide-angle X-ray scattering analysis shows a strong tendency for the molecules to exist with a strong "face-on" orientation relative to the substrate plane. Similar structural features, albeit of more restricted dimensions, can be observed within p-SIDT(FBTTh2)2:PC71BM bulk heterojunction thin films when the films are processed with 0.4% diiodooctane (DIO) solvent additive. DIO use also increases the solar cell power conversion efficiencies (PCEs) from 1.7% to 6.4%. Of significance from a practical device fabrication perspective is that, for p-SIDT(FBTTh2)2:PC71BM blends, there is a wide range of compositions (from 20:80 to 70:30 p-SIDT(FBTTh2)2:PC71BM) that provide good photovoltaic response, i.e., PCE = 4-6%, indicating a robust tendency to form the necessary continuous phases for charge carrier collection. Light intensity photocurrent measurements, charge selective diode fabrication, and internal quantum efficiency determinations were carried out to obtain insight into the mechanism of device operation. Inclusion of DIO in the casting solution results in films that exhibit much lower photocurrent dependence on voltage and a concomitant increase in fill factor. At the optimum blend ratio, devices show high charge carrier mobilities, while mismatched hole and electron mobilities in blends with high or low donor content result in reduced fill factors and device performance.

Improved light harvesting and improved efficiency by insertion of an optical spacer (ZnO) in solution-processed small-molecule solar cells.

We demonstrate that the power conversion efficiency can be significantly improved in solution-processed small-molecule solar cells by tuning the thickness of the active layer and inserting an optical spacer (ZnO) between the active layer and the Al electrode. The enhancement in light absorption in the cell was measured with UV-vis absorption spectroscopy and by measurements of the photoinduced carriers generation rate. The ZnO layer used to improve the light-harvesting increases the charge collection efficiency, serves as a blocking layer for holes, and reduces the recombination rate. The combined optical and electrical improvements raise the power conversion efficiency of solution-processed small-molecule solar cells to 8.9%, that is, comparable to that of polymer counterparts.

Enhancement of the photoresponse in organic field-effect transistors by incorporating thin DNA layers.

A mechanistic study of the DNA interfacial layer that enhances the photoresponse in n-type field-effect transistors (FET) and lateral photoconductors using a solution-processed fullerene derivative embedded with disperse-red dye, namely PCBDR, is reported. Incorporation of the thin DNA layer simultaneously leads to increasing the electron injection from non-Ohmic contacts into the PCBDR active layer in dark and to increasing the photocurrent under irradiation. Such features lead to the observation of the enhancement of the photoresponsivity in PCBDR FETs up to 10(3) . Kelvin probe microscopy displays that in the presence of the DNA layer, the surface potential of PCBDR has a greater change in response to irradiation, which is rationalized by a larger number of photoinduced surface carriers. Transient absorption spectroscopy confirms that the increase in photoinduced carriers in PCBDR under irradiation is primarily ascribed to the increase in exciton dissociation rates through the PCBDR/DNA interface and this process can be assisted by the interfacial dipole interaction.