Coherent Vibrations Promote Charge-Transfer across a Graphene-Based Interface.

Discerning the impact of the coherent motion of the nuclei on the timing and efficiency of charge transfer at the donor-acceptor interface is essential for designing performance-enhanced optoelectronic devices. Here, we employ an experimental approach using photocurrent detection in coherent multidimensional spectroscopy to excite a donor aromatic macrocycle and collect the charge transferred to a 2D acceptor layer. For this purpose, we prepared a cobalt phthalocyanine-graphene (CoPc-Gr) interface. Unlike blends, the well-ordered architecture achieved through the physical separation of the two layers allows us to unambiguously collect the electrical signal from graphene alone and associate it with a microscopic understanding of the whole process. The CoPc-Gr interface exhibits an ultrafast electron-transfer signal, stemming from an interlayer mechanism. Remarkably, the signal presents an oscillating time evolution modulated by coherent vibrations originating from the laser-excited CoPc states. By performing Fourier analysis on the beatings and correlating it with the Raman features, along with a comprehensive first-principles characterization of the vibrational coupling in the CoPc excited states, we successfully identify both the orbitals and molecular vibrations that promote the charge transfer at the interface.

Halide Perovskite Artificial Solids as a New Platform to Simulate Collective Phenomena in Doped Mott Insulators.

The development of quantum simulators, artificial platforms where the predictions of many-body theories of correlated quantum materials can be tested in a controllable and tunable way, is one of the main challenges of condensed matter physics. Here we introduce artificial lattices made of lead halide perovskite nanocubes as a new platform to simulate and investigate the physics of correlated quantum materials. We demonstrate that optical injection of quantum confined excitons in this system realizes the two main features that ubiquitously pervade the phase diagram of many quantum materials: collective phenomena, in which long-range orders emerge from incoherent fluctuations, and the excitonic Mott transition, which has one-to-one correspondence with the insulator-to-metal transition described by the repulsive Hubbard model in a magnetic field. Our results demonstrate that time-resolved experiments provide a quantum simulator that is able to span a parameter range relevant for a broad class of phenomena, such as superconductivity and charge-density waves.

A Chemiresistor Sensor Array Based on Graphene Nanostructures: From the Detection of Ammonia and Possible Interfering VOCs to Chemometric Analysis.

Sensor arrays are currently attracting the interest of researchers due to their potential of overcoming the limitations of single sensors regarding selectivity, required by specific applications. Among the materials used to develop sensor arrays, graphene has not been so far extensively exploited, despite its remarkable sensing capability. Here we present the development of a graphene-based sensor array prepared by dropcasting nanostructure and nanocomposite graphene solution on interdigitated substrates, with the aim to investigate the capability of the array to discriminate several gases related to specific applications, including environmental monitoring, food quality tracking, and breathomics. This goal is achieved in two steps: at first the sensing properties of the array have been assessed through ammonia exposures, drawing the calibration curves, estimating the limit of detection, which has been found in the ppb range for all sensors, and investigating stability and sensitivity; then, after performing exposures to acetone, ethanol, 2-propanol, sodium hypochlorite, and water vapour, chemometric tools have been exploited to investigate the discrimination capability of the array, including principal component analysis (PCA), linear discriminant analysis (LDA), and Mahalanobis distance. PCA shows that the array was able to discriminate all the tested gases with an explained variance around 95%, while with an LDA approach the array can be trained to accurately recognize unknown gas contribution, with an accuracy higher than 94%.

Enhanced selectivity of target gas molecules through a minimal array of gas sensors based on nanoparticle-decorated SWCNTs.

An array of five sensors, based on carbon nanotubes (CNT) functionalized with nanoparticles of Au, TiO2, ITO, and Si has been fabricated and exposed to a selected series of target gas molecules (NH3, NO2, H2S, H2O, benzene, ethanol, acetone, 2-propanol, sodium hypochlorite, and several combinations of two gases). The results of principal component analysis (PCA) of the experimental data show that this array of sensors is able to detect different target gas and to discriminate each molecule in the 2D PCA parameters space. In particular, the possibility to include in the array a humidity sensor significantly increases the capability to discriminate the response to volatile organic compounds (VOCs), even though VOCs usually react with CNTs less than NO2 or NH3. This leads to an improvement in selectivity that could meet the requirements for gas detection applications in the field of environmental monitoring and breathomics, where sensors are exposed to a variety of different molecules and where the humidity can severely affect the overall response of the sensor. Finally, we demonstrate that the ability to test multiple sensors simultaneously can reveal a specific sensor sensitivity, addressing the best functionalization choice to improve the response of new sensors based on decorated CNT layers. In particular, our study shows the better capability of the ITO-decorated sensor to detect H2S and benzene.

Growth of hybrid carbon nanostructures on iron-decorated ZnO nanorods.

A novel carbon-based nanostructured material, which includes carbon nanotubes (CNTs), porous carbon, nanostructured ZnO and Fe nanoparticles, has been synthetized using catalytic chemical vapour deposition (CVD) of acetylene on vertically aligned ZnO nanorods (NRs). The deposition of Fe before the CVD process induces the presence of dense CNTs in addition to the variety of nanostructures already observed on the process done on the bare NRs, which range from amorphous graphitic carbon up to nanostructured dendritic carbon films, where the NRs are partially or completely etched. The combination of scanning electron microscopy and in situ photoemission spectroscopy indicate that Fe enhances the ZnO etching, and that the CNT synthesis is favoured by the reduced Fe mobility due to the strong interaction between Fe and the NRs, and to the presence of many defects, formed during the CVD process. Our results demonstrate that the resulting new hybrid shows a higher sensitivity to ammonia gas at ambient conditions (∼60 ppb) than the carbon nanostructures obtained without the aid of Fe, the bare ZnO NRs, or other one-dimensional carbon nanostructures, making this system of potential interest for environmental ammonia monitoring. Finally, in view of the possible application in nanoscale optoelectronics, the photoexcited carrier behaviour in these hybrid systems has been characterized by time-resolved reflectivity measurements.

Enhancing the sensitivity of chemiresistor gas sensors based on pristine carbon nanotubes to detect low-ppb ammonia concentrations in the environment.

The possibility of using novel architectures based on carbon nanotubes (CNTs) for a realistic monitoring of the air quality in an urban environment requires the capability to monitor concentrations of polluting gases in the low-ppb range. This limit has been so far virtually neglected, as most of the testing of new ammonia gas sensor devices based on CNTs is carried out above the ppm limit. In this paper, we present single-wall carbon nanotube (SWCNT) chemiresistor gas sensors operating at room temperature, displaying an enhanced sensitivity to NH3. Ammonia concentrations in air as low as 20 ppb have been measured, and a detection limit of 3 ppb is demonstrated, which is in the full range of the average NH3 concentration in an urban environment and well below the sensitivities so far reported for pristine, non-functionalized SWCNTs operating at room temperature. In addition to careful preparation of the SWCNT layers, through sonication and dielectrophoresis that improved the quality of the CNT bundle layers, the low-ppb limit is also attained by revealing and properly tracking a fast dynamics channel in the desorption process of the polluting gas molecules.

Targeting biomarkers in the gas phase through a chemoresistive electronic nose based on graphene functionalized with metal phthalocyanines.

Electronic noses (e-noses) have received considerable interest in the past decade as they can match the emerging needs of modern society such as environmental monitoring, health screening, and food quality tracking. For practical applications of e-noses, it is necessary to collect large amounts of data from an array of sensing devices that can detect interactions with molecules reliably and analyze them via pattern recognition. The use of graphene (Gr)-based arrays of chemiresistors in e-noses is still virtually missing, though recent reports on Gr-based chemiresistors have disclosed high sensing performances upon functionalization of the pristine layer, opening up the possibility of being implemented into e-noses. In this work, with the aim of creating a robust and chemically stable interface that combines the chemical properties of metal phthalocyanines (M-Pc, M = Fe, Co, Ni, Zn) with the superior transport properties of Gr, an array of Gr-based chemiresistor sensors functionalized with drop-cast M-Pc thin layers has been developed. The sensing capability of the array was tested towards biomarkers for breathomics application, with a focus on ammonia (NH3). Exposure to NH3 has been carried out drawing the calibration curve and estimating the detection limit for all the sensors. The discrimination capability of the array has then been tested, carrying out exposure to several gases (hydrogen sulfide, acetone, ethanol, 2-propanol, water vapour and benzene) and analysing the data through principal component analysis (PCA). The PCA pattern recognition results show that the developed e-nose is able to discriminate all the tested gases through the synergic contribution of all sensors.

π-Orbital mediated charge transfer channels in a monolayer Gr-NiPc heterointerface unveiled by soft X-ray electron spectroscopies and DFT calculations.

With the aim to identify charge transfer channels underlying device development and operation, X-Ray Photoelectron Spectroscopy (XPS), Near-Edge X-Ray Absorption Fine Structure (NEXAFS), and Resonant Photoelectron Spectroscopy (ResPES) have been employed to characterize a novel heterointerface obtained by the controlled evaporation of a Nickel Phthalocyanine (NiPc) monolayer on a single layer of Graphene (Gr) on SiC substrate. Indeed, the Gr-NiPc interface could be a promising candidate for different applications in the field of photonics, optoelectronics, and sensing, provided that clear information on the charge transfer mechanisms at the Gr-NiPc interface can be obtained. The analysis of the spectroscopic data has shown the effective functionalization and the horizontally-flat disposition of the NiPc complexes over the Gr layer. With this geometry, the main intermolecular interaction experienced by the NiPc species is the coupling with the Gr substrate, through π-symmetry orbitals, as revealed by the different behaviour of the valence band photoemission at resonance with the N K-edge and Ni L3-edge. These results have been supported by the analysis of density functional theory (DFT) calculations, that allowed for a rationalization of the experimental data, showing that charge transfer at the interface occurs from the doubly degenerate eg LUMO orbital, involving mainly N and C (pyrrole ring) pz states, to the holes in the p-doped graphene layer.

Exploring the performance of a functionalized CNT-based sensor array for breathomics through clustering and classification algorithms: from gas sensing of selective biomarkers to discrimination of chronic obstructive pulmonary disease.

An array of carbon nanotube (CNT)-based sensors was produced for sensing selective biomarkers and evaluating breathomics applications with the aid of clustering and classification algorithms. We assessed the sensor array performance in identifying target volatiles and we explored the combination of various classification algorithms to analyse the results obtained from a limited dataset of exhaled breath samples. The sensor array was exposed to ammonia (NH3), nitrogen dioxide (NO2), hydrogen sulphide (H2S), and benzene (C6H6). Among them, ammonia (NH3) and nitrogen dioxide (NO2) are known biomarkers of chronic obstructive pulmonary disease (COPD). Calibration curves for individual sensors in the array were obtained following exposure to the four target molecules. A remarkable response to ammonia (NH3) and nitrogen dioxide (NO2), according to benchmarking with available data in the literature, was observed. Sensor array responses were analyzed through principal component analysis (PCA), thus assessing the array selectivity and its capability to discriminate the four different target volatile molecules. The sensor array was then exposed to exhaled breath samples from patients affected by COPD and healthy control volunteers. A combination of PCA, supported vector machine (SVM), and linear discrimination analysis (LDA) shows that the sensor array can be trained to accurately discriminate healthy from COPD subjects, in spite of the limited dataset.

Ultrafast Carrier Relaxation Dynamics in Quantum Confined Non-Isotropic Silicon Nanostructures Synthesized by an Inductively Coupled Plasma Process.

To exploit the optoelectronic properties of silicon nanostructures (SiNS) in real devices, it is fundamental to study the ultrafast processes involving the photogenerated charges separation, migration and lifetime after the optical excitation. Ultrafast time-resolved optical measurements provide such information. In the present paper, we report on the relaxation dynamics of photogenerated charge-carriers in ultrafine SiNS synthesized by means of inductively-coupled-plasma process. The carriers' transient regime was characterized in high fluence regime by using a tunable pump photon energy and a broadband probe pulse with a photon energy ranging from 1.2 eV to 2.8 eV while varying the energy of the pump photons and their polarization. The SiNS consist of Si nanospheres and nanowires (NW) with a crystalline core embedded in a SiOx outer-shell. The NW inner core presents different typologies: long silicon nanowires (SiNW) characterized by a continuous core (with diameters between 2 nm and 15 nm and up to a few microns long), NW with disconnected fragments of SiNW (each fragment with a length down to a few nanometers), NW with a "chaplet-like" core and NW with core consisting of disconnected spherical Si nanocrystals. Most of these SiNS are asymmetric in shape. Our results reveal a photoabsorption (PA) channel for pump and probe parallel polarizations with a maximum around 2.6 eV, which can be associated to non-isotropic ultra-small SiNS and ascribed either to (i) electron absorption driven by the probe from some intermediate mid-gap states toward some empty state above the bottom of the conduction band or (ii) the Drude-like free-carrier presence induced by the direct-gap transition in the their band structure. Moreover, we pointed up the existence of a broadband and long-living photobleaching (PB) in the 1.2-2.0 eV energy range with a maximum intensity around 1.35 eV which could be associated to some oxygen related defect states present at the Si/SiOx interface. On the other hand, this wide spectral energy PB can be also due to both silicon oxide band-tail recombination and small Si nanostructure excitonic transition.

Gas Sensing with Solar Cells: The Case of NH3 Detection through Nanocarbon/Silicon Hybrid Heterojunctions.

Photovoltaic (PV) cells based on single-walled carbon nanotube (SWCNT)/silicon (Si) and multiwalled carbon nanotube (MWCNT)/Si junctions were tested under exposure to NH3 in the 0-21 ppm concentration range. The PV cell parameters remarkably changed upon NH3 exposure, suggesting that these junctions, while being operated as PV cells, can react to changes in the environment, thereby acting as NH3 gas sensors. Indeed, by choosing the open-circuit voltage, VOC, parameter as read-out, it was found that these cells behaved as gas sensors, operating at room temperature with a response higher than chemiresistors developed on the same layers. The sensitivity was further increased when the whole current-voltage (I-V) curve was collected and the maximum power values were tracked upon NH3 exposure.

Tuning the Ultrafast Response of Fano Resonances in Halide Perovskite Nanoparticles.

The full control of the fundamental photophysics of nanosystems at frequencies as high as few THz is key for tunable and ultrafast nanophotonic devices and metamaterials. Here we combine geometrical and ultrafast control of the optical properties of halide perovskite nanoparticles, which constitute a prominent platform for nanophotonics. The pulsed photoinjection of free carriers across the semiconducting gap leads to a subpicosecond modification of the far-field electromagnetic properties that is fully controlled by the geometry of the system. When the nanoparticle size is tuned so as to achieve the overlap between the narrowband excitons and the geometry-controlled Mie resonances, the ultrafast modulation of the transmittivity is completely reversed with respect to what is usually observed in nanoparticles with different sizes, in bulk systems, and in thin films. The interplay between chemical, geometrical, and ultrafast tuning offers an additional control parameter with impact on nanoantennas and ultrafast optical switches.

Development of a Sensing Array for Human Breath Analysis Based on SWCNT Layers Functionalized with Semiconductor Organic Molecules.

A sensor array based on heterojunctions between semiconducting organic layers and single walled carbon nanotube (SWCNT) films is produced to explore applications in breathomics, the molecular analysis of exhaled breath. The array is exposed to gas/volatiles relevant to specific diseases (ammonia, ethanol, acetone, 2-propanol, sodium hypochlorite, benzene, hydrogen sulfide, and nitrogen dioxide). Then, to evaluate its capability to operate with real relevant biological samples the array is exposed to human breath exhaled from healthy subjects. Finally, to provide a proof of concept of its diagnostic potential, the array is exposed to exhaled breath samples collected from subjects with chronic obstructive pulmonary disease (COPD), an airway chronic inflammatory disease not yet investigated with CNT-based sensor arrays, and breathprints are compared with those obtained from of healthy subjects. Principal component analysis shows that the sensor array is able to detect various target gas/volatiles with a clear fingerprint on a 2D subspace, is suitable for breath profiling in exhaled human breath, and is able to distinguish subjects with COPD from healthy subjects based on their breathprints. This classification ability is further improved by selecting the most responsive sensors to nitrogen dioxide, a potential biomarker of COPD.

Dramatic efficiency boost of single-walled carbon nanotube-silicon hybrid solar cells through exposure to ppm nitrogen dioxide in air: An ab-initio assessment of the measured device performances.

We observed a 73% enhancement of the power conversion efficiency (PCE) of a photovoltaic cell based on a single wall carbon nanotube/Si hybrid junction after exposing the device to a limited amount (10 ppm) of NO2 diluted in dry air. On the basis of a computational modeling of the junction, this enhancement is discussed in terms of both carbon nanotube (CNT) p-doping, induced by the interaction with the oxidizing molecules, and work function changes across the junction. Unlike studies so far reported, where the PCE enhancement was correlated only qualitatively to CNT doping, our study (i) provides a novel and reversible path to tune and considerably enhance the cell efficiency by a few ppm gas exposure, and (ii) shows computational results that quantitatively relate the observed effects to the electrostatics of the cell through a systematic calculation of the work function. These effects have been cross-checked by exposing the cell to reducing molecules (i.e·NH3) that resulted to be detrimental to the cell efficiency, consistently with the theoretical ab-initio calculations.

Interface Chemistry of Graphene/Cu Grafted By 3,4,5-Tri-Methoxyphenyl.

Chemical reaction with diazonium molecules has revealed to be a powerful method for the surface chemical modification of graphite, carbon nanotubes and recently also of graphene. Graphene electronic structure modification using diazonium molecules is strongly influenced by graphene growth and by the supporting materials. Here, carrying on a detailed study of core levels and valence band photoemission measurements, we are able to reconstruct the interface chemistry of trimethoxybenzenediazonium-based molecules electrochemically grafted on graphene on copper. The band energy alignment at the molecule-graphene interface has been traced revealing the energy position of the HOMO band with respect to the Fermi level.

Hybridized C-O-Si Interface States at the Origin of Efficiency Improvement in CNT/Si Solar Cells.

Despite the astonishing values of the power conversion efficiency reached, in just less than a decade, by the carbon nanotube/silicon (CNT/Si) solar cells, many doubts remain on the underlying transport mechanisms across the CNT/Si heterojunction. Here, by combining transient optical spectroscopy in the femtosecond timescale, X-ray photoemission, and a systematic tracking of I-V curves across all phases of the interlayer SiOx growth at the interface, we grasp the mechanism that adequately preserves charge separation at the junction, hindering the photoexcited carrier recombination. Moreover, supported by ab initio calculations aimed to model the complex CNT-Si heterointerface, we show that oxygen-related states at the interface act as entrapping centers for the photoexcited electrons, thus preventing recombination with holes that can flow from Si to CNT across the SiOx layer.

Role of the Substrate Orientation in the Photoinduced Electron Dynamics at the Porphyrin/Ag Interface.

Photochemically activated reactions, despite being a powerful tool to covalently stabilize self-organized molecular structures on metallic surfaces, have struggled to take off due to several not yet well understood light-driven processes that can affect the final result. A thorough understanding of the photoinduced charge transfer mechanisms at the organic/metal interface would pave the way to controlling these processes and to developing on-surface photochemistry. Here, by time-resolved two-photon photoemission measurements, we track the relaxation processes of the first two excited molecular states at the interface between porphyrin, the essential chromophore in chlorophyll, and two different orientations of the silver surface. Due to the energy alignment of the porphyrin first excited state with the unoccupied sp-bands, an indirect charge transfer path, from the substrate to the molecule, opens in porphyrin/Ag(100) 250 fs after the laser pump excitation. The same time-resolved measurements carried out on porphyrin/Ag(111) show that in the latter case such an indirect path is not viable.

Experimental evidence of above-threshold photoemission in solids.

Nonlinear photoemission from a silver single crystal is investigated by femtosecond laser pulses in a perturbative regime. A clear observation of above-threshold photoemission in solids is reported for the first time. The ratio between the three-photon above-threshold and the two-photon Fermi edges is found to be 10(-4). This value constitutes the only available benchmark for theories aimed at understanding the mechanism responsible for above-threshold photoemission in solids.

Violation of the electric-dipole selection rules in indirect multiphoton excitation of image-potential states on Ag(100).

Photoemission from image potential states on Ag(100) is investigated using angle resolved multiphoton photoemission induced by 150 fs laser pulses. For the first time we demonstrate that image potential states populated by indirect transitions can be observed with light polarized parallel to the plane of incidence and light polarized normal to the plane of incidence. The latter is a process normally forbidden by the dipole transition selection rules. These findings are related to the creation of a hot-electron population whose properties largely remains to be understood.