Impact wave monitoring in soil using a dynamic fiber sensor based on stimulated brillouin scattering.

The impact wave response of soil due to a ball drop is monitored on a 30.5 cm by 30.5 cm square soil box using a fiber sensor with dynamic strain sensing capability. The experiments are conducted in real time using a simple one-laser one-modulator configuration with stimulated Brillouin scattering. The embedded BOTDA sensor grid successfully monitored the distribution and evolution of the inner strains of a sand bed during a mass impact on its surface. The measurement of the distributed dynamic strains was possible in several milliseconds and with 1 cm actual location resolution. This paper presents a time-domain signal analysis utilized for determining the dynamic strains in embedded fiber sensor. The results demonstrate the method to be a promising one for detection of subsurface vibration and movement in geotechnical Structure Health Monitoring (SHM).

Subsurface event detection and classification using Wireless Signal Networks.

Subsurface environment sensing and monitoring applications such as detection of water intrusion or a landslide, which could significantly change the physical properties of the host soil, can be accomplished using a novel concept, Wireless Signal Networks (WSiNs). The wireless signal networks take advantage of the variations of radio signal strength on the distributed underground sensor nodes of WSiNs to monitor and characterize the sensed area. To characterize subsurface environments for event detection and classification, this paper provides a detailed list and experimental data of soil properties on how radio propagation is affected by soil properties in subsurface communication environments. Experiments demonstrated that calibrated wireless signal strength variations can be used as indicators to sense changes in the subsurface environment. The concept of WSiNs for the subsurface event detection is evaluated with applications such as detection of water intrusion, relative density change, and relative motion using actual underground sensor nodes. To classify geo-events using the measured signal strength as a main indicator of geo-events, we propose a window-based minimum distance classifier based on Bayesian decision theory. The window-based classifier for wireless signal networks has two steps: event detection and event classification. With the event detection, the window-based classifier classifies geo-events on the event occurring regions that are called a classification window. The proposed window-based classification method is evaluated with a water leakage experiment in which the data has been measured in laboratory experiments. In these experiments, the proposed detection and classification method based on wireless signal network can detect and classify subsurface events.

Distributed fiber sensor based on modulated pulse base reflection and Brillouin gain spectrum analysis.

In recent years, several distributed sensor systems based on stimulated Brillouin scattering in optical fibers have been proposed [J. Intell. Mater. Syst. Struct.10, 340 (1999); Proc. SPIE5855, 555 (2005)]. We propose a simpler scheme based on fiber-end reflection and Brillouin gain spectrum analysis. In this setup, only one optical source is necessary to provide both the pump and the probe wave; the latter is provided by the modulated pulse base. First, the physical mechanisms for two different Brillouin scattering processes in our sensor system are analyzed and an approximate theory model is proposed. In addition, it is demonstrated that the simple system configuration allows simultaneous acquisition of the time-domain and the frequency-domain information. It is experimentally demonstrated that this configuration is effective for strain measurements and could as well be applied to temperature monitoring.

Electrically induced displacement transport of immiscible oil in saline sediments.

Electrically assisted mitigation of coastal sediment oil pollution was simulated in floor-scale laboratory experiments using light crude oil and saline water at approximately 1/10 oil/water (O/W) mass ratio in pore fluid. The mass transport of the immiscible liquid phases was induced under constant direct current density of 2A/m(2), without water flooding. The transient pore water pressures (PWP) and the voltage differences (V) at and in between consecutive ports lined along the test specimen cell were measured over 90days. The oil phase transport occurred towards the anode half of the test specimen where the O/W volume ratio increased by 50% over its initial value within that half-length of the specimen. In contrast, the O/W ratio decreased within the cathode side half of the specimen. During this time, the PWP decreased systematically at the anode side with oil bank accumulation. PWP increased at the cathode side of the specimen, signaling increased concentration of water there as it replaced oil in the pore space. Electrically induced transport of the non-polar, non-conductive oil was accomplished in the opposing direction of flow by displacement in absence of viscous coupling of oil-water phases.

Influence of electrolyte and voltage on the direct current enhanced transport of iron nanoparticles in clay.

Zero valent iron nanoparticles (nZVI) transport for soil and groundwater remediation is slowed down or halted by aggregation or fast depletion in the soil pores. Direct electric current can enhance the transport of nZVI in low permeability soils. However operational factors, including pH, oxidation-reduction potential (ORP), voltage and ionic strength of the electrolyte can play an important role in the treatment effectiveness. Experiments were conducted to enhance polymer coated nZVI mobility in a model low permeability soil medium (kaolin clay) using low direct current. Different electrolytes of varying ionic strengths and initial pH and high nZVI concentrations were applied. Results showed that the nZVI transport is enhanced by direct current, even considering concentrations typical of field application that favor nanoparticle aggregation. However, the factors considered (pH, ORP, voltage and electrolyte) failed to explain the iron concentration variation. The electrolyte and its ionic strength proved to be significant for pH and ORP measured during the experiments, and therefore will affect aggregation and fast oxidation of the particles.

Role of DDL processes during electrolytic reduction of Cu(II) in a low oxygen environment.

Heavy metals typically accumulate in reduced bottom sediments after being discharged into waterways by industrial and municipal processes. A laboratory experiment was conducted in order to determine if abundance of clay in the bottom sediments of a Cu-contaminated aqueous ecosystem could enhance electrolytic reduction of the heavy metal. Cu(NO3)2 · 2.5H2O was added to simulate a moderately contaminated system with 650 µg Cu/ml kaolinite clay-water slurry. A constant electrical potential of 1.0 V/cm was applied across platinum wire electrodes inserted into the continuously stirred system for four days while the system ORP(2) was monitored and periodic sub-samples were taken for analysis. The electrical as well as the chemical results indicate that the quantity of Cu(II) being reduced to Cu(I), especially within the aqueous phase, is increased within the first 48 h of experimentation by the presence of kaolinite clay up to 0.05 mg clay/l slurry.

Delivery and activation of nano-iron by DC electric field.

This study demonstrates that by integrating electrokinetics with nanotechnology, the transport of nano-particles can be electrokinetically enhanced for subsurface remediation of tight clay soils where transport time and process efficiency may be an issue. Polymer coated dispersed nano-iron developed at Lehigh University, were used in the experiments reported here. The particles possessed positive zeta-potential below pH 8.3 and remained suspended in solution rather than settling or agglomerating over time as it may occur with bare nano-iron. The injection of nano-iron particles in the lab tests showed a positive shift in the oxidation-reduction potential (ORP) where the effectiveness of nano-iron as an environmental catalyst was demonstrated. The presence of nano-iron and applied electric field together pushed the system ORP to higher positive values than the electrokinetic effects or nano-iron alone. The diffusion of nano-iron without the electrical field showed no activation of the iron, as indicated by little or no change in the ORP. These results showed that nano-iron was both transported and activated by the applied electrical field. The enhanced reaction was analyzed in terms of possible Faradaic processes in clay diffuse double layer, DDL, in presence of electric field.

Enhanced reduction of Cr(VI) by direct electric current in a contaminated clay.

The probable relation between diffuse double-layer processes and redox reactions that enhance degradation or conversion of contaminants under an applied electric field were examined in a clay medium. Kaolinite clay, precontaminated with hexavalent chromium, was the test soil medium. Analyte, containing ferrous iron, was transported through the kaolinite clay using direct electric current. The Cr(VI) reduction to Cr(III) was followed by measuring the soil redox potential and pH at discrete locations in the clay bed. The post-test distribution of Cr showed significantly more Cr(III) than Cr(VI) at low to slightly acidic pH distribution (2 < pH < 6) in clay. The stoichiometric analyses of measured chromium and iron species concentrations versus the measured redox potentials were compared to Nernst equation predictions of an equivalent aqueous system. An average of +0.37 V shift was measured from the linear Nernstian prediction of cell potential. The applied electric field appeared to provide additional "cathodic current" to drive forth the redox reactions. The redox potential shift was explained by possible overpotential development at the clay-water interfaces due to double-layer polarization under the applied field.