In Situ Activatable Nitrobenzene-Cysteine-Copper(II) Nano-complexes for Programmed Photodynamic Cancer Therapy.

Photodynamic therapy (PDT) has been used to reduce cancerous and precancerous cells via reactive oxygen species (ROS) generation from photosensitizers. Numerous photosensitizers are available today to treat a variety of diseases, but their therapeutic efficacy is hindered within the tumor microenvironment, and there are safety concerns associated with their non-specific activation. In this work, we disclosed a nano-therapeutic based on in situ activatable nitrobenzene-cysteine-copper(II) nano-complexes (NCCNs) that work within cancer cells. Among the NCCNs, CyP shows outstanding potential as a promising candidate for programmed photodynamic cancer therapy with its unique properties such as (i) bright near-infrared imaging, (ii) chemodynamic therapeutic effect, (iii) photodynamic therapeutic effect (types I and II), and (iv) anti-cancer effect by anti-angiogenesis in early cancer stage under light. Overall, this work opens up exciting possibilities for the development of innovative and effective treatments for cancer, paving the way for future advancements in the clinical medicine field.

Simplified Y6-Based Nonfullerene Acceptors: In-Depth Study on Molecular Structure-Property Relation, Molecular Dynamics Simulation, and Charge Dynamics.

Two new Y6 derivatives of symmetrical YBO-2O and asymmetrical YBO-FO nonfullerene acceptors (NFAs) are prepared with a simplified synthetic procedure by incorporating octyl and fluorine substituents onto the terminal 2-(3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile (INCN) moiety. By moving the alkyl substituents on the Y6 core to the terminal INCN moiety, the lowest unoccupied molecular orbital of the YBO NFAs increases without decreasing solubility, resulting in high open-circuit voltages of the devices. Molecular dynamics simulation shows that YBO-2O/-FO preferentially form core-core and terminal-terminal dimeric interactions, demonstrating their tighter packing structure and higher electron mobility than Y6, which is consistent with 2D grazing incidence X-ray scattering and space charge limited current measurements. In blend films, the hole transfer (HT) from YBO-2O/-FO to the polymer donor PM6 is studied in detail by transient absorption spectroscopy, demonstrating efficient HT from YBO-FO to PM6 with their suitable energy level alignment. Despite the simplified synthesis, YBO-FO demonstrates photovoltaic performance similar to that of Y6, exhibiting a power conversion efficiency of 15.01%. Overall, this design strategy not only simplifies the synthetic procedures but also adjusts the electrical properties by modifying the intermolecular packing and energy level alignment, suggesting a novel simplified molecular design of Y6 derivatives.

Janus-Type ESIPT Chromophores with Distinctive Intramolecular Hydrogen-bonding Selectivity.

Excited-state intramolecular proton transfer (ESIPT)-based solid luminescent materials with multiple hydrogen bond acceptors (HBAs) remain unexplored. Herein, we introduced a family of Janus-type ESIPT chromophores featuring distinctive hydrogen bond (H-bond) selectivity between competitive HBAs in a single molecule. Our investigations showed that the central hydroxyl group preferentially forms intramolecular H-bonds with imines in imine-modified 2-hydroxyphenyl benzothiazole (HBT) chromophores but tethers the benzothiazole moiety in hydrazone-modified HBT chromophores. Imine-derived HBTs generally exhibit higher fluorescence efficiency, while hydrazone-derived HBTs show a reduced overlap between the absorption and fluorescence bands. Quantum chemical calculations unveiled the molecular origins of the biased intramolecular H-bonds and their impact on the ESIPT process. This Janus-type ESIPT chromophore skeleton provides new opportunities for the design of solid luminescent materials.

Development of a fluorescent nanoprobe based on an amphiphilic single-benzene-based fluorophore for lipid droplet detection and its practical applications.

Lipid droplets (LDs) are crucial biological organelles connected with metabolic pathways in biological systems and diseases. To monitor the locations and accumulation of LDs in lipid-related diseases, the development of a visualization tool for LDs has gained importance. In particular, LD visualization using fluorescent probes has gained attention. Herein, a new fluorescent nanoprobe, BMeS-Ali, is developed that can sense LDs based on an amphiphilic single benzene-based fluorophore (SBBF). BMeS-Ali consists of hydrophilic (-NH2) and hydrophobic (-C12H25) moieties and exists as a micelle nanostructure in aqueous media. BMeS-Ali has a weak fluorescence, but its emission was dramatically enhanced upon exposure to the LD components such as oleic acids (OA) by reassembling its nano-formulation. BMeS-Ali showed a selective LD staining ability and great biocompatibility in cells (cancer cells and stem cells). It also showed a practical sensing ability towards biologically derived lipids and can be applied to the visualization of human fingerprints. We found that the nanoprobe BMeS-Ali has significant potential to serve as a practical dye and sensor for lipids, especially for LD imaging in the biomedical research area and broader industrial applications.

Beyond Woodward-Fieser Rules: Design Principles of Property-Oriented Chromophores Based on Explainable Deep Learning Optical Spectroscopy.

An adequate understanding of molecular structure-property relationships is important for developing new molecules with desired properties. Although deep learning optical spectroscopy (DLOS) has been successfully applied to predict the optical and photophysical properties of organic chromophores, how specific functional groups and solvents affect the optical properties is not clearly understood. Here, we employed an explainable DLOS method by applying the integrated gradients method to DLOS. The integrated gradients method allows us to obtain attributions, indicating how much the functional group contributes to the optical properties including the absorption wavelength and bandwidth, extinction coefficients, emission wavelength and bandwidth, photoluminescence quantum yield, and lifetime. The attributions of 54 functional groups and 9 solvent molecules to seven optical properties are quantified and can be used to estimate the optical properties of chromophores as in the Woodward-Fieser rule. Unlike the Woodward-Fieser rule for only the absorption wavelength, the attributions obtained in this work can be applied to estimate all seven optical properties, which makes a significant extension of the Woodward-Fieser rules. In addition, we demonstrated a strategy for utilizing the attributions in the design of molecules and in tuning the optical properties of the molecules. The design of molecular structures using attributions can revolutionize the development of optimal molecules.

Reliable experimental method for determination of photoacidity revealed by quantum chemical calculations.

Photoacids are aromatic acids that exhibit significantly different acidities when they are electronically excited. Three experimental methods have been extensively used to determine the photoacidity, : fluorescence titration, the Förster cycle, and time-resolved experiments. However, the photoacidities determined by these experimental methods are not consistent. In this work, we used a theoretical method to evaluate the reliability of experimentally determined values. In particular, density functional theory (DFT) and time-dependent DFT calculations were used to obtain the changes in Gibbs free energy for acid dissociation reactions which are directly related to values. The Förster cycle, which is frequently used to experimentally determine the photoacidity due to its simplicity, yielded inconsistent results depending on how the transition energy was defined. We evaluated six empirical parameters extracted from the absorption and emission spectra of acidic and basic species of photoacids to adequately define the transition energy in the Förster cycle. And we found that the values obtained using the optical bandgap as the transition energy in the Förster cycle were in the best agreement with the results of quantum chemical calculations.

Ligand-Assisted Direct Photolithography of Perovskite Nanocrystals Encapsulated with Multifunctional Polymer Ligands for Stable, Full-Colored, High-Resolution Displays.

Micropatterns with a high stability, definition, and resolution are an absolute requirement in advanced display technology. Herein, patternable perovskite nanocrystals (PNCs) with excellent stability were prepared by exchanging pristine ligands with multifunctional polymer ligands, poly(2-cinnamoyloxyethyl methacrylate). The polymer backbone contains a cinnamoyl group that has been widely employed as a photo-cross-linker under 365 nm UV irradiation. Also, the terminal group is readily adjustable among NH3Cl, NH3Br, and NH3I, allowing us to obtain multicolored PNCs via instant anion exchange. Furthermore, the resulting ligand exchanged PNCs exhibited enhanced stability toward polar solvents without any undesirable influence on the structural or optical properties of the PNCs. Using anion exchanged PNCs, RGB microarrays with a subpixel size of 10 µm × 40 µm were successfully demonstrated. Our results highlight the versatility and feasibility of a simplified patterning strategy for nanomaterials, which can be generally applied in the fabrication of various optoelectronic devices.

High Resolution Photoexcitation Measurements Exacerbate the Long-Standing Fe XVII Oscillator Strength Problem.

For more than 40 years, most astrophysical observations and laboratory studies of two key soft x-ray diagnostic 2p-3d transitions, 3C and 3D, in Fe XVII ions found oscillator strength ratios f(3C)/f(3D) disagreeing with theory, but uncertainties had precluded definitive statements on this much studied conundrum. Here, we resonantly excite these lines using synchrotron radiation at PETRA III, and reach, at a millionfold lower photon intensities, a 10 times higher spectral resolution, and 3 times smaller uncertainty than earlier work. Our final result of f(3C)/f(3D)=3.09(8)(6) supports many of the earlier clean astrophysical and laboratory observations, while departing by five sigmas from our own newest large-scale ab initio calculations, and excluding all proposed explanations, including those invoking nonlinear effects and population transfers.

Molecular Design of Highly Efficient Heavy-Atom-Free Triplet BODIPY Derivatives for Photodynamic Therapy and Bioimaging.

Novel BODIPY photosensitizers were developed for imaging-guided photodynamic therapy. The introduction of a strong electron donor to the BODIPY core through a phenyl linker combined with the twisted arrangement between the donor and the BODIPY acceptor is essential for reducing the energy gap between the lowest singlet excited state and the lowest triplet state (ΔEST ), leading to a significant enhancement in the intersystem crossing (ISC) of the BODIPYs. Remarkably, the BDP-5 with the smallest ΔEST (ca. 0.44 eV) exhibited excellent singlet oxygen generation capabilities in both organic and aqueous solutions. BDP-5 also displayed bright emission in the far-red/near-infrared region in the condensed states. More importantly, both in vitro and in vivo studies demonstrated that BDP-5 NPs displayed a high potential for photodynamic cancer therapy and bioimaging.

An Emerging Molecular Design Approach to Heavy-Atom-Free Photosensitizers for Enhanced Photodynamic Therapy under Hypoxia.

A novel strategy for designing highly efficient and activatable photosensitizers that can effectively generate reactive oxygen species (ROS) under both normoxia and hypoxia is proposed. Replacing both oxygen atoms in conventional naphthalimides (RNI-O) with sulfur atoms led to dramatic changes in the photophysical properties. The remarkable fluorescence quenching (ΦPL ≈ 0) of the resulting thionaphthalimides (RNI-S) suggested that the intersystem crossing from the singlet excited state to the reactive triplet state was enhanced by the sulfur substitution. Surprisingly, the singlet oxygen quantum yield of RNI-S gradually increased with increasing electron-donating ability of the 4-R substituents (MANI-S, ΦΔ ≈ 1.00, in air-saturated acetonitrile). Theoretical studies revealed that small singlet-triplet energy gaps and large spin-orbit coupling could be responsible for the efficient population of the triplet state of RNI-S. In particular, the ROS generation ability of MANI-S was suppressed under physiological conditions due to their self-assembly and was significantly recovered in cancer cells. More importantly, cellular experiments showed that MANI-S still produced a considerable amount of ROS even under severely hypoxic conditions (1% O2) through a type-I mechanism.

Covalently Linked Perylene Diimide-Polydiacetylene Nanofibers Display Enhanced Stability and Photocurrent with Reversible FRET Phenomenon.

Because of their unique structural and optical properties, 1D perylene diimide (PDI) derivatives have gained attention for use in optoelectronic devices. However, PDI-containing self-assembled supramolecular systems often are of limited use because they have supramolecular architectures that are held together by weak noncovalent π-π stacking, hydrogen bonding, and hydrophobic interactions. As a result, they are intrinsically unstable under solution-processing conditions. To overcome this limitation, a polydiacetylene (PDA)-based strategy is developed to construct a solvent-resistant and stable PDI assembly. For this purpose, first the monomer PDI-BisDA is generated, in which two polymerizable diacetylene (DA) units are covalently linked to a PDI core. Importantly, 254 nm UV irradiation of self-assembled PDI-BisDA nanofibers forms solvent-resistant and stable PDI-PDA fibers. Owing to the presence of PDA, the generated polymer fibers display an increased photocurrent. In addition, the existence of PDA and PDI moieties in the fiber leads to the occurrence of switchable on-off fluorescence resonance energy transfer (FRET) between the PDI and reversibly thermochromic PDA chromophores.

Origin of strong red emission in Er3+-based upconversion materials: role of intermediate states and cross relaxation.

Among the various upconversion (UC) materials, sodium yttrium fluoride doped with ytterbium and erbium (NaYF4:Yb3+,Er3+) is the most widely studied owing to its high UC efficiency. Nonetheless, UC mechanisms are not yet fully understood and, in particular, near-infrared-to-red UC mechanisms are still under debate. Herein, we examine UC mechanisms in Er3+-based UC materials. Most importantly, the 4F3/2 and 4F5/2 states of Er3+ were found to be important intermediate states for strong red emission, for the first time. The cross relaxation between the Er3+ ions, back energy transfer from Er3+ to Yb3+, and relative doping concentrations of Er3+ and Yb3+ in NaYF4:Yb3+,Er3+ were found to play important roles in the relative intensity between red and green emissions. The proposed UC mechanism will provide design principles for various Er3+-based UC materials.

A bright blue fluorescent dextran for two-photon in vivo imaging of blood vessels.

Fluorescence-based in vivo imaging is one of the most important tools for monitoring of biological processes in cells and tissues of live animal models. Fluorescence imaging agents have also been used to monitor the microcirculation. Tracking microcirculation of the blood is vital to gain further insight into various vascular disease-related anomalies within the human body. As monitoring of vascular circulation is performed with visualization of both immune cells and pathogens, which are mainly labelled with red and green, the favorable color option for blood vessels could be blue. However, currently available blueish color-labeled agents for vascular monitoring is generally confronted with quick bleaching, because of its short excitation and emission wavelengths. Hereby, what we propose in this report is a newly generated bright blue fluorescent dextran, named HCD-70K that monitors the blood vessels using blue and inter-compatible typical fluorescent materials. DBCO-functionalized dextran-70K was fabricated with hydroxy-coumarin dye via metal-free bioorthogonal click chemistry, and generated HCD-70K, which can flow within the blood vessel and decipher the whole structure of the blood vessel successfully. The synthesis, spectroscopic analysis, and quantum chemical calculations were conducted. Using two-photon microscopy, efficient deep in vivo blood vessel imaging of a mouse model revealed exceptional bio-imaging capabilities of the HCD-70K and consequently it provided a promising opportunity for efficient vascular visualization in various research areas.

A Schiff Base Fluorescence Enhancement Probe for Fe(III) and Its Sensing Applications in Cancer Cells.

We report a new Schiff base fluorescent probe which senses ferric ion, Fe(III), with a significant fluorescence enhancement response. The probe showed high sensitivity (0.8 ppb), and fast response time (<10 s) of Fe(III) in aqueous media. In addition, the probe showed the ability to sense Fe(III) in a HeLa cancer cell line, with very low cytotoxicity. As a new bio-imaging probe for Fe(III), it gave bright fluorescent images in confocal laser scanning microscopy (CLSM).

Elucidating the Role of Molecule-Electrode Interfacial Defects in Charge Tunneling Characteristics of Large-Area Junctions.

Interfacial chemistry at organic-inorganic contact critically determines the function of a wide range of molecular and organic electronic devices and other systems. The chemistry is, however, difficult to understand due to the lack of easily accessible in-operando spectroscopic techniques that permit access to interfacial structure on a molecular scale. Herein, we compare two analogous junctions formed with identical organic thin film and different liquid top-contacts (water droplet vs eutectic gallium indium alloy) and elucidate the puzzling interfacial characteristics. Specifically, we fine-tune the surface topography of the organic surface using mixed self-assembled monolayers (SAMs): single component SAM composed of rectifier (2,2'-bipyridyl-terminated n-undecanethiolate; denoted as SC11BIPY) is systematically diluted with nonrectifying n-alkanethiolates of different lengths (denoted as SC n where n = 8, 10, 12, 14, 16, 18). Characterization of the resulting mixed SAMs in wettability and tunneling currents with the two separate liquid top-contacts allows us to investigate the role of phase segregation and gauche defect in the SAM//liquid interfaces. The results reported here show the difference in length between SC11BIPY and SC n is translated into nanoscopic pits and gauche-conformer defects on the surface, and the difference in contact force-hydrostatic vs user pressures-and hence conformity of contact account for the difference in wettability and rectification behaviors. Our work provides an insight into the role of molecule-electrode interfacial defects in performance of molecular-scale electronic devices.

Fluorescent Labeling of Protein Using Blue-Emitting 8-Amino-BODIPY Derivatives.

8-Amino-BODIPY (boron-dipyrromethane) dyes show bright blue fluorescence. Disclosed here are synthesis and characterization of the photophysical properties of a series of functionalized 8-Amino-BODIPY (BP1-4) for protein labeling. The compact structure and solvent-insensitive absorption property of the dye are desirable features for protein labeling. For the model protein, bovine serum albumin (BSA), the labeling proceeds under mild condition via amide bond formation or thiol-ene conjugation with maintaining the bright blue fluorescence. The chromatography and mass spectroscopy analysis clearly support the labeling of the BODIPY dye on the BSA. The protein labeling with blue-emitting BODIPY would be applicable for studying protein dynamics and fluorescence resonance energy transfer (FRET) with intrinsic biomolecules.

Ionic effects on the proton transfer mechanism in aqueous solutions.

Proton dissociation (PD) reactions of weak acids and proton transfer (PT) processes in aqueous solutions are strongly influenced by ions. However, a detailed molecular picture that describes how ions affect the rates of PD and PT processes is still missing. Here, we utilize time-resolved fluorescence spectroscopy combined with quantum chemical calculations to investigate the excited-state proton transfer (ESPT) reaction of a photoacid in aqueous metal chloride solutions. The activation energy (Ea) for the ESPT of the photoacid increases with increasing charge density of cations (ρcat). The local hydrogen bond (H-bond) structure of the photoacid in the ionic hydration shell is strongly related to both the Ea and the ρcat. Most importantly, the proton's positive charge in the transition state, which is delocalized through the H-bonded water channel, is more destabilized with an increase in the ρcat, leading to a higher Ea. Our experimental and computational results allow us to elucidate the underlying mechanism for the ionic effect on PD and the subsequent PT process at the molecular level.

Effect of ion-ligand binding on ion pairing dynamics studied by two-dimensional infrared spectroscopy.

Cation-specific ion pairing dynamics between M+ (M = Ag or Cu) and SCN- in N,N-dimethylthioformamide (DMTF) are studied by probing the nitrile (CN) stretching vibration. The SCN- ion, which is an ambidentate ligand, readily associates with cations to form two different types of contact ion pairs (CIPs) (i.e., M-SCN or M-NCS) and its CN stretching frequency is significantly blue-shifted so that free SCN- and CIPs can be well-distinguished in the FTIR spectra. Interestingly, Ag+ ions prefer the formation of Ag-SCN in DMTF (Ag+ + SCN- ⇋ Ag-SCN) but Cu+ ions form Cu-NCS (Cu+ + SCN- ⇋ Cu-NCS). We have studied the effect of ion-ligand binding on the ion pairing equilibria and dynamics in great detail by using FTIR, IR pump-probe (IR PP), and two-dimensional infrared (2DIR) spectroscopy combined with quantum chemical calculations. First, our quantum chemical calculations corroborate that Ag-SCN and Cu-NCS of the two possible CIP configurations (M-SCN or M-NCS) are energetically stable and favored in DMTF. Second, the thermodynamic properties (ΔH and ΔS) of ion pairing equilibria are determined by temperature-dependent FTIR experiments. Finally, IR PP and 2DIR experiments are used to measure the association and dissociation rate constants. The ion pairing dynamics between Cu+ and SCN- are found to occur on much faster timescales than those between Ag+ and SCN-. Our current results provide important insights into understanding the effect of ion-ligand binding on the ion pairing equilibria and dynamics in polar solvents.

Electronic relaxation dynamics of PCDA-PDA studied by transient absorption spectroscopy.

Photo-curable polymers originating from 10,12-pentacosadiynoic acid (PCDA-PDA) are commonly used polydiacetylenes (PDAs). PCDA-PDA exhibits thermochromic properties undergoing a unique colorimetric transition from blue to red as the temperature is increased from low to high. In this work, we have carefully studied the temperature-dependent optical properties of PCDA-PDA by using UV-visible absorption, FTIR, Raman, and transient absorption (TA) spectroscopy in combination with quantum chemical calculations. Temperature-dependent UV-visible absorption spectra indicate that PCDA-PDA exhibits reversible thermochromic properties up to 60 °C and its thermochromic properties become irreversible above 60 °C. Such distinct thermochromic properties are also manifested in TA signals so that the electronically excited PCDA-PDA relaxes to the ground state via an intermediate state at 20 °C (blue form) but it relaxes directly back to the ground state at 80 °C (red form). The electronic relaxation dynamics of PCDA-PDA are comprehensively analyzed based on different kinetic models by using the global fitting analysis method. The intermediate state in the blue form of PCDA-PDA is clearly found to be responsible for fluorescence quenching. FTIR and Raman spectroscopy and quantum chemical calculations confirm that the H-bonds between the carboxylic acid groups in PCDA-PDA are broken at high temperatures leading to an irreversible structural change of PCDA-PDA.

Complexation dynamics of CH3SCN and Li(+) in acetonitrile studied by two-dimensional infrared spectroscopy.

Ion-molecule complexation dynamics were studied with CH3SCN and Li(+) in acetonitrile by vibrationally probing the nitrile stretching vibration of CH3SCN. The nitrile stretching vibration of CH3SCN has a long lifetime (T1 = ∼90 ps) and its frequency is significantly blue-shifted when CH3SCN is bound with Li(+) ions to form a CH3SCNLi(+) complex in acetonitrile. Such spectral properties enable us to distinguish free CH3SCN and the CH3SCNLi(+) complex in solutions and measure their dynamics occurring on hundred picosecond timescales. For the complexation between CH3SCN and Li(+) in acetonitrile, the change in enthalpy (ΔH = -7.17 kJ mol(-1)) and the change in entropy (ΔS = -34.4 J K(-1) mol(-1)) were determined by temperature-dependent FTIR experiments. Polarization-controlled infrared pump-probe (IR PP) spectroscopy was used to measure the population decay and orientational dynamics of free CH3SCN and the CH3SCNLi(+) complex. Especially, the orientational relaxation of the CH3SCNLi(+) complex was found to be almost 3 times slower than those of free CH3SCN because Li(+) ions strongly interact with the neighboring solvents. Most importantly, the complexation dynamics of CH3SCN and Li(+) in acetonitrile were successfully measured in real time by 2DIR spectroscopy for the first time and the dissociation and association time constants were directly determined by using the two-species exchange kinetic model. Our experimental results provide a comprehensive overview of the ion-molecule complexation dynamics in solutions occurring under thermal equilibrium conditions.