Effects of Age and Maturation on Lower Extremity Range of Motion in Male Youth Soccer Players.

ABSTRACT: Robles-Palazón, FJ, Ayala, F, Cejudo, A, De Ste Croix, M, Sainz de Baranda, P, and Santonja, F. Effects of age and maturation on lower extremity range of motion in male youth soccer players. J Strength Cond Res 36(5): 1417-1425, 2022-Restricted joint range of motion (ROM) has been considered as a primary risk factor for some sport-related injuries. Consequently, preparticipation assessment of lower extremity joints ROM could help identify youth soccer players at high risk of injury and to aid in the design of tailored age and maturational specific training interventions. The purpose of this study was to analyze and compare the influence of chronological age and maturational stage on several lower extremity ROM measures, as well as to describe the lower extremity ROM profile using a comprehensive approach in youth soccer players. A total of 286 male youth soccer players' ROM were assessed including passive hip (extension [PHE], adduction with hip flexed 90° [PHADHF90°], flexion with knee flexed [PHFKF] and extended [PHFKE], abduction with hip neutral [PHABD] and flexed 90° [PHABDHF90°], external [PHER] and internal [PHIR] rotation), knee (flexion [PKF]) and ankle (dorsiflexion with knee flexed [ADFKF] and extended [ADFKE]) ROMs. Between-group differences were analyzed using a one-way analysis of variance (ANOVA) and magnitude-based decisions. The results only report statistically significant (p < 0.05; d > 0.5) and clinically relevant differences (>8°) for the PKF ROM between U12 vs. U19, and Pre-PHV vs. Post-PHV groups. Furthermore, approximately 40, 35, and 20% of players displayed restrictions in their PHFKE, PKF, and ADFKF ROM values, respectively. These findings emphasize the necessity of prescribing (across all age groups and periods of growth and maturation) compensatory measures in daily soccer training, and these exercises should be equally applied to both limbs with the aim of improving PHFKE, PKF and ADFKF ROM values.

Zero-Dimensional Hybrid Organic-Inorganic Lead Halides and Their Post-Synthesis Reversible Transformation into Three-Dimensional Perovskites.

Zero-dimensional (0D) mixed-halide hybrid organic-inorganic MA4PbX6·2H2O (MA = CH3NH3+; X = Br1 - xIx with 0 < x < 1) has been synthesized by a solvent-free mechanochemical approach. It has been shown that this 0D phase with sharp absorption features in the near-UV is a hydrated structure, which can be reversibly transformed into the three-dimensional perovskite phase MAPbX3 by simple thermal annealing (dehydration) in air. This work reveals a new approach to hybrid organic-inorganic perovskites and related 0D structures, which have so far only been thoroughly studied for the inorganic Cs4PbX6 compounds.

Writing on Nanocrystals: Patterning Colloidal Inorganic Nanocrystal Films through Irradiation-Induced Chemical Transformations of Surface Ligands.

In the past couple of decades, colloidal inorganic nanocrystals (NCs) and, more specifically, semiconductor quantum dots (QDs) have emerged as crucial materials for the development of nanoscience and nanotechnology, with applications in very diverse areas such as optoelectronics and biotechnology. Films made of inorganic NCs deposited on a substrate can be patterned by e-beam lithography, altering the structure of their capping ligands and thus allowing exposed areas to remain on the substrate while non-exposed areas are redispersed in a solvent, as in a standard lift-off process. This methodology can be described as a "direct" lithography process, since the exposure is performed directly on the material of interest, in contrast with conventional lithography which uses a polymeric resist as a mask for subsequent material deposition (or etching). A few reports from the late 1990s and early 2000s used such direct lithography to fabricate electrical wires from metallic NCs. However, the poor conductivity obtained through this process hindered the widespread use of the technique. In the early 2010s, the same method was used to define fluorescent patterns on QD films, allowing for further applications in biosensing. For the past 2-3 years, direct lithography on NC films with e-beams and X-rays has gone through an important development as it has been demonstrated that it can tune further transformations on the NCs, leading to more complex patternings and opening a whole new set of possible applications. This Perspective summarizes the findings of the past 20 years on direct lithography on NC films with a focus on the latest developments on QDs from 2014 and provides different potential future outcomes of this promising technique.

One-Pot Hybrid SnO2 /Poly(methyl methacrylate) Nanocomposite Formation through Pulsed Laser Irradiation.

The localized in situ formation of tin dioxide (SnO2 ) nanoparticles embedded in poly(methyl methacrylate) (PMMA) films is presented. This is achieved by the photoinduced conversion of the tin acetate precursor included in polymeric films, through controlled UV or visible pulsed laser irradiation at λ=355 and 532 nm, respectively. The evolution of the formation of nanoparticles is followed by UV/Vis spectroscopy and shows that their growth is affected in different ways by the laser pulses at the two applied wavelengths. This, in combination with electron microscopy analysis, reveals that, depending on the irradiation wavelength, the size of the nanoparticles in the final nanocomposites differs. This difference is attributed to distinct mechanistic pathways that lead to the synthesis of small nanoparticles (from 1.5 to 4.5 nm) at λ=355 nm, whereas bigger ones (from 5 to 16 nm) are formed at λ=532 nm. At the same time, structural studies with both X-ray and electron diffraction measurements demonstrate the crystallinity of SnO2 nanoparticles in both cases, whereas XPS analysis confirms the light-induced oxidation of tin acetate into SnO2 . Taken all together, it is demonstrated that the pulsed laser irradiation at λ=355 and 532 nm leads to the formation of SnO2 nanoparticles with defined features highly dispersed in PMMA solid matrices.

Training Effects of the FIFA 11+ and Harmoknee on Several Neuromuscular Parameters of Physical Performance Measures.

The main purpose of this study was to analyse the training effects of the FIFA 11+ and Harmoknee on several parameters of physical performance measures in youth amateur football players. 41 adolescent players were randomised within each team into 2 groups (team 1: control vs. FIFA 11+; team 2: control vs. Harmoknee). The FIFA 11+ and Harmoknee groups performed the program 3 times a week for 4 weeks; the control groups completed their usual warm-up routines. 13 physical performance measures (joint range of motion, dynamic postural control, single legged hop limb symmetry, sprint time, jumping height and agility) were assessed. All physical performance parameters were compared via a magnitude-based inference analysis. Significant between-group differences (in favour of the FIFA 11+ players) were found for dynamic postural control (anterior [2.5%] and posteromedial [7.2%] distances), single legged hop limb symmetry (side-to-side symmetry during a triple hop test [8.3%]), 10 (8.4%) and 20 (1.8%) m sprint times and jumping height (9.1%) neuromuscular outcomes. For the Harmoknee, significant differences (in comparison to its paired control group) were found only for 10 (2.7%) and 20 (2.9%) m sprint times and jumping height (9.7%). Therefore, the main findings of this study suggest exchanging traditional warm-up programmes for the FIFA 11+ in male youth soccer players based on its superior effects on some neuromuscular parameters (sprinting, jumping and stability) of physical performance.

Carbodiimide/NHS derivatization of COOH-terminated SAMs: activation or byproduct formation?

COOH-terminated self-assembled monolayers (SAMs) are widely used in biosensor technology to bind different amine-containing biomolecules. A covalent amide bond, however, can be achieved only if the carboxylic acids are activated. This activation process usually consists of forming an N-hydroxysuccinimidyl ester (NHS-ester) by consecutively reacting carboxylic acids with a carbodiimide and NHS. Though many papers report using this method,1-8 the experimental conditions vary greatly between them and chemical characterization at this stage is often omitted. Evidence of an efficient activation is therefore rarely shown. Furthermore, recent publications9-11 have highlighted the complexity of this process, with the possible formation of different byproducts. In this paper, we have conducted a study on NHS activation under different conditions with chemical characterization by polarization-modulation infrared reflection-absorption spectroscopy (PM-IRRAS) and time-of-flight secondary ion mass spectroscopy (ToF-SIMS). Our results indicate that the nature of the solvent and carbodiimide and the reactant concentrations play crucial roles in activation kinetics and efficiency.

Things to keep in mind when selecting physical assessments in youth soccer: Correlations between test performances, interlimb asymmetries, and effects of maturation.

A range of field-based tests have been proposed for inclusion in physical performance assessment batteries. However, there are obvious time and human resources constraints in applied settings. The knowledge of potential relationships between tests on performance, asymmetries, as well as maturation-induced changes, may help select the most informative and least time-consuming testing battery. The purposes of this study were: (1) to determine correlations in performance between different field-based tests, in interlimb asymmetry between those unilateral tests, and between asymmetry scores and test performances, and (2) to determine the influence of players' maturity status on test performances and asymmetries. A total of 309 male youth soccer players completed a nine-test battery including y-balance test, drop vertical jump, countermovement jump, single leg countermovement jump, standing long jump, single leg hop for distance, Illinois agility test, 10 m sprint, and 20 m sprint. The results revealed moderate-to-very large relationships between jump, sprint, and agility performances (r = 0.43-0.94), but weak-to-moderate correlations between these tests and balance scores (r ≤ 0.38). No relevant relationship (r ≤ 0.32) for asymmetries detected through different unilateral tests was found, nor between asymmetries and performance scores (r < 0.29). While maturity status clearly influenced players' performance, a limited impact on asymmetries was evident. Despite the mentioned relationships, the low shared variance between tests indicates that they should not be used interchangeably, and coaches should select those with the greatest specificity for the sport. Asymmetries do not influence performance, but their prevalence and unchanging nature with maturation can be seen as an opportunity for the identification of highly asymmetrical players and the application of interventions to improve the weaker limb, irrespective of the athlete's stage of development. To this end, the single leg countermovement jump might be viewed as an appropriate test in male youth soccer.

A systematic review and network meta-analysis on the effectiveness of exercise-based interventions for reducing the injury incidence in youth team-sport players. Part 2: an analysis by movement patterns.

The objectives of this network meta-analysis were: (a) to estimate and compare the pooled effects of some injury prevention programs (IPPs) whose exercise-based components were categorized using a movement pattern-specific taxonomy on reducing overall and some specific body regions (lower extremity, thigh, knee, and ankle) injury incidences in youth team sport athletes and (b) to explore the individual effects of these components on the injury incidence rates (IIRs) previously mentioned. Searches were performed in PubMed, Web of Science, SPORTDiscus, and Cochrane Library. Eligible criteria were: exercise-based interventions comprised of exercises involving athletic motor skill competencies and evaluated against a control group, overall IIRs were reported, and youth (≤19 years old) team sport players. For the current analysis, a taxonomy based on movement patterns was employed for exercise component identification (upper body pushing and pulling; lower body concentric and eccentric; core; mechanics; acceleration; and lower body stability). Pooled effects were calculated by frequentist random effects pairwise and network meta-analyses. Nineteen studies were included. Most of the IPPs exhibit risk reduction when compared to their control groups on overall, lower extremity, and ankle injuries. Interventions comprised of lower body concentric and eccentric, core, mechanics, and lower body stability exercises were the most effective measures for reducing these injuries. None of the IPPs demonstrated to be effective for reducing thigh injuries, and contradictory results were found for knee injuries. Individual analysis at component level revealed that the lower body (bilateral and unilateral, concentric, and eccentric) component was the only one associated with a significant reduction on overall injuries. Indirect evidence suggests that interventions incorporating lower body concentric and eccentric, core, mechanics, and lower body stability exercises might be the most effective for reducing overall, lower extremity, and ankle injuries in youth team sports.

The categorization of exercise components based on the movement patterns might, a priori, be considered a criterion more closely associated with the injury phenomenon.Lower body concentric and eccentric, core, mechanics, and lower body stability exercises should be incorporated to any training program aimed at minimizing the risk of injury in youth.The ineffectiveness of interventions on the reduction of thigh injuries reveals the need for reconsideration of injury prevention strategies.

Force plate methodologies applied to injury profiling and rehabilitation in sport: A scoping review protocol.

Musculoskeletal injuries are a common health problem among sporting populations. Such injuries come with a high financial burden to the involved organisations and can have a detrimental impact on the career attainment of injured individuals. Force plates are now a common tool available to sport and exercise science and medicine professionals to enable them to profile injury risk predisposition and modulate the rehabilitation process within sporting environments. This is because contemporary force plate technology is portable and affordable and often comes with software that enables the automatic and immediate feedback of test variables to key stakeholders. However, to our knowledge, to date, there has been no comprehensive review of the scientific literature pertaining to clinical applications of force plate technology. Therefore, this article presents a protocol and a methodological framework to perform a scoping review to identify and map the available scientific literature in which force plates have been applied to the injury profiling and rehabilitation of athletes. The specific aims of the scoping review are 1) to identify and describe the force plate tests, methodologies, and metrics used to screen for injury risk and guide the return of injured athletes to full-time training and competition, 2) to identify potential trends and/or differences by participants' age, sex, and/or level of performance in tests, methodologies, and metrics selected, and 3) to identify key gaps in the existing evidence base and new questions that should be addressed in future research. The global aim of the scoping review is to improve practitioner decision-making around force plate test and variable selection when applied to the injury prevention and rehabilitation of sporting populations.

The Kneeling Isometric Plantar Flexor Test: Preliminary Reliability and Feasibility in Professional Youth Football.

Calf injuries are common in professional football; thus, the establishment of reliable and time-efficient methods of measuring the peak force capabilities of the plantar flexors with equipment that is accessible to football practitioners is valuable. In this study, we determined the preliminary reliability and feasibility of a new test, termed the kneeling isometric plantar flexion test (KIPFT), for footballers. Twenty-one male youth footballers (age = 17.8 ± 1.1 years, height = 182 ± 5 cm, weight = 77.6 ± 5.9 kg) from English League One football clubs completed three trials of the KIPFT on a wireless force plate at the end (2022-2023) and start (2023-2024) of the season. The within-session reliability of the peak force (relative to body weight) was good-excellent for both limbs and both occasions. On average, performance of the KIPFT took just over 1 min per limb and ~2 min to set up. The peak force values were larger for the non-dominant limbs only at the start versus the end of the season, but there were no between-limb differences. From these results, it was determined that (1) the KIPFT is feasible, (2) a minimum of 32 footballers would be required to establish its between-session reliability with ≥80% statistical power and (3) large-cohort normative data for the KIPFT may be best collected at the start of the football season.

Quadruple-Cation Wide-Bandgap Perovskite Solar Cells with Enhanced Thermal Stability Enabled by Vacuum Deposition.

Vacuum processing of multicomponent perovskites is not straightforward, because the number of precursors is in principle limited by the number of available thermal sources. Herein, we present a process which allows increasing the complexity of the formulation of vacuum-deposited lead halide perovskite films by multisource deposition and premixing both inorganic and organic components. We apply it to the preparation of wide-bandgap CsMAFA triple-cation perovskite solar cells, which are found to be efficient but not thermally stable. With the aim of stabilizing the perovskite phase, we add guanidinium (GA+) to the material formulation and obtained CsMAFAGA quadruple-cation perovskite films with enhanced thermal stability, as observed by X-ray diffraction and rationalized by microstructural analysis. The corresponding solar cells showed similar performance with improved thermal stability. This work paves the way toward the vacuum processing of complex perovskite formulations, with important implications not only for photovoltaics but also for other fields of application.

Dimensionality Controls Anion Intermixing in Electroluminescent Perovskite Heterojunctions.

Metal halide perovskites have emerged as a promising group of materials for optoelectronic applications such as photovoltaics, light emission, and photodetectors. So-far, in particular, the stability of light-emitting devices is limited, which is in part attributed to the intrinsic ionic conductivity of these materials. High-performance devices inevitably contain heterojunctions similar to other optoelectronic devices based on oxide perovskites, II-VI, or III-V group semiconductors. To enable efficient heterojunctions, ion exchange at the interface between different layers should be controlled. Herein, we report a method that enables to control and monitor the extent of anion intermixing between solution-processed lead bromide and vacuum-deposited lead chloride perovskite films. Taking advantage of the ability to fine tune the layer thicknesses of the vacuum-deposited films, we systematically study the effect of film thickness on anionic intermixing. Using these multiple layers, we prepare proof of principle light-emitting devices exhibiting green and blue electroluminescence.

Vacuum-Deposited Cesium Tin Iodide Thin Films with Tunable Thermoelectric Properties.

Most current thermoelectric materials have important drawbacks, such as toxicity, scarceness, and peak operating temperatures above 300 °C. Herein, we report the thermoelectric properties of different crystalline phases of Sn-based perovskite thin films. The 2D phase, Cs2SnI4, is obtained through vacuum thermal deposition and easily converted into the black ß phase of CsSnI3 (B-ß CsSnI3) by annealing at 150 °C. B-ß CsSnI3 is a p-type semiconductor with a figure of merit (ZT) ranging from 0.021 to 0.033 for temperatures below 100 °C, which makes it a promising candidate to power small electronic devices such as wearable sensors which may be interconnected in the so-called Internet of Things. The B-ß phase is stable in nitrogen, whereas it spontaneously oxidizes to Cs2SnI6 upon exposure to air. Cs2SnI6 shows a negative Seebeck coefficient and an ultralow thermal conductivity. However, the ZT values are 1 order of magnitude lower than for B-ß CsSnI3 due to a considerably lower electrical conductivity.

Epidemiology of injuries in male and female youth football players: A systematic review and meta-analysis.

BACKGROUND: To conduct a systematic review and meta-analysis of epidemiological data of injuries in male and female youth football players. METHODS: Searches were performed in MEDLINE/PubMed, Web of Science, Cochrane Library, and SPORTDiscus databases. Studies were considered if they reported injury incidence rate in male and female youth (≤19 years old) football players. Two reviewers (FJRP and ALV) extracted data and assessed trial quality using the Strengthening the Reporting of Observational Studies in Epidemiology (STROBE) statement and the Newcastle Ottawa Scale. The Grading of Recommendations Assessment, Development, and Evaluation approach determined the quality of evidence. Studies were combined using a Poisson random effects regression model. RESULTS: Forty-three studies were included. The overall incidence rate was 5.70 injuries/1000 h in males and 6.77 injuries/1000 h in females. Match injury incidence (14.43 injuries/1000 h in males and 14.97 injuries/1000 h in females) was significantly higher than training injury incidence (2.77 injuries/1000 h in males and 2.62 injuries/1000 h in females). The lower extremity had the highest incidence rate in both sexes. The most common type of injury was muscle/tendon for males and joint/ligament for females. Minimal injuries were the most common in both sexes. The incidence rate of injuries increased with advances in chronological age in males. Elite male players presented higher match injury incidence than sub-elite players. In females, there was a paucity of data for comparison across age groups and levels of play. CONCLUSION: The high injury incidence rates and sex differences identified for the most common location and type of injury reinforce the need for implementing different targeted injury-risk mitigation strategies in male and female youth football players.

Incidence, burden, and pattern of injuries in Spanish male youth soccer players: A prospective cohort study.

OBJECTIVES: To explore the incidence, burden, and pattern of injuries in Spanish male youth soccer players during a 9-month competitive season (from September to May-June). DESIGN: Prospective cohort study. PARTICIPANTS: 314 young (10-19 years) soccer players. MAIN OUTCOME MEASURES: Incidence, burden, location, type, severity, mechanism, and circumstance of injuries, as well as potential differences by tactical position, month of the year, age group, and maturity status. RESULTS: A total of 146 time-loss injuries were sustained by 101 different players. This resulted in an overall injury incidence of 3.1 injuries per 1000 h, a training injury incidence of 1.8 injuries per 1000 h, and a match injury incidence of 11.2 injuries per 1000 h. The probability of injury over the season was 34%. Most of the injuries affected the lower extremity and were classified as muscle/tendon injuries, with hamstring muscle injuries representing the most burdensome diagnosis. The incidence of injuries increased with age and maturation, but a heightened risk of overuse injuries during periods around peak height velocity was also identified. CONCLUSIONS: These findings suggest a need for implementing specific injury prevention measures. Due to the high burden shown, these measures should mainly focus on reducing the number and severity of hamstring muscle injuries.

Efficient Wide-Bandgap Mixed-Cation and Mixed-Halide Perovskite Solar Cells by Vacuum Deposition.

Vacuum deposition methods are increasingly applied to the preparation of perovskite films and devices, in view of the possibility to prepare multilayer structures at low temperature. Vacuum-deposited, wide-bandgap solar cells based on mixed-cation and mixed-anion perovskites have been scarcely reported, due to the challenges associated with the multiple-source processing of perovskite thin films. In this work, we describe a four-source vacuum deposition process to prepare wide-bandgap perovskites of the type FA1-n Cs n Pb(I1-x Br x )3 with a tunable bandgap and controlled morphology, using FAI, CsI, PbI2, and PbBr2 as the precursors. The simultaneous sublimation of PbI2 and PbBr2 allows the relative Br/Cs content to be decoupled and controlled, resulting in homogeneous perovskite films with a bandgap in the 1.7-1.8 eV range and no detectable halide segregation. Solar cells based on 1.75 eV bandgap perovskites show efficiency up to 16.8% and promising stability, maintaining 90% of the initial efficiency after 2 weeks of operation.

Pulsed Laser Deposition of Cs2AgBiBr6: from Mechanochemically Synthesized Powders to Dry, Single-Step Deposition.

Cs2AgBiBr6 has been proposed as a promising lead-free and stable double perovskite alternative to hybrid and lead-based perovskites. However, the low solubility of precursors during wet synthesis, or the distinct volatility of components during evaporation, results in complex multistep synthesis approaches, hampering the widespread employment of Cs2AgBiBr6 films. Here, we present pulsed laser deposition of Cs2AgBiBr6 films as a dry, single-step and single-source deposition approach for high-quality film formation. Cs2AgBiBr6 powders were prepared by mechanochemical synthesis and pressed into a solid target maintaining phase purity. Controlled laser ablation of the double perovskite target in vacuum and a substrate temperature of 200 °C results in the formation of highly crystalline Cs2AgBiBr6 films. We discuss the importance of deposition pressure to achieve stoichiometric transfer and of substrate temperature during PLD growth to obtain high-quality Cs2AgBiBr6 films with grain sizes > 200 nm. This work demonstrates the potential of PLD, an established technique in the semiconductor industry, to deposit complex halide perovskite materials while being compatible with optoelectronic device fabrication, such as UV and X-ray detectors.

Reliability, validity, and maturation-related differences of frontal and sagittal plane landing kinematic measures during drop jump and tuck jump screening tests in male youth soccer players.

OBJECTIVES: To determine the inter-rater and intra-rater reliability of frontal and sagittal plane landing kinematic measures during drop jump (DVJ) and tuck jump (TJA) tasks in male youth soccer players, to assess the concurrent validity between DVJ and TJA tests, and to evaluate the ability of both tasks to detect differences between players' stage of maturation. DESIGN: Cross-sectional study. PARTICIPANTS: 223 male youth soccer players. MAIN OUTCOME MEASURES: Frontal plane knee projection angles (FPPA), and hip (HF), knee (KF) and ankle (AF) flexion angles at initial contact (IC) and peak flexion (PF) (i.e., the deepest landing position) in the sagittal plane were assessed. RESULTS: Good-to-excellent inter- and intra-rater reliability (ICC > 0.75; TEMST < 0.3; CVTE < 5%) for the FPPA, HF and KF during DVJ and TJA tasks were found. A low concurrent validity between DVJ and TJA measures was reported. Differences by maturity status (BF10 > 10; error < 10; δ > 0.6) were only identified for the TJA. Pre-PHV group reported higher FPPA, HF-IC, HF-PF, and KF-IC values, as well as lower AF-IC than post-PHV. Pre-PHV also displayed greater HF-IC and KF-IC than circa-PHV group. CONCLUSIONS: Although both tests are reliable, the TJA might be viewed as a more informative tool given it shows greater FPPA and can also detect differences by maturity status.

Melamine Foams Decorated with In-Situ Synthesized Gold and Palladium Nanoparticles.

A versatile and straightforward route to produce polymer foams with functional surface through their decoration with gold and palladium nanoparticles is proposed. Melamine foams, used as polymeric porous substrates, are first covered with a uniform coating of polydimethylsiloxane, thin enough to assure the preservation of their original porous structure. The polydimethylsiloxane layer allows the facile in-situ formation of metallic Au and Pd nanoparticles with sizes of tens of nanometers directly on the surface of the struts of the foam by the direct immersion of the foams into gold or palladium precursor solutions. The effect of the gold and palladium precursor concentration, as well as the reaction time with the foams, to the amount and sizes of the nanoparticles synthesized on the foams, was studied and the ideal conditions for an optimized functionalization were defined. Gold and palladium contents of about 1 wt.% were achieved, while the nanoparticles were proven to be stably adhered to the foam, avoiding potential risks related to their accidental release.

Flexibility in Spanish Elite Inline Hockey Players: Profile, Sex, Tightness and Asymmetry.

Limited ranges of motion (ROM) have been considered as a relevant risk factor for team sports injuries. The main purposes of the current study were to describe the lower extremity ROM profile, muscular tightness and asymmetries in elite inline hockey players and to examine sex-related differences. Twenty professional inline hockey players from 2 Spanish National Teams (male and female) were measured of passive hip extension [HE], hip adduction with hip flexed 90° [HAD-HF], hip flexion with the knee flexed [HF-KF] and extended [HF-KE], hip abduction with the hip neutral [HAB] and hip flexed 90° [HAB-HF], hip external [HER] and internal [HIR] rotation, knee flexion [KF], ankle dorsiflexion with the knee flexed [ADF-KF] and extended [ADF-KE] ROMs of the dominant and non-dominant leg ROMs were taken. A paired t-test was carried out to assess asymmetries. ROM values were classified as "normal versus tightness", and "normal versus asymmetry" according to the proposed reference values. The effect size for each variable was analyzed. Male team exhibited asymmetry in HF-KF (133.2° dominant vs. 129.8° non-dominant; p = 0.042; d = 0.7243 [moderate effect sizes]) and female team in ADF-KF (38.8° dominant vs. 41.0 non-dominant; p = 0.001; d = 0.6 [moderate effect sizes]) and HAB ROM (41.2° dominant vs. 38.8 non-dominant; p = 0.005; d = 1.1767 [moderate effect sizes]). Male players reported asymmetry in HAD-HF (n = 5), HER (n = 4) and HE (n = 3), whereas female players presented asymmetries in HER (n = 4), HE (n = 3) and KF (n = 2). Overall, 20-100% of all participants showed limited KF, HF_KE, HIR, HE, ADF_KF, HAD-HF, HF-KF, ADF_KE, HTR and HER ROM. The results of this study reinforce the requirement of prescribing exercises aimed at improving hip, knee and ankle ROM within everyday inline hockey practices. In addition, as some asymmetries were found, unilateral flexibility training should be considered where appropriate.