RESUMO
The transport properties of commercial carbon nanofibers (CNFs) produced by chemical vapor deposition (CVD) depend on the various conditions used during their growth and post-growth synthesis, which also affect their derivate CNF-based textile fabrics. Here, the production and thermoelectric (TE) properties of cotton woven fabrics (CWFs) functionalized with aqueous inks made from different amounts of pyrolytically stripped (PS) Pyrograf® III PR 25 PS XT CNFs via dip-coating method are presented. At 30 °C and depending on the CNF content used in the dispersions, the modified textiles show electrical conductivities (σ) varying between ~5 and 23 S m-1 with a constant negative Seebeck coefficient (S) of -1.1 µVK-1. Moreover, unlike the as-received CNFs, the functionalized textiles present an increase in their σ from 30 °C to 100 °C (dσ/dT > 0), explained by the 3D variable range hopping (VRH) model as the charge carriers going beyond an aleatory network of potential wells by thermally activated hopping. However, as it happens with the CNFs, the dip-coated textiles show an increment in their S with temperature (dS/dT > 0) successfully fitted with the model proposed for some doped multiwall carbon nanotube (MWCNT) mats. All these results are presented with the aim of discerning the authentic function of this type of pyrolytically stripped Pyrograf® III CNFs on the thermoelectric properties of their derived textiles.
RESUMO
Integration of single-wall carbon nanotubes (SWCNTs) in the form of fabriclike sheets or other preformed assemblies (films, fibers, etc.) simplifies their handling and allows for composites with higher nanotube contents, which is needed to better exploit their outstanding properties and achieve multifunctional materials with improved performance. Here, we show the development of p-type SWCNT-thermoplastic polyurethane (TPU) fabric materials with a wide range of SWCNT contents (from 5 to 90 wt %) by employing a one-step filtration method using a suspension of SWCNTs in a TPU solvent/nonsolvent mixture. The mechanical and thermoelectric (TE) properties of these SWCNT-TPU nanocomposites were tailored by varying the SWCNT/TPU wt % ratio, achieving significant advantages relative to the pristine SWCNT buckypaper (BP) sheets in terms of strength and stretchability. In particular, the SWCNT-TPU nanocomposite with a 50/50 wt % ratio composition (equivalent to 15 vol % of SWCNTs) shows a power factor (PF) of 57 µW m-1 K-2, slightly higher compared to the PF of the SWCNT BP prepared under the same conditions (54 µW m-1 K-2), while its mechanical properties significantly increased (e.g., â¼7-, 25-, and 250-fold improvements in stiffness, strength, and tensile toughness, respectively). These results represent a significant step toward the development of easy-to-process self-supporting and stretchable materials with robust mechanical properties for flexible thermoelectric devices.
RESUMO
The temperature dependent electrical conductivity σ (T) and thermopower (Seebeck coefficient) S (T) from 303.15 K (30 °C) to 373.15 K (100 °C) of an as-received commercial n-type vapour grown carbon nanofibre (CNF) powder and its melt-mixed polypropylene (PP) composite with 5 wt.% of CNFs have been analysed. At 30 °C, the σ and S of the CNF powder are ~136 S m-1 and -5.1 µV K-1, respectively, whereas its PP/CNF composite showed lower conductivities and less negative S-values of ~15 S m-1 and -3.4 µV K-1, respectively. The σ (T) of both samples presents a dσ/dT < 0 character described by the 3D variable range hopping (VRH) model. In contrast, their S (T) shows a dS/dT > 0 character, also observed in some doped multiwall carbon nanotube (MWCNT) mats with nonlinear thermopower behaviour, and explained here from the contribution of impurities in the CNF structure such as oxygen and sulphur, which cause sharply varying and localized states at approximately 0.09 eV above their Fermi energy level (EF).
RESUMO
The continued focus on improving the quality of human life has encouraged the development of increasingly efficient, durable, and cost-effective products in healthcare. Over the last decade, there has been substantial development in the field of technical and interactive textiles that combine expertise in electronics, biology, chemistry, and physics. Most recently, the creation of textile biosensors capable of quantifying biometric data in biological fluids is being studied, to detect a specific disease or the physical condition of an individual. The ultimate goal is to provide access to medical diagnosis anytime and anywhere. Presently, alcohol is considered the most commonly used addictive substance worldwide, being one of the main causes of death in road accidents. Thus, it is important to think of solutions capable of minimizing this public health problem. Alcohol biosensors constitute an excellent tool to aid at improving road safety. Hence, this review explores concepts about alcohol biomarkers, the composition of human sweat and the correlation between alcohol and blood. Different components and requirements of a biosensor are reviewed, along with the electrochemical techniques to evaluate its performance, in addition to construction techniques of textile-based biosensors. Special attention is given to the determination of biomarkers that must be low cost and fast, so the use of biomimetic materials to recognize and detect the target analyte is turning into an attractive option to improve electrochemical behavior.