RESUMO
Improved hygiene depends on the accessibility and availability of effective disinfectant solutions. These disinfectant solutions are unavailable to many communities worldwide due to resource limitations, among other constraints. Safe and effective chlorine-based disinfectants can be produced via simple electrolysis of salt water, providing a low-cost and reliable option for on-site, local production of disinfectant solutions to improve sanitation and hygiene. This study reports on a system (herein called "Electro-Clean") that can produce concentrated solutions of hypochlorous acid (HOCl) using readily available, low-cost materials. With just table salt, water, graphite welding rods, and a DC power supply, the Electro-Clean system can safely produce HOCl solutions (~1.5 liters) of up to 0.1% free chlorine (i.e.,1000 ppm) in less than two hours at low potential (5 V DC) and modest current (~5 A). Rigorous testing of free chlorine production and durability of the Electro-Clean system components, described here, has been verified to work in multiple locations around the world, including microbiological tests conducted in India and Mexico to confirm the biocidal efficacy of the Electro-Clean solution as a surface disinfectant. Cost estimates are provided for making HOCl locally with this method in the USA, India, and Mexico. Findings indicate that Electro-Clean is an affordable alternative to off-the-shelf commercial chlorinator systems in terms of first costs (or capital costs), and cost-competitive relative to the unit cost of the disinfectant produced. By minimizing dependence on supply chains and allowing for local production, the Electro-Clean system has the potential to improve public health by addressing the need for disinfectant solutions in resource-constrained communities.
RESUMO
Bank erosion is an important source of sediment and phosphorus to inland fluvial systems and is generally responsible for more than half of the total watershed sediment export. Numerous studies have quantified bank erosion and the spatio-temporal variation of sediment flux in different watersheds. However, there is sparse research to date on the linkages between bank erosion/accretion and sediment export under different land uses, especially in rapidly evolving peri-urban watersheds. This research, therefore, integrated remote sensing techniques and repeated field survey of erosion pin plots to quantify bank erosion and sediment flux in the 80 km2 Nkisi River watershed (NRW), southeast Nigeria, over a three-year period. The impact of land use change on streambank erosion was evaluated by utilising remotely sensed Landsat datasets of 2003, 2010, 2016 and 2019. Geotechnical tests were used to characterise the lithologic properties of the banks, while the Bank Stability and Toe Erosion Model (BSTEM) was used to determine the stability of the banks under various hydrological conditions and mechanical properties of the riparian vegetation. Mean bank recession rates increased from 10.7 cm during the 2017-2018 monitoring period to 17.5 cm for the 2019-2020 monitoring period. The percentage of total watershed export ascribed to bank erosion in the three stream reaches varied from 6.6 to 44.9%. The high rates of bank erosion and accretion within the NRW were attributed to rapid changes in land use, which evolved from grassland and woodland to cropland, built-up and bare land. The BSTEM accurately predicted the high erosion rates of the streambanks and showed that riparian vegetation has a mechanical effect on bank stability. However, the mechanical effect diminishes as the depth to water table rises during high streamflow events.
Assuntos
Monitoramento Ambiental , Rios , Monitoramento Ambiental/métodos , Florestas , Nigéria , Fósforo/análiseRESUMO
Wastewater reuse has become an integral part of Integrated Water Resources Management and thus plays a role in securing the water needs for future generations. This study aimed at determining the perceptions of Canaanland, an emerging urban community in Ogun State, Nigeria, on treated wastewater reuse for several purposes. Data were collected through questionnaires administered to the city residents (n = 244). Findings revealed that the city was aware of the economic and environmental benefits of wastewater reuse but would prefer reuse schemes that involved less human contact such as flushing toilets, electricity generation, building construction, and car wash. The least preferred option was for potable purposes. The community also revealed that they would be willing to accept wastewater reuse as long as it is endorsed by medical doctors, university professors, and experts. However, 45.5% of the respondents were from the Covenant University academic environment. Also, an assessment was carried out to ascertain the implications and opportunities for wastewater reuse in the city. Findings indicated that wastewater reuse involves several complexities and interlinkages, which revolve around political and decisional factors, economic and social factors, environmental factors, and technological factors. From the study, policy and decisional suggestions and a wastewater process flow were developed for more efficient wastewater management within developing cities. A study was carried out on eight cities from developing nations that have created a framework for wastewater management using several approaches. Also, a summary of findings reveals that if adequately researched, cheap and alternative means of wastewater treatment and reuse could be developed for electricity generation, carwash, and firefighting for developing nations. The result of this research can be used to address public anxieties regarding wastewater-reuse practices. Additionally, this study hopes to aid successful wastewater management schemes in the foreseeable future.
RESUMO
River sediments contain environmental fingerprints that provide useful ecological information. However, the geochemistry of River Atuwara sediments has received less attention over the years. One hundred and twenty-six sediments from 21 locations were collected over a two-season period from River Atuwara, and a detailed investigation of the land use and land cover (LULC) change between 1990 and 2019, analysis of selected toxic and potentially toxic metal(oid)s (TPTM) (Cu, As, Cd, Pb, Ni, Cr, Zn, Fe, Co and Al) using ICP-OES, pollution index assessment, potential source identification (using center log-transformation approach), potential ecological, and human health risk assessment were conducted. The results of the LULC change revealed that the built-up area increased by 95.58 km2, at an average rate of 3.186 km2/year over the past 30 years. The mean concentration of metal(oid)s increased in the order of Cd < As < Cr < Pb < Co < Ni < Cu < Zn < Fe < Al, and Cd < As < Cr < Co < Pb < Ni < Cu < Zn < Fe < Al during the dry and wet seasons, respectively. Meanwhile, the statistical analysis of the data spectrum inferred possible contamination from lithological and anthropogenic sources. According to the pollution load index, 90.48% of the sediment samples are polluted by the metal(oid)s. Potential ecological risk assessment identified Ni, As, and Cd as problematic to the ecological community of River Atuwara. Regarding the metal-specific hazard quotient via ingestion route, the risks are in order of Co â« As â« Pb > Cr > Cd > Al > Ni > Cu > Zn > Fe for both seasons and the carcinogenic risk for children via ingestion route presented a value higher than the safe limits for As, Cd, Cr, and Ni during both seasons. This outcome highlights the need for prompt action towards the restoration of environmental quality for communities surrounding River Atuwara.
Assuntos
Metais Pesados/análise , Poluentes Químicos da Água/análise , Criança , China , Monitoramento Ambiental , Sedimentos Geológicos , Humanos , Nigéria , Medição de Risco , Rios , Estações do AnoRESUMO
The study investigated the concentration of potentially toxic heavy metals (PTHM) in groundwater sources (hand-dug wells and boreholes), spatial distribution, source apportionment, and health risk impact on local inhabitants in Ogun state. One hundred and eight water samples from 36 locations were analysed for Cr, Ni, Pb, Fe, Mn, Mg, Ca and Al. Mean values of 0.013, 0.003, 0.010, 0.088, 0.004 and 3.906 mg/L were obtained for Pb, Cr, Ni, Fe, Mn, and Al respectively at Iju district. Meanwhile, the average values of Pb, Ni, Fe, Mn, and Al concentrations at Atan district were 0.008, 0.0023, 0.011, 0.003, and 1.319 mg/L respectively. Results also revealed that the 44.4% and 11.13% of the borehole and well-water samples surpassed the World Health Organization limits for Pb at Atan. In Iju, the concentration of Pb and Al were relatively high, exceeding the stipulated standard in 100% of the samples. The Multivariate statistical analysis employed produced principal factors that accounted for 78.674% and 86.753% of the variance at Atan and Iju region respectively. Based on this, PTHM were traced to geogenic sources (weathering, dissolution, leaching) and anthropogenic emissions from industrial activities. In addition, the hazard quotient values obtained from the health risk assessment identified potential non-carcinogenic risk due to Pb via ingestion route. Ni was found to have high carcinogenic risk on adult and children, having exceeded the threshold limit. The outcome of the carcinogenic risk assessment revealed that 88.67% (for adults) and 1.12% (for children) of the cancer risk values surpassed the specified limits at Iju, whereas the cancer risk values were considerably lesser at Atan. In conclusion, the report of this study should serve as a beacon that will spark up strategic planning, comprehensive water resource management, and extensive treatment schemes in order to address the health complications linked with environmental pollution.
RESUMO
The dataset analyzed in this article contains spatial and temporal values of the hydro-geometric parameters of River Atuwara. The hydro-geometrical data analyses of various sampling point on River Atuwara was examined and their geometric properties were taken with the use of a paddled boat, depth meter and global positioning system (GPS). The co-ordinates, width, depth, slopes, area, velocity, flow were gotten in-situ while the area and wetted perimeter were computed ex-situ. The statistical relationships between separate variables were considered using scatter plots and regression line equations. Inferences drawn from various variable comparisons can be used to validate predictive models for various time seasons.
RESUMO
In this data article, we present and analyze the demographic data of undergraduates admitted into engineering programs at Covenant University, Nigeria. The population distribution of 2649 candidates admitted into Chemical Engineering, Civil Engineering, Computer Engineering, Electrical and Electronics Engineering, Information and Communication Engineering, Mechanical Engineering, and Petroleum Engineering programs between 2002 and 2009 are analyzed by gender, age, and state of origin. The data provided in this data article were retrieved from the student bio-data submitted to the Department of Admissions and Student Records (DASR) and Center for Systems and Information Services (CSIS) by the candidates during the application process into the various engineering undergraduate programs. These vital information is made publicly available, after proper data anonymization, to facilitate empirical research in the emerging field of demographics analytics in higher education. A Microsoft Excel spreadsheet file is attached to this data article and the data is thoroughly described for easy reuse. Descriptive statistics and frequency distributions of the demographic data are presented in tables, plots, graphs, and charts. Unrestricted access to these demographic data will facilitate reliable and evidence-based research findings for sustainable education in developing countries.
RESUMO
Empirical measurement, monitoring, analysis, and reporting of learning outcomes in higher institutions of developing countries may lead to sustainable education in the region. In this data article, data about the academic performances of undergraduates that studied engineering programs at Covenant University, Nigeria are presented and analyzed. A total population sample of 1841 undergraduates that studied Chemical Engineering (CHE), Civil Engineering (CVE), Computer Engineering (CEN), Electrical and Electronics Engineering (EEE), Information and Communication Engineering (ICE), Mechanical Engineering (MEE), and Petroleum Engineering (PET) within the year range of 2002-2014 are randomly selected. For the five-year study period of engineering program, Grade Point Average (GPA) and its cumulative value of each of the sample were obtained from the Department of Student Records and Academic Affairs. In order to encourage evidence-based research in learning analytics, detailed datasets are made publicly available in a Microsoft Excel spreadsheet file attached to this article. Descriptive statistics and frequency distributions of the academic performance data are presented in tables and graphs for easy data interpretations. In addition, one-way Analysis of Variance (ANOVA) and multiple comparison post-hoc tests are performed to determine whether the variations in the academic performances are significant across the seven engineering programs. The data provided in this article will assist the global educational research community and regional policy makers to understand and optimize the learning environment towards the realization of smart campuses and sustainable education.
RESUMO
This data article presents data of academic performances of undergraduate students in Science, Technology, Engineering and Mathematics (STEM) disciplines in Covenant University, Nigeria. The data shows academic performances of Male and Female students who graduated from 2010 to 2014. The total population of samples in the observation is 3046 undergraduates mined from Biochemistry (BCH), Building technology (BLD), Computer Engineering (CEN), Chemical Engineering (CHE), Industrial Chemistry (CHM), Computer Science (CIS), Civil Engineering (CVE), Electrical and Electronics Engineering (EEE), Information and Communication Engineering (ICE), Mathematics (MAT), Microbiology (MCB), Mechanical Engineering (MCE), Management and Information System (MIS), Petroleum Engineering (PET), Industrial Physics-Electronics and IT Applications (PHYE), Industrial Physics-Applied Geophysics (PHYG) and Industrial Physics-Renewable Energy (PHYR). The detailed dataset is made available in form of a Microsoft Excel spreadsheet in the supplementary material of this article.
RESUMO
This data article represents academic performances of undergraduate students in a select Nigerian Private Tertiary institution from 2008 to 2013. The 2413 dataset categorizes students with respect to their origins (ethnicity), pre-university admission scores and Cumulative Grade Point Averages earned at the end of their study at the university. We present a descriptive statistics showing mean, median, mode, maximum, minimum, range, standard deviation and variance in the performances of these students and a boxplot representation of the performances of these students with respect to their origins.
RESUMO
In Nigerian universities, enrolment into any engineering undergraduate program requires that the minimum entry criteria established by the National Universities Commission (NUC) must be satisfied. Candidates seeking admission to study engineering discipline must have reached a predetermined entry age and met the cut-off marks set for Senior School Certificate Examination (SSCE), Unified Tertiary Matriculation Examination (UTME), and the post-UTME screening. However, limited effort has been made to show that these entry requirements eventually guarantee successful academic performance in engineering programs because the data required for such validation are not readily available. In this data article, a comprehensive dataset for empirical evaluation of entry requirements into engineering undergraduate programs in a Nigerian university is presented and carefully analyzed. A total sample of 1445 undergraduates that were admitted between 2005 and 2009 to study Chemical Engineering (CHE), Civil Engineering (CVE), Computer Engineering (CEN), Electrical and Electronics Engineering (EEE), Information and Communication Engineering (ICE), Mechanical Engineering (MEE), and Petroleum Engineering (PET) at Covenant University, Nigeria were randomly selected. Entry age, SSCE aggregate, UTME score, Covenant University Scholastic Aptitude Screening (CUSAS) score, and the Cumulative Grade Point Average (CGPA) of the undergraduates were obtained from the Student Records and Academic Affairs unit. In order to facilitate evidence-based evaluation, the robust dataset is made publicly available in a Microsoft Excel spreadsheet file. On yearly basis, first-order descriptive statistics of the dataset are presented in tables. Box plot representations, frequency distribution plots, and scatter plots of the dataset are provided to enrich its value. Furthermore, correlation and linear regression analyses are performed to understand the relationship between the entry requirements and the corresponding academic performance in engineering programs. The data provided in this article will help Nigerian universities, the NUC, engineering regulatory bodies, and relevant stakeholders to objectively evaluate and subsequently improve the quality of engineering education in the country.