Non-target liquid chromatography high-resolution mass spectrometry screening to prioritize unregulated micropollutants that persist through domestic wastewater treatment.

Efforts to regulate and monitor emerging contaminants are insufficient because new chemicals are continually brought to market, and many are unregulated and potentially harmful. Domestic wastewater treatment plants are not designed to remove micropollutants and are important sources of emerging contaminants in the aquatic environment. In this study, non-target screening, an unbiased method for analyzing compounds without prior information, was used to identify compounds that may be emitted in wastewater treatment plant effluent and should be monitored. Nine wastewater treatment plants using different treatment methods were studied, and a non-target screening data-processing method was used. The frequencies at which the contaminants were detected and contaminant persistence through the treatment processes were considered, and then the contaminants were prioritized. The predicted no-effect concentration of each prioritized contaminant was used to determine whether further analysis and monitoring of the contaminant was necessary. Quantitative analyses of five compounds (amantadine, atenolol, benzotriazole, diphenhydramine, and sulpiride) were performed using reference standards. Probable molecular formulae and structures were proposed for 17 contaminants, and the risks posed by the contaminants were estimated using predicted no-effect concentrations. The results provide valuable insights into how unregulated micropollutants can be identified and prioritized for monitoring in future studies.

Use of the subfascial plane in debulking an extensive lower extremity plexiform neurofibroma: A case report.

INTRODUCTION: Plexiform neurofibromas (PNs) are characterized by their diffuse masses with tortuous expansion along nerve branches. While surgery is the primary management for PNs, the optimal surgical approach remains unestablished. CASE PRESENTATION: A 35-year-old lady presented with a large hanging mass covering the medial aspect of the thigh and the leg. It caused discomfort, disfigurement, and occasional pain. The patient was planned for the debulking surgery under spinal anesthesia. Incisions were given on the normal-looking skin adjacent to the mass, through the skin layers, subcutaneous tissue and deep fascia until the muscles were seen. The mass was then approached and elevated in the subfascial plane (relatively avascular). Large, dilated, dense tortuous vessels could be seen in the suprafascial and subcutaneous planes. Maximum area that could be removed was marked and excised. The normal contour of the left lower extremity was restored close to achieving a thigh and a leg lift. DISCUSSION: PNs pose surgical challenges due to their vascularity and difficult locations. The subfascial debulking approach presented in the case aims to reduce intraoperative hemorrhage by avoiding highly vascular areas and preventing entry into blood sinuses within the neurofibromatous tissue. This technique also minimizes the risk of inadvertent injury to nearby neurovascular structures. CONCLUSION: The proposed subfascial approach, significantly reduces intraoperative hemorrhage during the debulking of a PN.

Tent screws: Predictable guided bone regeneration.

Bone regeneration of large maxillary and mandibular alveolar ridge defects is clinically challenging. Various techniques have been described for the reconstruction of these deficiencies before implant placement. The tent screw-pole technique is one of the effective methods available for clinicians to perform the predictable functional and esthetic reconstruction. The aim of this prospective report was to evaluate clinical and three-dimensional radiographic analyses of two patients treated with xenograft and particulate autogenous bone using tenting screws for regeneration of compromised partial edentulous ridges.

Comparison between all-on-four and all-on-six treatment concepts on stress distribution for full-mouth rehabilitation using three-dimensional finite element analysis: A biomechanical study.

Purpose: The current study intended to provide a comparison of biomechanical behaviors of two different treatment concepts for full-mouth rehabilitation with dental implants placed according to the "All-on-four" concept and "All-on-six" concept with analysis of the stress patterns of the implant support system using three-dimensional finite element analysis (FEA). Materials and Methods: The edentulous mandible was treated with two different implant designs. "All-on-Four" implant placement concept was used in Model 1 with two central axial implants and two distally tilted implants at 17° and in Model 2, "All-on-Six" concept was applied with six vertically placed implants. Individual vertical and horizontal load of 100 N and oblique load of 141 N at 45° was applied to all implants. To evaluate and compare the results in terms of maximum principal stress, we used FEA. Results: All-on-six showed smaller maximum principal stress values on the cortical bone and implants. However, maximum principal stress values obtained on trabecular bone was smaller in the All-on-four design for vertical and horizontal loading conditions. Conclusions: The All-on-six approach showed more favorable biomechanical behavior.

Palatal bone block: A predictable bone augmentation technique for restricted maxillary defect.

Bone grafting for implant dentistry depends on bone quality, quantity, and biological principles for good outcome. Autogenous bone as donor remains the gold standard among all the available materials. However, it carries unpredictable morbidity and need for different surgical sites. In our report, we describe a simplified approach in bone augmentation for restricted maxillary atrophic defect within the same surgical site as a harvesting site. The method can be an alternative for different intraoral surgical harvesting sites. The patient's left maxillary central incisor before treatment had a large bony defect which was reconstructed though single site approach of augmentation. The implant-supported restoration with healthy periodontium around even after 2 years of review looks promising. The approach can be an alternative for different intraoral surgical sites.

Specialized pro-resolving lipid mediators regulate inflammatory macrophages: A paradigm shift from antibiotics to immunotherapy for mitigating COVID-19 pandemic.

The most severe clinical manifestations of the horrifying COVID-19 disease, that claimed millions of lives during the pandemic time, were Acute respiratory distress syndrome (ARDS), Coagulopathies, septic shock leading eventually to death. ARDS was a consequence of Cytokine storm. The viral SARS-COV2infection lead to avalanche of cytokines and eicosanoids causing "cytokine storm" and "eicosanoid storm." Cytokine storm is one of the macrophage-derived inflammatory responses triggered by binding of virus particles to ACE2 receptors of alveolar macrophages, arise mainly due to over production of various pro-inflammatory mediators like cytokines, e.g., interleukin (IL)-1, IL-2, and tumor necrosis factor (TNF)- α, causing pulmonary edema, acute respiratory distress, and multi-organ failure. Cytokine storm was regarded as the predictor of severity of the disease and was deemed one of the causes of the high mortality rates due to the COVID-19. The basis of cytokine storm is imbalanced switching between an inflammation increasing - pro-inflammatory (M1) and an inflammation regulating-anti-inflammatory (M2) forms of alveolar macrophages which further deteriorates if opportunistic secondary bacterial infections prevail in the lungs. Lack of sufficient knowledge regarding the virus and its influence on co-morbidities, clinical treatment of the diseases included exorbitant use of antibiotics to mitigate secondary bacterial infections, which led to the unwarranted development of multidrug resistance (MDR) among the population across the globe. Antimicrobial resistance (AMR) needs to be addressed from various perspectives as it may deprive future generations of the basic health immunity. Specialized pro-resolving mediators (SPMs) are generated from the stereoselective enzymatic conversions of essential fatty acids that serve as immune resolvents in controlling acute inflammatory responses. SPMs facilitate the clearance of injured tissue and cell debris, the removal of pathogens, and augment the concentration of anti-inflammatory lipid mediators. The SPMs, e.g., lipoxins, protectins, and resolvins have been implicated in exerting inhibitory influence on with cytokine storm. Experimental evidence suggests that SPMS lower antibiotic requirement. Therefore, in this review potential roles of SPMs in enhancing macrophage polarization, triggering immunological functions, hastening inflammation resolution, subsiding cytokine storm and decreasing antibiotic requirement that can reduce AMR load are discussed.

Antibiotic adjuvants: synergistic tool to combat multi-drug resistant pathogens.

The rise of multi-drug resistant (MDR) pathogens poses a significant challenge to the field of infectious disease treatment. To overcome this problem, novel strategies are being explored to enhance the effectiveness of antibiotics. Antibiotic adjuvants have emerged as a promising approach to combat MDR pathogens by acting synergistically with antibiotics. This review focuses on the role of antibiotic adjuvants as a synergistic tool in the fight against MDR pathogens. Adjuvants refer to compounds or agents that enhance the activity of antibiotics, either by potentiating their effects or by targeting the mechanisms of antibiotic resistance. The utilization of antibiotic adjuvants offers several advantages. Firstly, they can restore the effectiveness of existing antibiotics against resistant strains. Adjuvants can inhibit the mechanisms that confer resistance, making the pathogens susceptible to the action of antibiotics. Secondly, adjuvants can enhance the activity of antibiotics by improving their penetration into bacterial cells, increasing their stability, or inhibiting efflux pumps that expel antibiotics from bacterial cells. Various types of antibiotic adjuvants have been investigated, including efflux pump inhibitors, resistance-modifying agents, and compounds that disrupt bacterial biofilms. These adjuvants can act synergistically with antibiotics, resulting in increased antibacterial activity and overcoming resistance mechanisms. In conclusion, antibiotic adjuvants have the potential to revolutionize the treatment of MDR pathogens. By enhancing the efficacy of antibiotics, adjuvants offer a promising strategy to combat the growing threat of antibiotic resistance. Further research and development in this field are crucial to harness the full potential of antibiotic adjuvants and bring them closer to clinical application.

Sustainable applications of polyhydroxyalkanoates in various fields: A critical review.

PHA is one of the most promising candidates in bio-polymer family which is biodegradable and environment-friendly in nature. In recent years, it has been applied as a biodegradable alternative for petroleum-based plastic across different domains. In literature, several research groups have scrutinised the biocompatibility and biodegradability of PHA in both in vivo settings as well as in in vitro conditions. Microbial yield polyhydroxyalkanoates (PHAs) are promoted at present as biodegradable plastics. On the other hand, only a limited number of products is being commercially manufactured out of PHAs (e.g., bottles). A succession of microbes (prokaryotes in addition to eukaryotes) has been identified as potential candidates that can disintegrate PHAs. These materials have been successfully employed in packaging industry, medical devices and implants, moulded goods, paper coatings, adhesives, performance additives, mulch films, non-woven fabrics, etc. The present paper reviews and focuses on the potential applications of PHA and its derivatives in different industries.

Pink gingival restoration: An acceptable treatment for complex ridge defects.

Complex implant prosthetic reconstruction poses several challenges. The lost anatomy of periodontium due to trauma or long-standing missing teeth, especially in esthetic area, requires several surgical visits for recovery. The augmentation procedures are technique sensitive and unpredictable and need long commitment from the patient. They are time-consuming and expensive, and patients are often unwilling. The alternative for anatomically deficient partial edentulous sites could be prosthetic gingival restoration. They help in re-establishing natural contours, interproximal papilla, and further eliminating complex procedures. The other advantage is perfect horizontal and vertical transition between the prosthesis and adjacent tissues. This article describes two cases of completed gingival prosthetic prosthesis which corrected the missing architectures around lost teeth. It was well accepted by the patients and can be an alternative for unpredictable regenerative procedures.

An interdisciplinary approach for reconstruction of worn dentition.

Complete tooth wear dentition is multifactorial and has challenges with diagnosis and etiology. Their rehabilitation often requires orthognathic surgery, orthodontics, periodontal surgery, and prosthodontic guidelines for occlusion with harmonious facial and dental esthetics. A patient needs a multidisciplinary approach with systematic analysis to formulate evidence-based approach to improve function and esthetics. Contemporary periodontal therapy also encompasses esthetic treatment where needs are frequently associated with changes in tooth size, shape, proportion, and balance that can adversely affect smile appearance. The article provides an evidence-based guideline for reconstruction of a worn dentition. The completed work includes crown lengthening, provisionalization, socket shield technique, oral implants, and gain in lost vertical dimension with occlusion correction and minimally invasive prosthetic restorations.

Natural teeth and implant-retained prosthesis in treated periodontitis subjects.

History of periodontal disease is a risk factor for the development of peri-implantitis. Implant treatment in susceptible patients should be followed by adequate periodontal treatment and stringent supportive programs. The assessment of the patient needs to be carefully evaluated before the procedure for implants. The risk associated with the sites to be treated requires evaluation with regular visits. The completion of treatment will still require committed follow-up visits with checks for pockets, bone loss, and plaque scores around implant-retained prosthesis as well as complete dentition. In our report, we describe in detail the reconstruction of lost dentition with implants in treated periodontitis subjects. The patients are still being followed with regular recall programs.

Chilaiditi's syndrome in a patient under long-term antidepressants- A case report.

Introduction: Chilaiditi's sign is a rare radiological sign characterized by interposition of the colon between diaphragm and liver. It is called Chilaiditi's syndrome if the patient presents with associated symptoms. Its diagnosis is incidental and can be confused with other acute conditions. Case presentation: This is a case of 85-year-old gentleman who presented with complaints of epigastric pain and vomiting. The patient had a history of long-term antidepressant medications. X-ray of chest and abdomen revealed presence of bowel loops under the diaphragm. CT scan helped confirm the diagnosis of Chilaiditi's sign. Discussion: Chilaiditi's sign has a low prevalence on chest and abdominal X-rays. Common associated symptoms include abdominal pain, nausea, vomiting and constipation. It can be misdiagnosed as bowel perforation and can lead to unnecessary surgical interventions. Symptomatic patients are managed conservatively. Conclusion: Chilaiditi's syndrome is a rare radiological entity and should be diagnosed carefully to avoid unwanted surgical procedures.

Biogenic Phytochemicals Modulating Obesity: From Molecular Mechanism to Preventive and Therapeutic Approaches.

The incidence of obesity and over bodyweight is emerging as a major health concern. Obesity is a complex metabolic disease with multiple pathophysiological clinical conditions as comorbidities are associated with obesity such as diabetes, hypertension, cardiovascular disorders, sleep apnea, osteoarthritis, some cancers, and inflammation-based clinical conditions. In obese individuals, adipocyte cells increased the expression of leptin, angiotensin, adipocytokines, plasminogen activators, and C-reactive protein. Currently, options for treatment and lifestyle behaviors interventions are limited, and keeping a healthy lifestyle is challenging. Various types of phytochemicals have been investigated for antiobesity potential. Here, we discuss pathophysiology and signaling pathways in obesity, epigenetic regulations, regulatory mechanism, functional ingredients in natural antiobesity products, and therapeutic application of phytochemicals in obesity.

A new era of Nano!!! Comparative evaluation of ganglioside polymeric nanoparticle coated satranidazole gel and 1% metronidazole gel for the treatment of periodontitis.

Background: The present study was intended to comparatively assess the efficacy of ganglioside polymeric nanoparticle-coated 0.25% satranidazole-loaded nanoparticles in gel form with that of the commercially available 1% metronidazole gel as a local drug delivery (LDD) agent for the treatment of periodontal pockets. Materials and Methods: A split-mouth randomized clinical trial was carried out in 46 chronic periodontitis patients with probing pocket depth (PPD) ≥4 mm or clinical attachment loss greater than 3 mm on both quadrants of the same arch. Full-mouth scaling and root planing (SRP) was performed for all the patients followed by application of 0.25% satranidazole-loaded nanoparticles in gel form on one site (Group 1) and commercially available 1% metronidazole gel on another site (Group 2). Clinical parameters (gingival index, plaque index, PPD, clinical attachment level gain, and bleeding on probing) and microbiological analysis of the subgingival plaque samples were performed and assessed at baseline, after SRP, 21st day, and 90th day post treatment. Unpaired "t"-test and ANOVA tests were used for intergroup and intragroup comparison of recorded parameters. Results: The results showed that the satranidazole-loaded nanoparticle group as an adjunct to SRP in chronic periodontitis showed a statistically significant improvement in all the clinical parameters and a fewer relapse of microbial flora in comparison with the metronidazole group as an LDD agent. Conclusion: The present study depicted that both the LDD agents showed an effective improvement of clinical as well as microbiological parameters, but the satranidazole group consistently produced better results than the metronidazole group and hence has a promising future as an LDD agent in treating periodontal pockets.

One-piece implants: Careful approach for complex rehabilitation.

It is understood that one-piece implant design is a stronger concept as there is no connection between implant and abutment. The absence of a microgap can lead to minimal peri-implant bone loss. Furthermore, there is a reduction of mechanical complications such as screw loosening and abutment fractures. These implants can be immediately placed and can be put through instant function because of their high cortical stabilization. This immediate function protocol has advantages over two-stage surgical placement. Other benefits are fewer surgical appointments, reduced treatment time, and minimal trauma. It is suggested that one-piece implant can be an alternative to conventional implants for edentulous arches where there is a resorbed bone in width and height. Initially, one-piece implants were used as transitional or provisional implants. However, because of biological osseointegration, their removal often became difficult. Several manufacturers obtained approval for its use in defined situations. Proper treatment planning avoided comorbidity associated with augmentation procedures and acceptable esthetic result was achieved.

Bioconversion of waste (water)/residues to bioplastics- A circular bioeconomy approach.

Research insight into the technical challenges of bioplastics production has revealed their confoundedness in their niche markets and struggles to enter the mainstream. There is an increasing problem of waste disposal and high cost of pure substrates in polyhydroxyalkanoates (PHA) production. This has led to the future need of upgrading the waste streams from different industries into the role of feedstocks for production of PHA. The review covers the latest developments in using wastes and surplus materials for PHA production. In addition to inexpensive carbon sources, efficient upstream and downstream processes and recycling of waste streams within the process are required to maintain the circularity in the entire process. A view on the link between circular bioeconomy and PHA production process covering the techno-economic, life cycle assessment and environmental aspects has also been provided. Furthermore, the future perspectives related to the topic have also been discussed.