Two-Piece Hollow Bulb Obturator for Postsurgical Partial Maxillectomy Defect in a Young Patient Revamping Lost Malar Prominence: A Clinical Report.

The most frequent type of treatment for patients diagnosed with a malignant neoplasia of the oral cavity is surgical resection of the tumor. Ablative surgery may be followed by a reconstructive phase, in which the surgeon may choose between local flaps, nonvascularized bone grafts or free vascularized flaps to close the surgical site, depending on the general conditions of the patient. Esthetic and functional results are challenging to achieve for the prosthodontist, as variable amount of hard and soft tissues are removed. This report describes the fabrication of a two-piece hollow obturator for a 19-year-old patient who underwent wide surgical excision of the osteosarcoma of the maxilla and was rehabilitated to function. In this case, the surgical site was covered with submental flap, and the second piece of the obturator provided fullness to the lost malar prominence.

Reliability of different facial measurements for determination of vertical dimension of occlusion in edentulous using accepted facial dimensions recorded from dentulous subjects.

The study was undertaken to evaluate the reliability of different facial measurements for determination of vertical dimension of occlusion in edentulous subjects using accepted facial dimensions recorded from dentulous subjects. The hypothesis was that facial measurements can be used to obtain the vertical dimension of occlusion for edentulous patients where no pre-extraction records exist. A total of 180 subjects were selected in the age groups of 50-60 years, consisting of 75 dentate male and 75 dentate female subjects for whom different facial measurements were recorded including vertical dimension of occlusion and rest, and 15 edentulous male and 15 edentulous female subjects for whom all the facial measurements were recorded including the vertical dimension of rest and occlusion following construction of upper and lower complete dentures. The left outer canthus of eye to angle of mouth distance and the right Ear-Eye distance were found to be as valuable adjuncts in the determination of occlusal vertical dimension. The Glabella-Subnasion distance, the Pupil-Stomion distance, the Pupil-Rima Oris distance and the distance between the two Angles of the Mouth did not have a significant role in the determination of the occlusal vertical dimension. The vertical dimension can be determined with reasonable accuracy by utilizing other facial measurements for patients for whom no pre-extraction records exist.

To evaluate the effect of various surface treatments on the shear bond strength of three different intraoral ceramic repair systems: an in vitro study.

Fractures of metal-ceramic restoration pose an esthetic and functional dilemma both for patient and the dentist. Intraoral repair systems eliminate the remake and removal of restoration. Many intraoral repair materials and surface treatments are available to repair intraorally fractured metal-ceramic restoration. Bond strength data of various materials and specific technique used for repair are necessary for predicting the success of a given repair system. This study evaluated the shear bond strength of three different intraoral repair systems for metal-ceramic restorations applied on exposed metal and porcelain surface. One hundred and twenty metal discs (20 mm in diameter × 0.7 mm thick) were fabricated with nickel-chromium alloy (Mealloy, Dentsply, USA). Feldspathic porcelain (Duceram, Degudent, Germany) were applied over one test surface of the discs in the thickness of 1.8 mm followed by conventional firing. The defect, which simulates clinical failures were created in 1/4th area of the metal-ceramic discs. The metal-ceramic discs samples were divided into ceramic substrate (Group I, n = 60) and metal substrate (Group II, n = 60), according to the defect location. Then, samples of ceramic substrate (Group I) and metal substrate (Group II) were subdivided into A, B according to the surface treatments (A; roughening with diamond bur and B; abraded with 50 µ Al2O3) and repaired with one of the intraoral repair systems tested (a. Ceramic repair system, Ivoclar Vivadent; b. Clearfil repair system, Kurary, c; Porcelain repair system, 3 M ESPE). All the repaired samples were stored in distilled water at 37 °C for 24 h. After thermocycling at 6-60° C, all the samples were stored at 37 °C for additional 7 days. Shear bond strength of all the samples were calculated by using Universal testing machine. The mean shear bond strength values for the group I (A/B) were as follows: Ceramic repair system (9.47 ± 1.41/14.03 ± 2.54 MPa), Clearfil repair system (14.03 ± 2.32/14.64 ± 2.28 MPa), and Porcelain repair system (14.41 ± 3.96/14.86 ± 3.10 MPa). The mean shear bond strength values for the group II (A/B) were as follows: Ceramic repair system (9.42 ± 1.44/18.61 ± 2.60 MPa), Clearfil repair system (14.44 ± 3.23/14.98 ± 2.73 MPa), and Porcelain repair system (11.86 ± 2.24/13.24 ± 2.72 MPa). Air abrasion with 50 µm aluminum oxide particles is the preferred surface treatment. Porcelain repair system showed the highest shear bond with air abrasion for ceramic substrate and for metal substrate Ceramic repair system showed the highest bond strength with air abrasion as a surface treatment. This study suggest that the three repair systems tested are adequate for intraoral chairside repair of metal-ceramic restoration when air abrasion is used for surface treatment of the substrate (Ceramic repair system, Ivoclar Vivadent, Germany; Clearfil repair system, Kurary, Japan; Porcelain repair system, 3M ESPE, Germany).

Reliability of anatomic reference planes in establishing the occlusal plane in different jaw relationships: a cephalometric study.

The purpose of this study was to evaluate the reliability of different anatomic reference planes in determination of Occlusal plane in dentulous and edentulous subjects with Angle's class I and class II Maxillomandibular relationship. Eighty subjects were included in the study which was divided into four Groups based on dentition and skeletal relationship. The Group I (n = 20) and Group II (n = 20) includes young and completely dentulous subjects in Angle's class I and class II relationship, respectively. The Group III (n = 20) and Group IV (n = 20) subjects were completely edentulous in Angle's class I and class II relationship, respectively. For all subjects, right lateral cephalograms were taken and cephalometric analysis was done and data obtained from cephalometric tracings were then statistically analyzed. The results showed no significant difference of angle between Occlusal plane and Frankfort Horizontal plane, Camper's plane and Palatal plane when Group I and Group III, and Group II and Group IV subjects were compared. The Frankfort Horizontal plane, Camper's plane and the Palatal plane may be used as a reliable guide to establish Occlusal plane in edentulous subjects in both Angle's class I and class II Maxillomandibular relationships.

A two-piece sectional interim obturator. A clinical report.

Prosthetic rehabilitation of acquired maxillary defects can be achieved satisfactorily if all facets of treatment planning and design considerations are taken into account before the rehabilitation process. Complications associated with maxillary defects limit treatment protocols to a great extent. The prosthodontist has to identify these problem areas and suitably devise feasible options and incorporate them in the design. In this report, an acquired maxillary defect with unfavorable undercuts in the defect was successfully treated by making a two-piece sectional obturator. The two pieces were connected by the use of double-die pin system. The methodology greatly reduced chairside time and number of visits, and effective obturation was satisfactorily achieved.

A comparative evaluation of static and functional methods for recording centric relation and condylar guidance: a clinical study.

To evaluate and compare the centric relation and horizontal condylar guidance using interocclusal wax and extra oral Gothic arch methods and subjective evaluation of dentures thus fabricated. Centric relation and horizontal condylar guidance was recorded by using interocclusal wax and gothic arch tracing in 28 completely edentulous patients. These records were transferred to the articulator and difference in both values was recorded. After that patients were divided in two groups according to the centric relation and horizontal condylar guidance recording method used to achieve balanced occlusion. Response of the dentures was subjectively evaluated using "Woelfel subjective evaluation criteria". Centric relation recorded by both the methods did coincide in 7.14 % of patients. Centric relation recorded by interocclusal wax was posterior to Gothic centric relation in 21.43 % of patients, and anterior to Gothic centric relation in 71.42 % patients. Gothic arch tracings gave higher mean guidance values on both the sides as compared to protrusive wax record in all the subjects, although the difference was statistically insignificant (P > 0.05). Subjective evaluation showed statistical insignificance for all the parameters in both groups. Gothic arch method records the centric relation at a more posterior position than the Static method, but it does not make any difference in clinical performance of the complete denture. Horizontal condylar guidance angle was approximately similar by both the methods.

Comprehensive review of guidelines to practice prosthodontic and implant procedures during COVID-19 pandemic.

OBJECTIVES: To present a comprehensive review of current literature available on Corona virus disease and dentistry, modifications required in dental and laboratory settings; and recommended disinfection protocols in current scenario. Special emphasis has been given to discuss guidelines for handling different prosthodontic procedures and implications of this pandemic on prosthodontic practice, education and research. MATERIALS AND METHODS: Relevant literature pertaining to COVID-19 and dentistry was scrutinized on electronic search engines including PubMed, EMBASE and Cochrane. Guidelines given by various organizations, institutions, national and international regulatory bodies and Indian Prosthodontic Society were also consulted to gather information pertaining to the objectives of our review. RESULTS: and observations: A total of 160 articles including cross-sectional studies, in vitro study, narrative reviews, letters to the editor and opinions were found to be relevant in accordance with our search strategy. Documented literature revealed that Covid-19 pandemic has culminated in serious clinical, financial and psychological implications in the field of dentistry. Certain steps such as adoption of teledentistry, judicious use of protective equipment, use of rubber dams, pre-procedural rinses have been suggested unanimously. However, there is a dearth of evidence-based recommendations in literature. Data regarding consequences of delaying prosthodontic procedures and patients' perspectives is also sparse. CONCLUSION: The COVID-19 necessitates the need to adopt a balanced approach while treating patients and safeguarding the dental professionals at the same time. Risk-benefit ratio has to be assessed along with stringent following of guidelines and disinfection protocols to combat this unprecedented situation.

An in vitro comparative evaluation between virtually planned implant positions on interactive implant software versus actual implant positions achieved using sterolithographic open guide system.

PURPOSE: To evaluate and compare the positional and angular accuracy of virtual implant positions planned on cone-beam computed tomography and final implant positions achieved using a universal open guide system. MATERIALS AND METHODS: A dual scan of a partially edentulous jaw model along with prosthesis was done, and virtual implant planning was performed. Three implant positions in relation to 35, 36, and 37 were simulated (Group A). In total, 24 implants were placed in eight replaceable bone blocks (Group B) in the same region on the model using an open stereolithographic template. The linear positions and angulation of the placed implants were determined using Vision Measuring Machine. Deviations between virtually planned and surgically placed implants were analyzed in terms of linear and angular measurements. Data were analyzed with the independent-sample t-test with differences P ≤ 0.05 being considered statistically significant. RESULTS: The linear distance (mean ± standard deviation [SD]) in mesiodistal direction between implants in relation to 35 and 36, 36 and 37, 35 and 37 in Group A was 8.79 ± 0 mm, 8.71 ± 0 mm, and 17.50 ± 0 mm, respectively, and in Group B was 7.70 ± 0.58 mm, 8.11 ± 0.30 mm, and 15.80 ± 0.48 mm. All these above values were found to be statistically significant (P ≤ 0.05). The linear distance (mean ± SD) in the vertical direction (mesial) for implants placed in the region of 35, 36, 37 for Group A was 1.51 ± 0 mm, 1.51 ± 0 mm, and 2.47 ± 0 mm, respectively, and for Group B was 1.37 ± 0.32 mm, 1.65 ± 0.48 mm, and 1.79 ± 0.36 mm, respectively. The linear distance (mean ± SD) in the vertical direction (distal) for implants placed in the region of 35, 36, 37 for Group A was 3.37 ± 0 mm, 1.51 ± 0 mm, and 1.51 ± 0 mm, respectively, and for Group B was 1.86 ± 0.48 mm (P ≤ 0.05), 1.56 ± 0.23 mm, and 1.29 ± 0.39 mm (P ≤ 0.05), respectively. The angular deviation (perpendicularity) values for virtually planned implants (Group A) were 90.00° ± 0° and for implants placed in the region of 35, 36, and 37 (Group B) were 84.52° ± 5.4°, 83.57° ± 1.52°, and 80.41° ± 2.37°, respectively, which are highly significant (P ≤ 0.05). CONCLUSIONS: The stereolithographic universal open guide used in the study may be considered accurate for placement of implants in mesiodistal position and also in terms of perpendicularity but not in the vertical position. Stereolithographic open guide may be recommended for more accurate implant position, especially for the placement of multiple implants.

Skeletal and dentoalveolar effects of Twin-block and bionator appliances in the treatment of Class II malocclusion: a comparative study.

INTRODUCTION: The purpose of this study was to evaluate the skeletal and dentoalveolar effects of the Twin-block and bionator appliances in the treatment of Class II Division 1 malocclusions. METHODS: Fifty-five girls from North India with Class II Division 1 malocclusion and the same physical growth maturation status were selected for the study. The subjects were divided among a Twin-block group (n = 25), a bionator group (n = 20), and a control group (n = 10). Pretreatment and posttreatment lateral cephalometric radiographs of the treatment group subjects, and prefollow-up and postfollow-up radiographs of the control group subjects, were traced manually and subjected to the pitchfork analysis. RESULTS: Statistical software was used for 1-way analysis of variance and multiple comparisons (post-hoc test, Bonferroni). A P value of .05 was considered statistically significant. Neither the Twin-block nor the bionator appliance significantly restricted forward growth of the maxilla (P = .476). Mandibular growth in the Twin-block subjects was significantly greater than in controls (P = .005). Mandibular growth was comparable in the control and the bionator subjects. Molar correction, overjet reduction, and proclination of the mandibular incisors were significantly greater (P = .000) in the treated subjects compared with the controls. CONCLUSIONS: Both the Twin-block and bionator appliances were effective in correcting molar relationships and reducing overjets in Class II Division 1 malocclusion subjects. However, the Twin-block was more efficient than the bionator in the treatment of Class II Division 1 malocclusion.

A finite element study of teeth restored with post and core: Effect of design, material, and ferrule.

BACKGROUND: Different postdesigns and materials are available; however, no consensus exists regarding superiority for stress distribution. The aim of this study was to evaluate the effect of design and material of post with or without ferrule on stress distribution using finite element analysis. MATERIALS AND METHODS: A total of 12 three-dimensional (3D) axisymmetric models of postretained central incisors were made: Six with ferrule design and six without it. Three of these six models had tapered posts, and three had parallel posts. The materials tested were titanium post with a composite resin core, nickel chromium cast post and core, and fiber reinforced composite (FRC) post with a composite resin core. The stress analysis was done using ANSYS software. The load of 100 N at an angle of 45΀ was applied 2 mm cervical to incisal edge on the palatal surface and results were analyzed using 3D von Mises criteria. RESULTS: The highest amount of stress was in the cervical region. Overall, the stress in the tapered postsystem was more than the parallel one. FRC post and composite resin core recorded minimal stresses within the post but the stresses transmitted to cervical dentin were more as compared to other systems. Minimal stresses in cervical dentine were observed where the remaining coronal dentin was strengthen by ferrule. CONCLUSION: A rigid material with high modulus of elasticity for post and core system creates most uniform stress distribution pattern. Ferrule provides uniform distribution of stresses and decreases the cervical stresses.

Adenomatoid odontogenic tumour: review and case report.

Adenomatoid odontogenic tumour is a benign (hamartomatous), noninvasive lesion with slow but progressive growth. The 3 variants--follicular, extrafollicular and peripheral--present with identical histological findings. This report describes a patient with a large adenomatoid odontogenic tumour in the mandible, with the involved mandibular canine being pushed to the contralateral side. The paper also provides a refresher for general dental practitioners about various diagnostic aspects of this tumour and highlights the controversies regarding its origin and management in light of recent findings.

Managing morphologically atypical impacted teeth orthodontically.

Impactions with severely dilacerated root is seldom reported, especially the maxillary incisor. It is probably because of the high clinical difficulty of bringing the dilacerated tooth into position: most patients probably would choose extraction with replacement by prosthesis instead. However, the philosophy seems to have changed recently. We report two cases one in which an impacted central incisor was brought in the arch by orthodontic traction. In the second case the impacted premolar was brought into the arch and was shaped as a mandibular canine for achieving a good functional occlusion.

Orthopedic and orthodontic effects of Twin-block appliance.

This prospective study was conducted on 24 North Indian subjects (10 Control and 14 Twin-block) to evaluate the skeletal and dentoalveolar effects of Twin-block appliance in the treatment of Class II division 1 malocclusion. The result of the present study showed that Twin-block is an effective appliance in accelerating mandibular growth. It also helped dramatically in molar correction and overjet reduction in Class II division 1 malocclusion subjects.

Dentofacial characteristics in Apert syndrome: a case report.

Apert's syndrome is a developmental malformation characterized by craniosynostosis, a cone shaped calvarium, midface hypoplasia, pharyngeal attenuation, ocular manifestations and syndactyly of the hands and feet. The prodromal characteristic for the typical craniofacial appearance is early craniosynostosis of the coronal suture, cranial base and an agenesis of the sagittal suture. These craniofacial characteristics predispose the patient to maxillary transverse and sagittal hypoplasia with concomitant dental crowding, a pseudo cleft palate and a skeletal and dental anterior open bite. A case of Apert syndrome is presented with special emphasis on craniofacial characteristics and multidisciplinary approach to treatment. The differences between Apert and Crouzon's syndrome are highlighted.

Secondary bone grafting in cleft lip and palate with eruption of tooth into the graft: a case report.

Secondary bone grafting in cleft lip and palate patients is performed preferably before the eruption of permanent canine in order to provide adequate periodontal support for eruption and preservation of the teeth adjacent to the cleft. Presented here with is a case of unilateral cleft lip and palate, which was followed up from birth to 15 years of age. The role of an orthodontist in the team approach for management of such anomalies is described. Also discussed in detail is the entire range of treatment procedures the child underwent, especially the role of secondary bone grafting.

Genetics of cleft lip and palate revisited.

Cleft lip with or without cleft palate (CL/CP) is one of the most common structural birth defects with treatment including multiple surgeries speech therapy, and dental and orthodontic treatments over the first 18 years of life. Providing care for these patients and families includes educating patients and parents about the genetics of CL/CP, as well as meeting the immediate medical needs. Attempts at identifying susceptibility loci via family and case-control studies have proved inconsistent. It is likely that initial predictions of the complex interactions involved in facial development were underestimated. The candidate gene list for CL/P is getting longer and the need for an impartial systematic screening technique, to implicate or refute the inclusion of particular loci, is apparent. So we are faced with the question "Can this complex trait be too complex?" The aim of this review is to make the dentist aware of the differences between syndromic and non-syndromic cleft as well as understanding the etiological variation in cleft lip with and without cleft palate. This will aid the dentist in diagnosis and give proper genetic counseling to parents and patients of cleft lip and palate.

Bilateral dentigerous cyst associated with polymorphism in chromosome 1qh+.

Non-syndromal bilateral dentigerous cysts are rare. It is conceivable that they are either under-recognized or under-reported. In this article we report the unusual occurrence of non-syndromic bilateral dentigerous cysts associated with mandibular third molars with polymorphism in chromosome 1qh+. It is suggested that in non syndromal cases of bilateral dentigerous cysts karyotyping should be done to confirm the association with chromosomal 1 anomaly.

Orthodontic assisted tooth eruption in a dentigerous cyst: a case report.

In an orthodontic practice, it is common to deal with impacted teeth, which are one of the most difficult situations dealt with by dentists. This case report describes the surgical and orthodontic management of the impacted teeth in a large dentigerous cyst. In the initial stage of treatment, the cyst was marsupialized over 7 months. After decompression of the cyst, spontaneous eruptions of the impacted tooth were noticed. Then, they were orthodontically brought into the proper occlusion.

Orthodontic treatment of impacted anterior teeth due to odontomas: a report of two cases.

Two cases are presented where the odontomas had caused the impaction of the anterior teeth and required a combined surgical and orthodontic treatment to bring these teeth into the arch. In the first case a large a complex odontome had caused the impaction of the right central incisor, lateral incisor and canine. In the second case a compound odontome blocked the eruption pathway of the right central incisor. It is emphasised that radiographic examination of all pediatric patients that present clinical evidence of delayed permanent tooth eruption or temporary tooth displacement with or without a history of previous dental trauma should be performed. Early diagnosis of odontomas allows adoption of a less complex and less expensive treatment and ensures a better prognosis.