Nypa fruticans Frond Waste for Pure Cellulose Utilizing Sulphur-Free and Totally Chlorine-Free Processes.

The search for alternative methods for the production of new materials or fuel from renewable and sustainable biomass feedstocks has gained increasing attention. In this study, Nypa fruticans (nipa palm) fronds from agricultural residues were evaluated to produce pure cellulose by combining prehydrolysis for 1-3 h at 150 °C, sulfur-free soda cooking for 1-1.5 h at 160 °C with 13-25% active alkali (AA), 0.1% soluble anthraquinone (SAQ) catalyst, and three-stage totally chlorine-free (TCF) bleaching, namely oxygen, peroxymonosulfuric acid, and alkaline hydrogen peroxide stages. The optimal conditions were 3 h prehydrolysis and 1.5 h cooking with 20% AA. Soda cooking with SAQ was better than the kraft and soda process without SAQ. The method decreased the kappa number as a residual lignin content index of pulp from 13.4 to 9.9-10.2 and improved the yields by approximately 6%. The TCF bleaching application produced pure cellulose with a brightness of 92.2% ISO, 94.8% α-cellulose, viscosity of 7.9 cP, and 0.2% ash content. These findings show that nipa palm fronds can be used to produce pure cellulose, serving as a dissolving pulp grade for viscose rayon and cellulose derivatives.

Mutagenicity of Tectona grandis Wood Extracts and Their Ability to Improve Carbohydrate Yield for Kraft Cooking Eucalyptus Wood.

Considering the toxicity of the impurities of synthesized anthraquinone, this study clarified new catalytic compounds for kraft cooking with improved carbohydrate yield and delignification and less mutagenicity, which are important for ensuring the safety of paper products in contact with food. The 2-methylanthraquinone contents of teak (Tectona grandis) woods were 0.18-0.21%. Acetone extracts containing 2-methylanthraquinone from Myanmar and Indonesia teak woods as additives improved lignin removal during kraft cooking of eucalyptus wood, which resulted in kappa numbers that were 2.2-6.0 points lower than the absence of additive. Myanmar extracts and 2-methylanthraquinone improved carbohydrate yield in pulps with 1.7-2.2% yield gains. Indonesia extracts contained more deoxylapachol and its isomer than 2-methylanthraquinone. The residual content of 2-methylanthraquinone in the kraft pulp was trace. Although Ames tests showed that the Indonesia and Myanmar extracts were mutagenic to Salmonella typhimurium, 2-methylanthraquinone was not. The kraft pulp obtained with the additives should be safe for food-packaging applications, and the addition of 0.03% 2-methylanthraquinone to kraft cooking saves forest resources and fossil energy in industries requiring increased pulp yield.

Association of frontal plane knee alignment with foot posture in patients with medial knee osteoarthritis.

BACKGROUND: To examine the association of radiographic frontal plane knee alignment with three-dimensional foot posture in patients with medial knee osteoarthritis (OA). METHODS: Participants in orthopedic clinics with Kellgren/Lawrence (K/L) grade ≥1 (88 patients and 88 knees; age, 61-91 years; 65.9% female) were enrolled. An anteroposterior radiographic view was used to assess the anatomical axis angle (AAA) after subtracting a sex-specific correction factor. The three-dimensional foot posture was also evaluated. RESULTS: Multiple regression analyses showed that increased corrected AAA (i.e., valgus direction) was independently associated with a decrease in the hallux valgus angle (regression coefficient: -0.40 per degree, 95% confidence interval [CI]: -0.72, -0.09; P = 0.013) and increase in the pronation angle of the calcaneus relative to floor (regression coefficient: 0.33 per degree, 95% CI: 0.10, 0.56; P = 0.005) adjusted for age, sex, and body mass index. The relationship between the corrected AAA and hallux valgus angle strengthened (regression coefficient: -0.60 per degree, 95% CI: -1.08, -0.13; P = 0.014) in varus-aligned knees examined separately (63 knees). The other foot postures (navicular height, navicular height/foot length, and rearfoot angle) were not significantly associated with corrected AAA. CONCLUSIONS: Radiographic frontal plane knee alignment was associated with hallux valgus angle and calcaneus angle relative to the floor in patients with medial knee OA, particularly in varus-aligned knees. These results indicate a connection between altered frontal knee alignment and foot posture, which may be helpful in understanding the pathogenesis of altered foot posture observed in patients with knee OA.

Inverted Rearfoot posture in subjects with coexisting patellofemoral osteoarthritis in medial knee osteoarthritis: an exploratory study.

BACKGROUND: While abnormal rearfoot posture and its relationship to patellofemoral (PF) pain has been thoroughly discussed in the literature, its relationship to patellofemoral osteoarthritis (PFOA) has not been determined. This study aimed to examine whether rearfoot posture is associated with a higher prevalence of radiographic PFOA in a compartment-specific manner in patients with medial tibiofemoral osteoarthritis (TFOA). METHODS: Participants from orthopedic clinics (n = 68, age 56-90 years, 75.0% female), diagnosed with radiographic medial TFOA (Kellgren/Lawrence [K/L] grade ≥ 2) were included in this study. The presence of PFOA and static rearfoot posture were evaluated using a radiographic skyline view and a footprint automatic measurement apparatus, respectively. The relationship between rearfoot posture and PFOA was examined using analysis of covariance and propensity score-adjusted logistic regression analysis. RESULTS: On average, patients with coexisting PFOA and medial TFOA (n = 39) had an inverted calcaneus 3.1° greater than those with isolated medial TFOA (n = 29). Increased calcaneus inverted angle was significantly associated with a higher probability of the presence of medial PFOA (odds ratio: 1.180, 95% confidence interval: [1.005, 1.439]; p = 0.043). Calcaneus inverted angle was not associated with higher odds of lateral PFOA presence based on the adjusted values. CONCLUSIONS: The presence of an inverted rearfoot was associated with PFOA. Although these findings do not clearly indicate a biomechanical link between rearfoot posture and PFOA, this study shed light on the potential relationship between altered rearfoot posture and PFOA, as can be seen between rearfoot abnormality and PF pain.

Varus thrust visualized during gait was associated with inverted foot in patients with knee osteoarthritis: An exploratory study.

The foot is speculated to play a role in knee joint kinematics. This exploratory cross-sectional study examined the association between static foot posture and the presence of varus thrust visualized during gait in patients with medial knee osteoarthritis (OA). Patients (n = 88 patients and 134 knees; age, 61-91 years; 68.2% female) with Kellgren/Lawrence (K/L) grade ≥1 in the medial compartment were included in this study and underwent gait observation for varus thrust. These patients' three-dimensional static foot posture while standing was evaluated and their tibiofemoral joint K/L grades and anatomical axis angles were also assessed as covariates. Knees with varus thrust (22 knees, 16.4%) on average had a 4° more inverted calcaneus relative to the floor than those without varus thrust (P < 0.001). A logistic regression analysis showed that an increased calcaneus inversion angle was significantly associated with higher odds of the presence of varus thrust with adjustments for age, sex, body mass index, K/L grade, and anatomical axis angle. The other predictors, such as navicular height, navicular height/foot length, and rearfoot angle relative to the lower leg, were not significantly associated with varus thrust. These results suggest that patients with varus thrust had a different static rearfoot posture as compared with those without varus thrust, a finding that may indicate an important role of static rearfoot posture in the pathogenesis of varus thrust. Furthermore, investigating the potential influence of foot posture on the efficacy of biomechanical interventions, such as lateral wedge insole use, on varus thrust would be of particular interest in the further studies.

Association of bilateral flat feet with knee pain and disability in patients with knee osteoarthritis: A cross-sectional study.

This cross-sectional study examined the relationship of flat feet with knee pain, disability, and physical performance in patients with knee osteoarthritis (OA). Orthopedic clinic participants (n = 95; age 61-91 years; 68.4% women) with Kellgren-Lawrence (K/L) grade ≥1 in the medial compartment underwent evaluation of navicular height and foot length for flat feet. Knee pain intensity, disability, and physical performance were evaluated using the Japanese Knee Osteoarthritis Measure, 10-m walk, timed up and go, and five-repetition chair stand tests. Of the 95 enrolled patients, 24 (25.3%) had bilateral flat feet, and significantly higher knee pain compared to patients with no flat feet (11.3 ± 8.23 points vs. 6.58 ± 6.37 points; p = 0.043). A ordinal logistic regression analysis showed that bilateral flat feet were significantly associated with increased knee pain (proportional odds ratio: 5.48, 95% confidence interval: 1.96, 15.3; p = 0.001) compared with no flat feet, adjusted for age, sex, body mass index, and tibiofemoral joint K/L grade, which is consistent across various different cutoffs of the definition of flat feet. Physical performance was similar between patients with and without bilateral flat feet. The presence of unilateral flat feet was not significantly associated with any outcome measures. These findings indicate that bilateral, but not unilateral, flat feet are associated with worse knee pain. A prospective study investigating a causal relationship between bilateral flat feet posture and knee pain as well as disability would be of particular interest to verify the potential adverse effect of altered foot posture. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 35:2490-2498, 2017.

Quality evaluation of dissolving pulp fabricated from banana plant stem and its potential for biorefinery.

The study was conducted to evaluate the quality of dissolving pulp of Musa sapientum L. (banana) plant stem and its potential for biorefinery. Introduction of pre-hydrolysis prior to any alkaline pulping process helps to reduce the content of hemicellulose and consequently produce acceptably high content of cellulose pulp. Water pre-hydrolysis was done at 150°C for 90min. The amount of lignin, xylan and glucan in the extracted pre-hydrolysis liquor (PHL) was 1.6, 4.9 and 1.6%, respectively. Pulping of pre-extracted chips was done following soda-AQ, alkaline sulfite and kraft process. The ratio of chip to liquor was 1:7 for both pre-hydrolysis and pulping. The kraft pulping process with 20% active alkali and 25% sulfidity at 150°C for 90min showed the best result. The lowest kappa number was 26.2 with a considerable pulp yield of 32.7%. The pulp was bleached by acidic NaClO2 and the consistency was 10% based on air-dried pulp. The lowest amount of 7% NaClO2 was used for the bleaching sequence of D0ED1ED2. After D0ED1ED2 bleaching, the pulp showed that α-cellulose, brightness and ash were 91.9, 77.9 and 1.6% respectively. The viscosity was 19.9cP. Hence, there is a possibility to use banana plant stem as a raw material for dissolving grade pulp and other bioproducts.

Toxicity and Feeding Deterrent Effect of 2-Methylanthraquinone from the Wood Extractives of Tectona grandis on the Subterranean Termites Coptotermes formosanus and Reticulitermes speratus.

No-choice feeding tests using ethanol, chloroform, and acetone extractives of teak (Tectona grandis) heartwood clearly showed feeding deterrent activity and toxicity to the subterranean termite Reticulitermes speratus. The amount of 2-methylanthraquinone (MAQ) in teak wood extractives was not related to the feeding deterrents or toxicity, as shown by the no-choice feeding tests conducted using crude extractives containing various amounts of MAQ, MAQ alone, and fractions of crude extractives. As a native pest, the subterranean termite Coptotermes formosanus was more tolerant to the fractions of crude extractives than Reticulitermes speratus, and the mortality observed in C. formosanus was not due to the presence of MAQ.

The GH67 α-glucuronidase of Paenibacillus curdlanolyticus B-6 removes hexenuronic acid groups and facilitates biodegradation of the model xylooligosaccharide hexenuronosyl xylotriose.

4-O-Methylglucuronic acid (MeGlcA) side groups attached to the xylan backbone through α-1,2 linkages are converted to hexenuronic acid (HexA) during alkaline pulping. α-Glucuronidase (EC 3.2.1.139) hydrolyzes 1,2-linked MeGlcA from xylooligosaccharides. To determine whether α-glucuronidase can also hydrolyze HexA-decorated xylooligosaccharides, a gene encoding α-glucuronidase (AguA) was cloned from Paenibacillus curdlanolyticus B-6. The purified protein degraded hexenuronosyl xylotriose (ΔX3), a model substrate prepared from kraft pulp. AguA released xylotriose and HexA from ΔX3, but the Vmax and kcat values for ΔX3 were lower than those for MeGlcA, indicating that HexA side groups may affect the hydrolytic activity. To explore the potential for biological bleaching, ΔX3 degradation was performed using intracellular extract from P. curdlanolyticus B-6. The intracellular extract, with synergistic α-glucuronidase and ß-xylosidase activities, degraded ΔX3 to xylose and HexA. These results indicate that α-glucuronidase can be used to remove HexA from ΔX3 derived from pulp, reducing the need for chemical treatments in the pulping process.