Negative Thermal Expansion in Fluoroapatite Pb5(VO4)3F Enhanced by the Steric Effect of Pb2.

Negative thermal expansion (NTE) is an unusual thermophysical phenomenon and has gained attention as a way of controlling thermal expansion. Here, we report a substantial NTE in fluoroapatite Pb5(VO4)3F in a limited temperature range. The dilatometric study revealed volume shrinkage below 150 K, giving a linear thermal expansion coefficient of αL = -44 ppm/K in the temperature range from 140 to 120 K upon heating. The NTE behavior is associated with a structural transition from the hexagonal (P63/m) phase to the monoclinic (P21/b) phase. Such a structural transition has been found in other apatite-type compounds, but the magnitude of the volume change in Pb5(VO4)3F is remarkable. Our structural analysis revealed that the structural transition is classified as an antiferroelectric-to-paraelectric transition and the volume change during the transition is enhanced by the steric effect of 6s2 lone-pair electrons of Pb2+.

Catalytic Asymmetric Total Synthesis of Exiguolide.

The catalytic asymmetric total synthesis of (-)-exiguolide, a complex 20-membered macrolide embedded with a bis(tetrahydropyran) motif, is reported. The convergent synthesis involves the construction of the C1-C11 tetrahydropyran segment via catalytic asymmetric allylation and Prins cyclization, and the formation of the C12-C21 phosphonate segment via catalytic asymmetric cyclocondensation reaction and Johnson-Claisen rearrangement. The synthesis of 15-epi-exiguolide is also described.

Solar-Driven Photoelectrochemical Water Oxidation over an n-Type Lead-Titanium Oxyfluoride Anode.

Mixed-anion compounds (e.g., oxynitrides and oxysulfides) are potential candidates as photoanodes for visible-light water oxidation, but most of them suffer from oxidative degradation by photogenerated holes, leading to low stability. Here we show an exceptional example of a stable, mixed-anion water-oxidation photoanode that consists of an oxyfluoride, Pb2Ti2O5.4F1.2, having a band gap of ca. 2.4 eV. Pb2Ti2O5.4F1.2 particles, which were coated on a transparent conductive glass (FTO) support and were subject to postdeposition of a TiO2 overlayer, generated an anodic photocurrent upon band gap photoexcitation of Pb2Ti2O5.4F1.2 (λ <520 nm) with a rather negative photocurrent onset potential of ca. -0.6 V vs NHE, which was independent of the pH of the electrolyte solution. Stable photoanodic current was observed even without loading a water oxidation promoter such as CoOx. Nevertheless, loading CoOx onto the TiO2/Pb2Ti2O5.4F1.2/FTO electrode further improved the anodic photoresponse by a factor of 2-3. Under AM1.5G simulated sunlight (100 mW cm-2), stable water oxidation to form O2 was achieved using the optimized Pb2Ti2O5.4F1.2 photoanode in the presence of an applied potential smaller than 1.23 V, giving a Faradaic efficiency of 93% and almost no sign of deactivation during 4 h of operation. This study presents the first example of photoelectrochemical water splitting driven by visible-light excitation of an oxyfluoride that stably works, even without a water oxidation promoter, which is distinct from ordinary mixed-anion photoanodes that usually require a water oxidation promoter.

Enhanced Negative Thermal Expansion Induced by Simultaneous Charge Transfer and Polar-Nonpolar Transitions.

Negative thermal expansion (NTE) induced by simultaneous mechanisms, that is, charge transfer and polar-nonpolar transitions, was observed for the first time in BiNi1-xFexO3 (0.25 ≤ x ≤ 0.5). The low-temperature phase was found to have a polar structure (space group of R3c) with a Bi3+0.5(1+x)Bi5+0.5(1-x)Ni2+1-xFe3+xO3 charge distribution and short-range ordering of Bi3+ and Bi5+. The volume reduction upon heating that was induced by charge transfer between Bi5+ and Ni2+ decreased with increasing x because of the reduction in the amount of Ni2+. Simultaneous polar-nonpolar transition also contributed to NTE, and a composition-independent enhanced volume reduction of ∼2% was observed.

A Stable, Narrow-Gap Oxyfluoride Photocatalyst for Visible-Light Hydrogen Evolution and Carbon Dioxide Reduction.

Mixed anion compounds such as oxynitrides and oxychalcogenides are recognized as potential candidates of visible-light-driven photocatalysts since, as compared with oxygen 2p orbitals, p orbitals of less electronegative anion (e.g., N3-, S2-) can form a valence band that has more negative potential. In this regard, oxyfluorides appear unsuitable because of the higher electronegativity of fluorine. Here we show an exceptional case, an anion-ordered pyrochlore oxyfluoride Pb2Ti2O5.4F1.2 that has a small band gap (ca. 2.4 eV). With suitable modification of Pb2Ti2O5.4F1.2 by promoters such as platinum nanoparticles and a binuclear ruthenium(II) complex, Pb2Ti2O5.4F1.2 worked as a stable photocatalyst for visible-light-driven H2 evolution and CO2 reduction. Density functional theory calculations have revealed that the unprecedented visible-light-response of Pb2Ti2O5.4F1.2 arises from strong interaction between Pb-6s and O-2p orbitals, which is enabled by a short Pb-O bond in the pyrochlore lattice due to the fluorine substitution.

Synthesis, Crystal Structure, and Optical Properties of Layered Perovskite Scandium Oxychlorides: Sr2ScO3Cl, Sr3Sc2O5Cl2, and Ba3Sc2O5Cl2.

We report the successful synthesis of three new Ruddlesden-Popper-type scandium oxychloride perovskites, Sr2ScO3Cl, Sr3Sc2O5Cl2, and Ba3Sc2O5Cl2, by conventional solid-state reaction. Small single crystals of Sr2ScO3Cl were obtained by a self-flux method, and the crystal structure was determined to belong to the tetragonal P4/ nmm space group ( a = 4.08066(14) Å, c = 14.1115(8) Å) by X-ray diffraction analysis. The scandium center forms a ScO5Cl octahedron with ordered apical oxygen and chlorine anions. The scandium cation, however, is shifted from the position of the octahedral center toward the apical oxygen anion, such that the coordination geometry of the Sc cation can be effectively viewed as an ScO5 pyramid. These structural features in the oxychloride are different from those of octahedral ScO5F coordinated with a partial O/F anion order at the apical sites in the oxyfluoride Sr2ScO3F. Rietveld refinements of the neutron powder diffraction data of Sr3Sc2O5Cl2 ( I4/ mmm: a = 4.107982(5) Å, c = 23.58454(7) Å) and Ba3Sc2O5Cl2 ( I4/ mmm: a = 4.206920(5) Å, c = 24.54386(6) Å) reveal the presence of pseudo ScO5 pyramids with the Cl anion being distant from the scandium cation, which is similar to the Sc-centered coordination geometry in Sr2ScO3Cl with the exception that the ScO5 pyramids form double layers by sharing the apical oxygen. Density functional calculations on Sr2ScO3Cl indicate the strong covalency of the Sc-O bonds but almost nonbonding interaction between Sc and Cl ions.

A-Site and B-Site Charge Orderings in an s-d Level Controlled Perovskite Oxide PbCoO3.

Perovskite PbCoO3 synthesized at 12 GPa was found to have an unusual charge distribution of Pb2+Pb4+3Co2+2Co3+2O12 with charge orderings in both the A and B sites of perovskite ABO3. Comprehensive studies using density functional theory (DFT) calculation, electron diffraction (ED), synchrotron X-ray diffraction (SXRD), neutron powder diffraction (NPD), hard X-ray photoemission spectroscopy (HAXPES), soft X-ray absorption spectroscopy (XAS), and measurements of specific heat as well as magnetic and electrical properties provide evidence of lead ion and cobalt ion charge ordering leading to Pb2+Pb4+3Co2+2Co3+2O12 quadruple perovskite structure. It is shown that the average valence distribution of Pb3.5+Co2.5+O3 between Pb3+Cr3+O3 and Pb4+Ni2+O3 can be stabilized by tuning the energy levels of Pb 6s and transition metal 3d orbitals.

Hydrothermal Synthesis, Structure, and Superconductivity of Simple Cubic Perovskite (Ba0.62K0.38)(Bi0.92Mg0.08)O3 with Tc ∼ 30 K.

We have synthesized a new superconducting perovskite bismuth oxide by a facile hydrothermal route at 220 °C. The choice of starting materials, their mixing ratios, and the hydrothermal reaction temperature was crucial for obtaining products with superior superconducting properties. The structure of the powder sample was investigated using laboratory X-ray diffraction, high-resolution synchrotron X-ray diffraction (SXRD) data, and electron diffraction (ED) patterns [transmission electron microscopy (TEM) analysis]. The refinement of SXRD data confirmed a simple perovskite-type structure with a cubic cell of a = 4.27864(2) Å [space group Pm3̅m (No. 221)]. Elemental analysis detected magnesium in the final products, and a refinement based on SXRD and inductively coupled plasma data yielded an ideal undistorted simple cubic perovskite-type structure, with the chemical composition (Ba0.62K0.38)(Bi0.92Mg0.08)O3. ED patterns also confirmed the simple cubic perovskite structure; the cube-shaped microstructures and compositional homogeneity on the nanoscale were verified by scanning electron microscopy and TEM analyses, respectively. The fabricated compound exhibited a large shielding volume fraction of about 98% with a maximum Tcmag of ∼30 K, which was supported by the measured bismuth valence as well. Its electrical resistivity dropped at ∼21 K, and zero resistivity was observed below 7 K. The compound underwent thermal decomposition above 400 °C. Finally, the calculated band structure showed a metallic behavior for this hydrothermally synthesized bismuth oxide.

Oral administration of Japanese sake yeast (Saccharomyces cerevisiae sake) promotes non-rapid eye movement sleep in mice via adenosine A2A receptors.

We have demonstrated previously that Japanese sake yeast improves sleep quality in humans. In the present study, we examined the molecular mechanisms of sake yeast to induce sleep by monitoring locomotor activity, electromyogram and electroencephalogram in mice. Oral administration of Japanese sake yeast (100, 200, and 300 mg kg-1 ) decreased the locomotor activity by 18, 46 and 59% and increased the amount of non-rapid eye movement (NREM) sleep by 1.5-, 2.3- and 2.4-fold (to 37 ± 6, 57 ± 8, and 60 ± 4 min from 25 ± 6 min in the vehicle-administered group, respectively) in a dose-dependent manner for 4 h after oral administration. However, Japanese sake yeast did not change the amount of rapid eye movement (REM) sleep, the electroencephalogram power density during NREM sleep or show any adverse effects, such as rebound of insomnia, during 24 h postadministration and on the next day. An intraperitoneal pretreatment with an adenosine A2A receptor-selective antagonist, ZM241385 (15 mg kg-1 ), reduced the amount of NREM sleep of sake yeast-administered mice to the basal level, without changing basal amount of sleep. Conversely, an A1 receptor-selective antagonist, 8-cyclopentyltheophylline (10 mg kg-1 ), did not affect the sleep-promoting effect of Japanese sake yeast. Thus, Japanese sake yeast promotes NREM sleep via activation of adenosine A2A but not A1 receptors.

Japanese sake yeast supplementation improves the quality of sleep: a double-blind randomised controlled clinical trial.

Activation of adenosine A2a receptors in cerebral neurons induces sleep in various mammals. It was previously found that Japanese sake yeast enriched in adenosine analogues activates A2a receptors in vitro and induces sleep in mice. Here it is reported that sake yeast activated A2a receptors in a cultured human cell line and improved human sleep quality in a clinical trial. Sake yeast activated A2a receptors in HEK cells in a dose-dependent manner with an EC50 of 40 µg mL(-1), and the activation was attenuated almost completely by the A2a receptor antagonist ZM241385 with an IC50 of 73 nm. In a double-blind placebo-controlled crossover clinical study, 68 healthy participants ingested tablets containing either 500 mg of sake yeast powder or a placebo (cellulose) 1 h before sleep for 4 days. Electroencephalograms were recorded during sleep at home with a portable device for 4 week days. Electroencephalogram analyses revealed that sake yeast supplementation significantly (P = 0.03) increased delta power during the first cycle of slow-wave sleep by 110%, without changing other sleep parameters. Sake yeast supplementation also significantly increased growth hormone secretion in the urine on awakening by 137% from 3.17 ± 0.41 (placebo) to 4.33 ± 0.62 (sake yeast) pg mg(-1) creatinine (P = 0.03). Subjective sleepiness (P = 0.02) and fatigue (P = 0.06) in the morning were improved by sake yeast. Given these benefits and the absence of adverse effects during the study period, it was concluded that sake yeast supplementation is an effective and safe way to support daily high-quality, deep sleep.

High-Temperature Monoclinic Cc Phase with Reduced c/a Ratio in Bi-based Perovskite Compound Bi2ZnTi1-xMnxO6.

Monoclinic phases with Cm, Pm, and Cc space groups are indispensable to understand the high performance of electromechanical properties at the morphotropic phase boundary (MPB) of lead-based perovskite oxides Pb(ZrxTi1-x)O3 (PZT), [Pb(Mg1/3Nb2/3)O3]1-x-(PbTiO3)x (PMN-PT), and [Pb(Zn1/3Nb2/3)O3]1-x-(PbTiO3)x (PZN-PT). Here, a nearly single monoclinic phase with space group Cc was observed in the Bi-based lead-free perovskite compound Bi2ZnTi1-xMnxO6 at x = 0.4. This phase was the same as the low-temperature phase of the MPB composition of PZT but existed at a much higher temperature. Despite the reduced pseudo c/a ratio of 1.065, which is the same as that of PbTiO3 at room temperature, ionic model calculation based on the Rietveld refinement data indicated the polarization of Bi2ZnTi0.6Mn0.4O6 is 95.8 µC/cm(2). The tilting and significant anisotropic distortion of the octahedron were found to cause the c/a ratio to reduce. Accordingly, the effective piezoelectric constant d33 of Bi2ZnTi0.6Mn0.4O6 thin film was found to be 12 pm/V.

High-Pressure Polymorph of NaBiO3.

A new high-pressure polymorph of NaBiO3 (hereafter ß-NaBiO3) was synthesized under the conditions of 6 GPa and 600 °C. The powder X-ray diffraction pattern of this new phase was indexed with a hexagonal cell of a = 9.968(1) Å and c = 3.2933(4) Å. Crystal structure refinement using synchrotron powder X-ray diffraction data led to RWP = 8.53% and RP = 5.55%, and the crystal structure was closely related with that of Ba2SrY6O12. No photocatalytic activity for phenol decomposition was observed under visible-light irradiation in spite of a good performance for its mother compound, NaBiO3. The optical band-gap energy of ß-NaBiO3 was narrower than that of NaBiO3, which was confirmed with density of states curves simulated by first-principles density functional theory calculation.

Melting of Pb Charge Glass and Simultaneous Pb-Cr Charge Transfer in PbCrO3 as the Origin of Volume Collapse.

A metal to insulator transition in integer or half integer charge systems can be regarded as crystallization of charges. The insulating state tends to have a glassy nature when randomness or geometrical frustration exists. We report that the charge glass state is realized in a perovskite compound PbCrO3, which has been known for almost 50 years, without any obvious inhomogeneity or triangular arrangement in the charge system. PbCrO3 has a valence state of Pb(2+)(0.5)Pb(4+)(0.5)Cr(3+)O3 with Pb(2+)-Pb(4+) correlation length of three lattice-spacings at ambient condition. A pressure induced melting of charge glass and simultaneous Pb-Cr charge transfer causes an insulator to metal transition and ∼10% volume collapse.

Observation of Anion Order in Pb2Ti4O9F2.

The observation of anion order is indispensable for the investigation of oxyfluorides. However, the negligible contrast between O(2-) and F(-) in both X-ray and neutron diffraction obscures the distinct anion sites for Rietveld refinement. Therefore, the difference in the chemical bonding of M-O(2-) and M-F(-) is the key to determining anion order. In this study, bond-valence-sum calculations and determination of the electron density distribution by the maximum entropy method illustrated anion order in the newly synthesized oxyfluoride Pb2Ti4O9F2. These results demonstrate a promising method to determine anion order in mixed anion systems.

Negative thermal expansion induced by intermetallic charge transfer.

Suppression of thermal expansion is of great importance for industry. Negative thermal expansion (NTE) materials which shrink on heating and expand on cooling are therefore attracting keen attention. Here we provide a brief overview of NTE induced by intermetallic charge transfer in A-site ordered double perovskites SaCu3Fe4O12 and LaCu3Fe4-x Mn x O12, as well as in Bi or Ni substituted BiNiO3. The last compound shows a colossal dilatometric linear thermal expansion coefficient exceeding -70 × 10-6 K-1 near room temperature, in the temperature range which can be controlled by substitution.

Superconducting double perovskite bismuth oxide prepared by a low-temperature hydrothermal reaction.

Perovskite-type structures (ABO3) have received significant attention because of their crystallographic aspects and physical properties, but there has been no clear evidence of a superconductor with a double-perovskite-type structure, whose different elements occupy A and/or B sites in ordered ways. In this report, hydrothermal synthesis at 220 °C produced a new superconductor with an A-site-ordered double perovskite structure, (Na(0.25)K(0.45))(Ba(1.00))3(Bi(1.00))4O12, with a maximum T(c) of about 27 K.

Efficacy of hard gummy candy chewing in improving masticatory function in Japanese children aged 6-12 years: a clinical trial.

OBJECTIVES: Japanese children have been shown to exhibit decreased masticatory function; however, limited evidence is available regarding the efficacy of certain food items in improving this issue. Therefore, this study examined the effects of chewing hard gummy candy on the masticatory function of Japanese children aged 6-12 years. METHODS: The study included 26 participants (10 boys and 16 girls; mean age ± standard error = 9.3 ± 0.3 years) who were asked to chew hard gummy candy twice daily for 4 weeks at home. The lip-closing force, occlusal force, and masticatory performance of the participants were recorded before commencement (T1), 4 weeks after commencement (T2), and 4 weeks after completion (T3) of the training. Statistical analyses were performed using the Wilcoxon rank-sum test or the Wilcoxon signed-rank test with Bonferroni correction. RESULTS: No correlation was observed between masticatory function and sex at T1. The lip-closing and right occlusal forces increased significantly after 4 weeks of exercise, and the effects persisted for another 4 weeks after completion. The masticatory performance also improved after training, although these effects did not persist and deteriorated substantially 4 weeks after completion of the training. CONCLUSIONS: Habitual mastication training using hard gummy candy markedly enhances masticatory function (e.g., lip-closing force, occlusal force, and masticatory performance) in Japanese children.

Spin frustration from cis-edge or -corner sharing metal-centered octahedra.

A new strategy using cis-edge or -corner sharing metal-centered octahedra is described which enables interesting frustrated spin lattices to be targeted. The examination of "CuV2" triangular motifs in the two new compounds [enH2]Cu(H2O)2[V2O2F8] (1) and [Cu(H2O)(2,2'-bpy)]2[V2O2F8] (2) (where enH2 = ethylenediammonium and 2,2'-bpy =2,2'-bipyridyl) reveals that the [VOF4](2-) anions, which exhibit cis structure directing properties, lead to frustrated lattices owing to the competing ferro and antiferromagnetic interactions. There is direct coordination through two cis F(-) ligands (i.e., the F(-) ligand trans to O(2-) and one equatorial F(-) ligand) in both 1 and 2 owing to the significant π-bonding between the vanadium and the oxide ligand. We emphasize that most of triangular motifs reported in the literature are built of cis-edge or -corner sharing metal-centered octahedra, thus they can be used to target new materials exhibiting interesting magnetism such as spin frustration.

Structure and magnetic properties of BiFe(1-x)Co(x)O3 and Bi0.9Sm0.1Fe(1-x)Co(x)O3.

BiFe(1-x)Co(x)O3 and Bi0.9Sm0.1Fe(1-x)Co(x)O3 were synthesized under a high pressure of 4 GPa; 10% Sm substitution for Bi in BiFe(1-x)Co(x)O3 (x ≤ 0.20) drastically destabilized the ferroelectric BiFeO3-type structure and changed it to an antiferroelectric PbZrO3-type superstructure. In comparison, a ferroelectric BiCoO3-type tetragonal structure (x ≥ 0.40) was insensitive to the Sm substitution. No decrease in the ferroelectric Curie temperature (TC) was observed. Weak ferromagnetism with a spontaneous moment of 0.025 µB/formula unit (f.u.) was observed for BiFe(1-x)Co(x)O3 (x = 0.10 and 0.20) samples, suggesting the change in the spin structure from a cycloidal one. Because of the coexistence of ferroelectricity and ferromagnetism at room temperature, this compound is a promising multiferroic material.

Crystal and magnetic structure in co-substituted BiFeO3.

Ultra-high-resolution neutron diffraction studies of BiFe(0.8)Co(0.2)O3 show a transition from a cycloidal space modulated spin structure at T = 10 K to a collinear G-type antiferromagnetic structure at T = 120 K. The model of antiparallel directions of Fe(3+) and Co(3+) magnetic moments at the shared Wyckoff position describes well the observed neutron diffraction intensities. On heating above RT, the crystal structure of BiFe(0.8)Co(0.2)O3 changes from a rhombohedral R3c to a monoclinic Cm. At 573 K only the Cm phase is present. The collinear C-type antiferromagnetic structure is present in the Cm phase of BiFe(0.8)Co(0.2)O3 at RT after annealing.