Biogenic Palladium Improved Perchlorate Reduction during Nitrate Co-Reduction by Diverting Electron Flow in a Hydrogenotrophic Biofilm.

Microbial reduction of perchlorate (ClO4-) is emerging as a cost-effective strategy for groundwater remediation. However, the effectiveness of perchlorate reduction can be suppressed by the common co-contamination of nitrate (NO3-). We propose a means to overcome the limitation of ClO4- reduction: depositing palladium nanoparticles (Pd0NPs) within the matrix of a hydrogenotrophic biofilm. Two H2-based membrane biofilm reactors (MBfRs) were operated in parallel in long-term continuous and batch modes: one system had only a biofilm (bio-MBfR), while the other incorporated biogenic Pd0NPs in the biofilm matrix (bioPd-MBfR). For long-term co-reduction, bioPd-MBfR had a distinct advantage of oxyanion reduction fluxes, and it particularly alleviated the competitive advantage of NO3- reduction over ClO4- reduction. Batch tests also demonstrated that bioPd-MBfR gave more rapid reduction rates for ClO4- and ClO3- compared to those of bio-MBfR. Both biofilm communities were dominated by bacteria known to be perchlorate and nitrate reducers. Functional-gene abundances reflecting the intracellular electron flow from H2 to NADH to the reductases were supplanted by extracellular electron flow with the addition of Pd0NPs.

Factors affecting periodontal healing of the adjacent second molar after lower third molar surgery: a systematic review and meta-analysis.

OBJECTIVES: This systematic review and meta-analysis aim to evaluate the effect modifiers which may influence the periodontal healing of the adjacent second molar after lower third molar surgery. MATERIALS AND METHODS: Prospective studies including patients with third molars requiring removal, with at least 6 months follow-up were considered. Outcomes were periodontal probing depth (PPD) reduction, final PPD, clinical attachment level (CAL) change, final CAL, alveolar bone defect (ABD) reduction, and final ABD depth. Meta-regression was performed to identify factors. RESULTS: Fourteen studies were included in the quantitative synthesis. At 6 months, the PPD reduction was 1.06 mm (95% CI, 0.72 to 1.39 mm) and the remaining PPD was 3.81 mm (95% CI, 3.00 to 4.62 mm). Baseline PPD was strongly correlated with the remaining PPD at 6 months (p < 0.001, adjusted R2 = 70.05%). CONCLUSIONS: Lower third molar surgery results in a modest reduction in PPD, CAL, and ABD; however, periodontal defects still remain at 6 months and beyond. Baseline PPD is strongly correlated with final PPD. While age is not shown to have effect on most of the periodontal parameters, a larger baseline PPD is more likely to manifest with increasing age and third molar surgery should be done before severe periodontitis occurs to avoid persistent periodontal defects. CLINICAL RELEVANCE: This study shows that lower third molar surgery results in modest improvement in periodontal parameters on adjacent second molars and identified factors such as baseline PPD which may affect the healing, which may guide the pre-, peri-, and post-operative management of lower third molar surgery.

Pre-Epiglottic Baton Plate in the Management of Upper Airway Obstruction in an Infant with Femoral Facial Syndrome: A Case Report.

Femoral facial syndrome (FFS) is a rare condition which may present with hypoplasia or aplasia of the femora and unusual facies characterized by long philtrum, thin upper lip and micrognathia. We present the case of a ten-month old infant with FFS who had retroglossal obstruction and who was treated with a pre-epiglottic baton plate. The pre-epiglottic baton plate can be a simple, non-invasive and effective tool for the clinical management of syndromic patients with mild-to-moderate upper airway obstruction due to micrognathia.

Dissimilatory and Cytoplasmic Antimonate Reductions in a Hydrogen-Based Membrane Biofilm Reactor.

A hydrogen-based membrane biofilm reactor (H2-MBfR) was operated to investigate the bioreduction of antimonate [Sb(V)] in terms of Sb(V) removal, the fate of Sb, and the pathways of reduction metabolism. The MBfR achieved up to 80% Sb(V) removal and an Sb(V) removal flux of 0.55 g/m2·day. Sb(V) was reduced to Sb(III), which mainly formed Sb2O3 precipitates in the biofilm matrix, although some Sb(III) was retained intracellularly. High Sb(V) loading caused stress that deteriorated performance that was not recovered when the high Sb(V) loading was removed. The biofilm community consisted of DSbRB (dissimilatory Sb-reduction bacteria), SbRB (Sb-resistant bacteria), and DIRB (dissimilatory iron-reducing bacteria). Dissimilatory antimonate reduction, mediated by the respiratory arsenate reductase ArrAB, was the main reduction route, but respiratory reduction coexisted with cytoplasmic Sb(V)-reduction mediated by arsenate reductase ArsC. Increasing Sb(V) loading caused stress that led to increases in the expression of arsC gene and intracellular accumulation of Sb(III). By illuminating the roles of the dissimilatory and cytoplasmic Sb(V) reduction mechanism in the biofilms of the H2-MBfR, this study reveals that the Sb(V) loading should be controlled to avoid stress that deteriorates Sb(V) reduction.

Nitrate application decreased microbial biodiversity but stimulated denitrifiers in epiphytic biofilms on Ceratophyllum demersum.

Among nitrogen species, nitrate is more stable than ammonium and nitrite, and it is an important nitrogenous pollutant in surface water. However, little is known about the characterization of epiphytic microbial communities on submersed macrophytes under nitrate loading. In this study, we investigated the co-occurring pattern and response of bacteria and microeukaryotes in epiphytic biofilms under nitrate loading. Nitrate loading significantly affected bacterial and eukaryotic communities, and turnover played greater contribution to the total dissimilarity than nestedness by partitioning beta-diversity analysis. Cyanobacteria, α-proteobacteria, ß-proteobacteria, Actinobacteria, Planctomycetes, Bacteroidetes, and γ-proteobacteria were dominant bacterial phyla/classes. Metazoan (phylum Arthropoda, Rotifera, Gastrotricha, Annelida, and Nematoda) and algae (phylum Bacillariophyta, Chlorophyta, and Streptophyta) were dominated in eukaryotic communities. The abundances of denitrifying bacteria (Rhodobacter, Acinetobacter, Bacillus, Flavobacterium, and Pseudomonas) and genes (nirS, cnorB, and nosZ) increased with nitrate loading. The network analysis showed there were complex interactions among photosynthetic microbes, metazoan, and bacteria (including denitrifiers) that they were potentially interrelated via photosynthesis, predation or feeding. This study provides new perspectives into understanding the factors affecting nitrate removal mechanisms in wetlands with submersed macrophytes.

Mechanical responses of the mechanosensitive unstructured domains in cardiac titin.

BACKGROUND INFORMATION: Titin is one of the three main filaments in cardiac sarcomere. Besides a chain of Ig domains, cardiac titin also contains a proline (P), glutamate (E), valine (V), lysine (K) (PEVK) domain and a cardiac-specific N2B domain, both are largely unstructured. While they are believed to be involved in the elastic (PEVK and N2B) and the trophic (N2B) functions of the heart, their mechanical responses in physiological level of forces remains poorly understood. RESULTS: In order to gain understanding on their mechanical responses, we used magnetic tweezers to investigate their force responses from 1 to 30 pN. We confirmed that in vitro the PEVK domain is intrinsically disordered within the force range. Surprisingly, we discovered a mechanosensitive folded element in the disordered region of N2B, ∼84 amino acids in length, which has a large folding energy of approximately -10 kB T. Based on the force responses of PEVK and N2B domains, as well as an approximated force-dependent unfolding and refolding rates of titin Ig domains, we show that the tension in cardiac titin fluctuates within 5 pN during cardiac contraction and extension cycle using Gillespie simulation algorithm. Exceptionally, the simulation shows that deletion of N2B domain results in 10-fold increase in peak force. CONCLUSION: Our results highlight a critical role that N2B may potentially play in regulating tension on cardiac titin. SIGNIFICANCE: The study provides new insights into the tension regulatory role of unstructured domains in the elastic function of the heart, which has broad implication in diastolic dysfunction and cardiac trophic mechanisms. In addition, the method can be applied to probing other unstructured mechanosensitive proteins/domains.

Comparative analysis of right heart chamber remodeling after surgical and device secundum atrial septal defect closure in adults.

BACKGROUND: To determine differences in right heart remodeling for patients with ASD who underwent surgical compared to device closure. METHODS: Retrospective analysis of echo data of 121 adult patients with ASD from 2005 to 2015 performed prior to closure and within 6-8 weeks, 6 months, and 1 year post closure. RESULTS: 121 patients with median age of 39 were studied. Patients who underwent device closure were older (46 vs 37 years, P < 0.05) with smaller mean ASD size (1.9 cm vs 2.3 cm, P < 0.05). We observed a similar and significant reduction in right heart parameters and PASP for both surgical and device closure groups on serial echos up to 1 year. Device closure was associated with preservation of TAPSE compared to surgical closure (reduction of 0.2 cm vs 0.6 cm, P < 0.001). Younger adults with ASD intervention (<40 years) had lower baseline PASP (33 mmHg vs 40 mmHg, P < 0.05) compared to older adults (>40 years). This difference persisted up to 1 year with no difference in rate of right heart remodeling. The effects of device closure with better preservation of TAPSE and S' compared to surgery were consistent within both groups of younger and older adults. CONCLUSION: Device and surgical closure of ASD both result in similar improvements in right heart parameters. However, device closure is associated with better preservation of TAPSE at 1 year post intervention. Intervention for older adults with ASD, when compared to younger ones, did not result in a difference in rate of right heart remodeling.

Joint experimental and theoretical studies of the surprising stability of the aryl pentazole upon noncovalent binding to ß-cyclodextrin.

Herein, binding of the ß-cyclodextrin (ß-CD) host to the unstable aryl pentazole guest has been confirmed experimentally and theoretically. After the confinement of aryl pentazole, electron density reorganization was studied by M06-2X dispersion-corrected DFT and further reflected in the characteristic shift in the NMR spectra. Among the host-guest complexes, the inclusion complex is favored with the phenyl ring expectedly encapsulated within the cavity through noncovalent interactions such as hydrogen bonding, C-Hπ, and the special Csp2-HH-Csp3 bonding discovered by the NBO, QTAIM, and NCI-RDG theories. The host-guest binding renders the enhancement of the nitrogen-ring aromatic character; this has been analyzed by employing nucleus-independent chemical shift (NICS)-based profiles. The non-covalent interaction largely enhances the thermal stability of the guest through a change of the decomposition reaction path whether the guest is encapsulated or not by the host. By comparison of the structures of B1-B4, the enhancement could be assigned to the ion-type transition structure stabilized by the C-H bonds of the host.

Comparison of intravascular ultrasound guided versus angiography guided drug eluting stent implantation: a systematic review and meta-analysis.

BACKGROUND: Intravascular ultrasound (IVUS) can be a useful tool during drug-eluting stents (DES) implantation as it allows accurate assessment of lesion severity and optimal treatment planning. However, numerous reports have shown that IVUS guided percutaneous coronary intervention is not associated with improved clinical outcomes, especially in non-complex patients and lesions. METHODS: We searched the literature in Medline, the Cochrane Library, and other internet sources to identify studies that compare clinical outcomes between IVUS-guided and angiography-guided DES implantation. Random-effects model was used to assess treatment effect. RESULTS: Twenty eligible studies with a total of 29,068 patients were included in this meta-analysis. The use of IVUS was associated with significant reductions in major adverse cardiovascular events (MACE, odds ratios [OR] 0.77, 95 % confidence intervals [CI] 0.71-0.83, P < 0.001), death (OR 0.62, 95 % CI 0.54-0.71, p < 0.001), and stent thrombosis (OR 0.59, 95 % CI: 0.47-0.73, P < 0.001). The benefit was also seen in the repeated analysis of matched and randomized studies. In stratified analysis, IVUS guidance appeared to be beneficial not only in patients with complex lesions or acute coronary syndromes (ACS) but also patients with mixed lesions or presentations (MACE: OR 0.69, 95 % CI: 0.60-0.79, p < 0.001, OR 0.81, 95 % CI 0.74-0.90, p < 0.001, respectively). By employing meta-regression analysis, the benefit of IVUS is significantly pronounced in patients with complex lesions or ACS with respect to death (p = 0.048). CONCLUSIONS: IVUS guidance was associated with improved clinical outcomes, especially in patients with complex lesions admitted with ACS. Large, randomized clinical trials are warranted to identify populations and lesion characteristics where IVUS guidance would be associated with better outcomes.

TAP1 I333V gene polymorphism and type 1 diabetes mellitus: a meta-analysis of 2248 cases.

Transporter associated with antigen processing 1 (TAP1) I333V gene polymorphism has been suggested to be associated with type 1 diabetes mellitus (T1DM) susceptibility. However, the results from individual studies are inconsistent. To explore the association of TAP1 I333V gene polymorphisms with T1DM, a meta-analysis involving 2246 cases from 13 individual studies was conducted. The pooled odd ratios (ORs) and their corresponding 95% confidence intervals (95% CIs) were evaluated by a fixed-effect model. A significant relationship was observed between TAP1 I333V gene polymorphism and T1DM in allelic (OR: 1.35, 95% CI: 1.08-1.68, P = 0.007), dominant (OR: 1.462, 95% CI: 1.094-1.955, P = 0.010), homozygous (OR: 1.725, 95% CI: 1.082-2.752, P = 0.022), heterozygous (OR: 1.430, 95% CI: 1.048-1.951, P = 0.024) and additive (OR: 1.348, 95% CI: 1.084-1.676, P = 0.007) genetic models. No significant association between TAP1 I333V gene polymorphism and T1DM was detected in a recessive genetic model (OR: 1.384, 95% CI: 0.743-2.579, P = 0.306) in the entire population, especially among Caucasians. No significant association between them was found in an Asian or African population. TAP1 I333V gene polymorphism was significantly associated with increased T1DM risk. V allele carriers might be predisposed to T1DM susceptibility.

Predicting thermodynamic adhesion energies of membrane fouling in planktonic anammox MBR via backpropagation neural network model.

Predicting thermodynamic adhesion energies was a critical strategy for mitigating membrane fouling. This study utilized a backpropagation (BP) neural network model to predict the thermodynamic adhesion energies associated with membrane fouling in a planktonic anammox MBR. Acid-base (ΔGAB), electrostatic double layer (ΔGEL), and Lifshitz-van der Waals (ΔGLW) energies were selected as output variables, the training dataset was collected by the advanced Derjaguin-Landau-Verwey-Overbeek (XDLVO) method. Optimization results identified "7-10-3″ as the optimal network structure for the BP model. The prediction results demonstrated a high degree of fit between the predicted and experimental values of thermodynamic adhesion energy (R2 ≥ 0.9278), indicating a robust predictive capability of the model in this study. Overall, the study presented a practical BP neural network model for predicting thermodynamic adhesion energies, significantly enhancing the prediction tool for adhesive fouling behavior in anammox MBRs.

Reduction and precipitation of chromium(VI) using a palladized membrane biofilm reactor.

H2-driven reduction of hexavalent chromium (Cr(VI)) using precious-metal catalysts is promising, but its implementation in water treatment has been restricted by poor H2-transfer efficiency and high catalyst loss. We investigated the reduction of Cr(VI) through hydrogenation catalyzed by elemental-palladium nanoparticles (PdNPs) generated in-situ within biofilm of a membrane biofilm reactor (MBfR), creating a Pd-MBfR. Experiments were conducted using a Pd-MBfR and a non-Pd MBfR. The Pd-MBfR achieved Cr(VI) (1000 µg L-1) reduction of >99 % and reduced the concentration of total Cr to below 50 µg L-1, much lower than the total Cr concentration in the non-Pd MBfR effluent (290 µg L-1). The Pd-MBfR also had a lower concentration of dissolved organic compounds compared to the non-Pd MBfR, which minimized the formation of soluble organo-Cr(III) complexes and promoted precipitation of Cr(OH)3. Solid-state characterizations documented deposition of Cr(OH)3 as the product of Cr(VI) reduction in the Pd-MBfR. Metagenomic analyses revealed that the addition and reduction of Cr(VI) had minimal impact on the microbial community (dominated by Dechloromonas) and functional genes in the biofilm of the Pd-MBfR, since the PdNP-catalyzed reduction process was rapid. This study documented efficient Cr(VI) reduction and precipitation of Cr(OH)3 by the Pd-MBfR technology.

NQO1 Mediates Lenvatinib Resistance by Regulating ROS-induced Apoptosis in Hepatocellular Carcinoma.

OBJECTIVE: Hepatocellular carcinoma (HCC) is the third leading cause of cancer-associated death worldwide. As a first-line drug for advanced HCC treatment, lenvatinib faces a significant hurdle due to the development of both intrinsic and acquired resistance among patients, and the underlying mechanism remains largely unknown. The present study aims to identify the pivotal gene responsible for lenvatinib resistance in HCC, explore the potential molecular mechanism, and propose combinatorial therapeutic targets for HCC management. METHODS: Cell viability and colony formation assays were conducted to evaluate the sensitivity of cells to lenvatinib and dicoumarol. RNA-Seq was used to determine the differences in transcriptome between parental cells and lenvatinib-resistant (LR) cells. The upregulated genes were analyzed by GO and KEGG analyses. Then, qPCR and Western blotting were employed to determine the relative gene expression levels. Afterwards, the intracellular reactive oxygen species (ROS) and apoptosis were detected by flow cytometry. RESULTS: PLC-LR and Hep3B-LR were established. There was a total of 116 significantly upregulated genes common to both LR cell lines. The GO and KEGG analyses indicated that these genes were involved in oxidoreductase and dehydrogenase activities, and reactive oxygen species pathways. Notably, NAD(P)H:quinone oxidoreductase 1 (NQO1) was highly expressed in LR cells, and was involved in the lenvatinib resistance. The high expression of NQO1 decreased the production of ROS induced by lenvatinib, and subsequently suppressed the apoptosis. The combination of lenvatinib and NQO1 inhibitor, dicoumarol, reversed the resistance of LR cells. CONCLUSION: The high NQO1 expression in HCC cells impedes the lenvatinib-induced apoptosis by regulating the ROS levels, thereby promoting lenvatinib resistance in HCC cells.

Third Molar Coronectomy vs Total Removal in Second Molar Periodontal Healing.

OBJECTIVES: The objective of this randomised controlled trial was to compare the periodontal healing at the distal of the adjacent second molar after coronectomy or surgical removal and the surgical morbidities of the 2 techniques. METHODS: This is a pilot study of a split-mouth randomised clinical trial comparing the periodontal healing of the adjacent second molar after coronectomy or total removal of lower third molars, which was registered with the University of Hong Kong Clinical Trial Centre as HKUCTR-2948 on 21 February 2020. Cone beam computed tomography (CBCT) scans were taken preoperatively and at 6 months postoperatively. Changes in the bone level from the cemento-enamel junction, periodontal probing depth (PPD), and clinical attachment level (CAL) at the distal of the adjacent second molar were compared. Surgical morbidities in terms of pain, infection, neurologic deficit, root exposure, and need for second surgery for removal were assessed. RESULTS: Forty patients (22 male, 18 female) with mean age of 26.7 years were evaluated at 6 months postoperatively. Both coronectomy and total removal groups demonstrated statistically significant reduction in PPD and CAL. There was an alveolar bone gain of 1.28 ± 0.88 mm in the coronectomy group and 1.13 ± 0.73mm in the control group, which was statistically significant (P < .001 for both groups). CONCLUSIONS: Early findings show the periodontal healing at the adjacent second molar of coronectomy was as good as that of total removal of lower third molar. There were no differences in terms of surgical morbidities between both groups.

Self-designed three-dimensional printed skeletal anchorage titanium device for orthopaedic traction in a growing Class III patient.

Maxillary retrusion in a growing skeletal class III patient can be treated with growth modification by facemask therapy with skeletal anchorage. A 12-year-old boy presented with Skeletal Class III relationship, retrognathic maxilla and paranasal deficiency. Cone beam computer tomography (CBCT) was taken for the design of the customized skeletal anchorage device with a 3D planning computer software. Two pairs of skeletal anchorage surgical guides and plates were designed with the correct vector and location, and to avoid tooth roots in the fixation. The plates were printed with titanium and fixed onto the patient for the facemask therapy. CAD-CAM technology allows customization and precise execution of the skeletal anchorage for the facemask therapy. Self-designed 3D printed skeletal anchorage device, with the advantages of increased rigidity, ease of placement and accuracy of force application, can be a valid alternative to stock titanium plates.

Simultaneous removal of nitrate and ammonium by hydrogen-based partial denitrification coupled with anammox in a membrane biofilm reactor.

Hydrogen-based membrane biofilm reactors (MBfRs) are effective for nitrogen removal. However, the safety of hydrogen limited the application of MBfR. Here, a hydrogen-based partial denitrification system coupled with anammox (H2-PDA) was constructed in an MBfR for reducing hydrogen demand significantly. The metabolomics and structures of microbial communities were analyzed to determine the phenotypic differences and drivers underlying denitrification, anammox, and H2-PDA. These findings indicated that total nitrogen (TN) removal increased from 57.1% in S1 to 93.7% in S2. During the H2-PDA process, partial denitrification and anammox contributed to TN removal by 93.7% and 6.3%, respectively. Community analysis indicated that the H2-PDA system was dominated by the genus Meiothermus, which is involved in partial denitrification. Collectively, these findings confirmed the feasibility of incorporating the H2-PDA process in a MBfR and form a foundation for the establishment of novel and practical methods for efficient nitrogen removal.

Biological reduction and hydrodechlorination of chlorinated nitroaromatic antibiotic chloramphenicol under H2-transfer membrane biofilm reactor.

Chlorinated nitroaromatic antibiotic chloramphenicol (CAP) is a persistent pollutant that is widely present in environments. A H2 transfer membrane biofilm reactor (H2-MBfR) and short-term batch tests were setup to investigate the co-removal of CAP and NO3-. Results showed that the presence of CAP (<10 mg L-1) has no effect on the denitrification process while 100% removal efficiency of CAP can be obtained when nitrate was absent. Nitroaromatic reduction and completely dechlorination were successfully realized when CAP was removed. The CAP transformation product p-aminobenzoic acid (PABA) was detected and batch tests revealed that the hydroxy carboxylation was far faster than nitroaromatic reduction when p-nitrobenzyl alcohol (PNBOH) was conversed to p-aminobenzoic acid (PABA). The path way of CAP degradation was proposed based on the intermediate's analysis. Microbial community analysis indicated that Pleomorphomonadaceae accounts for the dechlorination of CAP.

Synthesis and characterization of potential polycyclic energetic materials using bicyclic triazole and azetidine structures as building blocks.

Exploring the design strategy of new energetic materials is crucial to promote the development of energetic materials. In this study, a method for designing polycyclic energetic materials is proposed by combining the azetidine structure with azobis-1,2,4-triazole or bi-1,2,4-triazole. A series of typical triazolyl polycyclic compounds were designed and synthesized by simple nucleophilic reaction, which included 5,5'-dichloro-3,3'-bis(3,3'-difluoroazetidine)-4,4'-azobis-1,2,4-triazole (1), 5,5'-dichloro-3,3'-bis(3,3'-difluoroazetidine)-4,4'-bi-1,2,4-triazole (2), 5,5'-dichloro-3-(N,N-dimethyl)-3'-(3,3'-difluoroazetidine)-4,4'-bi-1,2,4-triazole (3) 5,5'-dichloro-3,3'-bis(3,3'-dinitroazetidine)-4,4'-bi-1,2,4-triazole (4), 5,5'-dichloro-3-(N,N-dimethyl)-3'-(3,3'-dinitroazetidine)-4,4'-bi-1,2,4-triazole (5), and 5,5'-diazido-3,3'-bis(3,3'-difluoroazetidine)-4,4'-azo-1,2,4-triazole (6). These designed and synthesized polycyclic compounds (1, 2, 3) have high decomposition temperatures (>200 °C). The molecular van der Waals surface electrostatic potentials suggested the reactivity of compounds 1, 2, and 3 when attacked by nucleophiles. The natural bond orbital and Hirshfeld surface analysis proved the essential reason for the stability of these compounds in theory. The formula design example suggests that some triazolyl polycyclic compounds (4, 5, and 6) are potentially explosives, suggesting that this strategy is feasible for constructing the triazolyl polycyclic energetic compounds.

New technology for preparing energetic materials by nanofiltration membrane (NF): rapid and efficient preparation of high-purity ammonium dinitramide (ADN).

The development of environment-friendly and non-toxic green energetic materials and their safe, environmentally friendly, and economical production is very important to the national economy and national security. As an innovative, efficient, and environmentally friendly energetic material, the preferred preparation method of ammonium dinitramide (ADN) is the nitro-sulfur mixed acid method, which has the advantages of high yield, simple method, and easy access to raw materials. However, the large number of inorganic salt ions introduced by this method limits the large-scale production of ADN. Nanofiltration (NF) has been widely used in various industrial processes as a separation method with high separation efficiency and simple operation. In this study, NF was used for the desalination and purification of ADN synthesized by the mixed acid method. The effects of NF types, operation process (pressure, temperature, and feed solution concentration) on desalination efficiency, and membrane flux during purification were examined. The results showed that 600D NF could achieve the efficient desalination and purification of ADN. It was verified that the highest desalination and purification efficiency was achieved at 2 MPa pressure, 25 °C, and 1 time dilution of the feed solution, and the membrane flux of the desalination and purification process was stable. Under the optimized process conditions, the removal rate of inorganic salts and other impurities reached 99% (which can be recycled), the purity of ADN reached 99.8%, and the recovery rate reached 99%. This process has the potential for the large-scale production of ADN and provides a new process for the safe, efficient, and cheap preparation of energetic materials.

Synthesis and promising properties of a new family of high-nitrogen compounds: polyazido- and polyamino-substituted N,N'-azo-1,2,4-triazoles.

A new family of high-nitrogen compounds, that is, polyazido- and polyamino-substituted N,N'-azo-1,2,4-triazoles, were synthesized in a safe and convenient manner and fully characterized. The structures of 3,3',5,5'-tetra(azido)-4,4'-azo-1,2,4-triazole (15) and 3,3',5,5'-tetra(amino)-4,4'-azo-1,2,4-triazole (23) were also confirmed by X-ray diffraction. Differential scanning calorimetry (DSC) was performed to determine their thermal stability. Their heats of formation and density, which were calculated by using Gaussian 03, were used to determine the detonation performances of the related compounds (EXPLO 5.05). The heats of formation of the polyazido compounds were also derived by using an additive method. Compound 15 has the highest heat of formation (6933 kJ kg(-1)) reported so far for energetic compounds and a detonation performance that is comparable to that of octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX), while compound 23 has a decomposition temperature of up to 290 °C.