Dynamic Phase Transformations of Prussian Blue Analogue Crystals in Hydrotherms.

Prussian blue analogue (PBA)/metal-organic frameworks (MOFs) are multifunctional precursors for the synthesis of metal/metal compounds, carbon, and their derived composites (P/MDCs) in chemical, medical, energy, and other applications. P/MDCs combine the advantages of both the high specific surface area of PBA/MOF and the electronic conductivity of metal compound/carbon. Although the calcination under different atmospheres has been extensively studied, the transformation mechanism of PBA/MOF under hydrothermal conditions remains unclear. The qualitative preparation of P/MDCs in hydrothermal conditions remains a challenge. Here, we select PBA to construct a machine-learning model and measure its hydrothermal phase diagram. The architecture-activity relationship of substances among nine parameters was analyzed for the hydrothermal phase transformation of PBA. Excitingly, we established a universal qualitative model to accurately fabricate 31 PBA derivates. Additionally, we performed three-dimensional reconstructed transmission electron microscopy, X-ray absorption fine structure spectroscopy, ultraviolet photoelectron spectroscopy, in situ X-ray powder diffraction, and theoretical calculation to analyze the advantages of hydrothermal derivatives in the oxygen evolution reaction and clarify their reaction mechanisms. We uncover the unified principles of the hydrothermal phase transformation of PBA, and we expect to guide the design for a wide range of composites.

In Situ Phosphorization for Constructing Ni5P2-Ni Heterostructure Derived from Bimetallic MOF for Li-S Batteries.

Heterostructured materials commonly consist of bifunctions due to the different ingredients. For host material in the sulfur cathode of lithium-sulfur (Li-S) batteries, the chemical adsorption and catalytic activity for lithium polysulfides (LiPS) are important. This work obtains a Ni5P2-Ni nanoparticle (Ni5P2-NiNPs) heterostructure through a confined self-reduction method followed by an in situ phosphorization process using Al/Ni-MOF as precursors. The Ni5P2-Ni heterostructure not only has strong chemical adsorption, but also can effectively catalyze LiPS conversion. Furthermore, the synthetic route can keep Ni5P2-NiNPs inside of the nanocomposites, which have structural stability, high conductivity, and efficient adsorption/catalysis in LiPS conversion. These advantages make the assembled Li-S battery deliver a reversible specific capacity of 619.7 mAh g- 1 at 0.5 C after 200 cycles. The in situ ultraviolet-visible technique proves the catalytic effect of Ni5P2-Ni heterostructure on LiPS conversion during the discharge process.

Biomimetic Mineralization Synthesis of Flower-Like Cobalt Selenide/Reduced Graphene Oxide for Improved Electrochemical Deionization.

Rationally and precisely tuning the composition and structure of materials is a viable strategy to improve electrochemical deionization (EDI) performances, which yet faces enormous challenges. Herein, an eco-friendly biomimetic mineralization synthetic strategy is developed to synthesize the flower-like cobalt selenide/reduced graphene oxide (Bio-CoSe2 /rGO) composites and used as advanced sodium ion adsorption electrodes. Benefiting from the slow and controllable reaction kinetics provided by the biomimetic mineralization process, the flower-like CoSe2 is uniformly constructed in the rGO, which is endowed with robust architecture, substantial adsorption sites and rapid charge/ion transport. The Bio-CoSe2 /rGO electrode yields the maximum salt adsorption capacity and salt adsorption rate of 56.3 mg g-1 and 5.6 mg g-1 min-1 respectively, and 92.5% capacity retention after 60 cycles. These results overmatch the pristine CoSe2 and irregular granular CoSe2 /rGO synthesized by a hydrothermal method, proving the structural superiority of the Bio-CoSe2 /rGO composites. Furthermore, the in-depth adsorption kinetics study indicates the chemisorption nature of sodium ion adsorption. The structures of the Bio-CoSe2 /rGO composites after long term EDI cycles are intensively studied to unveil the mechanism behind such superior EDI performances. This study offers one effective method for constructing advanced EDI electrodes, and enriches the application of the biomimetic mineralization synthetic strategy.

3D Printed MXene-Based Wire Strain Sensors with Enhanced Sensitivity and Anisotropy.

Stretchable strain sensors play a crucial role in intelligent wearable systems, serving as the interface between humans and environment by translating mechanical strains into electrical signals. Traditional fiber strain sensors with intrinsic uniform axial strain distribution face challenges in achieving high sensitivity and anisotropy. Moreover, existing micro/nano-structure designs often compromise stretchability and durability. To address these challenges, a novel approach of using 3D printing to fabricate MXene-based flexible sensors with tunable micro and macrostructures.  Poly(tetrafluoroethylene) (PTFE) as a pore-inducing agent is added into 3D printable inks to achieve controllable microstructural modifications. In addition to microstructure tuning, 3D printing is employed for macrostructural design modifications, guided by finite element modeling (FEM) simulations. As a result, the 3D printed sensors exhibit heightened sensitivity and anisotropy, making them suitable for tracking static and dynamic displacement changes. The proposed approach presents an efficient and economically viable solution for standardized large-scale production of advanced wire strain sensors.

Recent Progress in 2D Metal-Organic Framework-Related Materials.

2D metal-organic frameworks-based (2D MOF-related) materials benefit from variable topological structures, plentiful open active sites, and high specific surface areas, demonstrating promising applications in gas storage, adsorption and separation, energy conversion, and other domains. In recent years, researchers have innovatively designed multiple strategies to avoid the adverse effects of conventional methods on the synthesis of high-quality 2D MOFs. This review focuses on the latest advances in creative synthesis techniques for 2D MOF-related materials from both the top-down and bottom-up perspectives. Subsequently, the strategies are categorized and summarized for synthesizing 2D MOF-related composites and their derivatives. Finally, the current challenges are highlighted faced by 2D MOF-related materials and some targeted recommendations are put forward to inspire researchers to investigate more effective synthesis methods.

Double-Shelled Open Hollow Metal-Organic Frameworks for Efficient Aqueous Zn-Ion Batteries.

Multi-shelled hollow metal-organic frameworks (MH-MOFs) are highly promising as electrode materials due to their impressive surface area and efficient mass transfer capabilities. However, the fabrication of MH-MOFs has remained a formidable challenge. In this study, two types of double-shelled open hollow Prussian blue analogues, one with divalent iron (DHPBA-Fe(II)) and the other with trivalent iron (DHPBA-Fe(III)), through an innovative inner-outer growth strategy are successfully developed. The growth mechanism is found to involve lattice matching growth and ligand exchange processes. Subsequently, DHPBA-Fe(II) and DHPBA-Fe(III) are employed as cathodes in aqueous Zn-ion batteries. Significantly, DHPBA-Fe(II) demonstrated exceptional performance, exhibiting a capacity of 92.5 mAh g-1 at 1 A g-1, and maintaining remarkable stability over an astounding 10 000 cycles. This research is poised to catalyze further exploration into the fabrication techniques of MH-MOFs and offer fresh insights into the intricate interplay between electronic structure and battery performance.

Conductive Metal-Organic Framework Grown on the Nickel-Based Hydroxide to Realize High-Performance Electrochemical Glucose Sensing.

Glucose holds significant importance in disease diagnosis as well as beverage quality monitoring. The high-efficiency electrochemical sensor plays a crucial role in the electrochemical conversion technology. Ni(OH)2 nanosheets are provided with high specific surface area and redox activity that are widely used in electrochemistry. Conductive metal-organic frameworks (cMOFs) perfectly combine the structural controllability of organic materials with the long-range ordering of inorganic materials that possess the characteristic of high electron mobility. Based on the above considerations, the combination of Ni(OH)2 and Ni-HHTP (HHTP=2,3,6,7,10,11-hexahydroxytriphenylene) as an electrode modification material is designed to enhance electrochemical performance. In this work, to improve glucose detection, a sequence of Ni(OH)2@NiCo-HHTP and NiM-LDH@Ni-HHTP (M=Co2+, Mn2+, Cu2+, LDH=layered double hydroxide) are successfully synthesised by doping metals into Ni-HHTP and Ni(OH)2, respectively. As a result, NiCu-LDH@Ni-HHTP showed the best excellent glucose detection sensitivity.

Immobilizing Bimetallic RuCo Nanoalloys on Few-Layered MXene as a Robust Bifunctional Electrocatalyst for Overall Water Splitting.

Doping Co atoms into Ru lattices can tune the electronic structure of active sites, and the conductive MXene can adjust the electrical conductivity of catalysts, which are both favorable for improving the electrocatalytic activity of the catalyst for water splitting. Here, ruthenium-cobalt bimetallic nanoalloys coupled with exfoliated Ti3 C2 Tx MXene (RuCo-Ti3 C2 Tx ) have been constructed by ice-templated and thermal activation. Due to the strong interaction between the RuCo nanoalloys and conductive MXene, RuCo-Ti3 C2 Tx not only exhibits an excellent hydrogen evolution reaction (HER) performance with a low overpotential and Tafel slope (60 mV, 34.8 mV dec-1 in 0.5 M H2 SO4 and 52 mV, 38.7 mV dec-1 in 1 M KOH), but also good oxygen evolution reaction (OER) performance in an alkaline electrolyte (266 mV, 111.1 mV dec-1 in 1 M KOH). The assembled RuCo-Ti3 C2 Tx ||RuCo-Ti3 C2 Tx electrolyzer requires a lower potential (1.56 V) than does the Pt/C||RuO2 electrolyzer at 10 mA cm-2 . A boosted catalytic HER activity from immobilizing the RuCo nanoalloys on MXene was unveiled by density functional theory calculations. This study provides a feasible and efficient strategy for developing MXene-based catalysts for overall water splitting.

Triple Effect of "Conductivity-Adsorption-Catalysis" Enables MXene@FeCoNiP to be Sulfur Hosts for Lithium-Sulfur Batteries.

The weak chemical immobilization ability and poor catalytic effect of MXene inhibit its application in lithium-sulfur (Li-S) batteries. Herein, a novel MXene@FeCoNiP composite is rationally developed and utilized as a sulfur host for Li-S batteries. In this well-designed MXene-based nanostructure, the introduction of FeCoNiP in the interlayer of MXene nanosheets can not only effectively inhibit the restacking of MXene nanosheets but also act as an accelerator for the adsorption and catalysis of polysulfides to restrain the shuttling effect and facilitate the transformation of polysulfides. The existence of two-dimensional MXene nanosheets provides more active sites and improves the conductivity, which is beneficial for accelerating the reaction kinetics. Thus, the as-prepared MXene@FeCoNiP composites achieve an outstanding performance for Li-S batteries. This work provides an opportunity to construct an ideal sulfur host with the triple effect of "conductivity-adsorption-catalysis".

Hf-Doped CoP Hollow Nanocubes as High-Performance Electrocatalyst for Oxygen Evolution Reaction.

Designing and synthesizing hollow frame structures with unique three-dimensional open structures in electrocatalysis remain a challenge. Etching is an effective method to synthesize metal-organic frameworks (MOFs) with a hollow structure and rich function. Herein, we report the design and synthesis of Hf-doped CoP hollow nanocubes by selective etching and ion exchange. Different from the traditional etching method, we used acid xylenol orange solution to etch typically the (211) crystal face of ZIF-67, obtaining the unique bell-like structure, named XO-ZIF-67. Subsequently, Hf-doped CoP hollow nanocubes were formed by Hf4+ doping and simple phosphating treatment. Electrochemical tests showed that the overpotential of the obtained catalyst is only 291 mV at the current density of 10 mA cm-2 when applied in catalyzing the oxygen evolution reaction (OER). Furthermore, the catalyst shows excellent stability when running in 1 M KOH solution for 25 h.

Successful In Situ Growth of Conductive MOFs on 2D Cobalt-Based Compounds and Their Electrochemical Performance.

Conductive metal-organic frameworks (cMOFs), as a kind of porous material, are considered to be highly promising materials in the field of electrochemistry due to their excellent conductivity. However, due to the low specific capacitance of pure cMOFs, their application in supercapacitors is limited. By virtue of the high theoretical capacity and excellent chemical stability of Co-based compounds, in this work, cMOFs' M-HHTP (M = Ni, Co, NiCo, HHTP = 2,3,6,7,10,11-hexahydroxytriphenylene) are grown in situ on Co(OH)2, CoP, and Co3O4 nanosheets, resulting in a series of electroactive compounds as electrode materials used in supercapacitors. Among all of the compounds, Ni-HHTP@Co(OH)2 shows the most excellent energy storage performance and outstanding cyclic stability in the application of aqueous asymmetric supercapacitors.

The role of DRP1 mediated mitophagy in HT22 cells apoptosis induced by silica nanoparticles.

Silica nanoparticles (SiNPs) are widely used in the biomedical field and can enter the central nervous system through the blood-brain barrier, causing damage to hippocampal neurons. However, the specific mechanism remains unclear. In this experiment, HT22 cells were selected as the experimental model in vitro, and the survival rate of cells under the action of SiNPs was detected by MTT method, reactive oxygen species (ROS), lactate dehydrogenase (LDH), superoxide dismutase (SOD), catalase (CAT), glutathione peroxidase (GSH-Px) and adenosine triphosphate (ATP) were tested by the kit, the ultrastructure of the cells was observed by transmission electron microscope, membrane potential (MMP), calcium ion (Ca2+) and apoptosis rate were measured by flow cytometry, and the expressions of mitochondrial functional protein, mitochondrial dynein, mitochondrial autophagy protein as well as apoptosis related protein were detected by Western blot. The results showed that cell survival rate, SOD, CAT, GSH-Px, ATP and MMP gradually decreased with the increase of SiNPs concentration, while intracellular ROS, Ca2+, LDH and apoptosis rate increased with the increase of SiNPs concentration. In total cellular proteins,the expressions of mitochondrial functional proteins VDAC and UCP2 gradually increased, the expression of mitochondrial dynamic related protein DRP1 increased while the expressions of OPA1 and Mfn2 decreased. The expressions of mitophagy related proteins PINK1, Parkin and LC3Ⅱ/LC3Ⅰ increased and P62 gradually decreased, as well as the expressions of apoptosis related proteins Apaf-1, Cleaved-Caspase-3, Caspase-3, Caspase-9, Bax and Cyt-C. In mitochondrial proteins, the expressions of mitochondrial dynamic related proteins DRP1 and p-DRP1 were increased, while the expressions of OPA1 and Mfn2 were decreased. Expressions of mitochondrial autophagy associated proteins PINK1, Parkin, LC3II/LC3I increased, P62 decreased gradually, as well as the expressions of apoptosis related proteins Cleaved-Caspase-3, Caspase-3, and Caspase-9 increased, and Cyt-C expressions decreased. To further demonstrate the role of ROS and DRP1 in HT22 cell apoptosis induced by SiNPs, we selected the ROS inhibitor N-Acetylcysteine (NAC) and Dynamin-related protein 1 (DRP1) inhibitor Mdivi-1. The experimental results indicated that the above effects were remarkably improved after the use of inhibitors, further confirming that SiNPs induce the production of ROS in cells, activate DRP1, cause excessive mitochondrial division, induce mitophagy, destroy mitochondrial function and eventually lead to apoptosis.

Polysaccharide from Atractylodes macrocephala Koidz Binding with Zinc Oxide Nanoparticles as a Novel Mucosal Immune Adjuvant for H9N2 Inactivated Vaccine.

H9N2 avian influenza poses a significant public health risk, necessitating effective vaccines for mass immunization. Oral inactivated vaccines offer advantages like the ease of administration, but their efficacy often requires enhancement through mucosal adjuvants. In a previous study, we established a novel complex of polysaccharide from Atractylodes macrocephala Koidz binding with zinc oxide nanoparticles (AMP-ZnONPs) and preliminarily demonstrated its immune-enhancing function. This work aimed to evaluate the efficacy of AMP-ZnONPs as adjuvants in an oral H9N2-inactivated vaccine and the vaccine's impact on intestinal mucosal immunity. In this study, mice were orally vaccinated on days 0 and 14 after adapting to the environment. AMP-ZnONPs significantly improved HI titers, the levels of specific IgG, IgG1 and IgG2a in serum and sIgA in intestinal lavage fluid; increased the number of B-1 and B-2 cells and dendritic cell populations; and enhanced the mRNA expression of intestinal homing factors and immune-related cytokines. Interestingly, AMP-ZnONPs were more likely to affect B-1 cells than B-2 cells. AMP-ZnONPs showed mucosal immune enhancement that was comparable to positive control (cholera toxin, CT), but not to the side effect of weight loss caused by CT. Compared to the whole-inactivated H9N2 virus (WIV) group, the WIV + AMP-ZnONP and WIV + CT groups exhibited opposite shifts in gut microbial abundance. AMP-ZnONPs serve as an effective and safe mucosal adjuvant for oral WIV, improving cellular, humoral and mucosal immunity and microbiota in the gastrointestinal tract, avoiding the related undesired effects of CT.

MXene-mediated Interfacial Growth of 2D-2D Heterostructured Nanomaterials as Cathodes for Zn-based Aqueous Batteries.

In this study, we introduce a novel approach for synthesizing two-dimensional (2D) MXene heterostructures featuring a sandwiched and cross-linked network structure. This method addresses the common issue of activity degradation in 2D nanomaterials caused by inevitable aggregation. By utilizing the distinct surface characteristics of MXene, we successfully induced the growth of various 2D nanomaterials on MXene substrates. This strategy effectively mitigates self-stacking defects and augments the exposure of surface areas. In particular, the obtained 2D-2D MXene@NiCo-layered double hydroxide (MH-NiCo) heterostructures exhibit enhanced structural stability, improved chemical reversibility, and heightened charge transfer efficiency, outperforming pure NiCo LDH. The aqueous MH-Ni4Co1//Zn@carbon cloth (MH-Ni4Co1//Zn@CC) battery demonstrates exceptional performance with a remarkable specific capacity of 0.61 mAh cm-2, maintaining 96.6 % capacitance after 2300 cycles. Additionally, it achieves an energy density of 1.047 mWh cm-2 and a power density of 32.899 mW cm-2. This research not only paves the way for new design paradigms in energy-related nanomaterials but also offers invaluable insights for the application and optimization of 2D-2D heterostructures in advanced electrochemical devices.

Synergistic Effect of Oxygen Vacancy and High Porosity of Nano MIL-125(Ti) for Enhanced Photocatalytic Nitrogen Fixation.

This work reports that a low-temperature thermal calcination strategy was adopted to modulate the electronic structure and attain an abundance of surface-active sites while maintaining the crystal morphology. All the experiments demonstrate that the new photocatalyst nano MIL-125(Ti)-250 obtained by thermal calcination strategy has abundant Ti3+ induced by oxygen vacancies and high specific surface area. This facilitates the adsorption and activation of N2 molecules on the active sites in the photocatalytic nitrogen fixation. The photocatalytic NH3 yield over MIL-125(Ti)-250 is enhanced to 156.9 µmol g-1 h-1 , over twice higher than that of the parent MIL-125(Ti) (76.2 µmol g-1 h-1 ). Combined with density function theory (DFT), it shows that the N2 adsorption pattern on the active sites tends to be from "end-on" to "side-on" mode, which is thermodynamically favourable. Moreover, the electrochemical tests demonstrate that the high atomic ratio of Ti3+ /Ti4+ can enhance carrier separation, which also promotes the efficiency of photocatalytic N2 fixation. This work may offer new insights into the design of innovative photocatalysts for various chemical reduction reactions.

Ion Exchange-mediated 3D Cross-linked ZIF-L Superstructure for Flexible Electrochemical Energy Storage.

Metal-organic frameworks (MOFs) are considered as a promising candidate for advancing energy storage owing to their intrinsic multi-channel architecture, high theoretical capacity, and precise adjustability. However, the low conductivity and poor structural stability lead to unsatisfactory rate and cycling performance, greatly hindering their practical application. Herein, we propose a sea urchin-like Co-ZIF-L superstructure using molecular template to induce self-assembly followed by ion exchange method, which shows improved conductivity, successive channels, and high stability. The ion exchange can gradually etch the superstructure, leading to the reconstruction of Co-ZIF-L with three-dimensional (3D) cross-linked ultrathin porous nanosheets. Moreover, the precise control of Co to Ni ratios can construct effective micro-electric field and synergistically enhance the rapid transfer of electrons and electrolyte ions, improving the conductivity and stability of CoNi-ZIF-L. The Co6.53Ni-ZIF-L electrode exhibits a high specific capacity (602 F g-1 at 1 A g-1) and long cycling stability (95.3% retention after 4,000 cycles at 5 A g-1). The Co6.53Ni-ZIF-L//AC asymmetric flexible supercapacitor employing gel electrolyte also exhibits excellent cycling stability (93.3% retention after 4000 cycles at 5 A g-1). This discovery provides valuable insights for electrode material selection and energy storage efficiency improvement.

Fe, N-Inducing Interfacial Electron Redistribution in NiCo Spinel on Biomass-Derived Carbon for Bi-functional Oxygen Conversion.

Herein, an interfacial electron redistribution is proposed to boost the activity of carbon-supported spinel NiCo2O4 catalyst toward oxygen conversion via Fe, N-doping strategy. Fe-doping into octahedron induces a redistribution of electrons between Co and Ni atoms on NiCo1.8Fe0.2O4@N-carbon. The increased electron density of Co promotes the coordination of water to Co sites and further dissociation. The generation of proton from water improves the overall activity for the oxygen reduction reaction (ORR). The increased electron density of Ni facilitates the generation of oxygen vacancies. The Ni-VO-Fe structure accelerates the deprotonation of *OOH to improve the activity toward oxygen evolution reaction (OER). N-doping modulates the electron density of carbon to form active sites for the adsorption and protonation of oxygen species. Fir wood-derived carbon endows catalyst with an integral structure to enable outstanding electrocatalytic performance. The NiCo1.8Fe0.2O4@N-carbon express high half-wave potential up to 0.86 V in ORR and low overpotential of 270 mV at 10 mA cm-2 in OER. The zinc-air batteries (ZABs) assembled with the as-prepared catalyst achieve long-term cycle stability (over 2000 cycles) with peak power density (180 mWcm-2). Fe, N-doping strategy drives the catalysis of biomass-derived carbon-based catalysts to the highest level for the oxygen conversion in ZABs.

The effective separation of photogenerated carriers in MIL101 nanocomposites promoting the efficient photocatalytic desulfurization in air.

The extensive industrial applications of fuel oil, a critical strategic resource, are accompanied by significant environmental and health concerns due to the presence of sulfur-containing compounds in its composition, which result in hazardous combustion waste. Extensive research has been conducted to develop technologies for low-vulcanization fuel production to address this issue. Consequently, the investigation of catalysts for environmentally friendly and safe photocatalytic desulfurization becomes imperative. To that end, we have designed efficient MIL-101(Fe)/CQDs@g-C3N4 (MIL101/CDs-C3N4) Z-scheme heterojunction photocatalysts with high carrier separation and mobility through a thermal polymerization-hydrothermal strategy. The high concentration of photogenerated carriers facilitates the activation of oxygen and H2O2, leading to increased production of ROS (·O2-, ·OH, h+), thereby enhancing the photocatalytic desulfurization (PODS). Additionally, DFT calculations were utilized to determine the electron migration pathways of the catalysts and adsorption energies of DBT (dibenzothiophene). Moreover, Gibbs free energy calculations indicated that MIL101/CDs-C3N4 exhibited the lowest activation energy for oxygen and H2O2. The mechanism of photocatalytic desulfurization was proposed through a combination of theoretical calculations and experimental studies. This study provides guidance for the development of MOF-based Z-scheme systems and their practical application in desulfurization processes.

Synthesis of Conductive MOFs and Their Electrochemical Application.

Conductive metal-organic frameworks (MOFs) are a type of porous material. It consists of metal ions coordinated with highly conjugated organic ligands. The high density of carriers and orbital overlap contribute to the amazing conductivity. Additionally, conductive MOFs inherit the advantages of large specific surface area, structural diversity, and adjustable pore size from MOFs. These excellent properties have attracted many researchers to explore controllable synthesis and electrochemical applications over the past decade. This work provides an overview of the recent advances in the synthesis strategies of conductive MOFs and highlights their applications in electrocatalysis, supercapacitors, sensors, and batteries. Finally, the challenges faced by the synthesis and application of conductive MOFs are discussed, as well as the views on promising solutions for them are presented.

Manipulating the Rectifying Contact between Ultrafine Ru Nanoclusters and N-Doped Carbon Nanofibers for High-Efficiency pH-Universal Electrocatalytic Hydrogen Evolution.

The rational design of ingenious strategies to boost the intrinsic activity and stability of ruthenium (Ru) is of great importance for the substantial progression of water electrolysis technology. Based on Mott-Schottky effect, electronic regulation within a metal/semiconductor hybrid electrocatalyst represents a versatile strategy to boost the electrochemical performance. Herein, a typical Mott-Schottky hydrogen evolution reaction (HER) electrocatalyst composed of uniform ultrafine Ru nanoclusters in situ anchored on N-doped carbon nanofibers (abbreviated as Ru@N-CNFs hereafter) through a feasible and scalable "phenolic resin-bridged" strategy is reported. Both spectroscopy analyses and density functional theory calculations manifest that such rectifying contact can induce the spontaneous electron transfer from Ru to N-doped carbon nanofibers to generate a built-in electric field, thus enormously promoting the charge transfer efficiency and HER intrinsic activity. Moreover, the seamless immobilization of Ru nanoclusters on the substrate can prevent the active sites from unfavorable migration, coarsening, and detachment, rendering the excellent structural stability. Consequently, the well-designed Ru@N-CNFs afford prominent pH-universal HER performances with small overpotentials of 16 and 17 mV at 10 mA cm-2 and low Tafel slopes of 31.8 and 28.5 mV dec-1 in acidic and alkaline electrolytes, respectively, which are superior to the state-of-the-art commercial Pt/C and Ru/C benchmarks.