Microbial surfactants in nanotechnology: recent trends and applications.

The interest in nano-sized materials to develop novel products has increased exponentially in the last decade, together with the search for green methods for their synthesis. An alternative to contribute to a more sustainable approach is the use of microbial-derived molecules to assist nanomaterial synthesis. In this sense, biosurfactants (BSs) have emerged as eco-friendly substitutes in nano-sized materials preparation. The inherent amphiphilic and self-assembly character of BSs associated with their low eco-toxicity, biodegradability, biocompatibility, structural diversity, biological activity, and production from renewable resources are potential advantages over chemically-derived surfactants. In nanotechnology, these versatile molecules play multiple roles. In nanoparticle (NP) synthesis, they act as capping and reducing agents and they also provide self-assembly structures to encapsulation, functionalization, or templates and act as emulsifiers in nanoemulsions. Moreover, BSs can also play as active compounds owing to their intrinsic biological properties. This review presents the recent trends in the development of BS-based nanostructures and their biomedical and environmental applications. Fundamental aspects regarding their antimicrobial and anticancer activities are also discussed.

The pyrethroid (±)-lambda-cyhalothrin enantioselective biodegradation by a bacterial consortium.

Chiral pesticides have been used in agriculture, including (±)-lambda-cyhalothrin ((±)-LC), which is a pyrethroid insecticide widely employed on crops for protection against different types of insects. However, enantioselectivity is poorly studied in biodegradation processes. Therefore, the (±)-LC enantioselective biodegradation by bacteria from Brazilian savannah was reported in this study with a validated analytical method. All bacterial strains biodegraded (±)-LC with different efficiencies. Residual concentrations of LC (3.7-43.1% of biodegradation) and its enantiomeric excesses (0-27% ee) were determined. Additionally, the formation of the main biodegradation metabolite 3-phenoxybenzoic acid was also quantified. A Bacillus consortium composed of the three most efficient strains biodegraded more LC than any isolated strain solely employed in this work, showing that the use of a consortium is an interesting approach. In addition, 13 metabolites were identified and a biodegradation pathway with biochemical reactions of hydrolysis, reduction, esterification, amidation, elimination and group transfer were proposed, confirming the bioremediation potential of these strains. The LC stereoisomer with the highest insecticidal activity (1R,3R,αS-enantiomer, also known as gamma-cyhalothrin) was preferentially biodegraded by the studied bacteria. Therefore, crops protection with gamma-cyhalothrin, which can be applied in lower concentrations than (±)-LC because it is a more effective product against insects, may also be biodegraded faster than the racemic mixture in the environment, decreasing the toxic effects on non-target organisms.

Recent food applications of microbial surfactants.

Owing to their natural origin and environmental compatibility, interest in microbial surfactants or biosurfactants has gained attention during last few years. These characteristics fulfill the demand of regulatory agencies and society to use more sustained and green chemicals. Microbial-derived surfactants can replace synthetic surfactants in a great variety of industrial applications as detergents, foaming, emulsifiers, solubilizers, and wetting agents. Change in the trend of consumers toward natural from synthetic additives and the increasing health and environmental concerns have created demand for new "green" additives in foods. Apart from their inherent surface-active properties, biosurfactants have shown antimicrobial and anti-biofilm activities against food pathogens; therefore, biosurfactants can be versatile additives or ingredients of food processing. These interesting applications will be discussed in this review.

The combined effect of pH and NaCl on the susceptibility of Listeria monocytogenes to rhamnolipids.

The use of natural and sustainable additives, that are less aggressive to the environment, is a trend in the food industry. Rhamnolipids (RL) biosurfactants have shown potential for controlling food pathogens however, due to the presence of free carboxyl groups, the pH and ionic strength may influence the properties of such surfactants. In this study, we describe the antimicrobial activity of RL under different pH values and NaCl concentrations, towards both planktonic and biofilms of Listeria monocytogenes. RL were effective at pH 5.0 and the addition of 5 % NaCl improved the bactericidal efficacy for planktonic and sessile cells. The effect of NaCl was more pronounced at pH above 6 showing a significant increase in RL antimicrobial activity. At pH 7.0 planktonic population was eradicated by RL only when salt was present whereas biofilm viability was decreased by 5 log with MBIC varying from > 2500.0 mg/L (RL) to 39.0 mg/L (RL + 5 % NaCl). Larger vesicular and lamellar RL self-assembly structures were predominant when NaCl was present, suggesting their association with the antimicrobial activity observed. The pH and ionic strength of the medium are important parameters to be considered for the development of RL-based strategies to control L. monocytogenes.

Side-stream lignins: Potential antioxidant and antimicrobial agents in milk.

In recent years, lignin has drawn increasing attention due to its intrinsic antibacterial and antioxidant activities, biodegradability, and biocompatibility. Yet, like several other biogenic structures, its compositional heterogeneity represents a challenge to overcome. In addition, there are few studies regarding food applications of lignin. Herein, we evaluate the antimicrobial and antioxidant effects of lignin from two different sources. These lignins were characterized by attenuated total reflectance Fourier-transform infrared (ATR-FTIR) and hydrogen nuclear magnetic resonance (1H NMR) spectroscopies. Their antibacterial and antioxidant capacities (DPPH and Folin-Ciocalteu methods) were also investigated. Susceptibility tests were performed with the minimal inhibitory (MIC) and bactericidal (MBC) concentrations using the micro-broth dilution technique. Kraft lignin presented higher radical-scavenging and antibacterial activities than alkali lignin, indicating the dependence of antioxidant and antibacterial activities on the precursor biomass. Scanning electron microscopy shows morphologic changes in the bacteria after exposure to lignin, while confocal microscopy suggests that kraft lignin has affinity towards bacterial surfaces and the ability to cause cell membrane destabilization. Lignin inhibited the growth of Staphylococcus aureus and Salmonella Enteritidis in skimmed milk, herein taken as food model. Our results suggest that lignins are promising candidates for green additives to improve quality and safety within the food chain.

Bacterial-derived surfactants: an update on general aspects and forthcoming applications.

The search for sustainable alternatives to the production of chemicals using renewable substrates and natural processes has been widely encouraged. Microbial surfactants or biosurfactants are surface-active compounds synthesized by fungi, yeasts, and bacteria. Due to their great metabolic versatility, bacteria are the most traditional and well-known microbial surfactant producers, being Bacillus and Pseudomonas species their typical representatives. To be successfully applied in industry, surfactants need to maintain stability under the harsh environmental conditions present in manufacturing processes; thus, the prospection of biosurfactants derived from extremophiles is a promising strategy to the discovery of novel and useful molecules. Bacterial surfactants show interesting properties suitable for a range of applications in the oil industry, food, agriculture, pharmaceuticals, cosmetics, bioremediation, and more recently, nanotechnology. In addition, they can be synthesized using renewable resources as substrates, contributing to the circular economy and sustainability. The article presents a general and updated review of bacterial-derived biosurfactants, focusing on the potential of some groups that are still underexploited, as well as, recent trends and contributions of these versatile biomolecules to circular bioeconomy and nanotechnology.

Hurdle Technology Approach to Control Listeria monocytogenes Using Rhamnolipid Biosurfactant.

This study evaluates the combination of mild heat with a natural surfactant for the inactivation of L. monocytogenes Scott A in low-water-activity (aw) model systems. Glycerol or NaCl was used to reduce the aw to 0.92, and different concentrations of rhamnolipid (RL) biosurfactant were added before heat treatment (60 °C, 5 min). Using glycerol, RL treatment (50-250 µg/mL) reduced bacterial population by less than 0.2 log and heat treatment up to 1.5 log, while the combination of both hurdles reached around 5.0 log reduction. In the NaCl medium, RL treatment displayed higher inactivation than in the glycerol medium at the same aw level and a larger synergistic lethal effect when combined with heat, achieving ≥ 6.0 log reduction at 10-250 µg/mL RL concentrations. The growth inhibition activity of RL was enhanced by the presence of the monovalent salts NaCl and KCl, reducing MIC values from >2500 µg/mL (without salt) to 39 µg/mL (with 7.5% salt). The enhanced antimicrobial activity of RL promoted by the presence of salts was shown to be pH-dependent and more effective under neutral conditions. Overall, results demonstrate that RL can be exploited to design novel strategies based on hurdle approaches aiming to control L. monocytogenes.

Correction: Bertuso et al. Combining Celery Oleoresin, Limonene, and Rhamnolipid as a New Strategy to Control Endospore-Forming Bacillus cereus. Foods 2021, 10, 455.

There was an error in the original publication [...].

Purification and characterization of a surfactin-like molecule produced by Bacillus sp. H2O-1 and its antagonistic effect against sulfate reducing bacteria.

BACKGROUND: Bacillus sp. H2O-1, isolated from the connate water of a Brazilian reservoir, produces an antimicrobial substance (denoted as AMS H2O-1) that is active against sulfate reducing bacteria, which are the major bacterial group responsible for biogenic souring and biocorrosion in petroleum reservoirs. Thus, the use of AMS H2O-1 for sulfate reducing bacteria control in the petroleum industry is a promising alternative to chemical biocides. However, prior to the large-scale production of AMS H2O-1 for industrial applications, its chemical structure must be elucidated. This study also analyzed the changes in the wetting properties of different surfaces conditioned with AMS H2O-1 and demonstrated the effect of AMS H2O-1 on sulfate reducing bacteria cells. RESULTS: A lipopeptide mixture from AMS H2O-1 was partially purified on a silica gel column and identified via mass spectrometry (ESI-MS). It comprises four major components that range in size from 1007 to 1049 Da. The lipid moiety contains linear and branched ß-hydroxy fatty acids that range in length from C13 to C16. The peptide moiety contains seven amino acids identified as Glu-Leu-Leu-Val-Asp-Leu-Leu.Transmission electron microscopy revealed cell membrane alteration of sulfate reducing bacteria after AMS H2O-1 treatment at the minimum inhibitory concentration (5 µg/ml). Cytoplasmic electron dense inclusions were observed in treated cells but not in untreated cells. AMS H2O-1 enhanced the osmosis of sulfate reducing bacteria cells and caused the leakage of the intracellular contents. In addition, contact angle measurements indicated that different surfaces conditioned by AMS H2O-1 were less hydrophobic and more electron-donor than untreated surfaces. CONCLUSION: AMS H2O-1 is a mixture of four surfactin-like homologues, and its biocidal activity and surfactant properties suggest that this compound may be a good candidate for sulfate reducing bacteria control. Thus, it is a potential alternative to the chemical biocides or surface coating agents currently used to prevent SRB growth in petroleum industries.

Susceptibility of Vegetative Cells and Endospores of Bacillus cereus to Rhamnolipid Biosurfactants and Their Potential Application in Dairy.

Bacillus cereus is a Gram-positive, endospore-forming bacterium well-known as a food pathogen that causes great losses in the food industry, especially in dairy. In this study, rhamnolipid (RL) biosurfactants were evaluated as a bio-based alternative for controlling the growth of vegetative cells and endospores of B. cereus. RLs were tested against 14 B. cereus strains isolated from different types of foodstuffs. The antimicrobial activity against vegetative cells and endospores revealed minimal inhibitory concentration (MIC) values of 0.098 mg/mL for almost all strains tested and minimal bactericidal concentration (MBC) varying between 0.098 and >25 mg/mL. The presence of RLs inhibited endospore germination by more than 99%, reducing by 5.5 log the outgrowth of strain 0426. Scanning and transmission electron microscopy confirmed that exposure to RL causes damage to the structure of endospores. When skim milk was utilized as a food model, RL inhibited the growth of vegetative cells and endospores of B. cereus, showing MBC of 3.13 mg/mL for the vegetative cells of strain 0426. The surfactant also reduced bacterial growth in milk at refrigerator temperature. The results suggest that RLs are promising candidates for the development of novel strategies to control B. cereus in the food industry.

Isolation of Brazilian marine fungi capable of growing on DDD pesticide.

The fungi Aspergillus sydowii Ce15, Aspergillus sydowii Ce19, Aspergillus sydowii Gc12, Bionectria sp. Ce5, Penicillium miczynskii Gc5, Penicillium raistrickii Ce16 and Trichoderma sp. Gc1, isolated from marine sponges Geodia corticostylifera and Chelonaplysylla erecta, were evaluated for their ability to grow in the presence of DDD pesticide. Increasing concentrations of DDD pesticide, i.e., 5.0 mg (1.56 × 10⁻¹² mmol), 10.0 mg (3.12 × 10⁻²) mmol) and 15.0 mg (4.68 × 10⁻² mmol) in solid and liquid culture media were tested. The fungi Trichoderma sp. Gc1 and Penicillium miczynskii Gc5 were able to grow in the presence of up to 15.0 mg of DDD, suggesting their potential for biodegradation. A 100% degradation of DDD was attained in liquid culture medium when Trichoderma sp. Gc1 was previously cultivated for 5 days and supplemented with 5.0 mg of DDD in the presence of hydrogen peroxide. However, the quantitative analysis showed that DDD was accumulated on mycelium and biodegradation level reached a maximum value of 58% after 14 days.

Combining Celery Oleoresin, Limonene and Rhamnolipid as New Strategy to Control Endospore-Forming Bacillus cereus.

Foodborne diseases (FBD) are a great problem worldwide, leading millions of people to seek medical help and to significant economic losses for industry. Among the agents implicated in FDB is Bacillus cereus, a Gram-positive, toxigenic and endospore-forming bacterium. In this study, rhamnolipid (RL) biosurfactant, celery oleoresin (OR) and limonene (LN) were evaluated as bio-based alternatives for controlling the growth of vegetative cells and endospores of B. cereus. To address their antimicrobial activity, the compounds were tested separately and in combination. Results demonstrate that, when combined with RL, both OR and LN have lower minimal inhibitory concentration (MIC) values and increased endospore inhibition potential. A percentage of endospore inhibition from 73% to 98%, corresponding to a 2.8-3.6 log reduction in spore outgrowth, was observed. RL inhibited B. cereus growth and endospore germination and potentially enhanced the antimicrobial efficacy of the natural hydrophobic compounds tested.

Biosurfactants as agents to reduce adhesion of pathogenic bacteria to polystyrene surfaces: effect of temperature and hydrophobicity.

Polystyrene surfaces were conditioned with surfactin and rhamnolipid biosurfactants and then assessed regarding the attachment of Staphylococcus aureus, Listeria monocytogenes, and Micrococcus luteus. The effect of different temperatures (35, 25, and 4°C) on the anti-adhesive activity was also studied. Microbial adhesion to solvents and contact angle measurements were performed to characterize bacteria and material surfaces. The results showed that surfactin was able to inhibit bacterial adhesion in all the conditions analyzed, giving a 63-66% adhesion reduction in the bacterial strains at 4°C. Rhamnolipid promoted a slight decrease in the attachment of S. aureus. The anti-adhesive activity of surfactin increased with the decrease in temperature, showing that this is an important parameter to be considered in surface conditioning tests. Surfactin showed good potential as an anti-adhesive compound that can be explored to protect surfaces from microbial contamination.

Combination of Rhamnolipid and Chitosan in Nanoparticles Boosts Their Antimicrobial Efficacy.

Nanomaterials have emerged as antimicrobial agents due to their unique physical and chemical properties. The development of nanoparticles (NPs) composed of natural biopolymers and biosurfactants have sparked interest, as they can be obtained without the use of complex chemical synthesis and toxic materials. In this study, we develop antimicrobial nanoparticles combining the biopolymer chitosan with the biosurfactant rhamnolipid. Addition of rhamnolipid reduced the size and polydispersity index of chitosan nanoparticles showing a more positive surface charge with improved stability, suggesting that chitosan-free amino groups are predominantly present on the surface of nanoparticles. Antimicrobial activity of chitosan/rhamnolipid nanoparticles (C/RL-NPs) against Staphylococcus strains surpassed that of either single rhamnolipid or chitosan, both in planktonic bacteria and biofilms. Minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of C/RL-NPs were determined considering the concentration of each individual molecule in NPs. MIC values of 14/19 µg mL-1 and MBC of 29/37 µg mL-1 were observed for S. aureus DSM 1104 and MIC and MBC of 29/37 and 58/75 µg mL-1 were observed against S. aureus ATCC 29213, respectively. For S. epidermidis, MIC and MBC of 7/9 and 14/19 µg mL-1 were noticed. Chitosan and chitosan nanoparticles eliminate the bacteria present in the upper parts of biofilms, while C/RL-NPs were more effective, eradicating most sessile bacteria and reducing the number of viable cells below the detection limit, when NPs concentration of 58/75 µg mL-1 was applied for both S. aureus DSM 1104 and S. epidermidis biofilms. The improved antibacterial efficacy of C/RL-NPs was linked to the increased local delivery of chitosan and rhamnolipid at the cell surface and, consequently, to their targets in Gram-positive bacteria. The combination of chitosan and rhamnolipid offers a promising strategy to the design of novel nanoparticles with low cytotoxicity, which can be exploited in pharmaceutical and food industries.

Cassava wastewater as a substrate for the simultaneous production of rhamnolipids and polyhydroxyalkanoates by Pseudomonas aeruginosa.

Glycerol, cassava wastewater (CW), waste cooking oil and CW with waste frying oils were evaluated as alternative low-cost carbon substrates for the production of rhamnolipids and polyhydroxyalkanoates (PHAs) by various Pseudomonas aeruginosa strains. The polymers and surfactants produced were characterized by gas chromatography-mass spectrophotometry (MS) and by high-performance liquid chromatography-MS, and their composition was found to vary with the carbon source and the strain used in the fermentation. The best overall production of rhamnolipids and PHAs was obtained with CW with frying oil as the carbon source, with PHA production corresponding to 39% of the cell dry weight and rhamnolipid production being 660 mg l(-1). Under these conditions, the surface tension of the culture decreased to 30 mN m(-1), and the critical micelle concentration was 26.5 mg l(-1). It would appear that CW with frying oil has the highest potential as an alternative substrate, and its use may contribute to a reduction in the overall environmental impact generated by discarding such residues.

Hydrogenation of Halogenated 2'-Hydroxychalcones by Mycelia of Marine-Derived Fungus Penicillium raistrickii.

This study describes the chemoselective hydrogenation reaction of halogenated 2'-hydroxychalcones by the marine-derived fungus Penicillium raistrickii CBMAI 931. Initially, 2'-hydroxychalcone was utilized as a model for the selection of the appropriate conditions to perform the biotransformation reactions. The best results were obtained using mycelia and filtered culture broth, and this condition was chosen for the biotransformation reaction of 2'-hydroxychalcones substituted with methoxy and halogen groups. Experiments performed with 2'-hydroxychalcones dissolved in 600 µL-DMSO were more effective than those performed using 300 µL-DMSO, once solubility of the compounds influenced conversion rate in the liquid medium. The halogenated 2'-hydroxy-dihydrochalcones were obtained in good conversions (78-99%) and moderate isolated yields (31-65%). All biotransformation reactions using the marine-derived fungus P. raistrickii CBMAI 931 showed regioselective and chemoselective control for the formation of 2'-hydroxy-dihydrochalcones.

The antibacterial activity of rhamnolipid biosurfactant is pH dependent.

Rhamnolipid (RL) biosurfactants have been studied as agents to control the growth of food pathogens however, to be successful applied as antimicrobial agent in food, is important to determine the effect of environmental conditions on RL activity. Once pH is a determinant factor to the development of microorganisms in food, we investigated the antimicrobial activity of RL under different pH values. The antimicrobial activity of RL against the Gram-positive pathogens L. monocytogenes, B. cereus and S. aureus was pH dependent and favored at more acidic conditions while the Gram-negative Salmonella enterica and E. coli (EHEC) showed resistance at all pH levels studied. Bacillus cereus was the most sensitive bacteria showing MIC of 19.5 µg/mL and eradication of the population was observed after 30 min with 39.1 µg/mL of RL. The sensitivity to RL was associated with reduction on cell surface hydrophobicity and cytoplasmic membrane damage. Scanning Electron Microscopy images evidenced the cell damage promoted by RL on sensitive strains. The pH is an important factor to be considered on developing RL-based strategies to the control of food pathogens.

Production and properties of a surfactant obtained from Bacillus subtilis grown on cassava wastewater.

The production and properties of a biosurfactant, synthesized by Bacillus subtilis LB5a strain, using cassava wastewater as substrate were investigated. The microorganism was able to grow and to produce surfactant on cassava waste, reducing the surface tension of medium to 26.6 mN/m and giving a crude surfactant concentration of 3.0 g/L after 48 h. The surface-active compound retained its properties during exposure to elevate temperatures (100 degrees C), high salinity (20% NaCl) and a wide range of pH values. The surfactant was capable of forming stable emulsions with various hydrocarbons. Preliminary chemical characterization revealed that the surfactant has a lipopeptide composition with a CMC value of about 33 mg/L. Cassava wastewater proved to be a suitable substrate for biosurfactant biosynthesis, providing not only bacterial growth and product accumulation but also a surfactant that has interesting and useful properties with potential for many industrial applications.

Rhamnolipid surfactants: an update on the general aspects of these remarkable biomolecules.

Pseudomonas strains are able to biosynthesize rhamnose-containing surfactants also known as rhamnolipids. These surface-active compounds are reviewed with respect to chemical structure, properties, biosynthesis, and physiological role, focusing on their production and the use of low-cost substrates such as wastes from food industries as alternative carbon sources. The use of inexpensive raw materials such as agroindustrial wastes is an attractive strategy to reduce the production costs associated with biosurfactant production and, at same time, contribute to the reduction of environmental impact generated by the discard of residues, and the treatment costs. Carbohydrate-rich substrates generated low rhamnolipid levels, whereas oils and lipid-rich wastes have shown excellent potential as alternative carbon sources.

Oil wastes as unconventional substrates for rhamnolipid biosurfactant production by Pseudomonas aeruginosa LBI.

Oil wastes were evaluated as alternative low-cost substrates for the production of rhamnolipids by Pseudomonas aeruginosa LBI strain. Wastes obtained from soybean, cottonseed, babassu, palm, and corn oil refinery were tested. The soybean soapstock waste was the best substrate, generating 11.7 g/L of rhamnolipids with a surface tension of 26.9 mN/m, a critical micelle concentration of 51.5 mg/L, and a production yield of 75%. The monorhamnolipid RhaC(10)C(10) predominates when P. aeruginosa LBI was cultivated on hydrophobic substrates, whereas hydrophilic carbon sources form the dirhamnolipid Rha(2)C(10)C(10) predominantly.