RESUMO
Vitamin B12 (VB12) has been reported to degrade PFOS in the presence of TiIII citrate at 70 °C. Porphyrin-based catalysts have emerged as VB12 analogues and have been successfully used in various fields of research due to their interesting structural and electronic properties. However, there is inadequate information on the use of these porphyrin-based metal complexes in the defluorination of PFOS. We have therefore explored a series of porphyrin-based metal complexes for the degradation of PFOS. CoII-5,10,15,20-tetraphenyl-21H,23H-porphyrin (CoII-TPP), CoII-5,10,15,20-tetrakis(4-methoxyphenyl)-21H,23H-porphyrin (CoII-M-TPP), and CoIII-M-TPP exhibited efficient reductive defluorination of the branched PFOS. Within 5-8 h, these compounds achieved the same level of PFOS defluorination as VB12 achieved in 7-10 days. For branched isomers, the specific removal rate of the CoII-TPP-TiIII citrate system is 64-105 times higher than that for VB12-TiIII citrate. Moreover, the CoII-TPP-TiIII citrate system displayed efficient (51%) defluorination for the branched PFOS (br-PFOS) in 1 day even at room temperature (25 °C). The effects of the iron and cobalt metal centers, reaction pH, and several reductants (NaBH4, nanosized zerovalent zinc (nZn0), and TiIII citrate) were systematically investigated. Based on the analysis of the products and previously published reports, a new possible defluorination pathway of branched PFOS is also proposed.
Assuntos
Complexos de Coordenação , Porfirinas , Catálise , Ácido Cítrico/química , Isomerismo , Porfirinas/químicaRESUMO
Metal oxides that form near sediment-water interfaces in marine and riverine settings are known to act as a sediment trap for pollutants of environmental concern (e.g., arsenic and mercury). The occurrence of these pollutant traps near sediment-water interfaces in nearshore lake environments is unclear yet important to understand because they may accumulate pollutants that may be later released as environmental conditions change. This study evaluates the prevalence of pollutant sediment traps in nearshore aquifers adjacent to large lakes and the factors that affect the accumulation and release of pollutants, specifically arsenic. Field data from six sites along the Laurentian Great Lakes indicate widespread enrichment of arsenic in nearshore aquifers with arsenic sequestered to iron oxide phases. Arsenic enrichment at all sites (solid-phase arsenic >2 µg/g) suggests that this is a naturally occurring phenomenon. Arsenic was more mobile in reducing aquifers with elevated dissolved arsenic (up to 60 µg/L) observed, where reducing groundwater mixes with infiltrating oxic lake water. Dissolved arsenic was low (<3 µg/L) in all oxic nearshore aquifers studied despite high solid-phase arsenic concentrations. The findings have broad implications for understanding the widespread accumulation of reactive pollutants in nearshore aquifers and factors that affect their release to large lakes.
Assuntos
Arsênio , Água Subterrânea , Poluentes Químicos da Água , Arsênio/análise , Monitoramento Ambiental , Sedimentos Geológicos , Lagos , Poluentes Químicos da Água/análiseRESUMO
2021 marks 10 years since controlled abiotic synthesis of sulfidated nanoscale zerovalent iron (S-nZVI) for use in site remediation and water treatment emerged as an area of active research. It was then expanded to sulfidated microscale ZVI (S-mZVI) and together with S-nZVI, they are collectively referred to as S-(n)ZVI. Heightened interest in S-(n)ZVI stemmed from its significantly higher reactivity to chlorinated solvents and heavy metals. The extremely promising research outcomes during the initial period (2011-2017) led to renewed interest in (n)ZVI-based technologies for water treatment, with an explosion in new research in the last four years (2018-2021) that is building an understanding of the novel and complex role of iron sulfides in enhancing reactivity of (n)ZVI. Numerous studies have focused on exploring different S-(n)ZVI synthesis approaches, and its colloidal, surface, and reactivity (electrochemistry, contaminant selectivity, and corrosion) properties. This review provides a critical overview of the recent milestones in S-(n)ZVI technology development: (i) clear insights into the role of iron sulfides in contaminant transformation and long-term aging, (ii) impact of sulfidation methods and particle characteristics on reactivity, (iii) broader range of treatable contaminants, (iv) synthesis for complete decontamination, (v) ecotoxicity, and (vi) field implementation. In addition, this review discusses major knowledge gaps and future avenues for research opportunities.
Assuntos
Recuperação e Remediação Ambiental , Poluentes Químicos da Água , Purificação da Água , Corrosão , FerroRESUMO
Groundwater-coastal water interactions influence the fate of inorganic chemicals in nearshore aquifers and their flux to receiving coastal waters. This study evaluates the impact of variable wave conditions on the geochemical changes and distribution of mobile arsenic (As) in a nearshore aquifer. Field measurements in a sandy nearshore aquifer on Lake Erie, Canada, are presented with geochemical changes analyzed over a period of high waves. A numerical model of wave-induced groundwater flow dynamics, validated against field data, is used to provide insight into the physical flow processes underlying the observed geochemical changes. Rapid changes in dissolved As, Fe, Mn, and S demonstrate the importance of reactions as well as dynamic transport in controlling the behavior of reactive species, especially those that are redox sensitive. Field data suggest the presence of sediment traps, which under certain hydrological and geochemical conditions may result in a "hot moment" with episodic release of As. The study provides new insight into factors controlling the fate of reactive species in dynamic coastal environments as required to better predict chemical fluxes to coastal waters. Additionally, it highlights the need to pay particular attention to "hot moments" for reaction and transport caused by storms and waves.
Assuntos
Arsênio , Água Subterrânea , Poluentes Químicos da Água , Canadá , Monitoramento AmbientalRESUMO
Elevated fecal indicator bacteria (FIB) in beach sand and pore water represent an important nonpoint source of contamination to surface waters. This study examines the physical processes governing the accumulation and distribution of FIB in a beach aquifer. Field data indicate E. coli and enterococci can be transported 1 and 2 m, respectively, below the water table. Data were used to calibrate a numerical model whereby FIB are delivered to a beach aquifer by wave-induced infiltration across the beach face. Simulations indicate FIB rapidly accumulate in a beach aquifer with FIB primarily associated with sand rather than freely residing in the pore water. Simulated transport of E. coli in a beach aquifer is complex and does not correlate with conservative tracer transport. Beaches with higher wave-induced infiltration rate and vertical infiltration velocity (i.e., beaches with higher beach slope and wave height, and lower terrestrial groundwater discharge) had greater E. coli accumulation and E. coli was transported deeper below the beach face. For certain beach conditions, the amount of FIB accumulated in sand over 5-6 days was found to be sufficient to trigger a beach advisory if eroded to surface water.
Assuntos
Praias , Água , Bactérias , Enterococcus , Escherichia coli , Fezes/microbiologia , Água Doce/microbiologia , Microbiologia da ÁguaRESUMO
This study proposes and proves (in concept) a novel approach of combining electrokinetic (EK)-assisted delivery of an oxidant, persulfate (PS), and low temperature electrical resistivity heating (ERH), to activate PS, to achieve remediation of contaminated, low permeability soil. This unique combination is able to overcome existing challenges in remediating low permeability materials, particularly associated with delivering remediants. A further benefit of the approach is the use of the same electrodes for both EK and ERH phases. Experiments were conducted in a laboratory-scale sand tank packed with silt and aqueous tetrachloroethene (PCE) and bracketed on each side by an electrode. EK first delivered unactivated PS throughout the silt. ERH then generated and sustained the target temperature to activate the PS. As a result, PCE concentrations decreased to below detection limit in the silt in a few weeks. Moreover, it was found that activating PS at â¼36 °C eliminated more PCE than activating it at >41 °C. It is expected this results from the reactive SO4â¢- radical being generated more slowly, which ensures more complete reaction with the contaminant. The novel application of EK-assisted PS delivery followed by low temperature ERH appears to be a viable strategy for low permeability contaminated soil remediation.
Assuntos
Impedância Elétrica , Recuperação e Remediação Ambiental , Calefação , Oxidantes , Oxirredução , Permeabilidade , Poluentes do SoloRESUMO
Iron-based materials used in water treatment and groundwater remediation-especially micro- and nanosized zerovalent iron (nZVI)-can be more effective when modified with lower-valent forms of sulfur (i.e., "sulfidated"). Controlled sulfidation for this purpose (using sulfide, dithionite, etc.) is the main topic of this review, but insights are derived by comparison with related and comparatively well-characterized processes such as corrosion of iron in sulfidic waters and abiotic natural attenuation by iron sulfide minerals. Material characterization shows that varying sulfidation protocols (e.g., concerted or sequential) and key operational variables (e.g., S/Fe ratio and sulfidation duration) result in materials with structures and morphologies ranging from core-shell to multiphase. A meta-analysis of available kinetic data for dechlorination under anoxic conditions, shows that sulfidation usually increases dechlorination rates, and simultaneously hydrogen production is suppressed. Therefore, sulfidation can greatly improve the efficiency of utilization of reducing equivalents for contaminant removal. This benefit is most likely due to inhibited corrosion as a result of sulfidation. Sulfidation may also favor desirable pathways of contaminant removal, such as (i) dechlorination by reductive elimination rather than hydrogenolysis and (ii) sequestration of metals as sulfides that could be resistant to reoxidation. Under oxic conditions, sulfidation is shown to enhance heterogeneous catalytic oxidation of contaminants. These net effects of sulfidation on contaminant removal by iron-based materials may substantially improve their practical utility for water treatment and remediation of contaminated groundwater.
Assuntos
Ferro , Purificação da Água , Água Subterrânea , Halogenação , Sulfetos , Poluentes Químicos da ÁguaRESUMO
This study evaluates the pore-scale distribution of silver nanoparticles during transport through a sandy porous medium via quantitative synchrotron X-ray computed microtomography (qSXCMT). The associated distributions of nanoparticle flow velocities and mass flow rates were obtained by coupling these images with computational fluid dynamic (CFD) simulations. This allowed, for the first time, the comparison of nanoparticle mass flow with that assumed by the standard colloid filtration theory (CFT) modeling approach. It was found that (i) 25% of the pore space was further from the grain than assumed by the CFT model; (ii) the average pore velocity agreed well between results of the coupled qSXCMT/CFD approach and the CFT model within the model fluid envelope, although the former were 2 times larger than the latter in the centers of the larger pores and individual velocities were upwards of 20 times those in the CFT model at identical distances from grain surfaces ; and (iii) approximately 30% of all nanoparticle mass and 38% of all nanoparticle mass flow occurred further away from the grain surface than expected by the CFT model. This work suggests that a significantly smaller fraction of nanoparticles than expected will contact a grain surface by diffusion via CFT models, likely contributing to inadequate CFT model nanoparticle transport predictions.
RESUMO
1,2-Dichloroethane (1,2-DCA) is a chlorinated solvent classified as a probable human carcinogen. Due to its extensive use in industrial applications, widespread contamination, and recalcitrance toward abiotic dechlorination, 1,2-DCA remains a challenging compound for the remediation community. Over the past decade, nano zerovalent iron (nZVI) has been efficiently used to treat many of the chlorinated compounds of concern. However, thus far, even nZVI (monometallic or bimetallic) has been unable to dechlorinate 1,2-DCA. Therefore, an alternative treatment coupling nZVI with dithionite to treat 1,2-DCA is proposed in this work. Coupled nZVI-dithionite was able to degrade >90% 1,2-DCA over the course of a year. The effects of dithionite and nZVI loadings, carboxymethyl cellulose (CMC) coating, addition of palladium, and other iron species as metal surfaces on the degradation kinetics were also investigated. Observed pseudo-first-order rate constants (kobs) ranged from 3.8 × 10(-3) to 7.8 × 10(-3) d(-1). Both nucleophilic substitution and reductive dechlorination are the proposed mechanisms for 1,2-DCA degradation by coupled nZVI-dithionite treatment. Characterization analysis of the nZVI-dithionite nanoparticles shows that most of the iron was still preserved in the zerovalent state even after more than one year of reactivity with some iron sulfide (FeS) formation. Scanning electron microscopy (SEM) analysis shows that the nanosized spherical particles were still present along with the FeS platelets. This novel treatment represents the first nZVI-based formulation to achieve nearly complete degradation of 1,2-DCA.
Assuntos
Ditionita , Ferro , Halogenação , Paládio , SulfetosRESUMO
Foreshore beach sands and pore water may act as a reservoir and nonpoint source of fecal indicator bacteria (FIB) to surface waters. This paper presents data collected at a fine sand beach on Lake Huron, Canada over three field events. The data show that foreshore sand erosion as wave height increases results in elevated Escherichia coli concentrations in surface water, as well as depletion of E. coli from the foreshore sand and pore water. E. coli initially attached to foreshore sand rather than initially residing in the pore water was found to be the main contributor to elevated surface water concentrations. Surface water E. coli concentrations were a function of not only wave height (and associated sand erosion) but also the time elapsed since a preceding period of high wave intensity. This finding is important for statistical regression models used to predict beach advisories. While calculations suggest that foreshore sand erosion may be the dominant mechanism for releasing E. coli to surface water during intensified wave conditions at a fine sand beach, comparative characterization of the E. coli distribution at a coarse sand-cobble beach suggests that interstitial pore water flow and discharge may be more important for coarser sand beaches.
Assuntos
Praias , Escherichia coli , Água Doce/microbiologia , Dióxido de Silício , Água , Microbiologia da ÁguaRESUMO
Nanoscale zerovalent iron (nZVI) is an emerging technology for the remediation of contaminated sites. However, there are concerns related to the impact of nZVI on in situ microbial communities. In this study, the microbial community composition at a contaminated site was monitored over two years following the injection of nZVI stabilized with carboxymethyl cellulose (nZVI-CMC). Enhanced dechlorination of chlorinated ethenes to nontoxic ethene was observed long after the expected nZVI oxidation. The abundance of Dehalococcoides (Dhc) and vinyl chloride reductase (vcrA) genes, monitored using qPCR, increased by over an order of magnitude in nZVI-CMC-impacted wells. The entire microbial community was tracked using 16S rRNA gene amplicon pyrosequencing. Following nZVI-CMC injection, a clear shift in microbial community was observed, with most notable increases in the dechlorinating genera Dehalococcoides and Dehalogenimonas. This study suggests that coupled abiotic degradation (i.e., from reaction with nZVI) and biotic degradation fueled by CMC led to the long-term degradation of chlorinated ethenes at this field site. Furthermore, nZVI-CMC addition stimulated dehalogenator growth (e.g., Dehalococcoides) and biotic degradation of chlorinated ethenes.
Assuntos
Carboximetilcelulose Sódica , Ferro , Chloroflexi , Halogenação , RNA Ribossômico 16SRESUMO
A pilot scale injection of nanoscale zerovalent iron (nZVI) stabilized with carboxymethyl cellulose (CMC) was performed at an active field site contaminated with a range of chlorinated volatile organic compounds (cVOC). The cVOC concentrations and microbial populations were monitored at the site before and after nZVI injection. The remedial injection successfully reduced parent compound concentrations on site. A period of abiotic degradation was followed by a period of enhanced biotic degradation. Results suggest that the nZVI/CMC injection created conditions that stimulated the native populations of organohalide-respiring microorganisms. The abundance of Dehalococcoides spp. immediately following the nZVI/CMC injection increased by 1 order of magnitude throughout the nZVI/CMC affected area relative to preinjection abundance. Distinctly higher cVOC degradation occurred as a result of the nZVI/CMC injection over a 3 week evaluation period when compared to control wells. This suggests that both abiotic and biotic degradation occurred following injection.
Assuntos
Carboximetilcelulose Sódica/química , Poluição Ambiental , Recuperação e Remediação Ambiental/métodos , Ferro/química , Compostos Orgânicos Voláteis , Biodegradação Ambiental , Chloroflexi/genética , Chloroflexi/isolamento & purificação , Halogenação , Ontário , Compostos Orgânicos Voláteis/análise , Compostos Orgânicos Voláteis/química , Compostos Orgânicos Voláteis/metabolismoRESUMO
Attempts at understanding nanoparticle fate and transport in the subsurface environment are currently hindered by an inability to quantify nanoparticle behavior at the pore scale (within and between pores) within realistic pore networks. This paper is the first to present a method for high resolution quantification of silver nanoparticle (nAg) concentrations within porous media under controlled experimental conditions. This method makes it possible to extract silver nanoparticle concentrations within individual pores in static and quasi-dynamic (i.e., transport) systems. Quantification is achieved by employing absorption-edge synchrotron X-ray computed microtomography (SXCMT) and an extension of the Beer-Lambert law. Three-dimensional maps of X-ray mass linear attenuation are converted to SXCMT-determined nAg concentration and are found to closely match the concentrations determined by ICP analysis. In addition, factors affecting the quality of the SXCMT-determined results are investigated: 1) The acquisition of an additional above-edge data set reduced the standard deviation of SXCMT-determined concentrations; 2) X-ray refraction at the grain/water interface artificially depresses the SXCMT-determined concentrations within 18.1 µm of a grain surface; 3) By treating the approximately 20 × 10(6) voxels within each data set statistically (i.e., averaging), a high level of confidence in the SXCMT-determined mean concentrations can be obtained. This novel method provides the means to examine a wide range of properties related to nanoparticle transport in controlled laboratory porous medium experiments.
Assuntos
Nanopartículas Metálicas/química , Prata/química , Síncrotrons , Microtomografia por Raio-X/métodos , Porosidade , Incerteza , ÁguaRESUMO
Nanoscale zerovalent iron (nZVI) particles were injected into a contaminated sandy subsurface area in Sarnia, Ontario. The nZVI was synthesized on site, creating a slurry of 1 g/L nanoparticles using the chemical precipitation method with sodium borohydride (NaBH4) as the reductant in the presence of 0.8% wt. sodium carboxymethylcellulose (CMC) polymer to form a stable suspension. Individual nZVI particles formed during synthesis had a transmission electron microscopy (TEM) quantified particle size of 86.0 nm and dynamic light scattering (DLS) quantified hydrodynamic diameter for the CMC and nZVI of 624.8 nm. The nZVI was delivered to the subsurface via gravity injection. Peak normalized total Fe breakthrough of 71% was observed 1m from the injection well and remained above 50% for the 24 h injection period. Samples collected from a monitoring well 1 m from the injection contained nanoparticles with TEM-measured particle diameter of 80.2 nm and hydrodynamic diameter of 562.9 nm. No morphological changes were discernible between the injected nanoparticles and nanoparticles recovered from the monitoring well. Energy dispersive X-ray spectroscopy (EDS) was used to confirm the elemental composition of the iron nanoparticles sampled from the downstream monitoring well, verifying the successful transport of nZVI particles. This study suggests that CMC stabilized nZVI can be transported at least 1 m to the contaminated source zone at significant Fe(0) concentrations for reaction with target contaminants.
Assuntos
Ferro/química , Nanopartículas Metálicas/química , Carboximetilcelulose Sódica/química , Poluentes do Solo/química , Estudos de Tempo e Movimento , Purificação da Água/métodosRESUMO
Sulfidated nanoscale zerovalent iron (S-nZVI) has demonstrated promising reactivity and longevity for remediating chlorinated volatile compounds (cVOC) contaminants in laboratory tests. However, its effectiveness in field applications remains inadequately evaluated. This study provides the first quantitative evaluation of the long-term effectiveness of carboxymethyl cellulose-stabilized S-nZVI (CMC-S-nZVI) at a cVOC-contaminated field site. A reactive transport model-based numerical approach delineates the change in cVOC concentrations and carbon isotope values (i.e., δ13C from compound-specific stable isotope analysis (CSIA)) caused by dissolution of dense non-aqueous phase liquid, sorption, and pathway-specific degradation and production, respectively. This delineation reveals quantitative insights into remediation effectiveness typically difficult to obtain, including extent of degradation, contributions of different degradation pathways, and degradation rate coefficients. Significantly, even a year after CMC-S-nZVI application, degradation remains an important process effectively removing various cVOC contaminants (i.e., chlorinated ethenes, 1,2-dichloroethanes, and chlorinated methanes) at an extent varying from 5 %-62 %. Although the impacts of CMC-S-nZVI abundance on degradation vary for different cVOC and for different sampling locations at the site, for the primary site contaminants of tetrachloroethene and trichloroethene, their predominance of dichloroelimination pathway (≥ 88 %), high degradation rate coefficient (0.4-1.7 d-1), and occurrence at locations with relatively high CMC-S-nZVI abundance strongly indicate the effectiveness of abiotic remediation. These quantitative assessments support that CMC-S-nZVI supports sustainable ZVI-based remediation. Further, the novel numerical approach presented in this study provides a powerful tool for quantitative cVOC remediation assessments at complex field sites where multiple processes co-occur to control both concentration and CSIA data.
Assuntos
Recuperação e Remediação Ambiental , Ferro , Ferro/química , Recuperação e Remediação Ambiental/métodos , Compostos Orgânicos Voláteis/química , Hidrocarbonetos Clorados/química , Poluentes Químicos da Água/química , Isótopos de Carbono , Modelos TeóricosRESUMO
Nano zero-valent metals (nZVMs) have been extensively utilized for decades in the reductive remediation of groundwater contaminated with chlorinated organic compounds, owing to their robust reducing capabilities, simple application, and cost-effectiveness. Nevertheless, there remains a dearth of information regarding the efficient reductive defluorination of linear or branched per- and polyfluoroalkyl substances (PFASs) using nZVMs as reductants, largely due to the absence of appropriate catalysts. In this work, various soluble porphyrin ligands [[mesotetra(4-carboxyphenyl)porphyrinato]cobalt(III)]Cl·7H2O (CoTCPP), [[mesotetra(4-sulfonatophenyl) porphyrinato]cobalt(III)]·9H2O (CoTPPS), and [[mesotetra(4-N-methylpyridyl) porphyrinato]cobalt(II)](I)4·4H2O (CoTMpyP) have been explored for defluorination of PFASs in the presence of the nZn0 as reductant. Among these, the cationic CoTMpyP showed best defluorination efficiencies for br-perfluorooctane sulfonate (PFOS) (94%), br-perfluorooctanoic acid (PFOA) (89%), and 3,7-Perfluorodecanoic acid (PFDA) (60%) after 1 day at 70 °C. The defluorination rate constant of this system (CoTMpyP-nZn0) is 88-164 times higher than the VB12-nZn0 system for the investigated br-PFASs. The CoTMpyP-nZn0 also performed effectively at room temperature (55% for br-PFOS, 55% for br-PFOA and 25% for 3,7-PFDA after 1day), demonstrating the great potential of in-situ application. The effect of various solubilizing substituents, electron transfer flow and corresponding PFASs defluorination pathways in the CoTMpyP-nZn0 system were investigated by both experiments and density functional theory (DFT) calculations. SYNOPSIS: Due to the unavailability of active catalysts, available information on reductive remediation of PFAS by zero-valent metals (ZVMs) is still inadequate. This study explores the effective defluorination of various branched PFASs using soluble porphyrin-ZVM systems and offers a systematic approach for designing the next generation of catalysts for PFAS remediation.
Assuntos
Zinco , Zinco/química , Porfirinas/química , Fluorocarbonos/química , Metaloporfirinas/química , Poluentes Químicos da Água/química , OxirreduçãoRESUMO
Nanoscale zerovalent iron (nZVI) particles have significant potential to remediate contaminated source zones. However, the transport of these particles through porous media is not well understood, especially at the field scale. This paper describes the simulation of a field injection of carboxylmethyl cellulose (CMC) stabilized nZVI using a 3D compositional simulator, modified to include colloidal filtration theory (CFT). The model includes composition dependent viscosity and spatially and temporally variable velocity, appropriate for the simulation of push-pull tests (PPTs) with CMC stabilized nZVI. Using only attachment efficiency as a fitting parameter, model results were in good agreement with field observations when spatially variable viscosity effects on collision efficiency were included in the transport modeling. This implies that CFT-modified transport equations can be used to simulate stabilized nZVI field transport. Model results show that an increase in solution viscosity, resulting from injection of CMC stabilized nZVI suspension, affects nZVI mobility by decreasing attachment as well as changing the hydraulics of the system. This effect is especially noticeable with intermittent pumping during PPTs. Results from this study suggest that careful consideration of nZVI suspension formulation is important for optimal delivery of nZVI which can be facilitated with the use of a compositional simulator.
Assuntos
Carboximetilcelulose Sódica/química , Água Subterrânea/química , Ferro/química , Modelos Teóricos , Recuperação e Remediação Ambiental , Reprodutibilidade dos Testes , Viscosidade , Movimentos da ÁguaRESUMO
Aqueous-phase catalyzed reduction of organic contaminants via zerovalent copper nanoparticles (nCu0), coupled with borohydride (hydrogen donor), has shown promising results. So far, the research on nCu0 as a remedial treatment has focused mainly on contaminant removal efficiencies and degradation mechanisms. Our study has examined the effects of Cu0/Cun+ ratio, surface poisoning (presence of chloride, sulfides, humic acid (HA)), and regeneration of Cu0 sites on catalytic dechlorination of aqueous-phase 1,2-dichloroethane (1,2-DCA) via nCu0-borohydride. Scanning electron microscopy confirmed the nano size and quasi-spherical shape of nCu0 particles. X-ray diffraction confirmed the presence of Cu0 and Cu2O and x-ray photoelectron spectroscopy also provided the Cu0/Cun+ ratios. Reactivity experiments showed that nCu0 was incapable of utilizing H2 from borohydride left over during nCu0 synthesis and, hence, additional borohydride was essential for 1,2-DCA dechlorination. Washing the nCu0 particles improved their Cu0/Cun+ ratio (1.27) and 92% 1,2-DCA was removed in 7 h with kobs = 0.345 h-1 as compared to only 44% by unwashed nCu0 (0.158 h-1) with Cu0/Cun+ ratio of 0.59, in the presence of borohydride. The presence of chloride (1000-2000 mg L-1), sulfides (0.4-4 mg L-1), and HA (10-30 mg L-1) suppressed 1,2-DCA dechlorination; which was improved by additional borohydride probably via regeneration of Cu0 sites. Coating the particles decreased their catalytic dechlorination efficiency. 85-90% of the removed 1,2-DCA was recovered as chloride. Chloroethane and ethane were main dechlorination products indicating hydrogenolysis as the major pathway. Our results imply that synthesis parameters and groundwater solutes control nCu0 catalytic activity by altering its physico-chemical properties. Thus, these factors should be considered to develop an efficient remedial design for practical applications of nCu0-borohydride.
RESUMO
Per- and polyfluoroalkyl substances (PFAS) are emerging contaminants that have been used extensively as firefighting agents and in a wide range of commercial applications around the world. As many of the most-common PFAS components are surfactants, they readily accumulate at interfaces, a process that can govern their environmental fate. There are thousands of PFAS compounds, and they have nearly always been used as mixtures, so it is common to find many different PFAS components present together in the environment. Furthermore, the interfacial behavior of ionic PFAS can be strongly influenced by the presence of salts, with adsorption dependent on both the composition and concentration of salts present. Any predictions of PFAS interfacial behavior made without considering both the mixed nature of PFAS present, as well as the composition of the salts present, have the potential to be off by orders of magnitude. To date, models capable of making predictions of PFAS interfacial adsorption when both mixed PFAS and mixed salts are present have not been presented. The work described here addresses this need by extending a mass-action model developed previously by the authors to allow predictions in cases where complex combinations of mixed PFAS and mixed salts are present. Predictions of PFAS interfacial affinity for a range of PFAS mixture conditions and ionic strengths are verified using experimentally-measured surface tension data. The new model provides physically-realistic prediction of interfacial adsorption of a wide range of PFAS mixtures over a wide range of salt concentrations and compositions. The model is capable of predicting interfacial adsorption of ionic/nonionic PFAS mixtures in the presence of salts, and can also make predictions when there is competitive adsorption between different PFAS components, a common case in PFAS source zones where high concentrations of multiple components are present and in foam fractionation reactors.
Assuntos
Fluorocarbonos , Sais , Adsorção , Tensão Superficial , Tensoativos , ÁguaRESUMO
The transport of particles through groundwater systems is governed by a complex interplay of mechanical and chemical forces that are ultimately responsible for binding to geological substrates. To understand these forces in the context of zero valent iron particles used in the remediation of groundwater, atomic force microscopy (AFM)-based force spectroscopy was employed to characterize the interactions between AFM tips modified with either carbonyl iron particles (CIP) or electrodeposited Fe as a function of counterion valency, temperature, particle morphology, and age. The measured interaction forces were always attractive for both fresh and aged CIP and electrodeposited iron, except in 100 mM NaCl, as a consequence of electrostatic attraction between the negatively charged mica and positively charged iron. In 100 mM NaCl, repulsive hydration forces appeared to dominate. Good agreement was found between the experimental data and predictions based on the extended DLVO (XDLVO) theory. The effect of aging on iron particle composition and morphology was assessed by X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS) revealing that the aged particles comprising a zero valent iron core passivated by a mixture of iron oxides and hydroxides. Force spectroscopy showed that aging caused variations in the adhesive force due to the changes in particle morphology and contact area.