Rapid detection of ciguatoxins in Gambierdiscus and Fukuyoa with immunosensing tools.

Consumption of seafood contaminated with ciguatoxins (CTXs) leads to a foodborne disease known as ciguatera. Primary producers of CTXs are epibenthic dinoflagellates of the genera Gambierdiscus and Fukuyoa. In this study, thirteen Gambierdiscus and Fukuyoa strains were cultured, harvested at exponential phase, and CTXs were extracted with an implemented rapid protocol. Microalgal extracts were obtained from pellets with a low cell abundance (20,000 cell/mL) and were then analyzed with magnetic bead (MB)-based immunosensing tools (colorimetric immunoassay and electrochemical immunosensor). It is the first time that these approaches are used to screen Gambierdiscus and Fukuyoa strains, providing not only a global indication of the presence of CTXs, but also the ability to discriminate between two series of congeners (CTX1B and CTX3C). Analysis of the microalgal extracts revealed the presence of CTXs in 11 out of 13 strains and provided new information about Gambierdiscus and Fukuyoa toxin profiles. The use of immunosensing tools in the analysis of microalgal extracts facilitates the elucidation of further knowledge regarding these dinoflagellate genera and can contribute to improved ciguatera risk assessment and management.

Probing high-affinity 11-mer DNA aptamer against Lup an 1 (ß-conglutin).

Aptamers are synthetic nucleic acids with great potential as analytical tools. However, the length of selected aptamers (typically 60-100 bases) can affect affinity, due to the presence of bases not required for interaction with the target, and therefore, the truncation of these selected sequences and identification of binding domains is a critical step to produce potent aptamers with higher affinities and specificities and lowered production costs. In this paper we report the truncation of an aptamer that specifically binds to ß-conglutin (Lup an 1), an anaphylactic allergen. Through comparing the predicted secondary structures of the aptamers, a hairpin structure with a G-rich loop was determined to be the binding motif. The highest affinity was observed with a truncation resulting in an 11-mer sequence that had an apparent equilibrium dissociation constant (K D) of 1.7 × 10(-9) M. This 11-mer sequence was demonstrated to have high specificity for ß-conglutin and showed no cross-reactivity to other lupin conglutins (α-, δ-, γ-conglutins) and closely related proteins such as gliadin. Finally, the structure of the truncated 11-mer aptamer was preliminarily elucidated, and the GQRS Mapper strongly predicted the presence of a G-quadruplex, which was subsequently corroborated using one-dimensional NMR, thus highlighting the stability of the truncated structure.

Selection of 2'F-modified RNA aptamers against prostate-specific antigen and their evaluation for diagnostic and therapeutic applications.

Currently, prostate-specific antigen (PSA) is considered to be the most sensitive marker available for prostate cancer detection and for monitoring of disease progression. In addition to its importance as a tumor marker, PSA has a role in the biological activity of cancer growth and proliferation. Therefore, the inhibition or activation of its biological activity may be used in prostate cancer therapy. Here, we describe the isolation and characterization of new 2'F-modified RNA aptamers directed against PSA. Binding studies demonstrate the ability of these new aptamers to specifically recognize their target with dissociation constants in the nanomolar range. In order to demonstrate the functionality of the selected aptamers, an apta-PCR approach was used for the quantitative detection of PSA, achieving a limit of detection of 11 nM. Furthermore, the potential use of the selected aptamers in therapeutics was demonstrated with the 2'F-modified aptamers being highly stable in human serum and having the ability to moderate the activity of PSA, which will be explored for the treatment of prostate cancer.

Comparison of different methods for generation of single-stranded DNA for SELEX processes.

Single-stranded DNA (ssDNA) generation is a crucial step in several molecular biology applications, such as sequencing or DNA chip and microarray technology. Molecules of ssDNA also play a key role in the selection of ssDNA aptamers through Systematic Evolution of Ligands by EXponential enrichment (SELEX). With particular interest for this application, herein we present a comparative study of the most used methods for generation of ssDNA used in SELEX, such as asymmetric PCR, enzyme digestion and magnetic separation with streptavidin beads. In addition, we evaluate a new technique that combines asymmetric PCR and enzyme digestion with the aim to achieve the maximum efficiency in ssDNA generation. The methods studied were compared in terms of quality of ssDNA using electrophoretic analysis and generated ssDNA yields were quantitatively measured using an Enzyme-Linked OligoNucleotide Assay (ELONA).

Biogenic Amines Formation Mechanism and Determination Strategies: Future Challenges and Limitations.

The evolution in foodstuff-monitoring processes has increased the number of studies on biogenic amines (BAs), in recent years. This trend with future perspective needs to be assembled to address the associated health risks. Thus, this study aims to cover three main aspects of BAs: (i) occurrence, physiology, and toxicological effects, most probable formation mechanisms and factors controlling their growth; (ii) recent advances, strategies for determination, preconcentration steps, model technique, and nature of the matrix; and (iii) milestone, limitations with existing methodologies, future trends, and detailed expected developments for clinical use and on-site ultra-trace determination. The core of the ongoing review will discuss recent trends in pre-concentration toward miniaturization, automation, and possible coupling with electrochemical techniques, surface-enhanced Raman scattering, spectrofluorimetry, and lateral flow protocols to be exploited for the development of rapid, facile, and sensitive on-site determination strategies for BAs.

Addressed immobilization of biofunctionalized diatoms on electrodes by gold electrodeposition.

Diatoms are single cell microalgae with a silica shell (frustule), which possess a micro/nanoporous pattern of unparalleled diversity far beyond the possibilities of current micro- and nanofabrication techniques. To explore diatoms as natural three-dimensional nanostructured supports in sensing and biosensing devices, a simple, rapid and stable method to immobilize diatoms via gold electrodeposition is described. In this process, gold microstructures are formed, immobilizing diatoms by entrapment or crossing their nanopores. Varying the applied potential, time and HAuCl4 concentration, gold deposits of different morphologies and roughness are obtained, thereby determining the diatom immobilization process. Optical and scanning electron microscopy have been used to characterize diatom immobilization yields, the morphology of the gold microstructures, and the morphological integrity of diatoms. Cyclic voltammetry has been performed to characterize the gold deposits and to demonstrate the enhanced electrocatalytic activity of the gold-diatom electrodes. Electro-addressed immobilization of different diatoms on specific bands of interdigitated electrode arrays has been achieved, highlighting the potential application of diatoms for site-specific immobilization on microarrays. The feasibility to combine tailored immobilization with diatom biofunctionalization has also been demonstrated. Antibody-functionalized diatoms were immobilized on electrodes retaining their ability to detect its cognate antigen. The reported method exploits the natural three-dimensional nanostructures of diatoms together with their easy modification with biomolecules and the simplicity of gold electrodeposition to produce micro/nanostructured and highly electrocatalytic electrodes, providing low-cost and eco-friendly platforms and arrays with potential application in biosensing devices.

Electrochemical primer extension for the detection of single nucleotide polymorphisms in the cardiomyopathy associated MYH7 gene.

We report the labelling of dideoxy nucleotides (ddNTPs) for use in electrochemical array based primer extension for the detection of single nucleotide polymorphisms (SNPs). The results confirm the extension of the immobilised primers for each of the four ddNTPs, representing a significant advance in achieving a cost-effective platform for screening of disease-specific SNPs.

Multiplex PCB-based electrochemical detection of cancer biomarkers using MLPA-barcode approach.

Asymmetric multiplex ligation-dependent probe amplification (MLPA) was developed for the amplification of seven breast cancer related mRNA markers and the MLPA products were electrochemically detected via hybridization. Seven breast cancer genetic markers were amplified by means of the MLPA reaction, which allows for multiplex amplification of multiple targets with a single primer pair. Novel synthetic MLPA probes were designed to include a unique barcode sequence in each amplified gene. Capture probes complementary to each of the barcode sequences were immobilized on each electrode of a low-cost electrode microarray manufactured on standard printed circuit board (PCB) substrates. The functionalised electrodes were exposed to the single-stranded MLPA products and following hybridization, a horseradish peroxidase (HRP)-labelled DNA secondary probe complementary to the amplified strand completed the genocomplex, which was electrochemically detected following substrate addition. The electrode arrays fabricated using PCB technology exhibited an excellent electrochemical performance, equivalent to planar photolithographically-fabricated gold electrodes, but at a vastly reduced cost (>50 times lower per array). The optimised system was demonstrated to be highly specific with negligible cross-reactivity allowing the simultaneous detection of the seven mRNA markers, with limits of detections as low as 25pM. This approach provides a novel strategy for the genetic profiling of tumour cells via integrated "amplification-to-detection".

Demonstration of labeless detection of food pathogens using electrochemical redox probe and screen printed gold electrodes.

The demonstration of a labeless immunosensor for the detection of pathogenic bacteria using screen printed gold electrodes (SPGEs) and a potassium hexacyanoferrate(II) redox probe is reported. Gold electrodes were produced using screen printing and the gold surfaces were modified by a thiol based self assembled monolayer (SAM) to facilitate antibody immobilisation. SAMs based on the use of thioctic acid (TA), mercaptopropionic acid (MPA) and mercaptoundecanoic acid (MUA) were evaluated. Following antibody immobilisation via the optimum SAM, the redox behaviour and diffusion co-efficient (D) of the potassium hexacyanoferrate(II) probe was monitored in the absence and presence of analyte. In the presence of analyte, a change in the apparent diffusion co-efficient of the redox probe was observed, attributable to impedance of the diffusion of redox electrons to the electrode surface due to the formation of the antibody-bacteria immunocomplex. No change in the diffusion co-efficient was observed when a non-specific antibody (mouse IgG) was immobilised and antigen added. The system has been demonstrated with Listeria monocytogenes and Bacillus cereus.

Aortic root complications in Marfan's syndrome: identification of a lower risk group.

OBJECTIVES: The purpose of this study was to examine clinical and echocardiographic predictors of outcome in a cohort of patients with Marfan's syndrome. BACKGROUND: Serial echocardiographic measurements of aortic root dimensions are an important clinical method for monitoring patients with Marfan's syndrome. However, there are few data on the prognostic importance of echocardiographic variables for risk stratification and timing of aortic root replacement. METHODS: In 89 consecutive patients with Marfan's syndrome (age range 1-54 years) clinical and serial echocardiographic data (n = 62) were evaluated as potential predictors of outcome (mean (range) follow up 4 (< 1-16) years). Aortic sinus diameter and an aortic ratio normalised for age and body surface area were examined using Kaplan-Meier life table and Cox regression analysis, with the end point defined as death or surgery for ascending aortic dissection and events defined as an end point or surgery for ascending aortic aneurysm. RESULTS: Overall actuarial survival at two and five years was 96% and 92% and event free survival was 85% and 76%, respectively. There were five deaths due to aortic dissection, four patients survived surgery for ascending dissection, and nine underwent root replacement with a composite graft for ascending aneurysm. Those with aortic events were older (35 (12) v 25 (13) years, P = 0.007) and had greater initial aortic root dimensions (47 (14) v 33 (8) mm, P < 0.0001) and ratios (1.6 (0.5) v 1.3 (0.2), P < 0.0001). In the 62 patients with serial echocardiographic follow up, the rate of aortic root dilatation was more rapid in those with events (15 (17) v 0 (3)%/year, P < 0.0001). Utilising a Cox proportional hazards model, the groups with an initial aortic ratio > or = 1.3 or an annual change in aortic ratio > or = 5% had a relative risk of an aortic complication of 2.7 and 4.1, respectively (95% confidence limits 1.5 to 4.8 and 1.8 to 9.3). Only one of 31 patients with an initial aortic ratio of < 1.3 and a rate of change of < 5% had an event (five year event free survival 97%). CONCLUSIONS: A low risk subgroup of patients with Marfan's syndrome can be identified as those with an aortic ratio < 1.3 and an annual change in aortic ratio of < 5%. These findings are helpful in optimising echocardiographic monitoring and risk stratification of patients with Marfan's syndrome.

The use of polymers coupled with metallised electrodes to allow H(2)O(2) detection in the presence of electrochemical interferences.

One of the most important parameters to be considered when developing a biosensor based on the use of oxidase enzymes is the selective determination of H(2)O(2) in the presence of easily oxidisable interferents. In this work one approach was taken to overcome this problem-the use of metallised carbon electrodes in conjunction with polymers. Polymers, both conducting and nonconducting, have recently become very interesting materials for the suppression of interferences. They are easy to grow on any electrode surface and the extensive range of polymers available provides a huge scope for the large variety of sensors that exist today. They can be grown in organic or aqueous media. In this work, three polymers (polypyrrole, polyaniline and 1,3-diaminobenzene) were examined for their interferent-preventing potential on several types of electrodes. Previous work carried out at the Laboratory of Sensor Development has shown the co-deposition of ruthenium and rhodium on carbon to provide an electrode surface which is highly catalytic and selective towards H(2)O(2)[1]. The co-deposition of Ru, Rh and Pt, as well as Pt on Ru-Rh electrodes was investigated and all these transducers were coupled with the use of the polymers for enhanced elimination of interferences with highly promising results obtained. The best system was seen to be a Ru-Rh metallised electrode polymerised with poly(1,3-diaminobenzene). At an applied potential of +100 mV the response to H(2)O(2) was approximately 200 times greater than the response of any of the potential interferences.

Use of oxygen sensors to non-destructively measure the oxygen content in modified atmosphere and vacuum packed beef: impact of oxygen content on lipid oxidation.

The ability of optical oxygen sensors to monitor the levels of oxygen in raw and cooked beef was investigated. Raw and cooked beef slices were vacuum packaged and cooked beef slices were modified atmosphere packaged MAP, (60% N(2): 40% CO(2)) and held under refrigerated display (4 °C) for 15 or 35 days for MAP and vacuum packed samples, respectively. Oxygen sensors attached to the inside of the lidding material in modified atmosphere packages, or inserted into vacuum packages, were capable of monitoring changes in oxygen levels in all packaged samples. Lipid oxidation of samples was measured at regular intervals. Oxygen contents detected, ranged from 1.15 to 1.26% and 0.07-0.55% in MAP and vacuum packed samples, respectively. Samples containing greatest levels of oxygen were most oxidised and cooked samples were significantly (P<0.05) more oxidised than raw samples.

FRET-based dimeric aptamer probe for selective and sensitive Lup an 1 allergen detection.

A sensitive method for the rapid and sensitive detection of the anaphylactic food allergen Lup an 1 (ß-conglutin) exploiting fluorescence resonance energy transfer (FRET) has been developed. A high affinity dimeric form of a truncated 11-mer aptamer against ß-conglutin was used, with each monomeric aptamer being flanked by donor/acceptor moieties. The dimeric form in the absence of target yields fluorescence emission due to the FRET from the excited fluorophore to the proximal second fluorophore. However, upon addition of ß-conglutin, the specific interaction induces a change in the bi-aptameric structure resulting in an increase in fluorescence emission. The method is highly specific and sensitive, with a detection limit of 150 pM, providing an effective tool for the direct detection of the toxic ß-conglutin subunit in foodstuffs in just 1 min at room temperature.

Fabrication and functionalization of PCB gold electrodes suitable for DNA-based electrochemical sensing.

The request of high specificity and selectivity sensors suitable for mass production is a constant demand in medical research. For applications in point-of-care diagnostics and therapy, there is a high demand for low cost and rapid sensing platforms. This paper describes the fabrication and functionalization of gold electrodes arrays for the detection of deoxyribonucleic acid (DNA) in printed circuit board (PCB) technology. The process can be implemented to produce efficiently a large number of biosensors. We report an electrolytic plating procedure to fabricate low-density gold microarrays on PCB suitable for electrochemical DNA detection in research fields such as cancer diagnostics or pharmacogenetics, where biosensors are usually targeted to detect a small number of genes. PCB technology allows producing high precision, fast and low cost microelectrodes. The surface of the microarray is functionalized with self-assembled monolayers of mercaptoundodecanoic acid or thiolated DNA. The PCB microarray is tested by cyclic voltammetry in presence of 5 mM of the redox probe K3Fe(CN6) in 0.1 M KCl. The voltammograms prove the correct immobilization of both the alkanethiol systems. The sensor is tested for detecting relevant markers for breast cancer. Results for 5 nM of the target TACSTD1 against the complementary TACSTD1 and non-complementary GRP, MYC, SCGB2A1, SCGB2A2, TOP2A probes show a remarkable detection limit of 0.05 nM and a high specificity.

Electrochemical immunosensor detection of antigliadin antibodies from real human serum.

The determination of antigliadin antibodies from human serum samples is of vital importance for the diagnosis of an autoimmune disease such as celiac disease. An electrochemical immunosensor that mimics traditional ELISA type architecture has been constructed for the detection of antigliadin antibodies with control over the orientation and packing of gliadin antigen molecules on the surface of gold electrodes. The orientation of the antigen on the surface has been achieved using a carboxylic-ended bipodal alkanethiol that is covalently linked with amino groups of the antigen protein. The bipodal thiol presents a long poly(ethyleneglycol)-modified chain that acts as an excellent non-specific adsorption barrier. The bipodal nature of the thiol ensured a good spacing and hence good diffusion properties of electroactive species through the self-assembled monolayer, which is vital for the efficiency of the constructed electrochemical immunosensor. The electrochemical immunosensor was characterized using surface plasmon resonance as well as electrochemical impedance spectroscopy. Amperometric evaluation of the sensor with polyclonal antigliadin antibodies showed stable and reproducible low limits of detection (46 ng/mL; % RSD = 8.2, n = 5). The behaviour and performance of the electrochemical immunosensor with more complex matrixes such as reference serum solutions and real patient samples was evaluated and compared with commercial ELISA kits demonstrating an excellent degree of correlation in thirty minutes total assay time; the electrochemical immunosensor not only delivers a positive or negative result, it allows the estimation of semi-quantitative antibody contents based on the comparison against clinical reference solutions.

Electrochemical biosensor for the multiplexed detection of human papillomavirus genes.

A proof-of-concept of an electrochemical genosensor array for the individual and simultaneous detection of two high-risk human papillomavirus DNA sequences, HPV16E7p and HPV45E6 that exhibits high sensitivity and selectivity is reported. The optimum conditions for surface chemistry preparation and detection of hybridised target were investigated. The LOD obtained are in the pM range, which are sufficient for most real RNA/DNA samples obtained from PCR amplification, usually in the nanomolar range. In a multiplexed detection format, high selectivity was observed over the non-specific sequence, opening the way for the development of an electrochemical high throughput screening assay for multiple high-risk DNA sequences.

Bipodal PEGylated alkanethiol for the enhanced electrochemical detection of genetic markers involved in breast cancer.

Extensive research efforts continue to be invested in the development of low-density electrochemical DNA sensor arrays for application in theranostics and pharmacogenomics. Rapid and low-cost technologies are thus required for genosensor arrays to impact on current medical practice, with sensors clearly being required to detect their targets with high sensitivity and specificity, whilst resisting biofouling and avoiding interfering signals from the sample matrix. We report on the performance of three polyethylene glycol (PEG) co-immobilisation strategies used in the preparation of DNA sensors, using the detection of the breast cancer marker oestrogen receptor-α as a model system. PEGylated DNA capture probes for oestrogen receptor-α were co-immobilised in the presence of either a PEG alkanethiol, a mixture of PEG alkanethiol and mercaptohexanol or a bipodal aromatic PEG alkanethiol. Electrochemical impedance spectroscopy and pulsed amperometry were employed to characterise the prepared surface and sensitivity of the sensor. A surface plasmon resonance study was additionally carried out to confirm the results obtained electrochemically. Finally, the best co-immobilisation system, consisting of the co-assembly of oestrogen receptor-α capture probes and bipodal aromatic PEG alkanethiol in a ratio of 1:100, was used for the electrochemical analysis of a PCR product resulting from the amplification of the genetic material extracted from 20 MCF7 cells. This novel co-immobilisation system exhibited both high electrochemical sensitivity and resistance to fouling believed to results from an enhanced electron permeability and surface hydrophilicity.

Electrochemcial characterisation and hybridisation efficiency of co-assembled monolayers of PEGylated ssDNA and mercaptohexanol on planar gold electrodes.

The realisation of efficient genosensors relies crucially on the surface chemistry strategy selected for the immobilisation of DNA probes. We report on the performance of surfaces prepared via the direct co-immobilisation of a 20-nucleotide (nt) thiolated single stranded DNA probe (ssDNA) in the presence of the short alkanethiol mercaptohexanol (MCH) at varying ratio. Electrochemical impedance spectroscopy was used for the physical characterisation of the formed monolayers. Functional characterisation of the surfaces was achieved by means of differential pulse voltammetry and calibration curves in the range 6.25-100 nM of the complementary sequence 104 nt in length were obtained for each surface studied, using the guanine specific redox marker methylene blue (MB) as hybridisation indicator. The best sensor performance was obtained for a ratio of 1:100, as previously suggested by electrochemical impedance spectroscopy. No hybridisation could be measured at 1:1 ratio and significantly lower hybridisation were recorded for surfaces prepared at 1:10 and 1:1000 ratio. For comparison, sensors prepared via initial thiolated ssDNA immobilisation followed by the backfilling of the surface with MCH, as widely reported, were also assessed. Our results suggested that the performances of such sensors were sub-optimum and comparable to that obtained at 1:10 co-immobilisation. We concluded that the co-immobilisation approach offers several advantages, with highly reliable surfaces being prepared in a single step.

Electrochemical quantification of DNA amplicons via the detection of non-hybridised guanine bases on low-density electrode arrays.

A new strategy for the electrochemical detection and signal amplification of DNA at gold electrodes is described. Current methodologies for DNA biosensing based on the electrochemical detection of electroactive base-specific labels such as methylene blue (MB) suffer from lengthy incubation and washing steps. Addressing these limitations, we report a novel approach for the electrochemical quantification of surface hybrid, using the control gene LTA, 107 bases long, as a model target. An array of 15 gold electrodes was used to detect the formation of hybridised duplex following interaction of non-hybridised guanine bases with MB present in solution. Upon hybridisation the number of free guanines present at the electrode surface increased from 8 to 25 due to guanine bases present in the target sequence which did not participate in hybridisation and remained free to interact directly with methylene blue. This increase in free guanines consequently concentrated MB directly at the electrode surface. We found that the MB signal recorded for 100 nM of the complementary LTA was typically 2.14 times higher than that of the non-hybridised state. Very low cross-reactivity (<7%) with a non-complementary probe was recorded. The assay was optimised with regards to methylene blue concentration, hybridisation time and regeneration. The assay was quantitative and linear in the range of 6.25-50 nM target DNA exhibiting an LOD of 17.5 nM. The assay was rapid and easy to perform, with no need for lengthy incubations with the methylene blue label or requirement for washing steps. Ongoing work addresses the impact of guanine location on the signal in order to tailor design specific signalling domains of PCR products.

Mitral regurgitation as a complication of MI: pathophysiology and nursing implications.

Mitral regurgitation as a complication of myocardial infarction may be caused by papillary muscle dysfunction, papillary muscle rupture, or rupture of the chordae tendineae. Prompt diagnosis and intervention are necessary to reduce associated mortality and morbidity. The cardiovascular nurse is integrally involved in all phases of treatment for this condition. The pathophysiology, clinical course, and current treatment modalities utilized for postinfarction mitral regurgitation are described, enabling the cardiovascular nurse to develop a comprehensive plan of care.