Developing a cell-bound detection system for the screening of oxidase activity using the fluorescent peroxide sensor roGFP2-Orp1.

Accurate yet efficient high-throughput screenings have emerged as essential technology for enzyme engineering via directed evolution. Modern high-throughput screening platforms for oxidoreductases are commonly assisted by technologies such as surface display and rely on emulsification techniques to facilitate single-cell analysis via fluorescence-activated cell sorting. Empowered by the dramatically increased throughput, the screening of significantly larger sequence spaces in acceptable time frames is achieved but usually comes at the cost of restricted applicability. In this work, we tackle this problem by utilizing roGFP2-Orp1 as a fluorescent one-component detection system for enzymatic H2O2 formation. We determined the kinetic parameters of the roGFP2-Orp1 reaction with H2O2 and established an efficient immobilization technique for the sensor on Saccharomyces cerevisiae cells employing the lectin Concanavalin A. This allowed to realize a peroxide-sensing shell on enzyme-displaying cells, a system that was successfully employed to screen for H2O2 formation of enzyme variants in a whole-cell setting.

Myeloperoxidase: a target for new drug development?

Myeloperoxidase (MPO), a member of the haem peroxidase-cyclooxygenase superfamily, is abundantly expressed in neutrophils and to a lesser extent in monocytes and certain type of macrophages. MPO participates in innate immune defence mechanism through formation of microbicidal reactive oxidants and diffusible radical species. A unique activity of MPO is its ability to use chloride as a cosubstrate with hydrogen peroxide to generate chlorinating oxidants such as hypochlorous acid, a potent antimicrobial agent. However, evidence has emerged that MPO-derived oxidants contribute to tissue damage and the initiation and propagation of acute and chronic vascular inflammatory disease. The fact that circulating levels of MPO have been shown to predict risks for major adverse cardiac events and that levels of MPO-derived chlorinated compounds are specific biomarkers for disease progression, has attracted considerable interest in the development of therapeutically useful MPO inhibitors. Today, detailed information on the structure of ferric MPO and its complexes with low- and high-spin ligands is available. This, together with a thorough understanding of reaction mechanisms including redox properties of intermediates, enables a rationale attempt in developing specific MPO inhibitors that still maintain MPO activity during host defence and bacterial killing but interfere with pathophysiologically persistent activation of MPO. The various approaches to inhibit enzyme activity of MPO and to ameliorate adverse effects of MPO-derived oxidants will be discussed. Emphasis will be put on mechanism-based inhibitors and high-throughput screening of compounds as well as the discussion of physiologically useful HOCl scavengers.

Reaction of E. coli catalase HPII with cyanide as ligand and as inhibitor.

Cyanide forms an inhibitory complex with the haem d-containing E. coli catalase HPII, spectrally similar to the cyanide complex of beef liver enzyme but with absorption bands shifted 90 nm towards the red end of the spectrum. Both the Kd and Ki values are approximately 7 microM in the wild-type enzyme. The cyanide reaction is slow, with a bimolecular 'on' constant approx. 2000 x smaller than that of eukaryotic enzyme, and an 'off' constant diminished by a similar amount. Catalases with a mutated distal histidine (H128) fail to bind cyanide at cyanide concentrations below 50 mM. Catalases with a mutated distal asparagine (N201) show only small changes in cyanide affinity from the wild type. The major fraction of HPII N201A has a Kd approximately 40 microM, and a minor fraction has a lower cyanide affinity; the major fraction of HPII N201Q has a Kd approximately 15 microM. The Kd and Ki for HPII N201D is approximately 8 microM, essentially identical with that of the wild type but N201D appears to bind cyanide somewhat more rapidly than does wild-type enzyme. The HPII mutant N201H can be obtained in both haem d and protohaem forms; it exhibits two types of cyanide binding behaviour. In its protohaem form it binds cyanide poorly (Kd > or = 0.25 mM). After peroxide treatment converts t into haem d or a closely related species it binds cyanide with a much higher affinity (Kd approximately 15 microM). Cyanide binding to HPII requires a distal histidine to provide hydrogen-bonding stability, but not a distal asparagine. Rates of cyanide binding and release are controlled by haem group accessibility through the channel leading to the outside. In HPII N201H channel opening may depend upon oxidation of the haem from the starting protohaem to the final haem d form.

Spectral and kinetic studies on eosinophil peroxidase compounds I and II and their reaction with ascorbate and tyrosine.

Eosinophil peroxidase, the major granule protein in eosinophils, is the least studied human peroxidase. Here, we have performed spectral and kinetic measurements to study the nature of eosinophil peroxidase intermediates, compounds I and II, and their reduction by the endogenous one-electron donors ascorbate and tyrosine using the sequential-mixing stopped-flow technique. We demonstrate that the peroxidase cycle of eosinophil peroxidase involves a ferryl/porphyrin radical compound I and a ferryl compound II. In the absence of electron donors, compound I is shown to be transformed to a species with a compound II-like spectrum. In the presence of ascorbate or tyrosine compound I is reduced to compound II with a second-order rate constant of (1.0+/-0.2)x10(6) M(-1) s(-1) and (3.5+/-0.2)x10(5) M(-1) s(-1), respectively (pH 7.0, 15 degrees C). Compound II is then reduced by ascorbate and tyrosine to native enzyme with a second-order rate constant of (6.7+/-0.06)x10(3) M(-1) s(-1) and (2.7+/-0.06)x10(4) M(-1) s(-1), respectively. This study revealed that eosinophil peroxidase compounds I and II are able to react with tyrosine and ascorbate via one-electron oxidations and therefore generate monodehydroascorbate and tyrosyl radicals. The relatively fast rates of the compound I reduction demonstrate that these reactions may take place in vivo and are physiologically relevant.

Transient-state and steady-state kinetics of the oxidation of aliphatic and aromatic thiols by horseradish peroxidase.

In the course of oxidation of thiols by peroxidases thiyl radicals are formed which are known to undergo several free-radical conjugative reactions, among others leading to hydrogen peroxide formation. The present paper for the first time presents a comparative transient-state and steady-state investigation of the reaction of 15 aliphatic and aromatic mono- and dithiols with horseradish peroxidase (HRP). Both sequential-stopped-flow spectrophotometric investigations of the reaction of HRP intermediates Compound I (k2) and Compound II (k3) with thiols and measurements of the overall thiol oxidation and the simultaneous oxygen consumption in the presence and absence of exogenously added hydrogen peroxide (10 microM) have been performed. With HRP as thiyl radical generator it was shown that three groups of thiols have to be distinguished: (i) Aromatic thiols (e.g. thiophenol, 2-mercaptopurine) were excellent electron donors of both Compounds (k2: 10(4)-10(7) M(-1) s(-1) and k3: 10(3)-10(6) M(-1) s(-1)); however, the overall reaction was shown to depend on addition of hydrogen peroxide, indicating insufficient peroxide regeneration by arylthiyl radicals. (ii) Aliphatic thiols which were extremely bad substrates (k3 < 10 M(-1) s(-1)) for HRP (e.g. homocysteine, glutathione) and/or have a pK(a,SH) > 9.5 (e.g. N-acetylcysteine, alpha-lipoic acid) were also shown to depend on exogenously added H2O2 to maintain the peroxidasic reaction, whereas (iii) with those thiols with rates of k3 between 11 and 1600 M(-1) s(-1) (e.g. cysteine, cysteamine, cysteine methyl ester, cysteine ethyl ester) and/or with a pK(a,SH) < 8 (penicillamine) thiol oxidation was independent of exogenously added hydrogen peroxide, indicating sufficient hydrogen peroxide regeneration.

Kinetics of oxidation of aliphatic and aromatic thiols by myeloperoxidase compounds I and II.

Myeloperoxidase (MPO) is the most abundant protein in neutrophils and plays a central role in microbial killing and inflammatory tissue damage. Because most of the non-steroidal anti-inflammatory drugs and other drugs contain a thiol group, it is necessary to understand how these substrates are oxidized by MPO. We have performed transient kinetic measurements to study the oxidation of 14 aliphatic and aromatic mono- and dithiols by the MPO intermediates, Compound I (k3) and Compound II (k4), using sequential mixing stopped-flow techniques. The one-electron reduction of Compound I by aromatic thiols (e.g. methimidazole, 2-mercaptopurine and 6-mercaptopurine) varied by less than a factor of seven (between 1.39 +/- 0.12 x 10(5) M(-1) s(-1) and 9.16 +/- 1.63 x 10(5) M(-1) s(-1)), whereas reduction by aliphatic thiols was demonstrated to depend on their overall net charge and hydrophobic character and not on the percentage of thiol deprotonation or redox potential. Cysteamine, cysteine methyl ester, cysteine ethyl ester and alpha-lipoic acid showed k3 values comparable to aromatic thiols, whereas a free carboxy group (e.g. cysteine, N-acetylcysteine, glutathione) diminished k3 dramatically. The one-electron reduction of Compound II was far more constrained by the nature of the substrate. Reduction by methimidazole, 2-mercaptopurine and 6-mercaptopurine showed second-order rate constants (k4) of 1.33 +/- 0.08 x 10(5) M(-1) s(-1), 5.25 +/- 0.07 x 10(5) M(-1) s(-1) and 3.03 +/- 0.07 x 10(3) M(-1) s(-1). Even at high concentrations cysteine, penicillamine and glutathione could not reduce Compound II, whereas cysteamine (4.27 +/- 0.05 x 10(3) M(-1) s(-1)), cysteine methyl ester (8.14 +/- 0.08 x 10(3) M(-1) s(-1)), cysteine ethyl ester (3.76 +/- 0.17 x 10(3) M(-1) s(-1)) and alpha-lipoic acid (4.78 +/- 0.07 x 10(4) M(-1) s(-1)) were demonstrated to reduce Compound II and thus could be expected to be oxidized by MPO without co-substrates.

The molecular peculiarities of catalase-peroxidases.

In developing ideas of how protein structure modifies haem reactivity, the activity of Class I of the plant peroxidase superfamily (including cytochrome c peroxidase, ascorbate peroxidase and catalase-peroxidases (KatGs)) is an exciting field of research. Despite striking sequence homologies, there are dramatic differences in catalytic activity and substrate specificity with KatGs being the only member with substantial catalase activity. Based on multiple sequence alignment performed for Class I peroxidases, we present a hypothesis for the pronounced catalase activity of KatGs. In their catalytic domains KatGs are shown to possess three large insertions, two of them are typical for KatGs showing highly conserved sequence patterns. Besides an extra C-terminal copy of the ancestral hydroperoxidase gene resulting from gene duplication, these two large loops are likely to control the orientation of both the haem group and of essential residues in the active site. They seem to modulate the access of substrates to the prosthetic group at the distal side as well as the flexibility and character of the bond between the proximal histidine and the ferric iron. The hypothesis presented opens new possibilities in the rational engineering of peroxidases.

Two-electron reduction and one-electron oxidation of organic hydroperoxides by human myeloperoxidase.

The reaction of native myeloperoxidase (MPO) and its redox intermediate compound I with hydrogen peroxide, ethyl hydroperoxide, peroxyacetic acid, t-butyl hydroperoxide, 3-chloroperoxybenzoic acid and cumene hydroperoxide was studied by multi-mixing stopped-flow techniques. Hydroperoxides are decomposed by MPO by two mechanisms. Firstly, the hydroperoxide undergoes a two-electron reduction to its corresponding alcohol and heme iron is oxidized to compound I. At pH 7 and 15 degrees C, the rate constant of the reaction between 3-chloroperoxybenzoic acid and ferric MPO was similar to that with hydrogen peroxide (1.8x10(7) M(-1) s(-1) and 1.4x10(7) M(-1) s(-1), respectively). With the exception of t-butyl hydroperoxide, the rates of compound I formation varied between 5.2x10(5) M(-1) s(-1) and 2.7x10(6) M(-1) s(-1). Secondly, compound I can abstract hydrogen from these peroxides, producing peroxyl radicals and compound II. Compound I reduction is shown to be more than two orders of magnitude slower than compound I formation. Again, with 3-chloroperoxybenzoic acid this reaction is most effective (6. 6x10(4) M(-1) s(-1) at pH 7 and 15 degrees C). Both reactions are controlled by the same ionizable group (average pK(a) of about 4.0) which has to be in its conjugated base form for reaction.

A transient kinetic study on the reactivity of recombinant unprocessed monomeric myeloperoxidase.

Spectral and kinetic features of the redox intermediates of human recombinant unprocessed monomeric myeloperoxidase (recMPO), purified from an engineered Chinese hamster ovary cell line, were studied by the multi-mixing stopped-flow technique. Both the ferric protein and compounds I and II showed essentially the same kinetic behavior as the mature dimeric protein (MPO) isolated from polymorphonuclear leukocytes. Firstly, hydrogen peroxide mediated both oxidation of ferric recMPO to compound I (1.9 x 10(7) M(-1) s(-1), pH 7 and 15 degrees C) and reduction of compound I to compound II (3.0 x 10(4) M(-1) s(-1), pH 7 and 15 degrees C). With chloride, bromide, iodide and thiocyanate compound I was reduced back to the ferric enzyme (3.6 x 10(4) M(-1) s(-1), 1.4 x 10(6) M(-1) s(-1), 1.4 x 10(7) M(-1) s(-1) and 1.4 x 10(7) M(-1) s(-1), respectively), whereas the endogenous one-electron donor ascorbate mediated transformation of compound I to compound II (2.3 x 10(5) M(-1) s(-1)) and of compound II back to the resting enzyme (5.0 x 10(3) M(-1) s(-1)). Comparing the data of this study with those known from the mature enzyme strongly suggests that the processing of the precursor enzyme (recMPO) into the mature form occurs without structural changes at the active site and that the subunits in the mature dimeric enzyme work independently.

Nucleotide sequence analysis, overexpression in Escherichia coli and kinetic characterization of Anacystis nidulans catalase-peroxidase.

Bifunctional catalase-peroxidases are the least understood type of peroxidases. A high-level expression in Escherichia coli of a fully active recombinant form of a catalase-peroxidase (KatG) from the cyanobacterium Anacystis nidulans (Synechococcus PCC 6301) is reported. Since both physical and kinetic characterization revealed its identity with the wild-type protein, the large quantities of recombinant KatG allowed the examination of both the spectral characteristics and the reactivity of its redox intermediates by using the multi-mixing stopped-flow technique. The homodimeric acidic protein (pI = 4.6) contained high catalase activity (apparent K(m) = 4.8 mM and apparent k(cat) = 8850 s(-1)). Cyanide is shown to be an effective inhibitor of the catalase reaction. The second-order rate constant for cyanide binding to the ferric protein is (6.9 +/- 0.2) x 10(5) M(-1 )s(-1) at pH 7.0 and 15 degrees C and the dissociation constant of the cyanide complex is 17 microM. Because of the overwhelming catalase activity, peroxoacetic acid has been used for compound I formation. The apparent second-order rate constant for formation of compound I from the ferric enzyme and peroxoacetic acid is (1.3 +/- 0.3) x 10(4 )M(-1 )s(-1) at pH 7.0 and 15 degrees C. The spectrum of compound I is characterized by about 40% hypochromicity, a Soret region at 406 nm, and isosbestic points between the native enzyme and compound I at 355 and 428 nm. Rate constants for reduction of KatG compound I by o-dianisidine, pyrogallol, aniline and isoniazid are shown to be (7.3 +/- 0.4) x 10(6) M(-1 )s(-1), (5.4 +/- 0.3) x 10(5) M(-1 )s(-1), (1.6 +/- 0.3) x 10(5) M(-1 )s(-1) and (4.3 +/- 0.2) x 10(4) M(-1 )s(-1), respectively. The redox intermediate formed upon reduction of compound I did not exhibit the classical red-shifted peroxidase compound II spectrum which characterizes the presence of a ferryl oxygen species. Its spectral features indicate that the single oxidizing equivalent in KatG compound II is contained on an amino acid which is not electronically coupled to the heme.

Purification and characterization of a hydroperoxidase from the cyanobacterium Synechocystis PCC 6803: identification of its gene by peptide mass mapping using matrix assisted laser desorption ionization time-of-flight mass spectrometry.

A cytosolic catalase-peroxidase from the cyanobacterium Synechocystis PCC 6803 was purified to homogeneity by a six-step purification procedure. It is a homodimeric enzyme with a subunit molecular mass of 85 kDa. The isoelectric point of the protein is at pH 5.5; Michaelis constant, turnover number, and catalytic efficiency of the catalase activity for H2O2 were measured to be 4.8 mM, 3450 s-1, and 7.2 x 10(5) M-1 s-1, respectively. Preparation and spectroscopy of the pyridine ferrohemochrome identified an iron protoporphyrin IX as the prosthetic group. The enzyme was shown to exhibit both catalase and peroxidase activities, both of which were inhibited by cyanide, leading to a high-spin to low-spin transition of the heme iron center as detected by a shift of the Soret peak from 405 to 421 nm. The catalase-specific inhibitor 3-amino-1,2,4-triazole proved ineffective. o-Dianisidine, pyrogallol and guaiacol functioned as a peroxidatic substrate, but no reaction was detected with NADH, NADPH, glutathione, and ascorbate. Peptide mass mapping using matrix assisted laser desorption ionization time-of-flight mass spectrometry showed the identity between the purified protein and a putative katG gene derived from the genome of Synechocystis PCC 6803. A comparison of amino acid sequences of the catalase-peroxidase from Synechocystis PCC 6803 and those from other bacteria showed a high homology around the assumed distal and proximal histidine residues, suggesting a highly conserved histidine as the fifth ligand of the heme iron.

Catalase-peroxidases in cyanobacteria--similarities and differences to ascorbate peroxidases.

Cyanobacteria (blue-green algae) are oxygenic phototrophic bacteria carrying out plant-type photosynthesis. The only hydrogen peroxide scavenging enzymes in at least two unicellular species have been demonstrated to be bifunctional cytosolic catalase-peroxidases (CatPXs) having considerable homology at the active site with plant ascorbate peroxidases (APXs). In this paper we examined optical and kinetic properties of CatPXs from the cyanobacteria Anacystis nidulans and Synechocystis PCC 6803 and discuss similarities and differences to plant APXs. Both CatPXs and APX showed similar spectra of the ferric enzyme, the redox intermediate Compound I and the cyanide complex, whereas the spectrum of CatPX Compound II had characteristics reminiscent of the spectrum of the native enzyme. Both steady-state and multi-mixing transient-state kinetic studies were performed in order to characterize the kinetic behaviour of CatPXs. Bimolecular rate constants of both formation and reduction of a CatPX Compound I are presented. Because of its intrinsic high catalase activity (which cannot be found in APXs), the rate constants for Compound I formation were measured with peroxoacetic acid and are shown to be 5.9 x 10(4) M(-1) s(-1) for CatPX from A. nidulans and 8.7 x 10(3) M(-1) s(-1) for the Synechocystis enzyme. Compared with o-dianisidine (2.7-6.7 x 10(6) M(-1) s(-1)) and pyrogallol (8.6 x 10(4)-1.6 x 10(5) M(-1) s(-1)), the rate constant for Compound I reduction by ascorbate was extremely low (5.4 x 10(3) M(-1) s(-1) at pH 7.0 and 15 degrees C), in marked contrast to the behaviour of APXs.

The respiratory chain of blue-green algae (cyanobacteria).

Electron transport components on the way from reduced substrates to the terminal respiratory oxidase(s) are discussed in relation to analogous and/or homologous enzymes and electron carriers in the generally much better known bacteria, mitochondria and chloroplasts. The kinetic behaviour of the components, their localization within the cell and their evolutionary position are given special attention. Pertinent results from molecular genetics are also mentioned. The unprecedented role of cyanobacteria for our biosphere and our whole planet earth appears to deserve a more extended introductory chapter.

The reactivity of myeloperoxidase compound I formed with hypochlorous acid.

The reaction of human myeloperoxidase (MPO) with hypochlorous acid (HOCl) was investigated by conventional stopped-flow spectroscopy at pH 5, 7, and 9. In the reaction of MPO with HOCl, compound I is formed. Its formation is strongly dependent on pH. HOCl (rather than OCl-) reacts with the unprotonated enzyme in its ferric state. Apparent second-order rate constants were determined to be 8.1 x 10(7) M(-1)s(-1) (pH 5), 2.0 x 10(8) M(-1)s(-1) (pH 7) and 2.0 x 10(6) M(-1)s(-1) (pH 9) at 15 degrees C. Furthermore, the kinetics and spectra of the reactions of halides and thiocyanate and of physiologically relevant one-electron donors (ascorbate, nitrite, tyrosine and hydrogen peroxide) with this compound I were investigated using the sequential-mixing technique. The results show conclusively that the redox intermediates formed upon addition of either hydrogen peroxide or hypochlorous acid to native MPO exhibit the same spectral features and reactivities and thus are identical. In stopped-flow investigations, the MPO/HOCl system has some advantage since: (i) in contrast to H2O2, HOCl cannot function as a one-electron donor of compound I; and (ii) MPO can easily be prevented from cycling by addition of methionine as HOCl scavenger. As a consequence, the observed absorbance changes are bigger and errors in data analysis are smaller.

Oxidation of hydroquinone, 2,3-dimethylhydroquinone and 2,3,5-trimethylhydroquinone by human myeloperoxidase.

Myeloperoxidase is very susceptible to reducing radicals because the reduction potential of the ferric/ferrous redox couple is much higher compared with other peroxidases. Semiquinone radicals are known to reduce heme proteins. Therefore, the kinetics and spectra of the reactions of p-hydroquinone, 2,3-dimethylhydroquinone and 2,3,5-trimethylhydroquinone with compounds I and II were investigated using both sequential-mixing stopped-flow techniques and conventional spectrophotometric measurements. At pH 7 and 15 degrees C the rate constants for compound I reacting with p-hydroquinone, 2,3-dimethylhydroquinone and 2,3,5-trimethylhydroquinone were determined to be 5.6+/-0.4 x 10(7) M(-1)s(-1), 1.3+/-0.1 x 10(6) M(-1)s(-1) and 3.1+/-0.3 x 10(6) M(-1)s(-1), respectively. The corresponding reaction rates for compound II reduction were calculated to be 4.5+/-0.3 x 10(6) M(-1)s(-1), 1.9+/-0.1 x 10(5) M(-1)s(-1) and 4.5+/-0.2 x 10(4) M(-1)s(-1), respectively. Semiquinone radicals, produced by compounds I and II in the classical peroxidation cycle, promote compound III (oxymyeloperoxidase) formation. We could monitor formation of ferrous myeloperoxidase as well as its direct transition to compound II by addition of molecular oxygen. Formation of ferrous myeloperoxidase is shown to depend strongly on the reduction potential of the corresponding redox couple benzoquinone/semiquinone. With 2,3-dimethylhydroquinone and 2,3,5-trimethylhydroquinone as substrate, myeloperoxidase is extremely quickly trapped as compound III. These MPO-typical features could have potential in designing specific drugs which inhibit the production of hypochlorous acid and consequently attenuate inflammatory tissue damage.

Spectral and kinetic studies on the formation of eosinophil peroxidase compound I and its reaction with halides and thiocyanate.

Compound I of peroxidases takes part in both the peroxidation and the halogenation reaction. This study for the first time presents transient kinetic measurements of the formation of compound I of human eosinophil peroxidase (EPO) and its reaction with halides and thiocyanate, using the sequential-mixing stopped-flow technique. Addition of 1 equiv of hydrogen peroxide to native EPO leads to complete formation of compound I. At pH 7 and 15 degrees C, the apparent second-order rate constant is (4.3 +/- 0.4) x 10(7) M(-1) s(-1). The rate for compound I formation by hypochlorous acid is (5.6 +/- 0.7) x 10(7) M(-1) s(-1). EPO compound I is unstable and decays to a stable intermediate with a compound II-like spectrum. At pH 7, the two-electron reduction of compound I to the native enzyme by thiocyanate has a second-order rate constant of (1.0 +/- 0. 5) x 10(8) M(-1) s(-1). Iodide [(9.3 +/- 0.7) x 10(7) M(-1) s(-1)] is shown to be a better electron donor than bromide [(1.9 +/- 0.1) x 10(7) M(-1) s(-1)], whereas chloride oxidation by EPO compound I is extremely slow [(3.1 +/- 0.3) x 10(3) M(-1) s(-1)]. The pH dependence studies suggest that a protonated form of compound I is more competent in oxidizing the anions. The results are discussed in comparison with those of the homologous peroxidases myeloperoxidase and lactoperoxidase and with respect to the role of EPO in host defense and tissue injury.

Activity, peroxide compound formation, and heme d synthesis in Escherichia coli HPII catalase.

Wild-type Escherichia coli HPII catalase (heme d containing) has 15% the activity of beef liver enzyme per heme. The rate constant for compound I formation with H2O2 is 1.3 x 10(6) M(-1) s(-1). HPII compound I reacts with H2O2 to form O2 with a rate constant of 1.8 x 10(6) M(-1) s(-1). Forty percent of HPII hemes are in the compound I state during turnover. Compound I is reduced by ethanol and formate at rates of 5 and 13 M(-1) s(-1) (pH 7.0), respectively. Incubation of HPII compound I with ferrocyanide and ascorbate does not form a compound II species. Mutation of His128 to alanine or asparagine gives inactive protoheme proteins. Mutation of Asn201 gives partially active heme d forms. Asn201Ala has 24%, Asn201Asp 10%, and Asn201Gln 0.4% of wild-type activity. Asn201His contains protoheme when isolated and converts this via protoheme compound I to a heme d species. Both distal heme cavity residues His128 and Asn201 are implicated in catalytic activity, compound I formation, and in situ heme d biosynthesis. HPII Asn201, like the corresponding residue in protoheme catalases, may promote H+ transfer to His128 imidazole, facilitating (i) peroxide anion binding to heme and (ii) stabilization of a transition state for heterolytic cleavage of the O-O bond.

Reaction of myeloperoxidase compound I with chloride, bromide, iodide, and thiocyanate.

Myeloperoxidase plays a fundamental role in oxidant production by neutrophils. The enzyme uses hydrogen peroxide to oxidize chloride (Cl-), bromide (Br-), iodide (I-), and the pseudohalide thiocyanate (SCN-) to their respective hypohalous acids. This study for the first time presents transient kinetic measurements of the oxidation of these halides and thiocyanate by the myeloperoxidase intermediate compound I, using the sequential mixing stopped-flow technique. At pH 7 and 15 degrees C, the two-electron reduction of compound I to the native enzyme by Cl- has a second-order rate constant of (2.5 +/- 0.3) x 10(4) M(-1) s(-1), whereas reduction of compound I by SCN- has a second-order rate constant of (9.6 +/- 0.5) x 10(6) M(-1) s(-1). Iodide [(7.2 +/- 0.7) x 10(6) M(-1) s(-1)] is shown to be a better electron donor for compound I than Br- [(1.1 +/- 0.1) x 10(6) M(-1) s(-1)]. The pH dependence studies suggest that compound I reduction by (pseudo-)halides is controlled by a residue with a pKa of about 4.6. The protonation of this group is necessary for optimum (pseudo-)halide anion oxidation. These transient kinetic results are underlined by steady-state spectral and kinetic investigations. SCN- is shown to be most effective in shifting the system myeloperoxidase/hydrogen peroxide from the peroxidatic cycle to the halogenation cycle, whereas iodide is shown to be more effective than bromide which in turn is much more effective than chloride. Decreasing pH increases the rate of this transition. Our results show that thiocyanate is an important substrate of myeloperoxidase in most environments and that hypothiocyanate is likely to contribute to leukocyte antimicrobial activity.

Redox properties of the couple compound I/native enzyme of myeloperoxidase and eosinophil peroxidase.

The standard reduction potential of the redox couple compound I/native enzyme has been determined for human myeloperoxidase (MPO) and eosinophil peroxidase (EPO) at pH 7.0 and 25 degrees C. This was achieved by rapid mixing of peroxidases with either hydrogen peroxide or hypochlorous acid and measuring spectrophotometrically concentrations of the reacting species and products at equilibrium. By using hydrogen peroxide, the standard reduction potential at pH 7.0 and 25 degrees C was 1.16 +/- 0.01 V for MPO and 1.10 +/- 0.01 V for EPO, independently of the concentration of hydrogen peroxide and peroxidases. In the case of hypochlorous acid, standard reduction potentials were dependent on the hypochlorous acid concentration used. They ranged from 1.16 V at low hypochlorous acid to 1.09 V at higher hypochlorous acid for MPO and from 1.10 V to 1.03 V for EPO. Thus, consistent results for the standard reduction potentials of redox couple compound I/native enzyme of both peroxidases were obtained with all hydrogen peroxide and at low hypochlorous acid concentrations: possible reasons for the deviation at higher concentrations of hypochlorous acid are discussed. They include instability of hypochlorous acid, reactions of hypochlorous acid with different amino-acid side chains in peroxidases as well as the appearance of a compound I-chloride complex.