Functional identification of DNA demethylase gene CaROS1 in pepper (Capsicum annuum L.) involved in salt stress.

Pepper, which is a widely cultivated important vegetable, is sensitive to salt stress, and the continuous intensification of soil salinization has affected pepper production worldwide. However, genes confer to salt tolerance are rarely been cloned in pepper. Since the REPRESSOR OF SILENCING 1 (ROS1) is a DNA demethylase that plays a crucial regulatory role in plants in response to various abiotic stresses, including salt stress. We cloned a ROS1 gene in pepper, named CaROS1 (LOC107843637). Bioinformatic analysis showed that the CaROS1 protein contains the HhH-GPD glycosylase and RRM_DME domains. qRT-PCR analyses showed that the CaROS1 was highly expressed in young and mature fruits of pepper and rapidly induced by salt stress. Functional characterization of the CaROS1 was performed by gene silencing in pepper and overexpressing in tobacco, revealed that the CaROS1 positively regulates salt tolerance ability. More detailly, CaROS1-silenced pepper were more sensitive to salt stress, and their ROS levels, relative conductivity, and malondialdehyde content were significantly higher in leaves than those of the control plants. Besides, CaROS1-overexpressing tobacco plants were more tolerant to salt stress, with a higher relative water content, total chlorophyll content, and antioxidant enzyme activity in leaves compared to those of WT plants during salt stress. These results revealed the CaROS1 dose play a role in salt stress response, providing the theoretical basis for salt tolerance genetic engineering breeding in pepper.

Mechanical Properties and Deformation Mechanisms of Nanocrystalline U-10Mo Alloys by Molecular Dynamics Simulation.

U-Mo alloys were considered to be the most promising candidates for high-density nuclear fuel. The uniaxial tensile behavior of nanocrystalline U-10Mo alloys with average grain sizes of 8-23 nm was systematically studied by molecular dynamics (MD) simulation, mainly focusing on the influence of average grain size on the mechanical properties and deformation mechanisms. The results show that Young's modulus, yield strength and ultimate tensile strength follow as average grain size increases. During the deformation process, localized phase transitions were observed in samples. Grain boundary sliding and grain rotation, as well as twinning, dominated the deformation in the smaller and larger grain sizes samples, respectively. Increased grain size led to greater localized shear deformation, resulting in greater stress drop. Additionally, we elucidated the effects of temperature and strain rate on tensile behavior and found that lower temperatures and higher strain rates not only facilitated the twinning tendency but also favored the occurrence of phase transitions in samples. Results from this research could provide guidance for the design and optimization of U-10Mo alloys materials.

High-efficiency treatment of electroless nickel plating effluent using core-shell MnFe2O4-C@Al2O3 combined with ozonation: Performance and mechanism.

Heterogeneous catalytic ozonation (HCO) has been widely applied for the treatment of wastewater. In order to maintain the structural stability and surface catalytic activity of heterogeneous catalysts during the HCO treatment of electroless nickel plating effluent (ENPE), a MnFe2O4-C@Al2O3 catalyst with a core-shell structure was synthesized. MnFe2O4-C@Al2O3 was characterized and applied in the removal of total nickel (TNi) and organic contaminants from actual ENPE, using a coupled system of HCO combined with a magnetic dithiocarbamate chelating resin (MnFe2O4-C@Al2O3/O3-MDCR). Results show that embedding Al2O3 with C and MnFe2O4 significantly increased the TNi removal efficiency (99.3%), enhanced the O3-utilization efficiency and improved the generation of reactive oxygen species (ROS). The reaction rate (k = 0.7641 min-1) and O3-utilization efficiency established for TNi removal (ΔTNi/ΔO3 =0.221) by the MnFe2O4-C@Al2O3/O3-MDCR system, were 220% and 140% higher than the Al2O3/O3-MDCR system, respectively. Catalytic mechanism analysis demonstrated that surface hydroxyl groups, oxygen vacancy, metals, the carbon surface and its functional groups, can all potentially serve as catalytic active sites, with 1O2 and •OH considered to the predominant ROS. Overall, these findings verify that the synthesized MnFe2O4-C@Al2O3 catalyst possesses excellent catalytic capabilities and outstanding structural stability, making it suitable for practical application in the treatment of wastewater effluent.

Decomplexation of heterogeneous catalytic ozonation assisted with heavy metal chelation for advanced treatment of coordination complexes of Ni.

Following the conventional physicochemical treatment of electroless nickel (Ni) plating wastewater (ENPW) in electroplating wastewater treatment plants, highly stable and recalcitrant coordination complexes of Ni (CCN) still remain. This results in various technical problems, leading to the treatment difficulty, poor wastewater biochemistry, and failure to meet effluent standards. Therefore, an efficient decomplexation system involving heterogeneous catalytic ozonation assisted with heavy metal chelation (O3/SAO3II-MDCR) was proposed in this study for the advanced treatment of CCN. The catalyst SAO3II was characterized by various methods, which revealed the mechanism of catalytic ozonation. Hydroxyl radicals (OH) and other reactive oxygen species (ROS) groups were detected, proving that catalytic ozonation was a complicated reaction process and also a foundation process of the entire system. These ROS are vital for decomplexation via heterogeneous catalytic ozonation of the system. During the catalytic decomplexation process via ozonation, CCN first underwent gradual decomposition from a highly stable macromolecular state to a volatile micromolecular state (or even completely mineralized state). Then Ni was chelated to form an insoluble and stable chelate via competitive coordination. The optimum conditions for the O3/SAO3II-MDCR system were determined by single factor static experiments. After treatment with the O3/SAO3II-MDCR system, the effluent concentration of total Ni was found to be <0.1 mg L-1, exhibiting a removal rate of up to 95.6% and achieving effective removal of total Ni from ENPW and stably meeting the discharge standard. O3/SAO3II-MDCR system can easily and hopefully be extended to practical engineering applications.

Sorption and desorption of 17α-ethinylestradiol onto sediments affected by rhamnolipidic biosurfactants.

Many studies have addressed the desorption and mobilization performances of sorbed contaminants affected by different rhamnolipidic biosurfactants. Study results have been mixed and complicated. Rhamnolipids are always microbial produced with variable homologues. In this study, two representative rhamnolipidic fractions (i.e., RL-F1 and RL-F2, which are mono- and di-rhamnolipids, respectively) were investigated and compared to determine their influence on 17α-ethynylestradiol (EE2) distribution within sediment-water sorption and desorption systems. In general, the coexistence of RL-F1 and EE2 enhanced EE2 sorption in a wider monorhamnolipidic dosage range when freshly treated sorbate was used. The sorbed EE2 concentration decreased as the RL-F1 dosage increased in the aged sorbate desorption systems. However, RL-F2 facilitated EE2 mobilization in both sorption and desorption processes. Experimental data were estimated using a conceptual model that considered the sorbed rhamnolipids and aqueous micelles for organic partitioning. The model results indicated that the rhamnolipid type is an important factor influencing organic distribution, in addition to sorbate aging process and sediment characteristics. The use of a rhamnolipidic mixture containing both mono- and di-rhamnosyl components may not achieve the desired effect when the biosurfactant-enhanced mobilization or immobilization approach is selected. These results are significant for selecting and applying rhamnolipids to remediate contaminants.