Fluoride-Incorporated Apatite Coating on Collagen Sponge as a Carrier for Basic Fibroblast Growth Factor.

Coating layers consisting of a crystalline apatite matrix with immobilized basic fibroblast growth factor (bFGF) can release bFGF, thereby enhancing bone regeneration depending on their bFGF content. We hypothesized that the incorporation of fluoride ions into apatite crystals would enable the tailored release of bFGF from the coating layer depending on the layer's fluoride content. In the present study, coating layers consisting of fluoride-incorporated apatite (FAp) crystals with immobilized bFGF were coated on a porous collagen sponge by a precursor-assisted biomimetic process using supersaturated calcium phosphate solutions with various fluoride concentrations. The fluoride content in the coating layer increased with the increasing fluoride concentration of the supersaturated solution. The increased fluoride content in the coating layer reduced its solubility and suppressed the burst release of bFGF from the coated sponge into a physiological salt solution. The bFGF release was caused by the partial dissolution of the coating layer and, thus, accompanied by the fluoride release. The concentrations of released bFGF and fluoride were controlled within the estimated effective ranges in enhancing bone regeneration. These findings provide useful design guidelines for the construction of a mineralized, bFGF-releasing collagen scaffold that would be beneficial for bone tissue engineering, although further in vitro and in vivo studies are warranted.

Periodontal tissue engineering using an apatite/collagen scaffold obtained by a plasma- and precursor-assisted biomimetic process.

BACKGROUND AND OBJECTIVES: In the treatment of severe periodontal destruction, there is a strong demand for advanced scaffolds that can regenerate periodontal tissues with adequate quality and quantity. Recently, we developed a plasma- and precursor-assisted biomimetic process by which a porous collagen scaffold (CS) could be coated with low-crystalline apatite. The apatite-coated collagen scaffold (Ap-CS) promotes cellular ingrowth within the scaffold compared to CS in rat subcutaneous tissue. In the present study, the osteogenic activity of Ap-CS was characterized by cell culture and rat skull augmentation tests. In addition, the periodontal tissue reconstruction with Ap-CS in a beagle dog was compared to that with CS. METHODS: The plasma- and precursor-assisted biomimetic process was applied to CS to obtain Ap-CS with a low-crystalline apatite coating. The effects of apatite coating on the scaffold characteristics (i.e., surface morphology, water absorption, Ca release, protein adsorption, and enzymatic degradation resistance) were assessed. Cyto-compatibility and the osteogenic properties of Ap-CS and CS were assessed in vitro using preosteoblastic MC3T3-E1 cells. In addition, we performed in vivo studies to evaluate bone augmentation and periodontal tissue reconstruction with Ap-CS and CS in a rat skull and canine furcation lesion, respectively. RESULTS: As previously reported, the plasma- and precursor-assisted biomimetic process generated a low-crystalline apatite layer with a nanoporous structure that uniformly covered the Ap-CS surface. Ap-CS showed significantly higher water absorption, Ca release, lysozyme adsorption, and collagenase resistance than CS. Cell culture experiments revealed that Ap-CS was superior to CS in promoting the osteoblastic differentiation of MC3T3-E1 cells while suppressing their proliferation. Additionally, Ap-CS significantly promoted (compared to CS) the augmentation of the rat skull bone and showed the potential to regenerate alveolar bone in a dog furcation defect. CONCLUSION: Ap-CS fabricated by the plasma- and precursor-assisted biomimetic process provided superior promotion of osteogenic differentiation and bone neoformation compared to CS.

Fabrication of Ciprofloxacin-Immobilized Calcium Phosphate Particles for Dental Drug Delivery.

Calcium phosphate (CaP) particles immobilizing antibacterial agents have the potential to be used as dental disinfectants. In this study, we fabricated CaP particles with immobilized ciprofloxacin (CF), a commonly prescribed antibacterial agent, via a coprecipitation process using a supersaturated CaP solution. As the aging time in the coprecipitation process increased from 2 to 24 h, the CaP phase in the resulting particles transformed from amorphous to low-crystalline hydroxyapatite, and their Ca/P elemental ratio, yield, and CF content increased. Despite the higher CF content, the particles aged for 24 h displayed a slower release of CF in a physiological salt solution, most likely owing to their crystallized matrix (less soluble hydroxyapatite), than those aged for 2 h, whose matrix was amorphous CaP. Both particles exhibited antibacterial and antibiofilm activities along with an acid-neutralizing effect against the major oral bacteria, Streptococcus mutans, Porphyromonas gingivalis, and Actinomyces naeslundii, in a dose-dependent manner, although their dose-response relationship was slightly different. The aging time in the coprecipitation process was identified as a governing factor affecting the physicochemical properties of the resulting CF-immobilized CaP particles and their functionality as a dental disinfectant.

Drone-Based Harvest Data Prediction Can Reduce On-Farm Food Loss and Improve Farmer Income.

On-farm food loss (i.e., grade-out vegetables) is a difficult challenge in sustainable agricultural systems. The simplest method to reduce the number of grade-out vegetables is to monitor and predict the size of all individuals in the vegetable field and determine the optimal harvest date with the smallest grade-out number and highest profit, which is not cost-effective by conventional methods. Here, we developed a full pipeline to accurately estimate and predict every broccoli head size (n > 3,000) automatically and nondestructively using drone remote sensing and image analysis. The individual sizes were fed to the temperature-based growth model and predicted the optimal harvesting date. Two years of field experiments revealed that our pipeline successfully estimated and predicted the head size of all broccolis with high accuracy. We also found that a deviation of only 1 to 2 days from the optimal date can considerably increase grade-out and reduce farmer's profits. This is an unequivocal demonstration of the utility of these approaches to economic crop optimization and minimization of food losses.

Rose bengal-decorated rice husk-derived silica nanoparticles enhanced singlet oxygen generation for antimicrobial photodynamic inactivation.

Rice husks are well known for their high silica content, and the RH-derived silica nanoparticles (RH NPs) are amorphous and biocompatible; therefore, they are suitable raw materials for biomedical applications. In this study, rose bengal-impregnated rice husk nanoparticles (RB-RH NPs) were prepared for their potential photosensitization and 1O2 generation as antimicrobial photodynamic inactivation. RB is a halogen-xanthene type's photosensitizer showing high singlet oxygen efficiency, and the superior photophysical properties are desirable for RB in the antimicrobial photodynamic inactivation of bacteria. To enhance the binding of anionic RB to RH NPs, we conducted cationization for the RH NPs using polyethyleneimine (PEI). The control of the RB adsorption state on cationic PEI-modified RH NPs was essential for RB RH-NP photosensitizers to obtain efficient 1O2 generation. Minimizing RB aggregation allowed highly efficient 1O2 production from RB-RH NPs at the molar ratio of RB with the PEI, XRB/PEI. = 0.1. The RB-RH NPs have significant antimicrobial activity against Streptococcus mutans compared to free RB after white light irradiation. The RB-RH NP-based antimicrobial photodynamic inactivation can be employed effectively in treating Streptococcus mutans for dental applications. Supplementary Information: The online version contains supplementary material available at 10.1007/s10853-023-08194-z.

Water-resistant antibacterial properties of a graphene oxide/cetylpyridinium chloride complex formed on medical gauze fibers.

OBJECTIVES: Graphene oxide (GO) is a nanocarbon material with a high aspect ratio (width:thickness) and abundant anionic functional groups on its surface. In this study, we attached GO to the surface of medical gauze fibers, constructed a complex with a cationic surface active agent (CSAA), and demonstrated that the treated gauze exhibits antibacterial activity even after rinsing with water. METHODS: Medical gauze was immersed in GO dispersion (0.001%, 0.01%, and 0.1%), rinsed with water, dried, and subjected to the Raman spectroscopy analysis. Subsequently, the gauze treated with 0.001% GO dispersion was immersed in 0.1% cetylpyridinium chloride (CPC) solution, immediately rinsed with water, and dried. Untreated, GO-only, and CPC-only gauzes were prepared for comparison. Each gauze was placed in a culture well, seeded with Escherichia coli or Actinomyces naeslundii, and turbidity was measured after 24 h of incubation. RESULTS: The Raman spectroscopy analysis of the gauze after immersion and rinsing showed a G band peak, indicating that GO remained on the surface of the gauze. The turbidity measurements indicated that GO/CPC-treated gauze (GO-treated and rinsed, followed by CPC-treatment and rinsing) significantly decreased turbidity compared to the other gauzes (P < 0.05), suggesting that the GO/CPC complex remained on the gauze fibers even after water rinsing and showed antibacterial activity. CONCLUSIONS: The GO/CPC complex imparts water-resistant antibacterial properties to gauze and has the potential to be widely used for the antimicrobial treatment of clothes.

Periodontal tissue regeneration by recombinant human collagen peptide granules applied with ß-tricalcium phosphate fine particles.

OBJECTIVES: Recombinant human collagen peptide (RCP) is a recombinantly created xeno-free biomaterial enriched in arginine-glycine-aspartic acid sequences with good processability whose use for regenerative medicine applications is under investigation. The biocompatibility and osteogenic ability of RCP granules combined with ß-tricalcium phosphate (TCP) submicron particles (ß-TCP/RCP) were recently demonstrated. In the present study, ß-TCP/RCP was implanted into experimental periodontal tissue defects created in beagles to investigate its regenerative effects. METHODS: An RCP solution was lyophilized, granulated, and thermally cross-linked into particles approximately 1 mm in diameter. ß-TCP dispersion (1 wt%; 500 µL) was added to 100 mg of RCP granules to form ß-TCP/RCP. A three-walled intrabony defect (5 mm × 3 mm × 4 mm) was created on the mesial side of the mandibular first molar and filled with ß-TCP/RCP. RESULTS: A micro-computed tomography image analysis performed at 8 weeks postoperative showed a significantly greater amount of new bone after ß-TCP/RCP grafting (2.2-fold, P < 0.05) than after no grafting. Histological findings showed that the transplanted ß-TCP/RCP induced active bone-like tissue formation including tartaric acid-resistant acid phosphatase- and OCN-positive cells as well as bioabsorbability. Ankylosis did not occur, and periostin-positive periodontal ligament-like tissue formation was observed. Histological measurements performed at 8 weeks postoperative revealed that ß-TCP/RCP implantation formed 1.7-fold more bone-like tissue and 2.1-fold more periodontal ligament-like tissue than the control condition and significantly suppressed gingival recession and epithelial downgrowth (P < 0.05). CONCLUSIONS: ß-TCP/RCP implantation promoted bone-like and periodontal ligament-like tissue formation, suggesting its efficacy as a periodontal tissue regenerative material.

Sustained antibacterial coating with graphene oxide ultrathin film combined with cationic surface-active agents in a wet environment.

Antimicrobial surfactants contained in mouthrinse have excellent efficacy, but are not retained on the tooth surface (are rinsed away) due to their low water resistance and thus do not exhibit sustained antibacterial activity. We have developed a new coating method using graphene oxide (GO) that retains the surfactant on the tooth surface even after rinsing with water, thus providing a sustained antibacterial effect. Ultra-thin films of GO and an antimicrobial agent were prepared by (1) applying GO to the substrate surface, drying, and thoroughly rinsing with water to remove excess GO to form an ultrathin film (almost a monolayer, transparent) on the substrate surface, then (2) applying antimicrobial cationic surface active agents (CSAAs) on the GO film to form a composite coating film (GO/CSAA). GO/CSAA formation was verified by scanning electron microscopy, Raman spectroscopy, X-ray photoelectron spectroscopy, and ζ-potential and contact angle measurements. GO/CSAA was effective at inhibiting the growth of oral pathogens for up to 7 days of storage in water, and antibacterial activity was recovered by reapplication of the CSAA. Antibacterial GO/CSAA films were also formed on a tooth substrate. The results suggest that GO/CSAA coatings are effective in preventing oral infections.

Evaluation of antibacterial and cytocompatible properties of multiple-ion releasing zinc-fluoride glass nanoparticles.

Zinc-fluoride glass nanoparticles (Zinc-F) release several ions, such as fluoride, zinc and calcium ions, through acid-base reactions. The aim of this study was to evaluate the antibacterial and cytotoxic properties of Zinc-F. Antibacterial tests showed that a Zinc-F eluting solution significantly reduced the turbidity and colony-forming units of Streptococcus mutans and Actinomyces naeslundii, compared to that of calcium-fluoroaluminosilicate glass nanoparticles without zinc ions. In live/dead staining, Zinc-F eluate significantly decreased green-stained bacterial cells, indicating live cells, compared with the control (no application). Human dentin coated with Zinc-F showed suppressed S. mutans and A. naeslundii biofilm formation. Additionally, Zinc-F eluate showed low cytotoxic effects in osteoblastic and fibroblastic cells. Therefore, our findings suggested that Zinc-F exhibits antibacterial and biocompatible properties through multiple-ion release.

Antibacterial coating of tooth surface with ion-releasing pre-reacted glass-ionomer (S-PRG) nanofillers.

OBJECTIVES: Surface pre-reacted glass-ionomer (S-PRG) fillers release antibacterial borate and fluoride ions. We fabricated nanoscale S-PRG fillers (S-PRG nanofillers) for antibacterial coating of tooth surfaces and assessed the antibacterial effects of this coating in vitro. In addition, we creating a canine model of periodontitis to evaluate the effectiveness of S-PRG nanofiller application on tooth roots and improvement of periodontal parameters. METHODS: Human dentin blocks were coated with S-PRG nanofiller (average particle size: 0.48 µm) and then characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectrometer (EDX), and ion-releasing test. Antibacterial effects of dentin blocks coated with S-PRG nanofiller were examined using bacterial strains, Streptococcus mutans and Actinomyces naeslundii. Next, we created an experimental model of periodontitis in furcation of premolars of beagle dogs. Then, S-PRG nanofiller coating was applied onto exposed tooth root surfaces. Periodontal parameters, gingival index (GI), bleeding on probing (BOP), probing pocket depth (PPD), and clinical attachment level (CAL), were measured from baseline until 4 weeks. In addition, bone healing was radiographically and histologically examined. RESULTS: SEM and EDX revealed that S-PRG nanofillers uniformly covered the dentin surface after coating. Dentin blocks coated with S-PRG nanofiller showed ion-releasing property, bacterial growth inhibition, and sterilization effects. In the experimental periodontitis model, S-PRG nanofiller coating significantly reduced clinical inflammatory parameters, such as GI (P < 0.01) and BOP (P < 0.05), compared to uncoated samples. In addition, PPD and CAL significantly decreased by S-PRG nanofiller coating (2 weeks: P < 0.05; 3 and 4 weeks: P < 0.01), suggesting the improvement of periodontitis. Micro-CT and histology revealed that bone healing of furcation defects was enhanced by S-PRG nanofiller coating. CONCLUSION: S-PRG nanofiller coating provides antibacterial effects to tooth surfaces and improves clinical parameters of periodontitis.

Safety, Tolerability, Pharmacokinetics, and Food Effects on TAC-302 in Healthy Participants: Randomized, Double-Blind, Placebo-Controlled, Single-Dose and Multiple-Dose Studies.

TAC-302 stimulates neurite outgrowth activity and is expected to restore urinary function in patients with lower urinary tract dysfunction. We conducted 2 phase 1, randomized, placebo-controlled studies to confirm the safety and pharmacokinetics (PK) of TAC-302 in healthy adult Japanese male volunteers. In the first-in-human single-dose study (n = 60), TAC-302 was administered at doses from 100 to 1200 mg after an overnight fast. The effects of a meal on the PK of TAC-302 400 mg were also examined. A multiple-dose study (n = 36) evaluated the effects of meal fat content on the PK of single doses of TAC-302 (100, 200, or 400 mg) and multiple doses of TAC-302 administered for 5 days (100, 200, and 400 mg twice daily). TAC-302 showed linear PK up to doses of 1200 mg in the fasting state, and across the dose range of 100-400 mg in the fed state. No accumulation of TAC-302 was observed. Food, particularly with high fat content, increased TAC-302 plasma concentrations. No differences were observed in the adverse event incidence between the TAC-302 and placebo groups in either study. TAC-302 showed a wide safety margin.

Bone forming ability of recombinant human collagen peptide granules applied with ß-tricalcium phosphate fine particles.

Recombinant human collagen peptide, developed based on human collagen type I, contains an arginyl-glycyl-aspartic acid (RGD)-rich motif to enhance cell behavior and is anticipated as a xeno-free polymer material for use in tissue engineering. We fabricated granules containing recombinant human collagen peptide (RCP) applied with beta-tricalcium phosphate fine particles (RCP/ß-TCP) as bone filling scaffold material and assessed the bone forming ability of RCP/ß-TCP. Recombinant peptide was thermal crosslinked and freeze-dried to prepare RCP. An aqueous dispersion of ß-TCP fine particles was added to RCP to obtain RCP/ß-TCP. Subsequently, RCP/ß-TCP were characterized using scanning electron microscopy (SEM), energy dispersive X-ray spectrometry (EDX), and cell culture assessments. Furthermore, RCP/ß-TCP were implanted into rat cranial bone defects for radiographic and histological evaluations. In SEM and EDX analyses of RCP/ß-TCP, ß-TCP particles dose-dependently covered the surface of RCP. Cell culture tests showed that RCP/ß-TCP remarkably promoted proliferation and mRNA expression of various genes, such as integrin ß1 and osteogenic markers, of osteoblastic MC3T3-E1 cells. Histomorphometric assessment at 4 weeks showed that RCP/ß-TCP significantly promoted new skull bone formation compared to RCP (p < 0.05) and control (no application) (p < 0.01). Accordingly, these findings suggest RCP/ß-TCP possess bone forming capability and would be beneficial for bone tissue engineering therapy.

Comparative biological assessments of endodontic root canal sealer containing surface pre-reacted glass-ionomer (S-PRG) filler or silica filler.

Surface pre-reacted glass-ionomer (S-PRG) filler releases several ions, such as fluoride, borate and strontium ions, to exert bioactive effects. We fabricated an endodontic root canal sealer containing S-PRG fillers (S-PRG sealer) and then evaluated the antibacterial and anti-inflammatory properties of S-PRG sealer compared with sealer containing conventional silica fillers (silica sealer). Antibacterial tests showed that S-PRG sealer significantly reduced the turbidity of Enterococcus faecalis compared with silica sealer. Implantation of S-PRG or silica sealer blocks in rat subcutaneous tissue showed that S-PRG sealer decreased the proinflammatory response compared with silica sealer at 10 days post-implantation. In addition, immunostaining revealed that infiltration of CD68- and peroxidase-positive cells around the S-PRG sealer was significantly lower than that in silica sealer. Therefore, it was suggested that S-PRG sealer exhibits antibacterial and anti-inflammatory effects.

Calcium phosphate coating on dental composite resins by a laser-assisted biomimetic process.

OBJECTIVES: Dental composite resins with better biocompatibility and osteoconductivity have been sought in endodontic treatments. This study aimed to develop a technique to produce the osteoconductive resin surfaces through calcium phosphate (CaP) coating using a laser-assisted biomimetic (LAB) process. METHODS: Light-cured, acrylic-based composite resins were used as substrates. The resin substrate was subjected to a LAB process comprising Nd:YAG pulsed laser irradiation in a supersaturated CaP solution. The LAB-processed substrate was immersed for 3 days in a simulated body fluid (SBF) for the preliminary osteoconductivity assessment. RESULTS: After irradiation for 30 min, the resin surfaces were partly coated with a newly formed CaP layer. The coating layer contained hydroxyapatite as the main crystalline phase and the coating coverage depended on the laser wavelength and the type of resin. The LAB-processed CaP-coated surface exhibited apatite-forming ability in SBF. CONCLUSIONS: LAB process is effective for CaP coating on light-cured dental composite resins and improving their osteoconductivity. CLINICAL SIGNIFICANCE: The LAB process is a potential new tool to create a cementum-like osteoconductive surface on dental composite resins.

Characterization and evaluation of graphene oxide scaffold for periodontal wound healing of class II furcation defects in dog.

INTRODUCTION: The 3-dimensional scaffold plays a key role in volume and quality of repair tissue in periodontal tissue engineering therapy. We fabricated a novel 3D collagen scaffold containing carbon-based 2-dimensional layered material, named graphene oxide (GO). The aim of this study was to characterize and assess GO scaffold for periodontal tissue healing of class II furcation defects in dog. MATERIALS AND METHODS: GO scaffolds were prepared by coating the surface of a 3D collagen sponge scaffold with GO dispersion. Scaffolds were characterized using cytotoxicity and tissue reactivity tests. In addition, GO scaffold was implanted into dog class II furcation defects and periodontal healing was investigated at 4 weeks postsurgery. RESULTS: GO scaffold exhibited low cytotoxicity and enhanced cellular ingrowth behavior and rat bone forming ability. In addition, GO scaffold stimulated healing of dog class II furcation defects. Periodontal attachment formation, including alveolar bone, periodontal ligament-like tissue, and cementum-like tissue, was significantly increased by GO scaffold implantation, compared with untreated scaffold. CONCLUSION: The results suggest that GO scaffold is biocompatible and possesses excellent bone and periodontal tissue formation ability. Therefore, GO scaffold would be beneficial for periodontal tissue engineering therapy.

In Vitro and in Vivo Analysis of Mineralized Collagen-Based Sponges Prepared by a Plasma- and Precursor-Assisted Biomimetic Process.

Three-dimensional (3D) porous scaffolds for supporting cell adhesion and growth play a vital role in tissue engineering applications. In the present study, three different collagen-based 3D sponges were functionalized by apatite coating. The sponges were coated with apatite on their outer and inner surfaces while retaining their interconnecting pores. To achieve this, we employed a vacuum degassing system in our plasma- and precursor-assisted biomimetic process using a supersaturated calcium phosphate solution. The resulting apatite-coated sponges (mineralized sponges) showed better cell adhesion properties in vitro for osteoblast-like MC3T3-E1 cells compared to that of uncoated sponges. The three mineralized sponges were implanted in the subcutaneous tissue of rats. Upon histological evaluation after 10 days, the mineralized sponges showed cell in-growth rates that were approximately 4-fold greater than those of the untreated sponges without any notable inflammatory reactions. As these sponges are composed of clinically approved collagen-based frameworks and possess a 3D porous structure with a mineralized surface appropriate for cell adhesion and internalization, further in vitro and in vivo studies should be conducted regarding tissue engineering applications.

Antimicrobial photodynamic activity and cytocompatibility of Au25(Capt)18 clusters photoexcited by blue LED light irradiation.

Antimicrobial photodynamic therapy (aPDT) has beneficial effects in dental treatment. We applied captopril-protected gold (Au25(Capt)18) clusters as a novel photosensitizer for aPDT. Photoexcited Au clusters under light irradiation generated singlet oxygen (1O2). Accordingly, the antimicrobial and cytotoxic effects of Au25(Capt)18 clusters under dental blue light-emitting diode (LED) irradiation were evaluated. 1O2 generation of Au25(Capt)18 clusters under blue LED irradiation (420-460 nm) was detected by a methotrexate (MTX) probe. The antimicrobial effects of photoexcited Au clusters (0, 5, 50, and 500 µg/mL) on oral bacterial cells, such as Streptococcus mutans, Aggregatibacter actinomycetemcomitans, and Porphyromonas gingivalis, were assessed by morphological observations and bacterial growth experiments. Cytotoxicity testing of Au clusters and blue LED irradiation was then performed against NIH3T3 and MC3T3-E1 cells. In addition, the biological performance of Au clusters (500 µg/mL) was compared to an organic dye photosensitizer, methylene blue (MB; 10 and 100 µg/mL). We confirmed the 1O2 generation ability of Au25(Capt)18 clusters through the fluorescence spectra of oxidized MTX. Successful application of photoexcited Au clusters to aPDT was demonstrated by dose-dependent decreases in the turbidity of oral bacterial cells. Morphological observation revealed that application of Au clusters stimulated destruction of bacterial cell walls and inhibited biofilm formation. Aggregation of Au clusters around bacterial cells was fluorescently observed. However, photoexcited Au clusters did not negatively affect the adhesion, spreading, and proliferation of mammalian cells, particularly at lower doses. In addition, application of Au clusters demonstrated significantly better cytocompatibility compared to MB. We found that a combination of Au25(Capt)18 clusters and blue LED irradiation exhibited good antimicrobial effects through 1O2 generation and biosafe characteristics, which is desirable for aPDT in dentistry.

Dose effects of beta-tricalcium phosphate nanoparticles on biocompatibility and bone conductive ability of three-dimensional collagen scaffolds.

Three-dimensional collagen scaffolds coated with beta-tricalcium phosphate (ß-TCP) nanoparticles reportedly exhibit good bioactivity and biodegradability. Dose effects of ß-TCP nanoparticles on biocompatibility and bone forming ability were then examined. Collagen scaffold was applied with 1, 5, 10, and 25 wt% ß-TCP nanoparticle dispersion and designated TCP1, TCP5, TCP10, and TCP25, respectively. Compressive strength, calcium ion release and enzyme resistance of scaffolds with ß-TCP nanoparticles applied increased with ß-TCP dose. TCP5 showed excellent cell-ingrowth behavior in rat subcutaneous tissue. When TCP10 was applied, osteoblastic cell proliferation and rat cranial bone augmentation were greater than for any other scaffold. The bone area of TCP10 was 7.7-fold greater than that of non-treated scaffold. In contrast, TCP25 consistently exhibited adverse biological effects. These results suggest that the application dose of ß-TCP nanoparticles affects the scaffold bioproperties; consequently, the bone conductive ability of TCP10 was remarkable.

Graphene oxide scaffold accelerates cellular proliferative response and alveolar bone healing of tooth extraction socket.

Graphene oxide (GO) consisting of a carbon monolayer has been widely investigated for tissue engineering platforms because of its unique properties. For this study, we fabricated a GO-applied scaffold and assessed the cellular and tissue behaviors in the scaffold. A preclinical test was conducted to ascertain whether the GO scaffold promoted bone induction in dog tooth extraction sockets. For this study, GO scaffolds were prepared by coating the surface of a collagen sponge scaffold with 0.1 and 1 µg/mL GO dispersion. Scaffolds were characterized using scanning electron microscopy (SEM), physical testing, cell seeding, and rat subcutaneous implant testing. Then a GO scaffold was implanted into a dog tooth extraction socket. Histological observations were made at 2 weeks postsurgery. SEM observations show that GO attached to the surface of collagen scaffold struts. The GO scaffold exhibited an interconnected structure resembling that of control subjects. GO application improved the physical strength, enzyme resistance, and adsorption of calcium and proteins. Cytocompatibility tests showed that GO application significantly increased osteoblastic MC3T3-E1 cell proliferation. In addition, an assessment of rat subcutaneous tissue response revealed that implantation of 1 µg/mL GO scaffold stimulated cellular ingrowth behavior, suggesting that the GO scaffold exhibited good biocompatibility. The tissue ingrowth area and DNA contents of 1 µg/mL GO scaffold were, respectively, approximately 2.5-fold and 1.4-fold greater than those of the control. Particularly, the infiltration of ED2-positive (M2) macrophages and blood vessels were prominent in the GO scaffold. Dog bone-formation tests showed that 1 µg/mL GO scaffold implantation enhanced bone formation. New bone formation following GO scaffold implantation was enhanced fivefold compared to that in control subjects. These results suggest that GO was biocompatible and had high bone-formation capability for the scaffold. The GO scaffold is expected to be beneficial for bone tissue engineering therapy.

Collagen Hydrogel Scaffold and Fibroblast Growth Factor-2 Accelerate Periodontal Healing of Class II Furcation Defects in Dog.

OBJECTIVE: Collagen hydrogel scaffold exhibits bio-safe properties and facilitates periodontal wound healing. However, regenerated tissue volume is insufficient. Fibroblast growth factor-2 (FGF2) up-regulates cell behaviors and subsequent wound healing. We evaluated whether periodontal wound healing is promoted by application of collagen hydrogel scaffold in combination with FGF2 in furcation defects in beagle dogs. METHODS: Collagen hydrogel was fabricated from bovine type I collagen with an ascorbate-copper ion cross-linking system. Collagen hydrogel was mingled with FGF2 and injected into sponge-form collagen. Subsequently, FGF2 (50 µg)/collagen hydrogel scaffold and collagen hydrogel scaffold alone were implanted into class II furcation defects in dogs. In addition, no implantation was performed as a control. Histometric parameters were assessed at 10 days and 4 weeks after surgery. RESULT: FGF2 application to scaffold promoted considerable cell and tissue ingrowth containing numerous cells and blood vessel-like structure at day 10. At 4 weeks, reconstruction of alveolar bone was stimulated by implantation of scaffold loaded with FGF2. Furthermore, periodontal attachment, consisting of cementum-like tissue, periodontal ligament-like tissue and Sharpey's fibers, was also repaired, indicating that FGF2-loaded scaffold guided self-assembly and then re-established the function of periodontal organs. Aberrant healing, such as ankylosis and root resorption, was not observed. CONCLUSION: FGF2-loaded collagen hydrogel scaffold possessed excellent biocompatibility and strongly promoted periodontal tissue engineering, including periodontal attachment re-organization.