Shape-anchored porous polymer monoliths for integrated online solid-phase extraction-microchip electrophoresis-electrospray ionization mass spectrometry.

We report a simple protocol for fabrication of shape-anchored porous polymer monoliths (PPMs) for on-chip SPE prior to online microchip electrophoresis (ME) separation and on-chip (ESI/MS). The chip design comprises a standard ME separation channel with simple cross injector and a fully integrated ESI emitter featuring coaxial sheath liquid channel. The monolith zone was prepared in situ at the injection cross by laser-initiated photopolymerization through the microchip cover layer. The use of high-power laser allowed not only maskless patterning of a precisely defined monolith zone, but also faster exposure time (here, 7 min) compared with flood exposure UV lamps. The size of the monolith pattern was defined by the diameter of the laser output (∅500 µm) and the porosity was geared toward high through-flow to allow electrokinetic actuation and thus avoid coupling to external pumps. Placing the monolith at the injection cross enabled firm anchoring based on its cross-shape so that no surface premodification with anchoring linkers was needed. In addition, sample loading and subsequent injection (elution) to the separation channel could be performed similar to standard ME setup. As a result, 15- to 23-fold enrichment factors were obtained already at loading (preconcentration) times as short as 25 s without sacrificing the throughput of ME analysis. The performance of the SPE-ME-ESI/MS chip was repeatable within 3.1% and 11.5% RSD (n = 3) in terms of migration time and peak height, respectively, and linear correlation was observed between the loading time and peak area.

Feasibility of SU-8-based capillary electrophoresis-electrospray ionization mass spectrometry microfluidic chips for the analysis of human cell lysates.

Monolithically integrated, polymer (SU-8) microchips comprising an electrophoretic separation unit, a sheath flow interface and an ESI emitter were developed to improve the speed and throughput of proteomics analyses. Validation of the microchip method was performed based on peptide mass fingerprinting and single peptide sequencing of selected protein standards. Rapid, yet reliable identification of four biologically important proteins (cytochrome C, ß-lactoglobulin, ovalbumin and BSA) confirmed the applicability of the SU-8 microchips to ambitious proteomic applications and allowed their use in the analysis of human muscle cell lysates. The characteristic tryptic peptides were easily separated with plate numbers approaching 10(6), and with peak widths at half height as low as 0.6 s. The on-chip sheath flow interface was also exploited to the introduction of an internal mass calibrant along with the sheath liquid which enabled accurate mass measurements by high-resolution Q-TOF MS. Additionally, peptide structural characterization and protein identification based on MS/MS fragmentation data of a single tryptic peptide was obtained using an ion trap instrument. Protein sequence coverages exceeding 50% were routinely obtained without any pretreatment of the proteolytic samples and a typical total analysis time from sampling to detection was well below ten minutes. In conclusion, monolithically integrated, dead-volume-free, SU-8 microchips proved to be a promising platform for fast and reliable analysis of complex proteomic samples. Good analytical performance of the microchips was shown by performing both peptide mass fingerprinting of complex cell lysates and protein identification based on single peptide sequencing.

Rapid separation of phosphopeptides by microchip electrophoresis-electrospray ionization mass spectrometry.

Protein phosphorylation is a significant biological process, but separation of phosphorylated peptide isomers is often challenging for many analytical techniques. We developed a microchip electrophoresis (MCE) method for rapid separation of phosphopeptides with on-chip electrospray ionization (ESI) facilitating online sample introduction to the mass spectrometer (MS). With the method, two monophosphorylated positional isomers of insulin receptor peptide (IR1A and IR1B) and a triply phosphorylated insulin receptor peptide (IR3), all with the same amino acid sequence, were separated from the nonphosphorylated peptide (IR0) in less than one minute. For efficient separation of the positional peptide isomers from each other derivatization with 9-fluorenylmethyl reagents (either chloroformate, Fmoc-Cl, or N-succinimidyl carbonate, Fmoc-OSu) was required before the analysis. The derivatization improved not only the separation of the monophosphorylated positional peptide isomers in MCE, but also identification of the phosphorylation site based on MS/MS.

Interfacing microchip isoelectric focusing with on-chip electrospray ionization mass spectrometry.

In this work, we demonstrate the interfacing of microchip capillary isoelectric focusing (cIEF) with online mass spectrometric (MS) detection via a fully integrated, on-chip sheath flow electrospray ionization (ESI) emitter. Thanks to the pH-dependent surface charge of the SU-8 polymer cIEF can be successfully run in native SU-8 microchannels without need for surface pretreatment prior to analysis. On the other hand, the inherent electroosmotic flow (EOF) taking place in SU-8 microchannels at high pH can be exploited to electrokinetic mobilization of the focused pH gradient toward the MS and no external pumps are required. In addition to direct coupling of a cIEF separation channel to an ESI emitter, we developed a two-dimensional separation chip for two-step, multiplex cIEF-transient-isotachophoretic (tITP) separation. In this case, cIEF is performed in the first dimension (effective L=20mm) and tITP in the second dimension (L=35mm) followed by ESI/MS. As a result, the migration order is affected by both the pI values (cIEF) and the intrinsic electrophoretic mobilities (tITP) of the sample components. The selectivity of the separation system was shown to be different from pure cIEF or pure ITP, which allows at best for baseline separation of two compounds with nearly identical pI values. The repeatabilities of the migration times of the two-step cIEF-tITP separation were 3.1-6.8% RSD (n=3). Thanks to the short separation channel, relatively short focusing times of 60-270s (depending on the applied focusing potential) were sufficient for establishment of the pH gradient and cIEF separation of the sample components, yielding total analysis times (including loading, focusing, and mobilization) well below 10min.

Rapid and sensitive drug metabolism studies by SU-8 microchip capillary electrophoresis-electrospray ionization mass spectrometry.

Monolithically integrated, polymer (SU-8) microchips comprising an electrophoretic separation unit, a sheath flow interface, and an electrospray ionization (ESI) emitter were developed to improve the speed and throughput of metabolism research. Validation of the microchip method was performed using bufuralol 1-hydroxylation via CYP450 enzymes as the model reaction. The metabolite, 1-hydroxybufuralol, was easily separated from the substrate (R(s)=0.5) with very good detection sensitivity (LOD=9.3nM), linearity (range: 50-500nM, r(2)=0.9997), and repeatability (RSD(Area)=10.3%, RSD(Migrationtime)=2.5% at 80nM concentration without internal standard). The kinetic parameters of bufuralol 1-hydroxylation determined by the microchip capillary electrophoresis (CE)-ESI/mass spectrometry (MS) method, were comparable to the values presented in literature as well as to the values determined by in-house liquid chromatography (LC)-UV. In addition to enzyme kinetics, metabolic profiling was demonstrated using authentic urine samples from healthy volunteers after intake of either tramadol or paracetamol. As a result, six metabolites of tramadol and four metabolites of paracetamol, including both phase I oxidation products and phase II conjugation products, were detected and separated from each other within 30-35s. Before analysis, the urine samples were pre-treated with on-chip, on-line liquid-phase microextraction (LPME) and the results were compared to those obtained from urine samples pre-treated with conventional C18 solid-phase extraction (SPE, off-chip cartridges). On the basis of our results, the SU-8 CE-ESI/MS microchips incorporating on-chip sample pre-treatment, injection, separation, and ESI/MS detection were proven as efficient and versatile tools for drug metabolism research.