Sulfur- and Amine- Promoted Multielectron Autoredox Transformation of Nitromethane: Multicomponent Access to Thiourea Derivatives.

Thiourea derivatives are in-demand motifs in organic synthesis, medicinal chemistry and material science, yet redox methods for the synthesis that start from safe, simple, inexpensive and readily available feedstocks are scarce. In this article, we disclose the synthesis of these motifs using elemental sulfur and nitromethane as the starting materials. The method harnesses the multi-electron auto-redox property of nitromethane in the presence of sulfur and amines, delivering thiourea products without any added oxidant or reductant. Extension of this reaction to cyclizable amines and/or higher homologues of nitromethane led to a wide range of nitrogen heterocycles and thioamides. Operationally simple, the reactions are scalable, tolerate a wide range of functional groups, and can be employed for the direct functionalization of natural products. Mechanistically, the nitro group was found to act as an oxidant leaving group, being reduced to ammonia whereas sulfur, along with the role of a sulfur building block for the thiocarbonyl group, behaved as a complementary reductant, being oxidized to sulfate.

Thioxanthone-Based Siloxane Photosensitizer for Cationic/Radical Photopolymerization and Photoinduced Sol-Gel Reactions.

In this investigation, a multifunctional visible-light TX-based photosensitizer containing a siloxane moiety (TXS) was designed with a good overall yield of 54%. The addition of a siloxane moiety enabled the incorporation of a TX photosensitizer into a siloxane network by photoinduced sol-gel chemistry, thus avoiding its release. Both liquid 1H and solid-state 29Si NMR measurements undeniably confirmed the formation of photoacids resulting from the photolysis of the TXS/electron acceptor molecule (Iodonium salt), which promoted the photoinduced hydrolysis/condensation of the trimethoxysilane groups of TXS, with a high degree of condensation of its inorganic network. Notably, the laser flash photolysis, fluorescence, and electron paramagnetic resonance spin-trapping (EPR ST) experiments demonstrated that TXS could react with Iod through an electron transfer reaction through its excited states, leading to the formation of radical initiating species. Interestingly, the TXS/Iod was demonstrated to be an efficient photoinitiating system for free-radical (FRP) and cationic (CP) polymerization under LEDs@385, 405, and 455 nm. In particular, whatever the epoxy monomer mixtures used, remarkable final epoxy conversions were achieved up to 100% under air. In this latter case, we demonstrated that both the photoinduced sol-gel process (hydrolysis of trimethoxysilane groups) and the cationic photopolymerization occurred simultaneously.

Hybrid Fibrillar Xerogels with Unusual Magnetic Properties.

We report on the preparation of a hybrid nanomaterial made up of 1D filaments of an antiferromagnetic self-assembling bicopper complex encapsulated in polymer nanofibrils. The encapsulation process is achieved through the heterogeneous nucleation of the growth of polymer fibrils obtained by thermoreversible gelation as shown by calorimetry experiments. Neutron scattering experiments confirm that the filaments of a bicopper complex retain their 1D character after encapsulation in the fibrils. Superconducting quantum interference device experiments show that the bicopper complex, originally in the gapped spin state in the 3D bulk mesophase, displays a gapless behavior once encapsulated. Extended absorption fine structure and infrared results further highlight the difference in the molecular arrangement of the bicopper complex between the bulk mesophase and the encapsulated state, which may account for the magnetic behavior. This material, which is largely disordered, differs totally from the usual magnetic systems where this effect is observed only on highly crystalline systems with long-range order. Also, this hybrid material is very easy to prepare from its basic constituents and can be further processed in many ways.

Ion pairing controls rheological properties of "processionary" polyelectrolyte hydrogels.

We demonstrated recently that polyelectrolytes with cationic moieties along the chain and a single anionic head are able to form physical hydrogels due to the reversible nature of the head-to-body ionic bond. Here we generate a variety of such polyelectrolytes with various cationic moieties and counterion combinations starting from a common polymeric platform. We show that the rheological properties (shear modulus, critical strain) of the final hydrogels can be modulated over three orders of magnitude depending on the cation/anion pair. Our data fit remarkably well within a scaling model involving a supramolecular head-to-tail single file between cross-links, akin to the behaviour of pine-processionary caterpillar. This model allows the quantitative measure of the amount of counterion condensation from standard rheology procedure.

Design of Nanohybrid Systems from a Partially Fluorinated Organogelator and Syndiotactic Polystyrene Thermoreversible Gel.

Nanohybrid systems are prepared from organogels of a partially fluorinated molecule and from thermoreversible gels of syndiotactic polystyrene. The thermodynamic behavior, morphology, and structure are investigated by using differential scanning calorimetry, atomic force microscopy, small-angle X-ray scattering (SAXS), and small-angle neutron scattering (SANS). The outcomes of these investigations suggest that the fibrils of the organogel coil around the sPS fibrils, probably through a heterogeneous nucleation process. These systems therefore differ from previously investigated sPS/OPV systems (oligo vinylene phenylene) where OPV fibrils pervade the sPS network.

Extending the limits of precision polymer synthesis: giant polyphenylene dendrimers in the megadalton mass range approaching structural perfection.

The catalyst-free Diels-Alder synthesis of polyphenylene dendrimers with a chromophore core has now been demonstrated to achieve the seventh to ninth generations upon divergent growth. Since standard analytical tools such as size-exclusion chromatography do not provide realistic molecular weights, MALDI-TOF mass spectrometry was applied to characterize the complete series of nine generations. Perfection and monodispersity were thus elucidated at such high masses. Transmission electron microscopy imaging was used to determine the size of these molecularly defined nanosized "particles" with diameters of up to 33 nm.

Investigation of the interactions involved in the formation of nanotubes from organogelators.

Investigations into the formation of nanosized structures, particularly nanotubes, by a diamide ester compound are reported. Two aspects are concurrently examined: the role of the solvent and the role of the alkyl chain. The former is addressed by using a benzene derivative (o-xylene) and a totally saturated double ring (trans-decahydronaphthalene) whereas the latter is achieved by replacing the hydrogenous alkyl chain with its fluorinated counterpart while keeping the overall architecture the same. The thermodynamic behavior by differential scanning calorimetry, the morphology by transmission electron microscopy, and the structure by X-ray scattering and small-angle neutron scattering are studied. Despite the identical architecture, the fluorinated molecule does not produce any nanotubes, unlike its totally hydrogenous counterpart. Also, o-xylene prevents the hydrogenous molecule from forming nanotubes, while nanotapes are produced instead. Conversely, the fluorinated molecule produces regularly twisted protostructures in either solvent. Neutron scattering experiments show that the fluorinated alky chain is located within the core of this structure. This suggests that the prerequisite for forming nanotubes relies on the necessity of the alkyl group to point outward.

Photoswitchable conductivity in a rigidly dendronized salt.

Light switch: a dendronized salt exhibiting photoswitchable conductivity was designed and synthesized. The salt consists of tetrabutylammonium cations and large, rigidly dendronized borate anions, each bearing eight photoresponsive azobenzene moieties. The conductivity of solutions of this salt can be reversibly switched by irradiation, owing to light-induced changes in the overall size of the dendronized anion and the density of its polyphenylene shell.

Exploring economic and environmental efficiency in renewable energy utilization: a case study in the Organization for Economic Cooperation and Development countries.

The share of renewable energy has grown significantly in global energy supply, yet the evaluation of renewable energy utilization has remained limited. Hence, this research explored economic and environmental efficiency in renewable energy utilization in 20 OECD (The Organization for Economic Cooperation and Development) countries from 2015 to 2020. The study approached the data envelopment analysis-slack-based measure (DEA-SBM) to evaluate economic efficiency, and the DEA undesirable output to measure environmental efficiency. Four inputs as labor force, gross capital formation, total renewable energy capacity, and share of renewable energy were compared to two desirable outputs as the gross domestic product (GDP), and total energy production in the economic efficiency model. In the environmental efficiency model, the same inputs were evaluated with GDP as the desirable output and CO2 emissions as the undesirable output. The DEA-SBM revealed that Australia, Belgium, Norway, the UK, and the USA were efficient in economic evaluation, whereas DEA undesirable output indicated that Belgium, France, Sweden, the UK, and the USA were efficient in environmental evaluation. The governments are suggested to adjust the resources management since the number of efficient units decreased in the economic assessment while fluctuating in the environmental assessment.

Synthesis of Thioureas, Thioamides, and Aza-Heterocycles via Dimethyl-Sulfoxide-Promoted Oxidative Condensation of Sulfur, Malonic Acids, and Amines.

Malonic acid and derivatives have been well-known to undergo monodecarboxylation under relatively mild conditions and have been exclusively used as a C2 synthon. We report herein their new application as a C1 synthon via double decarboxylation promoted by sulfur and dimethyl sulfoxide. In the presence of amines as nucleophiles, a wide range of thioureas and thioamides as well as N-heterocycles were obtained in good to excellent yields under mild heating conditions.

A fluorescent, shape-persistent dendritic host with photoswitchable guest encapsulation and intramolecular energy transfer.

A fluorescent and photoresponsive host based on rigid polyphenylene dendrimers (PPDs) has been synthesized. The key building block for the divergent dendrimer buildup is a complex tetracyclone 12 containing azobenzenyl, pyridyl, and ethynyl entities. The rigidity of polyphenylenes is of crucial importance for a site-specific placement of different functions: eight azobenzene (AB) moieties into the rigid scaffold, a fluorescent perylenetetracarboxdiimide (PDI) into the core, and eight pyridin functions into the interior cavities. AB moieties of host-1 undergo reversible cis-trans photoisomerization and are photostable, as confirmed by various techniques: UV-vis, (1)H NMR, size exclusion chromatography, and fluorescence correlation (FCS). In this system, AB moieties act as photoswitchable hinges and enable control over (i) molecular size, (ii) intramolecular energy transfer between AB and PDI, and (iii) encapsulation and release of guest molecules. The presence of PDI allows not only following the effect of cis-trans photoisomerization on molecular size with highly sensitive FCS but also monitoring the efficiency of the intramolecular energy transfer process (from AB to PDI) by time-resolved optical spectroscopy. Pyridyl functions were incorporated to facilitate guest uptake via hydrogen bonds between the host and guests. Also, we have demonstrated that the photoswitchability of the host can be utilized to actively encapsulate guest molecules into its interior cavities. This novel, light-driven encapsulation mechanism could enable the design of new drug delivery systems.

Direct functionalization of self-assembled nanotubes overcomes unfavorable self-assembling processes.

Diamides containing alkyne and azido were self-assembled into nanotubes and were reacted under their self-assembled state with small molecules by "click chemistry"; the resulting compounds remain self-assembled into new nanotubes that cannot be formed by simple self-assembly of the constituting molecules.

Nanoporous Polymer Films of Cyanate Ester Resins Designed by Using Ionic Liquids as Porogens.

Novel nanoporous film materials of thermostable cyanate ester resins (CERs) were generated by polycyclotrimerization of dicyanate ester of bisphenol E in the presence of varying amounts (from 20 to 40 wt%) of an ionic liquid (IL), i.e., 1-heptylpyridinium tetrafluoroborate, followed by its quantitative extraction after complete CER network formation. The completion of CER formation and IL extraction was assessed using gel fraction content determination, FTIR, 1H NMR, and energy-dispersive X-ray spectroscopy (EDX). SEM and DSC-based thermoporometry analyses demonstrated the formation of nanoporous structures after IL removal from CER networks, thus showing the effective role of IL as a porogen. Pore sizes varied from ~20 to ~180 nm with an average pore diameter of around 45-60 nm depending on the initial IL content. The thermal stability of nanoporous CER-based films was investigated by thermogravimetric analysis.

The mCME Project: A Randomized Controlled Trial of an SMS-Based Continuing Medical Education Intervention for Improving Medical Knowledge among Vietnamese Community Based Physicians' Assistants.

BACKGROUND: Community health workers (CHWs) provide critical services to underserved populations in low and middle-income countries, but maintaining CHW's clinical knowledge through formal continuing medical education (CME) activities is challenging and rarely occurs. We tested whether a Short Message Service (SMS)-based mobile CME (mCME) intervention could improve medical knowledge among a cadre of Vietnamese CHWs (Community Based Physician's Assistants-CBPAs) who are the leading providers of primary medical care for rural underserved populations. METHODS: The mCME Project was a three arm randomized controlled trial. Group 1 served as controls while Groups 2 and 3 experienced two models of the mCME intervention. Group 2 (passive model) participants received a daily SMS bullet point, and were required to reply to the text to acknowledge receipt; Group 3 (interactive model) participants received an SMS in multiple choice question format addressing the same thematic area as Group 2, entering an answer (A, B, C or D) in their response. The server provided feedback immediately informing the participant whether the answer was correct. Effectiveness was based on standardized examination scores measured at baseline and endline (six months later). Secondary outcomes included job satisfaction and self-efficacy. RESULTS: 638 CBPAs were enrolled, randomized, and tested at baseline, with 592 returning at endline (93.7%). Baseline scores were similar across all three groups. Over the next six months, participation of Groups 2 and 3 remained high; they responded to >75% of messages. Group 3 participants answered 43% of the daily SMS questions correctly, but their performance did not improve over time. At endline, the CBPAs reported high satisfaction with the mCME intervention, and deemed the SMS messages highly relevant. However, endline exam scores did not increase over baseline, and did not differ between the three groups. Job satisfaction and self-efficacy scores also did not improve. Average times spent on self-study per week did not increase, and the kinds of knowledge resources used by the CBPAs did not differ between the three groups; textbooks, while widely available, were seldom used. CONCLUSIONS: The SMS-based mCME intervention, while feasible and acceptable, did not result in increased medical knowledge. We hypothesize that this was because the intervention failed to stimulate lateral learning. For an intervention of this kind to be effective, it will be essential to find more effective ways to couple SMS as a stimulus to promote increased self-study behaviors. TRIAL REGISTRATION: ClinicalTrials.gov NCT02381743.

Size-selective 2D ordering of gold nanoparticles using surface topography of self-assembled diamide template.

Size-selective organization of ~2 nm dodecanethiol stabilized gold nanoparticles (AuNPs) into periodic 1D arrays by using the surface topographical features of a soft template is described. The template consists of micrometer length nanotapes organized into nanosheets with periodic valleys running along their length and is generated by the hierarchical self-assembly of a diamide molecule (BHPB) in cyclohexane. The AuNP ordering achieved simply by mixing the preformed template with the readily available ~2 nm dodecanethiol stabilized AuNPs is comparable to those obtained using programmable DNA and functional block copolymers. The observed periodicity of the AuNP arrays provided valuable structural clues about the organization of nanotapes into nanosheets. Self-assembling BHPB molecules in the presence of AuNPs by heating and cooling the two components led to a comparatively disordered organization because the template structure was changed under these conditions. Moreover, the template could not order larger AuNPs (~5 nm) into a similar 1D array, owing to the steric restriction imposed by the dimension of the valleys on the template. Interestingly, this geometric constraint led to AuNP size sorting when a polydisperse sample (2.5 ± 0.9 nm) was used for organization, with AuNPs attached to the template edges being larger (≥2.2 ± 0.9 nm) than those associated to the inner valleys (1.6 ± 0.8 nm). This is a unique example of size-sorting induced by the surface topographical features of a soft template.