RESUMO
The high-entropy silicon anodes are attractive for enhancing electronic and Li-ionic conductivity while mitigating volume effects for advanced Li-ion batteries (LIBs), but are plagued by the complicated elements screening process. Inspired by the resemblances in the structure between sphalerite and diamond, we have selected sphalerite-structured SiP with metallic conductivity as the parent phase for exploring the element screening of high-entropy silicon-based anodes. The inclusion of the Zn in the sphalerite structure is crucial for improving the structural stability and Li-storage capacity. Within the same group, Li-storage performance is significantly improved with increasing atomic number in the order of BZnSiP3 < AlZnSiP3 < GaZnSiP3 < InZnSiP3. Thus, InZnSiP3-based electrodes achieved a high capacity of 719 mA h g-1 even after 1,500 cycles at 2,000 mA g-1, and a high-rate capacity of 725 mA h g-1 at 10,000 mA g-1, owing to its superior lithium-ion affinity, faster electronic conduction and lithium-ion diffusion, higher Li-storage capacity and reversibility, and mechanical integrity than others. Additionally, the incorporation of elements with larger atomic sizes leads to greater lattice distortion and more defects, further facilitating mass and charge transport. Following these screening rules, high-entropy disordered-cation silicon-based compounds such as GaCuSnInZnSiP6, GaCu(or Sn)InZnSiP5, and CuSnInZnSiP5, as well as high-entropy compounds with mixed-cation and -anion compositions, such as InZnSiPSeTe and InZnSiP2Se(or Te), are synthesized, demonstrating improved Li-storage performance with metallic conductivity. The phase formation mechanism of these compounds is attributed to the negative formation energies arising from elevated entropy.
RESUMO
Potassium- and sodium-ion batteries (PIBs and SIBs) have great potential as the next-generation energy application owing to the natural abundance of K and Na. Antimony (Sb) is a suitable alloying-type anode for PIBs and SIBs due to its high theoretical capacity and proper operation voltage; yet, the severe volume variation remains a challenge. Herein, a preparation of N-doped carbon-wrapped Sb nanoparticles (L-Sb/NC) using pulsed laser ablation and polydopamine coating techniques, is reported. As the anode for PIB and SIB, the L-Sb/NC delivers superior rate capabilities and excellent cycle stabilities (442.2 and 390.5 mA h g-1 after 250 cycles with the capacity decay of 0.037% and 0.038% per cycle) at the current densities of 0.5 and 1.0 A g-1 , respectively. Operando X-ray diffraction reveals the facilitated and stable potassiation and sodiation mechanisms of L-Sb/NC enabled by its optimal core-shell structure. Furthermore, the SIB full cell fabricated with L-Sb/NC and Na3 V2 (PO4 )2 F3 shows outstanding electrochemical performances, demonstrating its practical energy storage application.
RESUMO
Interface modulation of nickel phosphide (Ni2 P) to produce an optimal catalytic activation barrier has been considered a promising approach to enhance the hydrogen production activity via water splitting. Herein, heteronuclei-mediated in situ growth of hollow Ni2 P nanospheres on a surface defect-engineered titanium carbide (Ti3 C2 Tx ) MXene showing high electrochemical activity for the hydrogen evolution reaction (HER) is demonstrated. The heteronucleation drives intrinsic strain in hexagonal Ni2 P with an observable distortion at the Ni2 P@Ti3 C2 Tx MXene heterointerface, which leads to charge redistribution and improved charge transfer at the interface between the two components. The strain at the Ni2 P@Ti3 C2 Tx MXene heterointerface significantly boosts the electrochemical catalytic activities and stability toward HER in an acidic medium via a combination between experimental results and theoretical calculations. In a 0.5 m H2 SO4 electrolyte, the Ni2 P@Ti3 C2 Tx MXene hybrid shows excellent HER catalytic performance, requiring an overpotential of 123.6 mV to achieve 10 mA cm-2 with a Tafel slope of 39 mV dec-1 and impressive durability over 24 h operation. This approach presents a significant potential to rationally design advanced catalysts coupled with 2D materials and transition metal-based compounds for state-of-the-art high efficiency energy conversions.
RESUMO
Electrochemical capacitors charge and discharge more rapidly than batteries over longer cycles, but their practical applications remain limited due to their significantly lower energy densities. Pseudocapacitors and hybrid capacitors have been developed to extend Ragone plots to higher energy density values, but they are also limited by the insufficient breadth of options for electrode materials, which require materials that store alkali metal cations such as Li+ and Na+. Herein, we report a comprehensive and systematic review of emerging anion storage materials for performance- and functionality-oriented applications in electrochemical and battery-capacitor hybrid devices. The operating principles and types of dual-ion and whole-anion storage in electrochemical and hybrid capacitors are addressed along with the classification, thermodynamic and kinetic aspects, and associated interfaces of anion storage materials in various aqueous and non-aqueous electrolytes. The charge storage mechanism, structure-property correlation, and electrochemical features of anion storage materials are comprehensively discussed. The recent progress in emerging anion storage materials is also discussed, focusing on high-performance applications, such as dual-ion- and whole-anion-storing electrochemical capacitors in a symmetric or hybrid manner, and functional applications including micro- and flexible capacitors, desalination, and salinity cells. Finally, we present our perspective on the current impediments and future directions in this field.
RESUMO
Here, a thin and foldable porous reduced graphene oxide (rGO) fabricated by a solvent casting method (SC-rGO) is introduced. The SC-rGO is superior to aluminum as a positive triboelectric material in triboelectric nanogenerators (TENGs), significantly enhancing TENG output performance. The film shows extremely foldable features, where it could be folded by 1/16 size. The electrical properties and device performance of SC-rGO are optimized varying thicknesses from 5 to 30 µm. A 30 µm thick TENG with a non-annealed SC-rGO film (STENG) shows the highest output of about 255 µW cm-2 due to its high carrier concentration, low work function, and high surface area. After annealing, STENG performance is optimized with a 10 µm thick SC-rGO because their work functions decreases, while the corresponding carrier concentrations decrease according to the thickness of the SC-rGO films. The SC-rGO films are highly durable and stable, where their output and conductivity show negligible changes after 100 000 cycles of mechanical deformation. A large SC-rGO with a size of 13 × 3 cm2 is fabricated and is attached inside a person's arm to demonstrate the shape-adaptive characteristics. Consequently, 170 V is obtained and it turns on 19 green light emitting diodes by simply touching the STENG.
RESUMO
Highly active and durable electrocatalysts are essential for producing hydrogen fuel through the hydrogen evolution reaction (HER). Here, a uniform deposition of Ru nanoparticles strongly interacting with oxygen-rich carbon nanotube architectures (Ru-OCNT) through ozonation and hydrothermal approaches has been designed. The hierarchical structure of Ru-OCNT is made by self-assembly of oxygen functionalities of OCNT. Ru nanoparticles interact strongly with OCNT at the Ru/OCNT interface to give excellent catalytic activity and stability of the Ru-OCNT, as further confirmed by density functional theory. Owing to the hierarchical structure and adjusted surface chemistry, Ru-OCNT has an overpotential of 34â mV at 10â mA cm-2 with a Tafel slope of 27.8â mV dec-1 in 1â M KOH, and an overpotential of 55â mV with Tafel slope of 33â mV dec-1 in 0.5â M H2 SO4 . The smaller Tafel slope of Ru-OCNT than Ru-CNT and commercial Pt/C in both alkaline and acidic electrolytes indicates high catalytic activity and fast charge transfer kinetics. The as-proposed chemistry provides the rational design of hierarchically structured CNT/nanoparticle electrocatalysts for HER to produce hydrogen fuel.
RESUMO
Bulk and two-dimensional black phosphorus are considered to be promising battery materials due to their high theoretical capacities of 2,600 mAh g-1. However, their rate and cycling capabilities are limited by the intrinsic (de-)alloying mechanism. Here, we demonstrate a unique surface redox molecular-level mechanism of P sites on oxidized black phosphorus nanosheets that are strongly coupled with graphene via strong interlayer bonding. These redox-active sites of the oxidized black phosphorus are confined at the amorphorized heterointerface, revealing truly reversible pseudocapacitance (99% of total stored charge at 2,000 mV s-1). Moreover, oxidized black-phosphorus-based electrodes exhibit a capacitance of 478 F g-1 (four times greater than black phosphorus) with a rate capability of ~72% (compared to 21.2% for black phosphorus) and retention of ~91% over 50,000 cycles. In situ spectroelectrochemical and theoretical analyses reveal a reversible change in the surface electronic structure and chemical environment of the surface-exposed P redox sites.
RESUMO
Two-dimensional (2D) heteronanosheets are currently the focus of intense study due to the unique properties that emerge from the interplay between two low-dimensional nanomaterials with different properties. However, the properties and new phenomena based on the two 2D heteronanosheets interacting in a 3D hierarchical architecture have yet to be explored. Here, we unveil the surface redox charge storage mechanism of surface-exposed WS2 nanosheets assembled in a 3D hierarchical heterostructure using in situ synchrotron X-ray absorption and Raman spectroscopic methods. The surface dominating redox charge storage of WS2 is manifested in a highly reversible and ultrafast capacitive fashion due to the interaction of heteronanosheets and the 3D connectivity of the hierarchical structure. In contrast, compositionally identical 2D WS2 structures fail to provide a fast and high capacitance with different modes of lattice vibration. The distinctive surface capacitive behavior of 3D hierarchically structured heteronanosheets is associated with rapid proton accommodation into the in-plane W-S lattice (with the softening of the E2g bands), the reversible redox transition of the surface-exposed intralayers residing in the electrochemically active 1T phase of WS2 (with the reversible change in the interatomic distance and peak intensity of W-W bonds), and the change in the oxidation state during the proton insertion/deinsertion process. This proposed mechanism agrees with the dramatic improvement in the capacitive performance of the two heteronanosheets coupled in the hierarchical structure.
RESUMO
A novel transparent, flexible, graphene channel floating-gate transistor memory (FGTM) device is fabricated using a graphene oxide (GO) charge trapping layer on a plastic substrate. The GO layer, which bears ammonium groups (NH3+), is prepared at the interface between the crosslinked PVP (cPVP) tunneling dielectric and the Al2 O3 blocking dielectric layers. Important design rules are proposed for a high-performance graphene memory device: (i) precise doping of the graphene channel, and (ii) chemical functionalization of the GO charge trapping layer. How to control memory characteristics by graphene doping is systematically explained, and the optimal conditions for the best performance of the memory devices are found. Note that precise control over the doping of the graphene channel maximizes the conductance difference at a zero gate voltage, which reduces the device power consumption. The proposed optimization via graphene doping can be applied to any graphene channel transistor-type memory device. Additionally, the positively charged GO (GO-NH3+) interacts electrostatically with hydroxyl groups of both UV-treated Al2 O3 and PVP layers, which enhances the interfacial adhesion, and thus the mechanical stability of the device during bending. The resulting graphene-graphene oxide FGTMs exhibit excellent memory characteristics, including a large memory window (11.7 V), fast switching speed (1 µs), cyclic endurance (200 cycles), stable retention (10(5) s), and good mechanical stability (1000 cycles).
RESUMO
Graphene aerogel is a relatively new type of aerogel that is ideal for energy storage applications because of its large surface area, high electrical conductivity and good chemical stability. Also, three dimensional interconnected macropores offer many advantages such as low density, fast ion and mass transfer, and easy access to storage sites. Such features allow graphene aerogels to be intensively applied for electrochemical capacitor applications. Despite the growing interest in graphene aerogel-based electrochemical capacitors, however, the graphene aerogels still suffer from their low capacitive performances and high fragility. Both relatively low capacitance and brittleness of physically crosslinked graphene aerogels remain a critical challenge. Until now, a number of alternative attempts have been devoted to overcome these shortcomings. In this perspective, we summarize the recent research progress towards the development of advanced graphene aerogel-based electrochemical capacitors according to the different approaches (e.g. porosity, composition and structure controls). Then, the recently proposed chemical strategies to improve the capacitive performances and mechanical durability of graphene aerogels for practical applications are highlighted. Finally, the current challenges and perspectives in this emerging material are also discussed.
RESUMO
Charged natural chalcopyrite (CuFeS2, Ncpy) was developed for a three-dimensional electrochemical nitrate reduction (3D ENO3-RR) system with carbon fiber cloth cathode and Ti/IrO2 anode and Zn-NO3- battery. The 3D ENO3-RR system with Ncpy particle electrodes (PEs) possessed superior nitrate removal of 95.6 % and N2 selectivity of 76 % with excellent reusability under a broad pH range of 2-13 involving heterogeneous and homogeneous radical mechanisms. The Zn-NO3- battery with Ncpy cathode delivered an open-circuit voltage of 1.03 V and a cycling stability over 210 h. It was found that Ncpy PEs functioned through self-oxidation, surface dynamic reconstruction (Cu1.02Fe1.0S1.72O1.66 to Cu0.61Fe1.0S0.27O2.98), intrinsic micro-electric field (CuI, S2- anodic and FeIII cathodic poles), and reactive species (â¢OH, SO4â¢-, 1O2, â¢O2- and â¢H) generation. Computational analyses reveal that CuFeS2(112) surface with the lowest surface energy preferentially exposes Fe and Cu atoms. Cu site is beneficial for reducing NO3- to NO2-, Fe and Fe-Cu dual sites are conducive to N2 selectivity, lowering the overall reaction barriers. It paves the way for selective NO3- reduction in wastewater treatment and can be further extended to energy storage devices by utilizing low-cost Ncpy.
RESUMO
The development of a cost-competitive and efficient electrocatalyst is both attractive and challenging for hydrogen production by hydrogen evolution reaction (HER). Herein, a facile glycol reduction method to construct Ru nanoclusters coupled with hierarchical exfoliated-MXene/reduced graphene oxide architectures (Ru-E-MXene/rGA) is reported. The hierarchical structure, formed by the self-assembly of graphene oxides, can effectively prohibit the self-stacking of MXene nanosheets. Meanwhile, the formation of the MXene/rGA interface can strongly trap the Ru3+ ions, resulting in the uniform distribution of Ru nanoclusters within Ru-E-MXene/rGA. The boosted catalytic activity and underlying catalytic mechanism during the HER process are proved by density functional theory. Ru-E-MXene/rGA exhibits overpotentials of 42 and 62 mV at 10 mA cm-2 in alkaline and acidic electrolytes, respectively. The small Tafel slope and charge transfer resistance (Rct) values elucidate its fast dynamic behavior. The cyclic voltammetry (CV) curves and chronoamperometry test confirm the high stability of Ru-E-MXene/rGA. These results demonstrate that coupling Ru nanoclusters with the MXene/rGA heterostructure represents an efficient strategy for constructing MXene-based catalysts with enhanced HER activity.
RESUMO
Herein, hierarchically structured microgrid frameworks of Co3O4 and carbon composite deposited on reduced graphene oxide (Co3O4@C/rGO) are demonstrated through the three-dimensioinal (3D) printing method, where the porous structure is controllable and the height and width are scalable, for dendrite-free Na metal deposition. The sodiophilicity, facile Na metal deposition kinetics, and NaF-rich solid electrolyte interphase (SEI) formation of cubic Co3O4 phase are confirmed by combined spectroscopic and computational analyses. Moreover, the uniform and reversible Na plating/stripping process on 3D-printed Co3O4@C/rGO host is monitored in real time using in situ transmission electron and optical microscopies. In symmetric cells, the 3D printed Co3O4@C/rGO electrode achieves a long-term stability over 3950 at 1 mA cm-2 and 1 mAh cm-2 with a superior Coulombic efficiency (CE) of 99.87% as well as 120 h even at 20 mA cm-2 and 20 mAh cm-2, far exceeding the previously reported carbon-based hosts for Na metal anodes. Consequently, the full cells of 3D-printed Na@Co3O4@C/rGO anode with 3D-printed Na3V2(PO4)3@C-rGO cathode (≈15.7 mg cm-2) deliver the high specific capacity of 97.97 mAh g-1 after 500 cycles with a high CE of 99.89% at 0.5 C, demonstrating the real operation of flexible Na metal batteries.
RESUMO
Intrinsic impediments, namely weak mechanical strength, low ionic conductivity, low electrochemical performance, and stability have largely inhibited beyond practical applications of hydrogels in electronic devices and remains as a significant challenge in the scientific world. Here, we report a biospecies-derived genomic DNA hybrid gel electrolyte with many synergistic effects, including robust mechanical properties (mechanical strength and elongation of 6.98â MPa and 997.42%, respectively) and ion migration channels, which consequently demonstrated high ionic conductivity (73.27â mS/cm) and superior electrochemical stability (1.64â V). Notably, when applied to a supercapacitor the hybrid gel-based devices exhibit a specific capacitance of 425 F/g. Furthermore, it maintained rapid charging/discharging with a capacitance retention rate of 93.8% after â¼200,000 cycles while exhibiting a maximum energy density of 35.07 Wh/kg and a maximum power density of 193.9â kW/kg. This represents the best value among the current supercapacitors and can be immediately applied to minicars, solar cells, and LED lightning. The widespread use of DNA gel electrolytes will revolutionize human efforts to industrialize high-performance green energy.
RESUMO
Lithium polymer batteries (LPBs) with a high energy density and safety are being actively studied for their use as an energy storage system. However, bottlenecks to their development include charge-transport resistance and poor interfacial contact. In this paper, we introduce carbon nanofiber (CNF) as a conductive additive and the optimization of porosity in the electrode by calendering to realize a high loading density LPB. A simple dispersion strategy is applied to homogeneously disperse nanofiber additives in the electrode to achieve high electronic conductivity. Calendering with optimized pressing degree was performed on the CNF-based electrode to enhance lithium-ion transport and electron conduction in the LPB. The optimal pressing conditions were confirmed by measuring the electronic conductivity, internal resistance, lithium-ion diffusion coefficient, and charge transport characteristics of the cells. When the electrode was pressed by 35%, optimum electrode wettability by solid polymer electrolyte and contact between particles and current collector were achieved, resulting in the high performance of the LPB. Finally, at the optimized pressing degree, we successfully demonstrate 90% cycle retention during 100 cycles and an improvement of the volumetric energy density by over seven-fold.
RESUMO
Recently, anion storage materials have gained significant attention owing to the widened cell voltage and additional anion storing capacity for a large energy density. MXenes are considered as the emerging anion storing materials owing to their sufficient interlayer spacing, rich surface chemistries, tunable structures, remarkable electrochemical properties, and mechanical integrity. Herein, a comprehensive review on the anion storage of MXenes covering their anion storage mechanism and state-of-the-art chemical strategies for the improved anion storage performances is reported. The recent progress of MXenes on aluminum ion batteries, metal halogen batteries, halogen ion batteries, and electrochemical electrode deionization is addressed. The scientific and technical challenges and the research direction into the anion storage of MXenes are also addressed and finally the authors' perspective on anion storage of MXenes is provided. Therefore, this review offers an insight into the rational design of MXenes for anion storage materials and the correlation of surface chemistries and structural modifications with anion storage properties for the applications into electrochemical energy storage and water purification.
RESUMO
Herein, we demonstrate an inorganic-organic double network gel electrolyte consisting of a silica particle network and a poly-2-hydroxyethyl methacrylate network in which 1-butyl-3-methylimidazolium tetrafluoroborate ionic liquids are confined. The as-synthesized double network ionogel electrolytes exhibited high ion conductivity of 3.8 to 12.8 mS cm-1 over a wide temperature range of 30 to 150 °C and mechanical integrity with a maximum toughness of 1.8 MJ m-3 at 30 °C. These remarkable properties of the ionogel were associated with the formation of an optimal physical network of the silica nanoparticles in the colloidal dispersion. Accordingly, a flexible supercapacitor using ionogel electrolytes and reduced graphene oxide electrodes delivered energy and power densities of 48 Wh kg-1 and 4 kW kg-1, respectively, even at a high temperature of 120 °C, demonstrating excellent long-term stability that retains 93% of the initial capacitance even over 10,000 charge/discharge cycles at 120 °C.
RESUMO
Recently, intercalation pseudocapacitance has received significant interest as an abnormal charge storage mechanism owing to the battery-like intercalation energy storage into the bulk electrodes and the fast charge storage kinetics of electrochemical capacitors. However, intercalation pseudocapacitance of molybdenum-based polyoxometalates (POMs) for high-performance Zn ion battery (ZIB) cathodes is yet to be exploited. Herein, we demonstrate the fast and reversible intercalation pseudocapacitance of vanadium-substituted Keggin-type molybdenum-based POMs (XPMoV), where H of HPMoV is replaced by X cations (X = Li, Na, K, or Rb). This cation exchange allows cation-exchanged XPMoV to exhibit the morphological evolution into an anisotropic rodlike structure and to achieve a pillar effect on the improved chemical and structural integrity. Despite the micron-size rod morphology and the contracted lattice of (100) plane, the intercalation pseudocapacitance kinetics of XPMoV was dominated by the fast surface-confined electrochemistry and became highly reversible after the 1st cycle activation process by co-intercalation of Li+ and Zn2+ ions. Therefore, the ZIB with the KPMoV cathode delivered a high rate capability of 74.0 mAh g-1 at 20,000 mA g-1 and 87% capacity retention over 2000 cycles at 1000 mA g-1, far exceeding HPMoV and other Mo-based cathodes. This study paves the way to design the fast and reversible intercalation pseudocapacitance of POMs and the cation exchange chemistry into the improved (electro)chemical and structural integrity.
RESUMO
Si is considered as the promising anode materials for lithium-ion batteries (LIBs) owing to their high capacities of 4200 mAh g-1 and natural abundancy. However, severe electrode pulverization and poor electronic and Li-ionic conductivities hinder their practical applications. To resolve the afore-mentioned problems, we first demonstrate a cation-mixed disordered lattice and unique Li storage mechanism of single-phase ternary GaSiP2 compound, where the liquid metallic Ga and highly reactive P are incorporated into Si through a ball milling method. As confirmed by experimental and theoretical analyses, the introduced Ga and P enables to achieve the stronger resistance against volume variation and metallic conductivity, respectively, while the cation-mixed lattice provides the faster Li-ionic diffusion capability than those of the parent GaP and Si phases. The resulting GaSiP2 electrodes delivered the high specific capacity of 1615 mAh g-1 and high initial Coulombic efficiency of 91%, while the graphite-modified GaSiP2 (GaSiP2@C) achieved 83% of capacity retention after 900 cycles and high-rate capacity of 800 at 10,000 mA g-1. Furthermore, the LiNi0.8Co0.1Mn0.1O2//GaSiP2@C full cells achieved the high specific capacity of 1049 mAh g-1 after 100 cycles, paving a way for the rational design of high-performance LIB anode materials.
RESUMO
Despite the academic and industrial importance of the chemical reaction between carbon dioxide (CO(2)) and alkanolamine, the delicate and precise monitoring of the reaction dynamics by conventional one-dimensional (1D) spectroscopy is still challenging, due to the overlapped bands and the restricted static information. Herein, we report two-dimensional infrared correlation spectroscopy (2D IR COS) and principal component analysis (PCA) on the reaction dynamics of a sterically hindered amine, 2-[(1,1-dimethylethyl)amino]ethanol (TBAE) and CO(2). The formation of carbonate rather than carbamate species, which contribute to the unusual high working capacity of â¼1 mole CO(2) per mole of TBAE at 40 °C, occurs through deprotonation of the hydroxyl group, protonation on the nitrogen atom of the amino group, and formation of a carbonate species due to the steric hindrance of the tert-butyl group. In particular, PCA captures the chemical transition into a carbonate species and the main contributions of ν(CO(2)), ν(OH), ν(C - N), and ν(C=O) bands to the carbonation, while 2D IR COS verifies the interrelation of four bands and their changes. Therefore, these results provide a powerful analytic method to understand the complex and abnormal reaction dynamics as well as the rational design strategy for the CO(2) absorbents.