RESUMO
BACKGROUND: Acromial and scapular spine fractures (ASFs) are known complications following implantation of reverse total shoulder arthroplasty (RTSA). The entity of acromial stress reaction (ASR) without fracture has recently been described. The purpose of this study was to analyze the incidence, radiographic predictors, treatment options, healing rates, and clinical outcomes of ASF and ASR compared with a control group. METHODS: A total of 854 primary RTSAs were implanted between 2005 and 2018 in a single shoulder unit of a tertiary referral hospital and retrospectively reviewed for the incidence of ASF and ASR. ASR was defined as pain at the acromion or scapular spine after fracture exclusion on computed tomography scans. The ASF group was matched to a control group. Preoperative and postoperative radiographs were analyzed for radiographic predictors of ASF or ASR. The impact of ASF and ASR, operative vs. nonoperative treatment, and fracture union on clinical outcomes (Constant-Murley score [CS], Subjective Shoulder Value [SSV], and range of motion) with a minimum follow-up period of 2 years was analyzed. RESULTS: A total of 46 ASFs (5.4%) in 44 patients and 44 ASRs (5.2%) in 43 patients were detected at a mean of 16 ± 24 months and 20 ± 23 months postoperatively, respectively. Predictive radiographic factors were an increased critical shoulder angle and lateralization shoulder angle. The overall union rate was 55% (22 of 40) but was significantly higher following operative treatment (9 of 11, 82%) compared with nonoperative treatment (13 of 29, 45%). Patients with ASF or ASR demonstrated inferior clinical outcomes (CS, 44 ± 21 and 48 ± 18; SSV, 52% ± 25% and 57% ± 27%) compared with the control group (CS, 66 ± 14; SSV, 82% ± 22%) independent of bony union or treatment at a mean of 59 ± 33 months (ASF) and 61 ± 38 months (ASR). CONCLUSION: ASF and ASR are frequent complications following RTSA implantation with similar poor clinical outcome measures. The healing rate was shown to be much higher with a surgical approach. Nevertheless, fracture consolidation does not result in better clinical outcomes compared with nonunion.
Assuntos
Artroplastia do Ombro , Fraturas Ósseas , Articulação do Ombro , Acrômio/diagnóstico por imagem , Acrômio/cirurgia , Artroplastia do Ombro/efeitos adversos , Artroplastia do Ombro/métodos , Fraturas Ósseas/cirurgia , Humanos , Incidência , Amplitude de Movimento Articular , Estudos Retrospectivos , Articulação do Ombro/diagnóstico por imagem , Articulação do Ombro/cirurgia , Resultado do TratamentoRESUMO
Background: Treatment of displaced distal clavicle fractures with bony avulsion of the coracoclavicular (CC) ligaments often warrants surgical fixation, yet a gold standard surgical technique is to be defined. The purpose of this study was to compare the biomechanical fixation strength of a new fixation technique, the CC stand-alone cow-hitch suture reconstruction, and to compare this technique with a clavicle hook plate and a lateral locking plate with CC suture reconstruction. Methods: Simulated Neer type V distal clavicle fractures of the clavicle were created in 18 cadaveric shoulders, which were matched by age and gender in 3 groups: (1) clavicle hook plate (group HP), (2) lateral locking plate fixation with CC suture reconstruction (group LPCC), and (3) CC stand-alone suture reconstruction using the cow-hitch technique (group CH). After preconditioning with 25 N for 10 cycles, the specimens were cycled in the coronal plane for 500 cycles from 10N to 70N. Displacement and ultimate load to failure were documented and analyzed with the data acquisition system. Results: There was a significant difference in the fracture displacement during cyclic loading between the LPCC group and the HP group (0.6 vs. 1.7 mm; P = .02) and between the CH and HP groups (0.5 vs. 1.7 mm; P = .004). Fracture displacement was not different between the LPCC and the CH groups (P = .544). The CH group and the LPCC group showed a significantly higher stiffness compared to the HP group (P < .001 and P = .003, respectively). The CH group showed a significantly higher ultimate load to failure compared with the HP group (429 vs. 172 N; P = .005) and showed a tendency toward higher ultimate load to failure when compared with the LPCC group (429 vs. 258 N; P = .071). Conclusion: The CC stand-alone cow-hitch suture reconstruction and the locking plate with CC reconstruction showed higher fixation strength compared with the hook plate for simulated Neer type V distal clavicle fractures. There was a tendency of higher ultimate load to failure with the cow-hitch technique compared with the lateral locking plate with CC suture reconstruction, and given the potential advantages of less soft tissue stripping, metal-free fixation, low costs, and simple surgical technique, clinical application of the all-suture CC reconstruction using the cow-hitch for Neer type V distal clavicle fractures appears warranted.
RESUMO
BACKGROUND: With the increase in utility and popularity of the reverse total shoulder arthroplasty (RTSA) within the last decades, indications for RTSA have expanded. As well as the established indications such as cuff tear arthropathy and massive irreparable rotator cuff tears, RTSA for complex proximal humeral fractures in elderly patients has been proven to be a reliable treatment option. METHODS: A prospectively enrolled RTSA database of 1457 RTSAs implanted between September 2005 and November 2020 was reviewed. Patients treated with RTSA for a complex proximal humerus fracture and fracture sequalae (F-RTSA) were 1:1 matched with a group of patients who were treated electively with RTSA for indications other than a fracture (E-RTSA). Matching criteria included sex, age, length of follow-up and body mass index. Evaluation after a minimum of 2 years follow-up included evaluation of the absolute and relative Constant-Murley score (aCS; rCS), subjective shoulder value (SSV), range of motion (ROM) assessment and complications. RESULTS: Each of the matched cohorts comprised 134 patients with a mean follow-up of 58 ± 41 months for the fracture group and 58 ± 36 months for the elective group. The mean age for both groups was 69 ± 11 years in the F-RTSA and 70 ± 9 years for the E-RTSA group. There were no significant differences in clinical outcome measures including aCS, rCS and SSV (p > 0.05). There was a significant difference in mean active external rotation with 20° ± 18° in the F-RTSA group compared with 25° ± 19° in the E-RTSA group (p = 0.017). The complication rate was not significantly different, with 41 complications in 36 shoulders in the F-RTSA and 40 complications in 32 shoulders in the E-RTSA group (p = 0.73). The main complication for the F-RTSA group was dislocation of the greater tuberosity (6%), whereas acromial fractures (9%) were the leading complication in the E-RTSA group. There was also no significant difference in revision rate comparing F-RTSA with E-RTSA (10% vs. 14%; p = 0.25). CONCLUSIONS: RTSA for complex proximal humeral fractures and its sequalae leads to a comparable clinical outcome as that for patients treated electively with RTSA for indications other than fracture. There was, however, a significant difference in active external rotation, with inferior rotation in patients undergoing RTSA for fracture. This valuable information can help in requesting informed consent of patients with proximal humeral fractures.
RESUMO
Fractures of the acromion and the scapular spine are established complications of reverse shoulder arthroplasty (RSA), and when they occur, the continuous strain by the deltoid along the bony fragments makes healing difficult. Evidence on treatment specific outcomes is poor, making the definition of a gold standard fixation technique difficult. The purpose of this systematic review is to assess whether any particular fixation construct offers improved clinical and/or radiographic outcomes. A systematic review of the literature on fixation of acromial and scapular spine fractures following RSA was carried out based on the guidelines of PRISMA. The search was conducted on PubMed, Embase, OVID Medline, and CENTRAL databases with strict inclusion and exclusion criteria applied. Methodological quality assessment of each included study was done using the modified Coleman methodology score to asses MQOE. Selection of the studies, data extraction and methodological quality assessment was carried out by two of the authors independently. Only clinical studies reporting on fixation of the aforementioned fractures were considered. Fixation construct, fracture union and time to union, shoulder function and complications were investigated. Nine studies reported on fixation strategies for acromial and scapular spine fractures and were therefore included. The 18 reported results related to fractures in 17 patients; 1 was classified as a Levy Type I fracture, 10 as a Levy Type II fracture and the remaining 7 fractures were defined as Levy Type III. The most frequent fixation construct in type II scapular spine fractures was a single plate (used in 6 of the 10 cases), whereas dual platin was the most used fixation for Levy Type III fractures (5 out of 7). Radiographic union was reported in 15 out of 18 fractures, whereas 1 patient (6.7%) had a confirmed non-union of a Levy Type III scapular spine fracture, requiring revision fixation. There were 5 complications reported, with 2 patients undergoing removal of metal and 1 patient undergoing revision fixation. The Subjective Shoulder Value and Visual Analogue Scale pain score averaged 75% and 2.6 points, respectively. The absolute Constant Score and the ASES score averaged 48.2 and 78.3 points, respectively. With the available data, it is not possible to define a gold standard surgical fixation but it seems that even when fracture union can be achieved, functional outcomes are moderate and there is an increased complication rate. Future studies are required to establish a gold standard fixation technique.
RESUMO
BACKGROUND: Acromial and scapular spine fractures after reverse total shoulder arthroplasty (RTSA) can be devastating complications leading to substantial functional impairments. The purpose of this study was to review factors associated with increased acromial and scapular spine strain after RTSA from a biomechanical standpoint. METHODS: A systematic review of the literature was conducted based on PRISMA guidelines. PubMed, Embase, OVID Medline, and CENTRAL databases were searched and strict inclusion and exclusion criteria were applied. Each article was assessed using the modified Downs and Black checklist to appraise the quality of included studies. Study selection, extraction of data, and assessment of methodological quality were carried out independently by two of the authors. Only biomechanical studies were considered. RESULTS: Six biomechanical studies evaluated factors associated with increased acromial and scapular spine strain and stress. Significant increases in acromial and scapular spine strain were found with increasing lateralization of the glenosphere in four of the included studies. In two studies, glenosphere inferiorization consistently reduced acromial strain. The results concerning humeral lateralization were variable between four studies. Humeral component neck-shaft angle had no significant effect on acromial strain as analysed in one study. One study showed that scapular spine strain was significantly increased with a more posteriorly oriented acromion (55° vs. 43°; p < 0.001). Another study showed that the transection of the coracoacromial ligament increased scapular spine strain in all abduction angles (p < 0.05). CONCLUSIONS: Glenoid lateralization was consistently associated with increased acromial and scapular spine strain, whereas inferiorization of the glenosphere reduced strain in the biomechanical studies analysed in this systematic review. Humeral-sided lateralization may increase or decrease acromial or scapular spine strain. Independent of different design parameters, the transection of the coracoacromial ligament resulted in significantly increased strains and scapular spine strains were also increased when the acromion was more posteriorly oriented. The results found in this systematic review of biomechanical in-silico and in-vitro studies may help in the surgical planning of RTSA to mitigate complications associated with acromion and scapular spine fracture.