RESUMO
Despite all recent progresses in nerve tissue engineering, critical-sized nerve defects are still extremely challenging to repair. Therefore, this study targets the bridging of critical nerve defects and promoting an oriented neuronal outgrowth by engineering innovative nerve guidance conduits (NGCs) synergistically possessing exclusive topographical, chemical, and mechanical cues. To do so, a mechanically adequate mixture of polycaprolactone (PCL) and polylactic-co-glycolic acid (PLGA) was first carefully selected as base material to electrospin nanofibrous NGCs simulating the extracellular matrix. The electrospinning process was performed using a newly designed 2-pole air gap collector that leads to a one-step deposition of seamless NGCs having a bilayered architecture with an inner wall composed of highly aligned fibers and an outer wall consisting of randomly oriented fibers. This architecture is envisaged to afford guidance cues for the extension of long neurites on the underlying inner fiber alignment and to concurrently provide a sufficient nutrient supply through the pores of the outer random fibers. The surface chemistry of the NGCs was then modified making use of a hollow cathode discharge (HCD) plasma reactor purposely designed to allow an effective penetration of the reactive species into the NGCs to eventually treat their inner wall. X-ray photoelectron spectroscopy (XPS) results have indeed revealed a successful O2 plasma modification of the inner wall that exhibited a significantly increased oxygen content (24 â 28%), which led to an enhanced surface wettability. The treatment increased the surface nanoroughness of the fibers forming the NGCs as a result of an etching effect. This effect reduced the ultimate tensile strength of the NGCs while preserving their high flexibility. Finally, pheochromocytoma (PC12) cells were cultured on the NGCs to monitor their ability to extend neurites which is the base of a good nerve regeneration. In addition to remarkably improved cell adhesion and proliferation on the plasma-treated NGCs, an outstanding neural differentiation occurred. In fact, PC12 cells seeded on the treated samples extended numerous long neurites eventually establishing a neural network-like morphology with an overall neurite direction following the alignment of the underlying fibers. Overall, PCL/PLGA NGCs electrospun using the 2-pole air gap collector and O2 plasma-treated using an HCD reactor are promising candidates toward a full repair of critical nerve damage.
Assuntos
Neuritos , Alicerces Teciduais , Ratos , Animais , Alicerces Teciduais/química , Neuritos/fisiologia , Engenharia Tecidual/métodos , Regeneração Nervosa , Crescimento NeuronalRESUMO
Conversion of steel industry off-gases to value-added chemicals enabled by renewable electricity can significantly reduce the environmental burden of the steelmaking process. Herein, we demonstrate that CO2 reduction by H2, both contained in steel mill off-gases, to form syngas via the reverse water-gas-shift reaction is effectively performed by nanosecond pulsed discharges at atmospheric pressure. The experimental results suggest the following: (i) An optimum interelectrode distance exists, maximizing CO2 conversion. (ii) CO2 conversion at constant SEI follows a nonmonotonic trend with H2 excess. CO2 conversion increases with H2 excess up to H2:CO2 = 3:1 upon shifting the chemical equilibrium. At larger H2:CO2, both gas cooling, promoted by the high H2 content, and hindered CO2 collisions in a highly diluted stream hamper CO2 conversion. (iii) SEI enhances CO2 conversion, but the effect decreases with increasing SEI due to equilibrium limitations. A stoichiometric H2:CO2 feed ratio in the plasma reactor is recommended for higher energy efficiency. Intensifying MeOH productivity via SEI elevation is not advised as a 2-fold SEI increase results only in 17% higher MeOH throughput.
Assuntos
Gases , Metanol , Dióxido de Carbono/química , ÁguaRESUMO
Coronavirus disease 2019 (COVID-19) is largely threatening global public health, social stability, and economy. Efforts of the scientific community are turning to this global crisis and should present future preventative measures. With recent trends in polymer science that use plasma to activate and enhance the functionalities of polymer surfaces by surface etching, surface grafting, coating and activation combined with recent advances in understanding polymer-virus interactions at the nanoscale, it is promising to employ advanced plasma processing for smart antiviral applications. This trend article highlights the innovative and emerging directions and approaches in plasma-based surface engineering to create antiviral polymers. After introducing the unique features of plasma processing of polymers, novel plasma strategies that can be applied to engineer polymers with antiviral properties are presented and critically evaluated. The challenges and future perspectives of exploiting the unique plasma-specific effects to engineer smart polymers with virus-capture, virus-detection, virus-repelling, and/or virus-inactivation functionalities for biomedical applications are analysed and discussed.
RESUMO
The reactive chemical species generated by non-equilibrium plasma under atmospheric pressure conditions are key enablers for many emerging applications spanning the fields of biomedicine, manufacturing and agriculture. Despite showing great application potential, insight in to the underpinning reactive species generation and transport mechanisms remains scarce. This contribution focuses on the spatiotemporal behaviour of reactive nitrogen species (RNS) created and transported by an atmospheric pressure air surface barrier discharge (SBD) using both laser induced fluorescence and particle imaging velocimetry measurements combined with experimentally validated numerical modelling. It was observed that highly reactive species such as N are confined to the discharge region while less reactive species such as NO, NO2 and N2O closely followed the induced flow. The concentration of key RNS was found to be in the 10-100 ppm range at a position of 25 mm downstream of the discharge region. A close agreement between the experimental and computational results was achieved and the findings provide a valuable insight in to the role of electrohydrodynamic forces in dictating the spatiotemporal distribution of reactive chemical species beyond the plasma generation region, which is ultimately a key contributor towards downstream treatment uniformity and application efficacy.
RESUMO
A series of CeO2-MnOx for highly efficient catalytical oxidation of carbon monoxide were prepared by citrate sol-gel (C), hydrothermal (H) and hydrothermal-citrate complexation (CH) methods. The outcome indicates that the catalyst generated using the CH technique (CH-1:8) demonstrated the greatest catalytic performance for CO oxidation with a T50 of 98 °C, and also good stability in 1400 min. Compared to the catalysts prepared by C and H method, CH-1:8 has the highest specific surface of 156.1 m2 g-1, and the better reducibility of CH-1:8 was also observed in CO-TPR. It is also observed the high ratio of adsorbed oxygen/lattice oxygen (1.5) in the XPS result. Moreover, characterizations by the TOF-SIMS method indicated that obtained catalyst CH-Ce/Mn = 1:8 had stronger interactions between Ce and Mn oxides, and the redox cycle of Mn3++Ce4+ â Mn4++Ce3+ was a key process for CO adsorption and oxidation process. According to in-situ FTIR, the possible reaction pathway for CO was deduced in three ways. CO directly oxidize with O2 to CO2, CO adsorbed on Mn4+ and Ce3+ reacts with O to form intermediates (COO-) (T > 50 °C) and carbonates (T > 90 °C), which are further oxidized into CO2.
Assuntos
Dióxido de Carbono , Óxidos , Oxirredução , Oxigênio , Monóxido de Carbono , CatáliseRESUMO
The non-thermal plasma (NTP) treatment of food products as an alternative for thermal processing has been investigated over the last few years. This quasi-neutral gas contains a wide variety of reactive oxygen and nitrogen species (RONS), which could be lethal for bacterial cells present in the product. However, apart from only targeting bacteria, the RONS will also interact with components present in the food matrix. Therefore, these food components will protect the microorganisms, and the NTP treatment efficiency will decrease. This effect was investigated by supplementing a plain agar medium with various representative food matrix components. After inoculation with Escherichia coli O157:H7 (STEC) MB3885, the plates were treated for 30 s by a multi-hollow surface dielectric barrier discharge (MSDBD) generated in either dry air or air at 75% humidity, at constant power (25.7 ± 1.7 W). Subsequently, the survival of the cells was quantified. It has been found that the addition of casein hydrolysate (7.1 ± 0.2 m%), starch (2.0 m%), or soybean oil (4.6 m%) decreased the inactivation effect significantly. Food products containing these biomolecules might therefore need a more severe NTP treatment. Additionally, with increasing humidity of the plasma input gas, ozone levels decreased, and the bactericidal effect was generally less pronounced.
RESUMO
Plasma-catalysis has been recognized as a promising method to decompose hazardous volatile organic compounds (VOCs) since many years ago. To understand the fundamental mechanisms of VOCs decomposition by plasma-catalysis systems, both experimental and modeling studies have been extensively carried out. However, literature on summarized modeling methodologies is still scarce. In this short review, we therefore present a comprehensive overview of modeling methodologies ranging from microscopic to macroscopic modeling in plasma-catalysis for VOCs decomposition. The modeling methods of VOCs decomposition by plasma and plasma-catalysis are classified and summarized. The roles of plasma and plasma-catalyst interactions in VOCs decomposition are also critically examined. Taking the current advances in understanding the decomposition mechanisms of VOCs into account, we finally provide our perspectives for future research directions. This short review aims to stimulate the further development of plasma-catalysis for VOCs decomposition in both fundamental studies and practical applications with advanced modeling methods.
RESUMO
Emerging micropollutants (µPs) appearing in water bodies endanger aquatic animals, plants, microorganisms and humans. The nonthermal plasma-based advanced oxidation process is a promising technology for eliminating µPs in wastewater but still needs further development in view of full-scale industrial application. A novel cascade reactor design which consists of an ozonation chamber preceding a dielectric barrier discharge (DBD) plasma reactor with a falling water film on an activated carbon textile (Zorflex®) was used to remove a selection of µPs from secondary municipal wastewater effluent. Compare to previous plasma reactor, molecular oxidants degraded micropollutants again in an ozonation chamber in this study, and the utilization of different reactive oxygen species (ROS) was improved. A gas flow rate of 0.4 standard liter per minute (SLM), a water flow rate of 100 mL min-1, and a discharge power of 25 W are identified as the optimal plasma reactor parameters, and the µP degradation efficiency and electrical energy per order value (EE/O) are 84-98% and 2.4-5.3 kW/m³, respectively. The presence of ROS during plasma treatment was determined in view of the µPs removal mechanisms. The degradation of diuron (DIU), bisphenol A (BPA) and 2-n-octyl-4-isothiazolin-3-one (OIT) was mainly performed in ozonation chamber, while the degradation of atrazine (ATZ), alachlor (ALA) and primidone (PRD) occurred in entire cascade system. The ROS not only degrade the µPs, but also remove nitrite (90.5%), nitrate (69.6%), ammonium (39.6%) and bulk organics (11.4%). This study provides insights and optimal settings for an energy-efficient removal of µPs from secondary effluent using both free radicals and molecular oxidants generated by the plasma in view of full-scale application.
Assuntos
Ozônio , Poluentes Químicos da Água , Purificação da Água , Humanos , Águas Residuárias , Oxidantes , Espécies Reativas de Oxigênio , Água , Poluentes Químicos da Água/análiseRESUMO
Currently, there is considerable interest in seeking an environmentally friendly technique that is neither thermally nor organic solvent-dependent for producing advanced polymer films for food-packaging applications. Among different approaches, plasma polymerization is a promising method that can deposit biodegradable coatings on top of polymer films. In this study, an atmospheric-pressure aerosol-assisted plasma deposition method was employed to develop a poly(ethylene glycol) (PEG)-like coating, which can act as a potential matrix for antimicrobial agents, by envisioning controlled-release food-packaging applications. Different plasma operating parameters, including the input power, monomer flow rate, and gap between the edge of the plasma head and substrate, were optimized to produce a PEG-like coating with a desirable water stability level and that can be biodegradable. The findings revealed that increased distance between the plasma head and substrate intensified gas-phase nucleation and diluted the active plasma species, which in turn led to the formation of a non-conformal rough coating. Conversely, at short plasma-substrate distances, smooth conformal coatings were obtained. Furthermore, at low input powers (<250 W), the chemical structure of the precursor was mostly preserved with a high retention of C-O functional groups due to limited monomer fragmentation. At the same time, these coatings exhibit low stability in water, which could be attributed to their low cross-linking degree. Increasing the power to 350 W resulted in the loss of the PEG-like chemical structure, which is due to the enhanced monomer fragmentation at high power. Nevertheless, owing to the enhanced cross-linking degree, these coatings were more stable in water. Finally, it could be concluded that a moderate input power (250-300 W) should be applied to obtain an acceptable tradeoff between the coating stability and PEG resemblance.
RESUMO
Polymeric surfaces have been increasingly plasma-activated to adopt adequate chemistries, enabling their use in different applications. An unavoidable surface oxygen insertion upon exposure to non-oxygen-containing plasmas was always observed and mainly attributed to in-plasma oxidation stemming from O2 impurities in plasma reactors. Therefore, this work investigates exclusive in-plasma oxidation processes occurring on polyethylene surfaces by purposely admixing different O2 concentrations to medium-pressure Ar and N2 dielectric barrier discharges (base pressure: 10-7 kPa). Hence, distinctive optical emission spectroscopy and in-situ X-ray photoelectron spectroscopy (XPS) data were carefully correlated. Pure N2 discharge triggered an unprecedented surface incorporation of large nitrogen (29%) and low oxygen (3%) amounts. A steep rise in the O-content (10%) at the expense of nitrogen (15%) was detected upon the addition of 6.2 × 10-3% of O2 to the feed gas. When the added O2 exceeded 1%, the N content was completely quenched. Around 8% of surface oxygen was detected in Ar plasma due to high-energy Ar metastables creating more surface radicals that reacted with O2 impurities. When adding only 6.2 × 10-3% of O2 to Ar, the surface O content considerably increased to 12%. Overall, in-plasma oxidation caused by O2 impurities can strikingly change the surface chemistry of N2 and Ar plasma-treated polymers.
RESUMO
Cold plasmas have found their application in a wide range of biomedical fields by virtue of their high chemical reactivity. In the past decades, many attempts have been made to use cold plasmas in wound healing, and within this field, many studies have focused on plasma-induced cell proliferation mechanisms. In this work, one step further has been taken to demonstrate the advanced role of plasma in wound healing. To this end, the simultaneous ability of plasma to induce cell proliferation and permeabilize treated cells has been examined in the current study. The driving force was to advance the wound healing effect of plasma with drug delivery. On this subject, we demonstrate in vitro the healing effect of Ar, Ar+N2 plasma, and their aerosol counterparts. A systematic study has been carried out to study the role of reactive oxygen species (ROS) and reactive nitrogen species (RNS) in cell adhesion, signaling, differentiation, and proliferation. An additional investigation was also performed to study the permeabilization of cells and the delivery of the modeled drug carrier fluorescein isothiocyanate (FITC) labeled dextran into cells upon plasma treatment. Short 35 s plasma treatments were found to promote fibroblast adhesion, migration, signaling, proliferation, and differentiation by means of reactive oxygen and nitrogen species (RONS) created by plasma and deposited into the cell environment. The impact of the plasma downstream products NO2- and NO3- on the expressions of the focal adhesion's genes, syndecans, and collagens was observed to be prominent. On the other hand, the differentiation of fibroblasts to myofibroblasts was mainly initiated by ROS produced by the plasma. In addition, the ability of plasma to locally permeabilize fibroblast cells was demonstrated. During proliferative cell treatment, plasma can simultaneously induce cell membrane permeabilization (d â¼ 7.3 nm) by the species OH and H2O2. The choice for a plasma or a plasma-aerosol configuration thus allows the possibility to change the spatial chemistry of drug delivery molecules and thus to locally deliver drugs. Accordingly, this study offers a pivotal step toward plasma-assisted wound healing advanced by drug delivery.
Assuntos
Peróxido de Hidrogênio , Cicatrização , Espécies Reativas de Oxigênio/metabolismo , Peróxido de Hidrogênio/farmacologia , Colágeno/farmacologia , Espécies Reativas de Nitrogênio/farmacologia , Aerossóis/farmacologiaRESUMO
Nonthermal plasma is a mild processing technology for food preservation. Its impact on lipid oxidation was investigated in this study. Stripped methylesters were considered as a basic lipid model system and were treated by a multihollow surface dielectric barrier discharge. In dry air plasma, O3, ·NO2, ·NO3, and 1O2 were identified as the main reactive species reaching the sample surface. Treatment time was the most prominent parameter affecting lipid oxidation, followed by the (specific) power input and the plasma-sample distance. In humid air plasma, less O3 was detected, but ONOOH and O2NOOH were generated and presumed to play a role in lipid oxidation. Ozone mainly resulted in the formation of carbonyl substances via the trioxolane pathway, while reactive nitrogen species (i.e., ·NO2, ·NO3, ONOOH, and O2NOOH) led to the formation of hydroperoxides. The impact of short-living radicals (e.g., ·O, ·N, ·OH, and ·OOH) was restricted in general, since they dissipated too fast to reach the sample.·NO, HNO3, H2O2, and UV radiation did not induce lipid oxidation. All the reactive species identified in this study were associated with the presence of O2 in the input gas.
Assuntos
Peróxido de Hidrogênio , Dióxido de Nitrogênio , Metabolismo dos Lipídeos , Plasma , LipídeosRESUMO
Non-thermal plasma (NTP) is known as an effective source of a variety of reactive species generated in the gas phase. Nowadays, NTP is gaining increasing interest from the food industry as a microbial inactivation technique. In the present study the effect of inoculation method and matrix on inactivation of Salmonella Typhimurium was examined by treating spread plated agar (2.2 log CFU/sample inactivation by NTP), spot inoculated agar (1.9 log CFU inactivation), glass beads (1.3 log CFU inactivation) and peppercorn (0.2 log CFU inactivation). Furthermore, multiple agar matrices supplemented with low and high concentrations of a certain food component (casein, starch, sunflower oil, vitamin C, sodium pyruvate or grinded peppercorns) were inoculated and treated to determine the effect of those components on NTP efficiency. Although starch, vitamin C and sodium pyruvate had no significant influence on the inactivation degree, the presence of 10% casein (2.1 log CFU/sample less inactivation compared to tryptone soy agar (TSA)), 10% pepper (2.1 log CFU less inactivation) or 1% and 10% sunflower oil (1.6 and 2.1 log CFU less inactivation, respectively) in TSA demonstrated the protective effect of these substances for NTP treatment. These experiments led to the conclusion that low inactivation on produce seemed not to arise from the inoculation method nor from the shape of the produce, but is the result of the food matrix.
Assuntos
Gases em Plasma , Salmonella typhimurium , Contagem de Colônia Microbiana , Manipulação de Alimentos , Microbiologia de AlimentosRESUMO
With the continuous development of catalytic processes in chemistry, biology, organic synthesis, energy generation and many other fields, the design of catalysts with novel properties has become a new paradigm in both science and industry. Nonthermal plasma has aroused extensive interest in the synthesis and modification of catalysts. An increasing number of researchers are using plasma for the modification of target catalysts, such as modifying the dispersion of active sites, regulating electronic properties, enhancing metal-support interactions, and changing the morphology. Plasma provides an alternative choice for catalysts in the modification process of oxidation, reduction, etching, coating, and doping and is especially helpful for unfavourable thermodynamic processes or heat-sensitive reactions. This review focuses on the following points: (i) the fundamentals behind the nonthermal plasma modification of catalysts; (ii) the latest research progress on the application of plasma modified catalysts; and (iii) main challenges in the field and a vision for future development.
Assuntos
Metais , Catálise , Metais/química , Oxirredução , TermodinâmicaRESUMO
Industrial ammonia production without CO2 emission and with low energy consumption is one of the technological grand challenges of this age. Current Haber-Bosch ammonia mass production processes work with a thermally activated iron catalyst needing high pressure. The need for large volumes of hydrogen gas and the continuous operation mode render electrification of Haber-Bosch plants difficult to achieve. Electrochemical solutions at low pressure and temperature are faced with the problematic inertness of the nitrogen molecule on electrodes. Direct reduction of N2 to ammonia is only possible with very reactive chemicals such as lithium metal, the regeneration of which is energy intensive. Here, the attractiveness of an oxidative route for N2 activation was presented. N2 conversion to NOx in a plasma reactor followed by reduction with H2 on a heterogeneous catalyst at low pressure could be an energy-efficient option for small-scale distributed ammonia production with renewable electricity and without intrinsic CO2 footprint.
Assuntos
Amônia , Nitrogênio , Amônia/química , Dióxido de Carbono , Catálise , Nitrogênio/química , OxirreduçãoRESUMO
The possible benefits of an atmospheric pressure plasma jet skin treatment have been tested in vivo on mouse skin. Many studies have been conducted in vitro on mouse skin cells, but only a few in vivo where, due to the complexity of the biological system, plasma can cause severe damages. For this reason, we investigated how kHz plasma generated in a jet that is known to inflict skin damage interacts with mouse skin and explored how we can reduce the skin damage. First, the focus was on exploring plasma effects on skin damage formation with different plasma gases and jet inclinations. The results pointed to the perpendicular orientation of a He plasma jet as the most promising condition with the least skin damage. Then, the skin damage caused by a He plasma jet was explored, focusing on damage mitigation with different liquid interfaces applied to the treatment site, adding N2 to the gas mixture, or alternating the gas flow dynamics by elongating the jet's glass orifice with a funnel. All these mitigations proved highly efficient, but the utmost benefits for skin damage reduction were connected to skin temperature reduction, the reduction in reactive oxygen species (ROS), and the increase in reactive nitrogen species (RNS).
Assuntos
Pressão Atmosférica , Gases em Plasma , Animais , Gases , Camundongos , Gases em Plasma/farmacologia , Espécies Reativas de Nitrogênio , Espécies Reativas de OxigênioRESUMO
The effect of different crystal phases, i.e. spinel phase (CuMn2O4) and amorphous phase (Cu0.2MnOx), was explored in Cu-Mn catalytic ozonation of toluene. The toluene removal efficiency followed the order of Cu0.2MnOx (91.2%) Ë CuMn2O4 (74.5%) Ë commercial catalyst Cu0.3MnOx (70.3%) in 130 min, and the higher CO2 yield (67.6%) could be also observed using Cu0.2MnOx. In order to investigate the effect of phases on the toluene degradation pathway, the intermediates and byproducts were identified by DRIFTS, GC-MS, and TOF-SIMS. No obvious difference was observed in the distribution of byproducts, except for the quantities, suggesting the discrepancy of oxidation rate. On the other hand, the catalysts were characterized before and after the ozonation process by TEM, BET, XPS, XRD, EPR, TGA, and TPR. It was proposed that for amorphous catalysts, the oxygen vacancy (Vo) helped the chemisorption of toluene, and adjacent Mn reacted as the main active site for the ozonation process. While, the redox pair of Cu+/Mn4+ and Cu2+/(Mn3+, Mn2+) in the spinel phase plays an important role in the generation of oxygen vacancies for O3 decomposition.
Assuntos
Ozônio , Tolueno , Catálise , OxirreduçãoRESUMO
Electrocatalytic urea oxidation reaction (UOR) is regarded as an effective yet challenging approach for the degradation of urea in wastewater into harmless N2 and CO2. To overcome the sluggish kinetics, catalytically active sites should be rationally designed to maneuver the multiple key steps of intermediate adsorption and desorption. Herein, we demonstrate that metal-organic frameworks (MOFs) can provide an ideal platform for tailoring binary active sites to facilitate the rate-determining steps, achieving remarkable electrocatalytic activity toward UOR. Specifically, the MOF (namely, NiMn0.14-BDC) based on Ni/Mn sites and terephthalic acid (BDC) ligands exhibits a low voltage of 1.317 V to deliver a current density of 10 mA cm-2. As a result, a high turnover frequency (TOF) of 0.15 s-1 is achieved at a voltage of 1.4 V, which enables a urea degradation rate of 81.87% in 0.33 M urea solution. The combination of experimental characterization with theoretical calculation reveals that the Ni and Mn sites play synergistic roles in maneuvering the evolution of urea molecules and key reaction intermediates during the UOR, while the binary Ni/Mn sites in MOF offer the tunability for electronic structure and d-band center impacting on the intermediate evolution. This work provides important insights into active site design by leveraging MOF platform and represents a solid step toward highly efficient UOR with MOF-based electrocatalysts.
RESUMO
Experimental data are presented on the evolution of a helium atmospheric pressure plasma jet driven by a tailored voltage waveform generated as bunches of voltage pulses consisting of a superposition of [Formula: see text] kHz bipolar square pulses and [Formula: see text] kHz oscillations. The characteristics of directed ionization waves (guided streamers) are compared for bunches with different first pulse polarities and different bunch duty cycles. The longest and brightest streamers are achieved at the voltage bunch with the first negative pulse and a minimum duty cycle. The dynamics of streamers at the voltage bunch with the first positive pulse are characterized by the shortest length and a lower brightness. The plasma jet length can be smoothly changed by varying the number of pulses in the bunch and the polarity of the first pulse. It is thus possible to precisely localize the region of a strong field in space by combining the parameters of the applied voltage (the duty cycle and polarity of the first pulse of a bunch) with a stepwise propagation mode of a guided streamer.
RESUMO
A three series of terpolymers composed of the blocks PTMO (MPTMO = 1000 g/mol) or DLAol (MDLAol = 540 g/mol), PA12 (MPA12 = 2000 g/mol) and xGT (DPxGT = 2) with various chemical compositions of ester block were obtained. The series differ in the chemical structure of the flexible block and weight content of the soft phase. The effect of the number of carbons dividing the terephthalate groups on the synthesis, structure and properties of these elastomers has been investigated. To confirm assumed chemical structure Carbon-13 (13C NMR) and Proton (1H NMR) Nuclear Magnetic Resonance and Fourier-transform Infrared Spectroscopy (FT-IR) were used. The influence of chemical compositions of ester block on the thermal properties and the phase separation of obtained systems were defined by Differential Scanning Calorimetry (DSC), Dynamic Mechanical Thermal Analysis (DMTA) and Wide Angle X-ray Scattering (WAXS). The mechanical and elastic properties were evaluated.