Modulating temperature for Cu2ZnSnS4 (CZTS) synthesis via hot injection method and studying the photocatalytic efficiencies for the degradation of rhodamine 6G and methylene blue pollutants.

Cu2ZnSnS4 (CZTS) was synthesized following hot injection method and the process was optimized by varying temperature conditions. Four samples at different temperatures viz., 200, 250, 300 and 350 °C were prepared and analyzed using different characterization techniques. Based on the correlation between XRD, Raman and XPS, we conclude that the formation of ZnS and SnS2 occurs at 350 °C but at 200 °C there is no breakdown of the complex as per XRD. According to Raman and XPS analysis, as the temperature rises, the bonds between the metals become weaker, which is visibly seen in Raman and XPS due to the minor peaks of copper sulfide. Scanning electron microscopic analysis confirmed nanometric particles which increase in size with temperature. The photocatalytic evaluation showed that CZTS synthesized at 200 °C performed efficiently in the removal of the two colorants, methylene blue and Rhodamine 6G, achieving 92.80% and 90.65%, respectively. The photocatalytic degradation efficiencies decreased at higher temperatures due to bigger sized CZTS particles as confirmed by SEM results. Computational simulations confirm that CZTS has a highly negative energy -25,764 Ry, confirming its structural stability and higher covalent than ionic character.

Polymer Waste Recycling of Injection Molding Purges with Softening for Cutting with Fresnel Solar Collector-A Real Problem Linked to Sustainability and the Circular Economy.

A plastic injection waste known as "purge" cannot be reintegrated into the recycling chain due to its shape, size, and composition. Grinding these cannot be carried out with traditional mills due to significant variations in size and shape. This work proposes a process and the design of a device that operates with solar energy to cut the purges without exceeding the degradation temperature. The size reduction allows reprocessing, revalorization, and handling. The purges are mixtures of processed polymers, so their characterization information is unavailable. Some characterizations were conducted before the design of the process and after the cut of the purges. Some of the most representative purges in a recycling company were evaluated. The flame test determines that all material mixtures retain thermoplasticity. The hardness (Shore D) presented changes in four of the purges being assessed, with results in a range of 59-71 before softening and 60-68 after softening. Young's modulus was analyzed by the impulse excitation technique (IET), which was 2.38-3.95 GPa before softening and 1.7-4.28 after softening. The feasibility of cutting purges at their softening temperature was evaluated. This was achieved in all the purges evaluated at 250-280 °C. FTIR allowed for corroboration of no significant change in the purges after softening. The five types of purges evaluated were polypropylene-ABS, polycarbonate-ABS-polypropylene, yellow nylon 66, acetal, and black nylon 66 with fillers, and all were easily cut at their softening temperature, allowing their manipulation in subsequent process steps.

Study of the anticorrosive behavior of samarium as a corrosion inhibitor in multilayer systems for aluminum alloy.

This study shows a multilayer system based on samarium compounds as a corrosion inhibitor and a continuous SiO2 layer by atmospheric pressure plasma jet (APPJ) as a protective barrier for aluminim alloy AA3003. One of the main advantages of this new coating is that it does not require vacuum chambers, which makes it easy to incorporate into production lines for automotive and aeronautical components, etc. The deposit of samarium corrosion inhibitor was carried out by two methods for comparison, the immersion method and a novel method to deposit corrosion inhibitor by APPJ. The multilayer system generated was homogeneous, continuous, adherent, and dense. The electrochemical behavior shows that the samarium compound was completely oxidized on coatings by the immersion method and favors corrosion. The APPJ deposition method shows a protective behavior against corrosion by both samarium compounds and silica depositions. XPS analyses show that the amount of Sm(OH)3 increases by the APPJ method compared with the immersion method since the spectrum of O1s is mainly controlled by OH. It was determined that the best processing times for the electrochemical study of the multilayer system were 40 min for the immersion method and 30 s for the APPJ method for the layer of corrosion inhibitor. In the case of the SiO2 barrier layer by APPJ, the best time was 60 s of exposure to the plasma jet and this coating could reduce the corrosion of AA3003 by 31.42%.

Antioxidants in Traditional Mexican Medicine and Their Applications as Antitumor Treatments.

Traditional medicine in Latin America and mainly in Mexico represents an essential alternative for treating different diseases. The use of plants as medicine is the product of a rich cultural tradition of the indigenous peoples, in which a great variety of species are used for the treatment of gastrointestinal, respiratory, and mental diseases and some other sicknesses; the therapeutic efficacy that they possess is due to the properties that derive from the active ingredients of plants principally antioxidants, such as phenolic compounds, flavonoids, terpenes, and tannins. An antioxidant is a substance that, at low concentrations, delays or prevents substrate oxidation through the exchange of electrons. Different methods are used to determine the antioxidant activity and the most commonly used are described in the review. Cancer is a disease in which some cells multiply uncontrollably and spread to other parts of the body, a process known as metastasis. These cells can lead to the formation of tumors, which are lumps of tissue that can be cancerous (malignant) or noncancerous (benign). Generally, the treatment of this disease consists of surgery, radiotherapy, or chemotherapy, which have side effects that decrease the quality of life of patients, so new treatments, focusing on natural resources such as plants, can be developed. This review aims to gather scientific evidence on the antioxidant compounds present in plants used in traditional Mexican medicine, specifically as antitumor treatment in the most common cancer types worldwide (e.g., breast, liver, and colorectal cancer).

Photoelectrocatalytic activity of silicon nanowires decorated with electroless copper nanoparticles and graphene oxide using a plasma jet for removal of methyl orange under visible light.

Silicon nanowires (SiNWs) have been studied due to their interesting properties, such as light trapping and catalytic activity for removing organic molecules. In this work, silicon nanowires are decorated with copper (SiNWs-CuNPs), graphene oxide (SiNWs-GO), and both copper and graphene oxide GO (SiNWs-CuNPs-GO). They were prepared and tested as photoelectrocatalysts to remove the azoic dye methyl orange (MO). The silicon nanowires were synthesized by the MACE process using HF/AgNO3 solution. The decoration with copper nanoparticles was made by galvanic displacement reaction utilizing a copper sulfate/HF solution, while decoration with GO was achieved using an atmospheric pressure plasma jet system (APPJ). The as-produced nanostructures were then characterized by SEM, XRD, XPS, and Raman spectroscopy. Cu(i) oxide was generated during the decoration with copper. Cu(ii) oxide was produced when SiNWs-CuNPs were exposed to the APPJ. GO was successfully attached on the surface of silicon nanowires and silicon nanowires decorated with copper nanoparticles. The photoelectrocatalytic activity of silicon nanostructures was tested under visible light, leading to an MO removal efficiency of 96% within 175 min with SiNWs-CuNPs-GO, followed by SiNWs-CuNPs, SiNWs-GO, undecorated SiNWs, and bulk silicon.

Thermal Energy Storage by the Encapsulation of Phase Change Materials in Building Elements-A Review.

The energy sector is one of the fields of interest for different nations around the world. Due to the current fossil fuel crisis, the scientific community develops new energy-saving experiences to address this concern. Buildings are one of the elements of higher energy consumption, so the generation of knowledge and technological development may offer solutions to this energy demand, which are more than welcome. Phase change materials (PCMs) included in building elements such as wall panels, blocks, panels or coatings, for heating and cooling applications have been shown, when heating, to increase the heat storage capacity by absorbing heat as latent heat. Therefore, the use of latent heat storage systems using phase change materials (PCMs) has been investigated within the last two decades. In the present review, the macro and micro encapsulation methods for construction materials are reviewed, the former being the most viable method of inclusion of PCMs in construction elements. In addition, based on the analysis of the existing papers on the encapsulation process of PCMs, the importance to pay more attention to the bio-based PCMs is shown, since more research is needed to process such PCMs. To determine its thermophysical and mechanical behavior at the micro and macro levels, in order to see the feasibility of substituting petroleum-based PCMs with a more environmentally friendly bio-based one, a section devoted to the excellent PCM with lightweight aggregate (PCM-LWA concrete) is presented due to the lack of description given in other reviews.