Efficient and high-throughput ablation of platinum using high-repetition rate radially and azimuthally polarized sub-picosecond laser pulses.

A highly productive ablation process of 100 nm thick platinum films with a processed area rate of up to 378 cm2/min is presented using radially and azimuthally polarized laser beams. This was achieved by developing a laser amplifier generating 757 fs long laser pulses at a maximum average power of 390 W and a repetition rate of 10.6 MHz with adjustable polarization states, i.e., linear, radial, and azimuthal polarization on the work piece. The pulse train emitted from the laser was synchronized to a custom-designed polygon scanner and directed into an application machine.

Yb:YAG single-crystal fiber amplifiers for picosecond lasers using the divided pulse amplification technique.

A two-stage master-oscillator power-amplifier (MOPA) system based on Yb:YAG single-crystal-fiber (SCF) technology and designed for high peak power is studied to significantly increase the pulse energy of a low-power picosecond laser. The first SCF amplifier has been designed for high gain. Using a gain medium optimized in terms of doping concentration and length, an optical gain of 32 dB has been demonstrated. The second amplifier stage designed for high energy using the divided pulse technique allows us to generate a recombined output pulse energy of 2 mJ at 12.5 kHz with a pulse duration of 6 ps corresponding to a peak power of 320 MW. Average powers ranging from 25 to 55 W with repetition rates varying from 12.5 to 500 kHz have been demonstrated.

160 W 800 fs Yb:YAG single crystal fiber amplifier without CPA.

We demonstrate a compact and simple two-stage Yb:YAG single crystal fiber amplifier which delivers 160 W average power, 800 fs pulses without chirped pulse amplification. This is the highest average power of femtosecond laser based on SCF. Additionally, we demonstrate the highest small signal gain of 32.5 dB from the SCF in the first stage and the highest extraction efficiency of 42% in the second stage. The excellent performance of the second stage was obtained using the bidirectional pumping scheme, which is applied to SCF for the first time.

High-power Yb:YAG single-crystal fiber amplifiers for femtosecond lasers in cylindrical polarization.

We demonstrate a three-stage diode-pumped Yb:YAG single-crystal-fiber amplifier to generate femtosecond pulses at high average powers with linear or cylindrical (i.e., radial or azimuthal) polarization. At a repetition rate of 20 MHz, 750-fs pulses were obtained at an average power of 85 W in cylindrical polarization and at 100 W in linear polarization. The report includes investigations on the use of Yb:YAG single-crystal fibers with different length/doping ratio and the zero-phonon pumping at a wavelength of 969 nm in order to optimize the performance.