Frequency dependence of nanorod self-alignment using microfluidic methods.

Dielectrophoresis is a potential candidate for aligning nanorods on electrodes, in which the interplay between electric fields and microfluidics is critically associated with its yield. Despite much of previous work on dielectrophoresis, the impact of frequency modulation on dielectrophoresis-driven nanorod self-assembly is insufficiently understood. In this work, we systematically explore the frequency dependence of the self-alignment of silicon nanorod using a microfluidic channel. We vary the frequency from 1kHz to 1000 kHz and analyze the resulting alignments in conjunction with numerical analysis. Our experiment reveals an optimal alignment yield at approximately 100 kHz, followed by a decrease in alignment efficiency. The nanorod self-alignments are influenced by multiple consequences, including the trapping effect, induced electrical double layer, electrohydrodynamic flow, and particle detachment. This study provides insights into the impact of frequency modulation of electric fields on the alignment of silicon nanorods using dielectrophoresis, broadening its use in various future nanotechnology applications.

Modulation of thermal and thermoelectric transport in individual carbon nanotubes by fullerene encapsulation.

The potential impact of encapsulated molecules on the thermal properties of individual carbon nanotubes (CNTs) has been an important open question since the first reports of the strong modulation of electrical properties in 2002. However, thermal property modulation has not been demonstrated experimentally because of the difficulty of realizing CNT-encapsulated molecules as part of thermal transport microstructures. Here we develop a nanofabrication strategy that enables measurement of the impact of encapsulation on the thermal conductivity (κ) and thermopower (S) of single CNT bundles that encapsulate C 60, Gd@C 82 and Er 2@C 82. Encapsulation causes 35-55% suppression in κ and approximately 40% enhancement in S compared with the properties of hollow CNTs at room temperature. Measurements of temperature dependence from 40 to 320 K demonstrate a shift of the peak in the κ to lower temperature. The data are consistent with simulations accounting for the interaction between CNTs and encapsulated fullerenes.

Feasibility of Charcoal Tattooing for Localization of Metastatic Lymph Nodes in Robotic Selective Neck Dissection for Papillary Thyroid Carcinoma.

BACKGROUND: This study aimed to evaluate the feasibility and effectiveness of ultrasound-guided charcoal tattooing in locating metastatic lymph nodes in robotic selective neck dissection (SND) for papillary thyroid carcinoma (PTC). METHODS: The overall study group comprised 21 patients with PTC who underwent robotic SND via a unilateral transaxillary approach for treatment of suspicious lymph node metastasis in the lateral compartment. Charcoal suspension was injected into 10 of the patients (total of 23 lesions) 1 day before robotic SND. The authors evaluated the location of the tattoos, the success rate of localization, the intraoperative detection rate, and the complications associated with the procedure. The perioperative results were compared with those in the control group of 11 patients who did not receive charcoal tattooing. RESULTS: Charcoal suspension was successfully injected into 22 of the 23 suspicious lymph nodes (95.7 %). The remaining lesion was located posterior to the internal jugular vein. Therefore, the charcoal was injected into the soft tissue around the lymph node. Ultrasound-guided injections were well tolerated in all the patients, and no major complications occurred. All the charcoal-tattooed lesions were identified intraoperatively by the surgeon. The number of harvested and metastatic lymph nodes in the lateral compartment was greater in the patients with charcoal tattoo localization than in the control group. The two groups did not differ in terms of perioperative complications, operation time, or volume of drainage. CONCLUSION: Ultrasound-guided charcoal tattooing for localization of metastatic lymph nodes is feasible and effective in robotic SND for the treatment of PTC with lateral compartment lymph node metastasis.

Observation of Highly Anisotropic Thermal Expansion of Polymer Films.

While dimensional change under thermal loading dictates various device failure mechanisms in soft materials, the interplay between microstructures and thermal expansion remains underexplored. Here, we develop a novel method to directly probe the thermal expansion for nanoscale polymer films using an atomic force microscope as well as confining active thermal volume. In a model system, spin-coated poly(methyl methacrylate), we find that the in-plane thermal expansion is enhanced by 20-fold compared to that along the out-of-plane directions in confined dimensions. Our molecular dynamics simulations show that the collective motion of side groups along backbone chains uniquely drives the enhancement of thermal expansion anisotropy of polymers in the nanoscale limit. This work unveils the intimate role of the microstructure of polymer films on its thermal-mechanical interaction, paving a route to judiciously enhance the reliability in a broad range of thin-film devices.

High Thermal Conductivity of Submicrometer Aluminum Nitride Thin Films Sputter-Deposited at Low Temperature.

Aluminum nitride (AlN) is one of the few electrically insulating materials with excellent thermal conductivity, but high-quality films typically require exceedingly hot deposition temperatures (>1000 °C). For thermal management applications in dense or high-power integrated circuits, it is important to deposit heat spreaders at low temperatures (<500 °C), without affecting the underlying electronics. Here, we demonstrate 100 nm to 1.7 µm thick AlN films achieved by low-temperature (<100 °C) sputtering, correlating their thermal properties with their grain size and interfacial quality, which we analyze by X-ray diffraction, transmission X-ray microscopy, as well as Raman and Auger spectroscopy. Controlling the deposition conditions through the partial pressure of reactive N2, we achieve an ∼3× variation in thermal conductivity (∼36-104 W m-1 K-1) of ∼600 nm films, with the upper range representing one of the highest values for such film thicknesses at room temperature, especially at deposition temperatures below 100 °C. Defect densities are also estimated from the thermal conductivity measurements, providing insight into the thermal engineering of AlN that can be optimized for application-specific heat spreading or thermal confinement.

Skin-Inspired Thermometer Enabling Contact-Independent Temperature Sensation via a Seebeck-Resistive Bimodal System.

Tactile sensation is a powerful method for probing the temperature of an arbitrary object due to its intuitive operating mechanism. However, the disruptive interface commonly formed between the thermometer and the object gives rise to thermal contact resistance, which is the primary source of measurement inaccuracy. Here, we develop a bioinspired bimodal temperature sensor exhibiting robust measurement accuracy by precisely decoupling contact resistance from the associated thermal circuit. In our sensors, a micropatterned resistive thermometer is placed underneath a thermoelectric heat fluxmeter, which resembles thermoreceptors located in human biomembranes. The object temperature is probed by modulating the thermometer temperature within the sensor system and precisely extrapolating the zero-heat flux point of the Seebeck voltage developed across the fluxmeter. At this zero-heat flux point, the object and thermometer temperatures coincide with each other regardless of the contact resistance formed at the fluxmeter-object interface. An experimental study shows that our sensors display excellent measurement accuracy within ∼0.5 K over a wide range of contact resistance values. Our work opens up new avenues for highly sensitive tactile thermal sensation in thermal haptics, medical devices, and robotics if combined with flexible devices.

Thermal Characterization of Metal-Oxide Interfaces Using Time-Domain Thermoreflectance with Nanograting Transducers.

Metal-oxide thermal boundary conductance (TBC) strongly influences the temperature rise in nanostructured systems, such as dense interconnects, when its value is comparable to the thermal conductance of the amorphous dielectric oxide. However, the thermal characterization of metal-amorphous oxide TBC is often hampered by the measurement insensitivity of techniques such as time-domain thermoreflectance (TDTR). Here, we use metal nanograting structures as opto-thermal transducers in TDTR to measure the TBC of metal-oxide interfaces. Combined with an ultrafast pump-probe laser measurement approach, the nanopatterned structures amplify the contribution of the thermal boundary resistance (TBR), the inverse of TBC, over the thermal resistance of the adjacent material, thereby enhancing measurement sensitivity. For demonstration purposes, we report the TBC between Al and SiO2 films. We then compare the impact of Al grating dimensions on the measured TBC values, sensitivities, and uncertainties. The grating periods L used in this study range from 150 to 300 nm, and the bridge widths w range from 72 to 205 nm. With the narrowest grating transducers (72 nm), the TBC of Al-SiO2 interfaces is measured to be 159-48+61 MW m-2 K-1, with the experimental sensitivity being 5× higher than that of a blanket Al film. This improvement is attributed to the reduced contribution of the SiO2 film thermal resistance to the temperature signal from TDTR response. The nanograting measurement approach described here is promising for the thermal characterization of a variety of nanostructured metal-amorphous passivation systems and interfaces common in semiconductor technology.

The changes of joint-position sense, peroneal strength, postural control, and functional performance ability after the modified Broström procedure for chronic ankle instability.

Purpose: Residual functional ankle instability regardless of the restoration of mechanical stability after the lateral ligament repair or reconstruction can cause recurrent sprain. The purpose of this study was to identify the sequential changes of joint-position sense, peroneal strength, postural control, and functional performance ability after the modified Broström procedure (MBP) for chronic ankle instability. Methods: A total of 46 patients (46 ankles) who underwent the MBP for chronic ankle instability were eligible for this study and were followed up for 1 year postoperatively. The changes of joint-position sense and peroneal strength were periodically evaluated with an isokinetic dynamometer. Postural control ability was evaluated using a one-leg stance test with eyes closed. The functional performance ability examination comprised a one-leg hop test, a six-meter hop test, and a cross three-meter hop test. Results: The error in joint-position sense significantly improved from a mean 4.3° to 2.8° (p < 0.001). Peak torque for eversion significantly improved from a mean 18.2 Nm to 21.2 Nm (p = 0.024). Balance retention time significantly improved from a mean 4.7 s to 6.4 s (p < 0.001). Among the functional performance tests, only the one-leg hop test showed a significant improvement postoperatively (p = 0.031). At 1 year postoperatively, the recovery ratios compared to the unaffected ankle were 67.9% in joint-position sense (p < 0.001), 86.9% in peroneal strength (p = 0.012), and 74.4% in postural control (p < 0.001), with significant side-to-side differences. Conclusion: Although joint-position sense, peroneal strength, postural control, and functional performance ability were significantly improved after the MBP, recovery ratios compared to the unaffected ankle were insufficient up to 1 year postoperatively. Level of Evidence: Level IV (prospective case series).

Thermal Interface Enhancement via Inclusion of an Adhesive Layer Using Plasma-Enhanced Atomic Layer Deposition.

Interfaces govern thermal transport in a variety of nanostructured systems such as FinFETs, interconnects, and vias. Thermal boundary resistances, however, critically depend on the choice of materials, nanomanufacturing processes and conditions, and the planarity of interfaces. In this work, we study the interfacial thermal transport between a nonreactive metal (Pt) and a dielectric by engineering two differing bonding characters: (i) the mechanical adhesion/van der Waals bonding offered by the physical vapor deposition (PVD) and (ii) the chemical bonding generated by plasma-enhanced atomic layer deposition (PEALD). We introduce 40-cycle (∼2 nm thick), nearly continuous PEALD Pt films between 98 nm PVD Pt and dielectric materials (8.0 nm TiO2/Si and 11.0 nm Al2O3/Si) treated with either O2 or O2 + H2 plasma to modulate their bonding strengths. By correlating the treatments through thermal transport measurements using time-domain thermoreflectance (TDTR), we find that the thermal boundary resistances are consistently reduced with the same increased treatment complexity that has been demonstrated in the literature to enhance mechanical adhesion. For samples on TiO2 (Al2O3), reductions in thermal resistance are at least 4% (10%) compared to those with no PEALD Pt at all, but could be as large as 34% (42%) given measurement uncertainties that could be improved with thinner nucleation layers. We suspect the O2 plasma generates stronger covalent bonds to the substrate, while the H2 plasma strips the PEALD Pt of contaminants such as carbon that gives rise to a less thermally resistive heat conduction pathway.

Protective Effect of Carotenoid Extract from Orange-Fleshed Sweet Potato on Gastric Ulcer in Mice by Inhibition of NO, IL-6 and PGE2 Production.

Ipomoea batatas (L.) Lam., Convolvulaceae is widely distributed in Asian areas from tropical to warm-temperature regions. Their tubers are known for their antioxidant, anti-bacterial, anti-diabetic, wound healing, anti-inflammatory, and anti-ulcer activities. The preventive and therapeutic effects of orange-fleshed sweet potato on gastric ulcers have not been investigated. In this study, the carotenoid extract (CE) of orange-fleshed sweet potato was found to protect against gastric ulcers induced by HCl/ethanol in mice. The anti-inflammatory and antioxidant activities of the carotenoid pigment extract were also evaluated as possible evidence of their protective effects. Administration of CE reduced gastric ulcers. Oral administration of CE (100 mg/kg) protected against gastric ulcers by 78.1%, similar to the positive control, sucralfate (77.5%). CE showed potent reducing power and decreased nitric oxide production in a mouse macrophage cell line, RAW 264.7, in a concentration-dependent manner. The production of the inflammatory cytokine interleukin-6 and prostaglandin E2 was also reduced by CE in a dose-dependent manner. The high carotenoid content of orange-fleshed sweet potato could play a role in its protective effect against gastric ulcers. This result suggests the possibility of developing functional products using this nutrient-fortified material.

Direct Quantification of Heat Generation Due to Inelastic Scattering of Electrons Using a Nanocalorimeter.

Transmission electron microscopy (TEM) is arguably the most important tool for atomic-scale material characterization. A significant portion of the energy of transmitted electrons is transferred to the material under study through inelastic scattering, causing inadvertent damage via ionization, radiolysis, and heating. In particular, heat generation complicates TEM observations as the local temperature can affect material properties. Here, the heat generation due to electron irradiation is quantified using both top-down and bottom-up approaches: direct temperature measurements using nanowatt calorimeters as well as the quantification of energy loss due to inelastic scattering events using electron energy loss spectroscopy. Combining both techniques, a microscopic model is developed for beam-induced heating and to identify the primary electron-to-heat conversion mechanism to be associated with valence electrons. Building on these results, the model provides guidelines to estimate temperature rise for general materials with reasonable accuracy. This study extends the ability to quantify thermal impact on materials down to the atomic scale.

In-Situ Nano-Auger Probe of Chloride-Ions during CH3NH3PbI3-xClx Perovskite Formation.

Organo-halide perovskite solar cells (PSCs) have emerged as next-generation photovoltaics, owing to their high power-conversion efficiency (PCE), lower production cost, and high flexibility. ABX3-structured methylammonium lead triiodide (CH3NH3PbI3 or MAPbI3) perovskite is a widely studied light-absorbing material in PSCs. Interestingly, a small amount of chlorine incorporation into MAPbI3 increases charge carrier diffusion lengths (from 129 nm to 1069 nm), which enables planar structured PSCs with high PCEs. However, existence of chloride ions in the final perovskite film is still under debate. Contrastingly, few studies reported a negligible amount or absence of chloride ions in the final film, while others reported detection of chloride ions in the final film. Herein, we observed the microstructure and chlorine content of MAPbI3-xClx thin films with increasing temperature via an in-situ nano-Auger spectroscopy and in-situ scanning electron microscopic analysis. The relative precipitation of MAPbI3-xClx films occur at lower temperature and MAPbI3-xClx grains grow faster than those of MAPbI3 grains. Local concentrations of chlorine at intragrain and the vicinity of grain boundary were analyzed to understand the behavior and role of the chloride ions during the microstructural evolution of the MAPbI3-xClx films.

Anatomical and Chemical Characterization of Ulmus Species from South Korea.

Ulmus species (Ulmaceae) are large deciduous trees distributed throughout Korea. Although their root and stem bark have been used to treat gastrointestinal diseases and wounds in folk medicine, commercial products are consumed without any standardization. Therefore, we examined anatomical and chemical differences among five Ulmus species in South Korea. Transverse sections of leaf, stem, and root barks were examined under a microscope to elucidate anatomical differences. Stem and root bark exhibited characteristic medullary ray and secretary canal size. Leaf surface, petiole, and midrib exhibited characteristic inner morphologies including stomatal size, parenchyma, and epidermal cell diameter, as well as ratio of vascular bundle thickness to diameter among the samples. Orthogonal projections to latent structures discriminant analysis of anatomical data efficiently differentiated the five species. To evaluate chemical differences among the five species, we quantified (-)-catechin, (-)-catechin-7-O-ß-D-apiofuranoside, (-)-catechin-7-O-α-L-rhamnopyranoside, (-)-catechin-7-O-ß-D-xylopyranoside, (-)-catechin-7-O-ß-D-glucopyranoside, and (-)-catechin-5-O-ß-D-apiofuranoside using high-performance liquid chromatography with a diode-array detector. (-)-Catechin-7-O-ß-D-apiofuranoside content was the highest among all compounds in all species, and (-)-catechin-7-O-α-L-rhamnopyranoside content was characteristically the highest in Ulmus parvifolia among the five species. Overall, the Ulmus species tested was able to be clearly distinguished on the basis of anatomy and chemical composition, which may be used as scientific criteria for appropriate identification and standard establishment for commercialization of these species.

Photoelectrochemical Water Splitting Reaction System Based on Metal-Organic Halide Perovskites.

In the development of hydrogen-based technology, a key challenge is the sustainable production of hydrogen in terms of energy consumption and environmental aspects. However, existing methods mainly rely on fossil fuels due to their cost efficiency, and as such, it is difficult to be completely independent of carbon-based technology. Electrochemical hydrogen production is essential, since it has shown the successful generation of hydrogen gas of high purity. Similarly, the photoelectrochemical (PEC) method is also appealing, as this method exhibits highly active and stable water splitting with the help of solar energy. In this article, we review recent developments in PEC water splitting, particularly those using metal-organic halide perovskite materials. We discuss the exceptional optical and electrical characteristics which often dictate PEC performance. We further extend our discussion to the material limit of perovskite under a hydrogen production environment, i.e., that PEC reactions often degrade the contact between the electrode and the electrolyte. Finally, we introduce recent improvements in the stability of a perovskite-based PEC device.

Effect of Adventitious Carbon on Pit Formation of Monolayer MoS2.

Forming pits on molybdenum disulfide (MoS2 ) monolayers is desirable for (opto)electrical, catalytic, and biological applications. Thermal oxidation is a potentially scalable method to generate pits on monolayer MoS2 , and pits are assumed to preferentially form around undercoordinated sites, such as sulfur vacancies. However, studies on thermal oxidation of MoS2 monolayers have not considered the effect of adventitious carbon (C) that is ubiquitous and interacts with oxygen at elevated temperatures. Herein, the effect of adventitious C on the pit formation on MoS2 monolayers during thermal oxidation is studied. The in situ environmental transmission electron microscopy measurements herein show that pit formation is preferentially initiated at the interface between adventitious C nanoparticles and MoS2 , rather than only sulfur vacancies. Density functional theory (DFT) calculations reveal that the C/MoS2 interface favors the sequential adsorption of oxygen atoms with facile kinetics. These results illustrate the important role of adventitious C on pit formation on monolayer MoS2 .

Tunable Dielectric and Thermal Properties of Oxide Dielectrics via Substrate Biasing in Plasma-Enhanced Atomic Layer Deposition.

The ability to control the properties of dielectric thin films on demand is of fundamental interest in nanoscale devices. Here, we modulate plasma characteristics at the surface of a substrate to tune both dielectric constant and thermal conductivity of amorphous thin films grown using plasma-enhanced atomic layer deposition. Specifically, we apply a substrate bias ranging from 0 to ∼117 V and demonstrate the systematic tunability of various material parameters of Al2O3. As a function of the substrate bias, we find a nonmonotonical evolution of intrinsic properties, including density, dielectric constant, and thermal conductivity. A key observation is that the maximum values in dielectric constant and effective thermal conductivity emerge at different substrate biases. The impact of density on both thermal conductivity and dielectric constant is further examined using a differential effective medium theory and the Clausius-Mossotti model, respectively. We find that the peak value in the dielectric constant deviates from the Clausius-Mossotti model, indicating the change of oxygen fraction in our thin films as a function of substrate bias. This finding suggests that the increased local strength of plasma sheath not only enhances material density but also controls the dynamics of microstructural defect formation beyond what is possible with conventional approaches. Based on our experimental observations and modeling, we further build a phenomenological relation between dielectric constant and thermal conductivity. Our results pave invaluable avenues for optimizing dielectric thin films at the atomic scale for a wide range of applications in nanoelectronics and energy devices.

Low Dimensional Carbon-Based Catalysts for Efficient Photocatalytic and Photo/Electrochemical Water Splitting Reactions.

A universal increase in energy consumption and the dependency on fossil fuels have resulted in increasing severity of global warming, thus necessitating the search of new and environment-friendly energy sources. Hydrogen is as one of the energy sources that can resolve the abovementioned problems. Water splitting promotes ecofriendly hydrogen production without the formation of any greenhouse gas. The most common process for hydrogen production is electrolysis, wherein water molecules are separated into hydrogen and oxygen through electrochemical reactions. Solar-energy-induced chemical reactions, including photocatalysis and photoelectrochemistry, have gained considerable attention because of the simplicity of their procedures and use of solar radiation as the energy source. To improve performance of water splitting reactions, the use of catalysts has been widely investigated. For example, the novel-metal catalysts possessing extremely high catalytic properties for various reactions have been considered. However, due to the rarity and high costs of the novel-metal materials, the catalysts were considered unsuitable for universal use. Although other transition-metal-based materials have also been investigated, carbon-based materials, which are obtained from one of the most common elements on Earth, have potential as low-cost, nontoxic, high-performance catalysts for both photo and electrochemical reactions. Because abundancy, simplicity of synthesis routes, and excellent performance are the important factors for catalysts, easy optimization and many variations are possible in carbon-materials, making them more attractive. In particular, low-dimensional carbon materials, such as graphene and graphitic carbon nitride, exhibit excellent performance because of their unique electrical, mechanical, and catalytic properties. In this mini-review, we will discuss the performance of low-dimensional carbon-based materials for water splitting reactions.

Irreducible fracture-dislocation of the ankle caused by an entrapped medial malleolus at the syndesmosis.

A 55-year-old fisherman sustained an unusual and irreducible fracture-dislocation of the ankle joint. An entrapped medial malleolar fragment was discovered by computed tomography between the distal tibia and lateral malleolus. The fragment was removed during an emergent open reduction, during which deltoid ligament repair and internal fixation of the bimalleolar fracture were undertaken. At the 18-month follow-up visit, the patient was working normally and was asymptomatic. At previous visits, he demonstrated a full range of ankle motion and had normal radiograph.

Anti-Hermitian photodetector facilitating efficient subwavelength photon sorting.

The ability to split an incident light beam into separate wavelength bands is central to a diverse set of optical applications, including imaging, biosensing, communication, photocatalysis, and photovoltaics. Entirely new opportunities are currently emerging with the recently demonstrated possibility to spectrally split light at a subwavelength scale with optical antennas. Unfortunately, such small structures offer limited spectral control and are hard to exploit in optoelectronic devices. Here, we overcome both challenges and demonstrate how within a single-layer metafilm one can laterally sort photons of different wavelengths below the free-space diffraction limit and extract a useful photocurrent. This chipscale demonstration of anti-Hermitian coupling between resonant photodetector elements also facilitates near-unity photon-sorting efficiencies, near-unity absorption, and a narrow spectral response (∼ 30 nm) for the different wavelength channels. This work opens up entirely new design paradigms for image sensors and energy harvesting systems in which the active elements both sort and detect photons.

Impact of thermally dead volume on phonon conduction along silicon nanoladders.

Thermal conduction in complex periodic nanostructures remains a key area of open questions and research, and a particularly provocative and challenging detail is the impact of nanoscale material volumes that do not lie along the optimal line of sight for conduction. Here, we experimentally study thermal transport in silicon nanoladders, which feature two orthogonal heat conduction paths: unobstructed line-of-sight channels in the axial direction and interconnecting bridges between them. The nanoladders feature an array of rectangular holes in a 10 µm long straight beam with a 970 nm wide and 75 nm thick cross-section. We vary the pitch of these holes from 200 nm to 1100 nm to modulate the contribution of bridges to the net transport of heat in the axial direction. The effective thermal conductivity, corresponding to reduced heat flux, decreases from ∼45 W m-1 K-1 to ∼31 W m-1 K-1 with decreasing pitch. By solving the Boltzmann transport equation using phonon mean free paths taken from ab initio calculations, we model thermal transport in the nanoladders, and experimental results show excellent agreement with the predictions to within ∼11%. A combination of experiments and calculations shows that with decreasing pitch, thermal transport in nanoladders approaches the counterpart in a straight beam equivalent to the line-of-sight channels, indicating that the bridges constitute a thermally dead volume. This study suggests that ballistic effects are dictated by the line-of-sight channels, providing key insights into thermal conduction in nanostructured metamaterials.